by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Shoe Cover with Tyvek Sole. 5″ High. Serged Seams. White.
ATTRIBUTES
Full Part Number TY450SWH 0200 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Shoe Cover
Seam Serged
Color White
Quantity/Box 200 per case
Sizes 00
Option Codes 00
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE BOOT LENGTH BOOT HEIGHT
UNI 17 1/2 5
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: FEBRUARY 18, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Bib Apron. 28″ x 36″. Neck Loop & Waist Ties. Bound Seams. White.
ATTRIBUTES
Full Part Number TY273BWH0100 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Bib Apron
Seam Bound
Color White
Quantity/Box 100 per case
Sizes 00
Option Codes 00
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE BODY LENGTH BODY WIDTH
UNI 35 3/4 27
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: FEBRUARY 18, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Coverall. Comfort Fit Design. Collar. Stormflap. Open Wrists and Ankles. Elastic Waist.
Serged Seams. Pin Lock Slider Zipper Pull. White.
ATTRIBUTES
Full Part Number TY120SWH0025 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Coverall w/ Open Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case
Sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes VP,00,NF
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE SLEEVE LENGTH CHEST WIDTH INSEAM FITS CHEST FITS HEIGHT
MD 34 25 28 1/2 36 3/4 – 40 1/4 5’0″ – 5’7″
LG 35 1/2 26 1/2 29 1/2 39 3/4 – 43 1/4 5’5″ – 5’9″
XL 37 28 30 42 3/4 – 46 1/4 5’8″ – 6’2″
2X 38 1/2 29 1/4 31 45 1/4 – 48 3/4 6’0″ – 6’4″
3X 38 1/2 31 1/4 32 49 1/4 – 52 3/4 6’2″ – 6’4″
4X 39 33 33 52 3/4 – 56 1/4 6’4″ – 6’7″
5X 40 34 1/2 34 55 3/4 – 59 1/4 6’7″ – 6’10”
6X 41 1/2 36 1/4 35 59 1/4 – 62 3/4 6’9″ – 7’1″
7X 42 1/2 37 1/2 36 61 3/4 – 65 1/4 7’0″ – 7’4″
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: JULY 16, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Coverall. Comfort Fit Design. Collar. Stormflap. Open Wrists and Ankles. Elastic Waist.
Serged Seams. Pin Lock Slider Zipper Pull. White.
ATTRIBUTES
Full Part Number TY120SWH0025 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Coverall w/ Open Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case
Sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes VP,00,NF
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE SLEEVE LENGTH CHEST WIDTH INSEAM FITS CHEST FITS HEIGHT
MD 34 25 28 1/2 36 3/4 – 40 1/4 5’0″ – 5’7″
LG 35 1/2 26 1/2 29 1/2 39 3/4 – 43 1/4 5’5″ – 5’9″
XL 37 28 30 42 3/4 – 46 1/4 5’8″ – 6’2″
2X 38 1/2 29 1/4 31 45 1/4 – 48 3/4 6’0″ – 6’4″
3X 38 1/2 31 1/4 32 49 1/4 – 52 3/4 6’2″ – 6’4″
4X 39 33 33 52 3/4 – 56 1/4 6’4″ – 6’7″
5X 40 34 1/2 34 55 3/4 – 59 1/4 6’7″ – 6’10”
6X 41 1/2 36 1/4 35 59 1/4 – 62 3/4 6’9″ – 7’1″
7X 42 1/2 37 1/2 36 61 3/4 – 65 1/4 7’0″ – 7’4″
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: JULY 16, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Coverall. Comfort Fit Design. Collar. Stormflap. Open Wrists and Ankles. Elastic Waist.
Serged Seams. Pin Lock Slider Zipper Pull. White.
ATTRIBUTES
Full Part Number TY120SWH0025 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Coverall w/ Open Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case
Sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes VP,00,NF
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE SLEEVE LENGTH CHEST WIDTH INSEAM FITS CHEST FITS HEIGHT
MD 34 25 28 1/2 36 3/4 – 40 1/4 5’0″ – 5’7″
LG 35 1/2 26 1/2 29 1/2 39 3/4 – 43 1/4 5’5″ – 5’9″
XL 37 28 30 42 3/4 – 46 1/4 5’8″ – 6’2″
2X 38 1/2 29 1/4 31 45 1/4 – 48 3/4 6’0″ – 6’4″
3X 38 1/2 31 1/4 32 49 1/4 – 52 3/4 6’2″ – 6’4″
4X 39 33 33 52 3/4 – 56 1/4 6’4″ – 6’7″
5X 40 34 1/2 34 55 3/4 – 59 1/4 6’7″ – 6’10”
6X 41 1/2 36 1/4 35 59 1/4 – 62 3/4 6’9″ – 7’1″
7X 42 1/2 37 1/2 36 61 3/4 – 65 1/4 7’0″ – 7’4″
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: JULY 16, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Coverall. Comfort Fit Design. Collar. Stormflap. Open Wrists and Ankles. Elastic Waist.
Serged Seams. Pin Lock Slider Zipper Pull. White.
ATTRIBUTES
Full Part Number TY120SWH0025 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Coverall w/ Open Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case
Sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes VP,00,NF
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE SLEEVE LENGTH CHEST WIDTH INSEAM FITS CHEST FITS HEIGHT
MD 34 25 28 1/2 36 3/4 – 40 1/4 5’0″ – 5’7″
LG 35 1/2 26 1/2 29 1/2 39 3/4 – 43 1/4 5’5″ – 5’9″
XL 37 28 30 42 3/4 – 46 1/4 5’8″ – 6’2″
2X 38 1/2 29 1/4 31 45 1/4 – 48 3/4 6’0″ – 6’4″
3X 38 1/2 31 1/4 32 49 1/4 – 52 3/4 6’2″ – 6’4″
4X 39 33 33 52 3/4 – 56 1/4 6’4″ – 6’7″
5X 40 34 1/2 34 55 3/4 – 59 1/4 6’7″ – 6’10”
6X 41 1/2 36 1/4 35 59 1/4 – 62 3/4 6’9″ – 7’1″
7X 42 1/2 37 1/2 36 61 3/4 – 65 1/4 7’0″ – 7’4″
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: JULY 16, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
1 of 2
PRODUCT INFORMATION
DuPont Tyvek 400 Coverall. Comfort Fit Design. Collar. Stormflap. Open Wrists and Ankles. Elastic Waist.
Serged Seams. Pin Lock Slider Zipper Pull. White.
ATTRIBUTES
Full Part Number TY120SWH0025 (=size;=option code) xx yyxx yy
Fabric/Materials TYVEK 400
Design Coverall w/ Open Wrists and Ankles
Seam Serged
Color White
Quantity/Box 25 per case
Sizes MD, LG, XL, 2X, 3X, 4X, 5X, 6X, 7X
Option Codes VP,00,NF
DUPONT TYVEK 400
TECHNICAL DATA SHEET
SIZE TABLE
SIZE SLEEVE LENGTH CHEST WIDTH INSEAM FITS CHEST FITS HEIGHT
MD 34 25 28 1/2 36 3/4 – 40 1/4 5’0″ – 5’7″
LG 35 1/2 26 1/2 29 1/2 39 3/4 – 43 1/4 5’5″ – 5’9″
XL 37 28 30 42 3/4 – 46 1/4 5’8″ – 6’2″
2X 38 1/2 29 1/4 31 45 1/4 – 48 3/4 6’0″ – 6’4″
3X 38 1/2 31 1/4 32 49 1/4 – 52 3/4 6’2″ – 6’4″
4X 39 33 33 52 3/4 – 56 1/4 6’4″ – 6’7″
5X 40 34 1/2 34 55 3/4 – 59 1/4 6’7″ – 6’10”
6X 41 1/2 36 1/4 35 59 1/4 – 62 3/4 6’9″ – 7’1″
7X 42 1/2 37 1/2 36 61 3/4 – 65 1/4 7’0″ – 7’4″
2 of 2
PHYSICAL PROPERTIES
PROPERTY TEST METHOD TYPICAL RESULT
Thickness ASTM D1777 5.9 mils
Basis Weight ASTM D3776 1.2 oz/yd
2
Burst Strength – Mullen ASTM D774 50 psi
Seam Strength ASTM D1683 > 19 lb
f
Breaking Strength – Grab (MD) ASTM D5034 18 lb/in
f
Breaking Strength – Grab (CD) ASTM D5034 22 lb/in
f
Hydrostatic Head AATCC 127 45 inches HO
2
Surface Resistivity (23 C / 25% RH). EN 1149-1 <2.5 x 10^9 ohms
Wearing Apparel Flammability
16 CFR 1610
Class 1
WARNING
*Serged and bound seams are degraded by some hazardous liquid chemicals, such as strong acids, and should not be worn when these chemicals are present.
*Liquid barrier performance varies based on the amount of liquid that may get on the garment, the length of time the liquid is on the garment, applied pressure
and certain physical properties of the liquid. Tyvek 400, Tyvek 400 D, ProShield , ProShield 10, ProShield 60, Tyvek 400 FC, and ProShield 70 garments
are not appropriate if during use they are getting wet (liquid is dripping or running, or it is wet to the touch) or if spotting is observed on skin or garments worn
under the protective garment. Tyvek 500 and Tyvek 600 offer improved liquid barrier, but may not be appropriate if spotting is observed on the skin or
garments worn under the protective garment. In applications where a higher liquid barrier is needed, consider Tychem 2000 and Tychem 4000 garments with
taped seams.
Tyvek 600 and Tyvek 500 fabric have different fabric physical properties and improved chemical resistance properties than standard Tyvek 400 garments.
**Garments made using Tyvek 400, Tyvek 500, Tyvek 600 and Tyvek 800 fabrics will burn and possibly melt. None of these garments should be worn near
heat, open flames, sparks or any other possible ignition source nor should they be worn in potentially explosive or flammable environments. If these garments do
burn or melt while being worn, it may increase the severity of burn injuries even when worn over garments which are flame resistant, including, but not limited
to, Nomex IIIA or Nomex Comfort garments.
*CAUTION: This information is based upon technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and experience are
gained. DuPont makes no guarantee of results and assumes no obligation or liability in connection with this information. It is the user's responsibility to
determine the level of toxicity and the proper personal protective equipment needed. The information set forth herein reflects laboratory performance of fabrics,
not complete garments, under controlled conditions. It is intended for informational use by persons having technical skill for evaluation under their specific end-
use conditions, at their own discretion and risk. Anyone intending to use this information should first verify that the garment selected is suitable for the intended
use. In many cases, seams and closures have shorter breakthrough times and higher permeation rates than the fabric. Please contact DuPont for specific data. If
fabric becomes torn, abraded or punctured, or if seams or closures fail, or if attached gloves, visors, etc. are damaged, end user should discontinue use of garment
to avoid potential exposure to chemical. Since conditions of use are outside our control, we make no warranties, express or implied, including, without limitation,
no warranties of merchantability or fitness for a particular use and assume no liability in connection with any use of this information. This information is not
intended as a license to operate under or a recommendation to infringe any patent or technical information of DuPont or others covering any material or its use.
Cellosolve and Selexol are registered trademarks of Dow Chemicals Company. Skydrol is a registered trademark of Solutia.
Tyvek friction-coated shoe covers or Tyvek garments with attached friction-coated skid-resistant shoe covers might contain silicone in the shoe-cover. This
includes styles TY122, TY121, FC450 and FC454. End users who are consuming these styles and who have concerns about silicone contamination should conduct
their own testing to ensure they are suitable for their application(s).
Tyvek 500, Tyvek 600, Tyvek 800 products manufactured before January 2023 did contain natural rubber latex which may cause allergic reactions in some
sensitized individuals. Anyone who begins to exhibit an allergic response during the use of DuPont products should immediately cease using these products. The
incident should also be reported to DuPont at +1 (888) 439-2988 so that an investigation can be initiated.
CREATED ON: JULY 16, 2025
2024 DuPont. All rights reserved. DuPont , the DuPont Oval Logo, and all trademarks and service marks denoted with , or are owned by affiliates of
SM
DuPont de Nemours, Inc. unless otherwise noted.
DUPONT TYVEK 400
TECHNICAL DATA SHEET
Our powerful web-based tool
can assist you with finding the
appropriate DuPont garments
for chemical and controlled
environment hazards.
DuPont SafeSPEC - We're here to help
DuPont Personal Protection
SafeSPEC
DuPont Personal Protection
DuPont Personal Protection
by | Sep 27, 2025
PRODUCT PROPERTIES
All time calculations are based on temperatures of 77 F, 25 C
Lab tested with Norox 925
Viscosity
Brookfield RVF, Spindle #2 at 20 rpm 540-680 cps
Thixotropic Index Minimum 3.0
Gel Time
Based on 100g mass catalyzed at 2% MEKP
15 – 18 minutes
Weight per gallon 8.85 lbs
Coverage per gallon, 20 mil thickness 80 sq ft
Maximum VOC
VOC in use
362 g/l
< 232 g/l *
KEY USES
Exterior carbon fiber
parts
Exterior fiberglass parts
Multiple marine
applications (above
waterline)
Outdoor wood furniture
Duratec SunShield Clear Polyester Topcoat represents a breakthrough in
polyester clear coat technology. The topcoat resists yellowing in sunlight;
no sun blocking urethane is required for exterior use. The topcoat
provides a high quality finish with good chemical resistance. This product
has been specially formulated to be easy to sand and polish.
FEATURES
UV RESISTANCE
Resists yellowing when exposed
to sunlight.
EASY APPLICATION
This product is easy to apply and
sand.
PRE-PROMOTED
For safety, consistency and easy
use. Air-cure with no wax
required.
HIGH GLOSS
Polishes to a high gloss wet
look surface.
CHEMICAL RESISTANCE
Highly cross-linked coating
provides excellent chemical
resistance.
STRENGTH & FLEXIBILITY
Excellent flexibility and impact
resistance.
CLEAR SUNSHIELD
POLYESTER TOPCOAT
PRODUCT #904-061
S
AFETY & HANDLING
Sunshield Poly
ester Topcoat is extremely flammable. Do not apply near sparks,
open flames or heat. Keep area ventilated. Do not smoke. Av
oid continuous
breathing of vapor. Sunshield contains ingredients which could be harmful if
mishandled. Contact with skin and eyes should be avoided and necessary
protective equipment and clothi ng should be worn. Individual s
should wash with
soap and water befor e eating or drinking. A ll containers
should be properly labeled
to prevent accidental ingestion or improper disposal. Individuals should resea l any
partly
used material back in the container. Store under cool, dry conditions and
away from open flames
and high temperatures.
For more detailed instructions on storage, please see the MSDS sheet.
DESCRIPTION
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.DURATEC1.COM
*Note: based on calculations using the UEF table to determine styrene emissions. Local
regulations vary. Consult your local AQMD to confirm actual VOC in use.
CLEAR SUNSHIELD
POLYESTER TOPCOAT
APPLICATION GUIDE | PRODUCT #904-061
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech Team at (909) 546-1160 with any questions.
PLEASE NOTE www.duratec1.com
Prepare & Catalyze
Temperature should be at least 64 F for both the product and the part. Mix Duratec with either a paint
shaker or a drill-mounted mixer. A paint stir stick will not be enough.
Catalyze the Duratec at 2.0 % by weight with a low hydrogen peroxide MEKP, like Norox 925. Only
catalyze what can be used in 12 minutes.
Sunshield is best applied by spraying. We
recommend HVLP air-assisted spray guns. A 1.6 - 1.8mm tip
is recommended. Use 34-40 psi air pressure. Adjust the needle and fan to provide the proper spray.
Additional solvent is not needed for most spray guns. If thinning is required, we suggest the use of
Duratec 39UCE Reducer.
Apply
Option #1: In-Mold Prior to Laminating
Ensure mold is clean and free of silicone. When sprayed in-mold Sunshield we suggest use of a wax mold
release agent like TR108 or honey wax rather than or in conjunction with semi-perm release agents. This
will allow the proper surface tension essential for Sunshield to level and ow across the in-mold surface.
Adjust uid pressure and atomizing air to achieve an even pattern with fne droplets prior to spraying the mold.
The frst pass should be a dust coat that sets up for two minutes before further application. The dust coat
should be a light fog, not a continuous flm.
Additional coats of 4-5 mils can be applied, again allowing a minimum of two minutes to out-gas. Twelve mils
will provide a nice fnish with UV protection. Up to 22 mils can be applied if the part requires aggressive post
sanding.
The coating needs to be tacky free for each build coat to bond. Laminate polyesters and vinyl esters when the
Duratec has set up and does not transfer, but retains some tack. Cure time varies with temperature and air ow.
For epoxy laminating systems, a tack free surface is required. Increased heat up to 120 F will speed this process.
Remember the adhesion comes from the epoxy. Test the bond between the Duratec and your epoxy blend to
assure good adhesion.
W
WW.DURATEC1.COM 909-546-1160 HAWKEYESALES@HAWK EYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
CLEAR SUNSHIELD
POLYESTER TOPCOAT
APPLICATION GUIDE | PRODUCT #904-061
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech Team at (909) 546-1160 with any questions.
PLEASE NOTE
Apply www.duratec1.com
Option #2: Finishing Parts
NOTE: For epoxy laminate, water washing with clean water and a heavy duty scrub sponge pad is
necessary before and after sanding. It is not necessary to water wash polyester or vinyl ester laminates.
Abrade the entire surface with 180 grit, providing mechanical tooth. Remove dust and acetone-wipe the surface.
Set up gun, mix, and catalyze as previously mentioned.
Pro Tip: Sunshield can by applied by brush or roller when topcoating wood.
The Duratec may need to be mechanically forced into severe porosity. The frst 2-3 mil passes can be worked with
a squeegee to fll the holes.
Additional coats can be applied after two minutes and while the surface is still tacky.
If re-coating the full cured Duratec is necessary, frst sand with 180 grit.
The fnal spray should be sanded with 400 grit and allowed to cure for 8 hours prior to fnal polishing.
WWW.DURATEC1.COM 909-546-1160 HAWKEYESALES@HA
WKEYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316
Limited/ warranty statement: Our products are intended for sale to industrial and commercial customers. We request that customers inspect and test our
products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, expressed or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent to be inferred. All patent rights are reserved. The exclusive remedy for all
proven claims is replacement of our materials and in no event shall we be liable for special, incidental or consequential damages.
CLEAR SUNSHIELD
POLYESTER TOPCOAT
TROUBLESHOOTING | PRODUCT #904-061
Problem Cause Solution
Alligatoring
Not enough catalyst used.
Substrate/primer incompatibility or
chemical reaction.
Check for proper catalyst levels.
Expose surface to higher temperature
before spraying when ambient temp
of below 64 F
, 18 C.
Product sprayed on cold surface.
Check compatibility of surface of product.
Cracking Product sprayed too thickly, too fast.
Increase the number of passes,
adding dwell time between coats.
Dimples (Craters)
Film build up too rapid, solvent
trapped in product.
Increase the number of passes to achieve
desired thickness. Allow for ash o
between passes.
Fisheyes
Substrate contaminated.
Do not use a tack rag . Ensure rag does
not leave contaminant on surface.
Spray in a clean area to minimize airborne
dust, water, waxes, and/or silicones.
Spray with dry fltered air.
Contamination in the air.
Contamination in the line.
Orange Peel
Spray equipment set up incorrectly.
Spray pressure incorrect.
Pot pressure incorrect.
Follow the instructions for equipment
set up.
Set pressure at 34-40 psi.
Set pressure at 10-12 psi.
Pattern surface
sticks to mold
upon release
Pinholes
Porosity
Improper release preparation.
Follow manufacturer s instructions
when applying release materials.
Primer not fully cured before
compounding and polishing.
Excess gel time for tooling gel coat.
Substrate porosity.
Fill porous areas with product using
squeegee, brush or roller before spraying.
Follow instructions in the application
guide for pattern surfacing.
Follow manufacturer s recs for gel time
Acetone used as thinner.
Spray pressure too high.
Spray orifce too small.
Reduce pressure to 34-40 psi.
Use larger orifce.
Use slower solvent such as Duratec
Reducer or MEK
Not using silicone free paste waxUse a silicone free paste wax, like TR 108
by | Sep 27, 2025
PRODUCT PROPERTIES
All time calculations are based on temperatures of 77 F, 25 C
Lab tested with Norox 925 MEKP
Viscosity, #2 spindle, RVF, 20 rpm 390-450 cps
Thixotropic Index min. 3.5
Gel time @ 2% MEKP 17-21 minutes
Weight per gallon 8.68 lbs/gal
Coverage per gallon @ 20 mils 80 sq. feet
KEY USES
Wood and MDF
substrates
Automotive dashboards
Cabinets and furniture
Marine and aircraft
interiors
Musical instruments
A high-build, easy-sand coating designed as a topcoat for cured p olyester,
polyurethan
e and lacquer clear
or color coats. You
will get a superior finish, add
quality and save tim
e and labor with Durat
ec Hi-Gloss Topcoat.
DURATEC CLEAR
HI-GLOSS TOPCOAT
PRODUCT # 904- 046
SAFETY &
HANDLING
Duratec Clear Hi-G loss Topco
at is extremely flammable. Do not apply near
sparks, op
en flames or heat. Keep area ventilated. Do no t smoke. Avoid
continuo
us breathing of vapor. Duratec Clear Hi-Gloss Topcoat co ntains
ing
redients which could be harmful if mishan dled. Co ntact with skin and eyes
should be avoided and necessary
protective equipment and clothin g should b e
worn. Individuals should wash
with soap and water before eating or drinking. All
containers shou
ld be properly labeled to prevent accidental ingestion o r improper
disposal. Individuals sh
ould reseal any partly used material back in the container.
Store under cool,
dry conditions and away from open flames and high
temperatures.
For more
detailed instructions on storage, please see the MSDS sheet.
Liability/
warranty statement: Our products are intended for sale to industrial and commercial customers. We request that
cust
omers inspect and test our products before use and satisfy themselves as to contents and suitability. All claim requests
must
be made in writing and are subject to review, including storage temperature verification and retain evaluations. The
e
xclusive remedy for all proven claims is replacement of our materials. In no event shall we be liable for special, incidental or
con
sequential damages, including damages caused in transit (exworks terms). Nothing herein shall constitute a warranty,
exp
ressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be
in
ferred. All patent and trademark rights are reserved.
DESCRIPTION
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
FEATURES
EASY TO APPLY
Sprayable and quick building, to
10-15 mils, 250-375 microns
thickness.
HIGH GLOSS
Sands easily and polishes to a
non-wax, tackfree high gloss
finish.
ELONGATION/FLEX
Originally designed to work with
wood, this clear offers slightly
more flex than other topcoats.
EASILY TOPCOATED
Can be top coated with lacquers,
enamels, polyurethanes,
varnishes, etc.
to achieve high-
gloss or low
-lust, hand rubbed
finishes.
COMPATIBILITY
Compatible with wood, polyester,
vinyl ester, and most epoxy
substrates.
OTHER CLEAR OPTIONS
904-061 CLEAR SUNSHIELD
(A UV RESISTANT OPTION)
904-040 HI-GLOSS COATING
REVISED JULY 2021
(LESS FLEX, HIGHER DURABILITY)
REVISED
FEBRUARYY 2023
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech Team at (909) 546-1160 with any questions.
PLEASE NOTE
WWW.HAWKEYEIND 909-546-1160 HAWKEYESALES@HAWKE
YEIND.COM PO BOX 415, BLOOMINGTON, CA 92316L La E Ll Lty warranty Vtatement Our product V are Lntended Ior Vale to Lndu Vtr Lal and commerc Lal cu Vtomer V. :e re Tue Vt t Kat cu Vtomer V Ln Vpect and te Vt our product V Ee Iore u Ve and Vat L V Iy
t Kem Vel Ye V a V to content V and Vu Lta E Ll Lty. All cla Lm re Tue Vt V mu Vt Ee made Ln wr Lt Ln J and are Vu E Mect to re Y Lew Lnclud Ln J Vtora Je temperature Yer L I Lcat Lon and reta Ln e Yaluat Lon V. T Ke
exclusive remedy for all proven claims is replacement of our materials. In no event shall we be liable for special, incidental or consequential damages, including damages caused in transit
e [wor N V term V . Not K Ln J Kere Ln V Kall con Vt Ltute a warranty e [pre V Ved or Lmpl Led Lnclud Ln J any warranty o I merc Kanta E Ll Lty or I Ltne V V nor L V protect Lon Irom any law or patent to Ee
inferred. All patent and trademark rights are reserved.
yyy0hawkeyeind0eqo
Prepare & Catalyze
Temperature should be at least 64 F for both the product and the part.
Mix with either a paint shaker or a drill-mounted mixer. A paint stir stick will not be enough for a proper mix.
Catalyze the Duratec at 2.0 % by weight with a full strength MEKP, like Norox 925. Catalyze only an
amount that can be sprayed in 15 minutes, typically about a quart if using a HVLP spray gun. Mix well.
Apply
Duratec Hi-Gloss Topcoat should be applied by spraying. We recommend HVLP air-assisted spray guns.
Epoxy laminates should be washed with clean water and a heavy duty scrub sponge before and after
sanding. It is not necessary to water wash polyester, vinyl ester, or wood substrates. Abrade the entire
substrate surface with 180-grit to ensure proper mechanical adhesion. Wipe with a clean cloth. Do not use a
tack rag.
A 1.8 mm tip is recommended. Use 34-40 psi air pressure (at the gun). Adjust the needle and fan to provide
the proper spray. Use the lowest pressures possible to minimize orange peel.
The first coat should be a light dust coat. The
dust coating does not completely cover the surface. Wait at
least two minutes, and apply another light coat. Continue to make build passes of 4-6 mils, with two minute
intervals, until about 20 mils of product is on the surface.
Allow to cure at room temperature for at least one hour. At that time, cure can be accelerated by putting the
part in a warm room at 120 F.
Sand
Once the surface is fully cured, sand to remove any texture or orange peel. Use as fine a grit of paper as
is reasonable. Continue sanding with progressively finer grits, up to 1000 grit paper Allow at least eight
hours after sanding before re-coating or before polishing begins.
Compound and polish to high gloss. We recommend Aqua Buff 1000W or 1000F, followed by Aqua Buff
2000.
DURATEC CLEAR
HI-GLOSS TOPCOAT
APPLICATION GUIDE # 904 – 04 6
Problem Cause Solution
Alligatoring
Not enough catalyst used.
Substrate/primer incompatibility or
chemical reaction.
Check for proper catalyst levels.
Expose surface to higher temperature
before spraying when ambient temp
is below 64 F, 18 C.
Product sprayed on cold surface.
Check compatibility of surface of product.
Curing on surface but
not on substrate
Coating sprayed on cold surface
Expose substrate to higher temperture
before spraying.
Dimples (Craters)
Film build up too rapid, solvent
trapped in product.
Increase the number of passes to achieve
desired thickness. Allow for ash o
between passes.
Fisheyes
Substrate contaminated.
Do not use a tack rag . Ensure rag does
not leave contaminant on surface.
Spray in a clean area to minimize airborne
dust, water, waxes, and/or silicones.
Spray with dry ltered air.
Contamination in the air.
Contamination in the line.
Orange Peel
Spray equipment set up incorrectly.
Spray pressure incorrect.
Pot pressure incorrect.
Follow the instructions for equipment
set up.
Set pressure at 34-40 psi.
Set pressure at 10-12 psi.
Pinholes
Porosity
Substrate porosity.
Fill porous areas with product using
squeegee, brush or roller before spraying.
Acetone used as thinner.
Spray pressure too high.
Spray ori ce too small.
Reduce pressure to 34-40 psi.
Use larger ori ce.
Use slower solvent such as MEK or
Duratec Reducer
Surface not hard
or glossy
Coating not allowed to breathe after sanding
Allow time for solvents to escape before compounding and polishing.
Low reactivity catalyst used / coating under catalyzed.
Catalyze at 2% with full strength MEKP. Do not use 30 percent MEKP or catalyst with less than 8.8 percent active oygen.
DURATEC CLEAR
HI-GLOSS TOPCOAT
TROUBLESHOOTING | PRODUCT 904-046
See the Liability and Warranty Statement on Page 1
by | Sep 27, 2025
PRODUCT PROPERTIES
All time calculations are based on temperatures of 77 F, 25 C
Lab tested with Norox 925 MEKP
Viscosity, #2 spindle, RVF, 20 rpm 420-480 cps
Thixotropic Index min. 2.5
Gel time @ 2% MEKP 8-11 minutes
Weight per gallon 8.4 lbs/gal (approx)
Coverage per gallon @ 20 mils 80 sq. feet
KEY USES
A high-b uild, easy-s and coating designed as a
topcoat for cured polyester,
polyurethane and lacquer clear or
color coats. You will get a superior
finish,
add quality and save time and labor wit
h Duratec Hi-G loss Coating.
FEATURES
EASY TO APPLY
Sprayable and quick building, to
10-15 mils, 250-375 microns
thickness.
DURATEC CLEAR
HI-GLOSS COATING
PRODUCT # 904- 040
S
AFETY & HANDLING
Duratec Clear Hi-Gl o
ss Coating is extremely flammable. Do not apply near sparks,
open
flames or heat. Keep area ventilated. Do not smoke. Avoid continuous
breathing
of vapor. Duratec Clear Hi-G loss Coating contain s ingredients which
could be harmful if mishan
dled. Co ntact with skin and eyes sh ould be avoided and
necessary
protective equipmen t and clothing should be worn. Individuals should
wash with soap and water before
eating or drinking. All containers sh ould be
properly labeled to prevent accidental ingestion o
r improper d isposal. Individuals
should
reseal any partly used material back in the contain er. Store und er cool, dry
conditions and away
from op en flames and high temperatures.
For more detailed instructions on
storage, please see the MSDS sheet.
Liability/warranty statement: Our products are intended for sale to industrial and commercial customers. We request that
customers inspect and test our products before use and satisfy themselves as to contents and suitability. All claim requests
must be made in writing and are subject to review, including storage temperature verification and retain evaluations. The
exclusive remedy for all proven claims is replacement of our materials. In no event shall we be liable for special, incidental or
consequential damages, including damages caused in transit (exworks terms). Nothing herein shall constitute a warranty,
expressed or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent to be
inferred. All patent and trademark rights are reserved.
DESCRIPTION
909-546-1160
hawkeyesales@hawkeyeind.com
PO BOX 415,
BLOOMINGTON, CA 92316
WWW.HAWKEYEIND.COM
COLOR OPTIONS
Black (602-021)
White (614-02 1)
Composite plugs &
patterns.
Automotive dashboards
Cabinets and furniture
Marine and
aircraft
interiors
Upgrading tooling gelcoats
HIGH GLOSS
Sands
easily and polishes to a
non
-wax, tackfree high gloss
finish.
RESIST
S FISHEYES Unique
additives
reduce the risk of
fi
sheyes and pinhol es during the
s
pray application.
ULTIMATE DURABILITY
Coating produced a hard, durable
surface with fantastic scratch
resistance for high-use areas.
COMPATIBILITY
Compatible with wood, polyester,
vinyl ester, and most epoxy
substrates.
REVISED FEBRUARY 2023
DURATEC CLEAR
HI-GLOSS COATING
APPLIC ATION GUIDE | PR ODUC T #904-040
The following use instructions are broad to address multiple applications. We recommend testing for product
compatability with your process. Please contact our Tech Team at (909) 546-1160 with any questions.
PLEASE NOTE
WWW.HAWKEYEIND.COM 909-546-1160 HAWKEYESALES@HAWK
EYEIND.COM PO BOX 415, BLOOMINGTON, CA 92316Lia Eili Wy wa U Uan Wy s Wa Wemen W O X U S Uod Xc Ws a Ue in Wended Io U sale Wo ind Xs W Uial and comme Ucial c Xs Wome Us. We Ue T Xes W Wha W c Xs Wome Us ins Sec W and Wes W o X U S Uod Xc Ws Ee Io Ue Xse and sa Wis Iy
Whemsel Yes as Wo con Wen Ws and s Xi Wa Eili Wy. All claim Ue T Xes Ws m Xs W Ee made in w Ui Win J and a Ue s X E Mec W Wo Ue Yiew, incl Xdin J s Wo Ua Je Wem Se Ua W X Ue Ye Ui Iica Wion and Ue Wain e Yal Xa Wions. The
e [cl Xsi Ye Uemedy Io U all S Uo Yen claims is Ue Slacemen W o I o X U ma We Uials. In no e Yen W shall we Ee lia Ele Io U s Secial, inciden Wal o U conse T Xen Wial dama Jes, incl Xdin J dama Jes ca Xsed in W Uansi W
e [wo Uks We Ums . No Whin J he Uein shall cons Wi W X We a wa U Uan Wy, e [ S Uessed o U im Slied, incl Xdin J any wa U Uan Wy o I me Uchan Wa Eili Wy o U Ii Wness, no U is S Uo Wec Wion I Uom any law o U Sa Wen W Wo Ee
in Ie U Ued. All Sa Wen W and W Uadema Uk Ui Jh Ws a Ue Uese U Yed.
www.hawkeyeind.com
Prepare & Catalyze
Temperature should be at least 64 F for both the product and the part.
Mix with either a paint shaker or a drill-mounted mixer. A paint stir stick will not be enough for a proper mix.
Catalyze the Duratec at 2.0 % by weight with a full strength MEKP, like Norox 925. Catalyze only an
amount that can be sprayed in 15 minutes, typically about a quart if using a HVLP spray gun. Mix well.
Apply
Duratec Hi-Gloss Coating should be applied by spraying. We recommend HVLP air-assisted spray guns.
Epoxy laminates should be washed with clean water and a heavy duty scrub sponge before and after
sanding. It is not necessary to water wash polyester, vinyl ester, or wood substrates. Abrade the entire
substrate surface with 180-grit to ensure proper mechanical adhesion. Wipe with a clean cloth. Do not use a
tack rag.
A 1.8 mm tip is recommended. Use 34-40 psi air pressure (at the gun). Adjust the needle and fan to provide
the proper spray. Use the lowest pressures possible to minimize orange peel.
The first coat should be a light dust coat. The dust coating does not completely cover the surface. Wait at
least two minutes, and apply another light coat. Continue to make build passes of 4-6 mils, with two minute
intervals, until about 20 mils of product is on the surface.
Allow to cure at room temperature for at least one hour. At that time, cure can be accelerated by putting the
part in a warm room at 120 F
.
Sand
Once the surface is fully cured, sand to remove any texture or orange peel. Use as fine a grit of paper as
is reasonable. Continue sanding with progressively finer grits, up to 1000 grit paper Allow at least eight
hours after sanding before re-coating or before polishing begins.
Compound and polish to high gloss. We recommend Aqua Buff 1000W or 1000F, followed by Aqua Buff
2000.
DURATEC CLEAR
HI-GLOSS COATING
TROUBLESHOOTING | PRODUC T #9
04-040
Problem Cause Solution
Alligatoring
Not enough catalyst used.
Substrate/primer incompatibility or
chemical reaction.
Check for proper catalyst levels.
Expose surface to higher
temperature before spraying when
ambient temp is below 64 F, 18 C.
Product sprayed on cold surface.
Check compatibility of surface of product.
Curing on surface but
not on substrate
Coating sprayed on cold surface
Expose substrate to higher temperture
before spraying.
Dimples (Craters)
Film build up too rapid, solvent
trapped in product.
Increase the number of passes to achieve
desired thickness. Allow for ash o
between passes.
Fisheyes
Substrate contaminated.
Do not use a tack rag . Ensure rag does
not leave contaminant on surface.
Spray in a clean area to minimize airborne
dust, water, waxes, and/or silicones.
Spray with dry fltered air.
Contamination in the air.
Contamination in the line.
Orange Peel
Spray equipment set up incorrectly.
Spray pressure incorrect.
Pot pressure incorrect.
Follow the instructions for equipment
set up.
Set pressure at 34-40 psi.
Set pressure at 10-12 psi.
Pinholes
Porosity
Substrate porosity.
Fill porous areas with product using
squeegee, brush or roller before spraying.
Acetone used as thinner.
Spray pressure too high.
Spray orifce too small.
Reduce pressure to 34-40 psi.
Use larger orifce.
Use slower solvent such as MEK or
Duratec Reducer
Surface not hard
or glossy
Coating not allowed to breathe after sanding
Allow time for solvents to escape before compounding and polishing.
Low reactivity catalyst used / coating under catalyzed.
Catalyze at 2% with full strength MEKP. Do not use 30 percent MEKP or catalyst with less than 8.8 percent active oygen.
See the Liability and Warranty Statement on Page 1
