by | Sep 27, 2025
PRODUCT DATA SHEET
Aerospace |Electronics |Medical| Automotive |Construction |Rail |Marine
CUSTOMER SUPPORT
PHONE
(949) 623-4400
EMAIL
Support@AxiomMaterials.com
WEBSITE
www.AxiomMaterials.com
FAX
(949) 261-6009
AXIOM MATERIALS, Inc.
2320 Pullman St.
Santa Ana, CA 92705
Flame Retardant Epoxy Fiberglass Prepreg, 250 F Cure
Typical ApplicationsProduct Description
AX-3201FR is a 250 F (121 C) curing
epoxy fiberglass prepregdesigned to
produce composite components using
either vacuum bag oven or autoclave
cure cycles. The prepreg system is ideal
for multi-ply laminates requiring flame
retardanceand a cosmetic finish. Parts
built with AX-3201FR exhibit good high
thermal and UV stability as well as
resistance to water and common
industrial fluids. Solvent-free hot melt
processing provides AX-3201FR with
volatile-free curing and handling. The
recommended service temperature
envelope for AX-3201FR is -67 (-55 C) to
250 F (121 C).
AX-3201FR is available on virtually all
woven fiberglass fabric styles (e.g.108,
120, 7781, etc.) and at virtually any
requested resin content.
Standard resin content:
39% by weight (7781 style)
Standard tack: High
Coating: 1 or 2 side tack
Flame retardant components
High clarity, void-free, smooth surface
High toughness / strength composite
laminates vacuum bag
Automotive parts and components with a
show-room surface
Aerospace parts & components with no fill
and fair required
High surface quality sporting goods
AX-3201FR
Packaging
Standard Widths:
50 (127 cm)
60 (152 cm)
Standard Roll Length:
60 LY (55 m)
Other lengths and widths available
Our products are flexible by design:
Additional weights, roll sizes, and reinforcements are available.
PRODUCT DATA SHEET
Aerospace |Electronics |Medical| Automotive |Construction |Rail |Marine
CUSTOMER SUPPORT
PHONE
(949) 623-4400
EMAIL
Support@AxiomMaterials.com
WEBSITE
www.AxiomMaterials.com
FAX
(949) 261-6009
AXIOM MATERIALS, Inc.
2320 Pullman St.
Santa Ana, CA 92705
Recommended Cure CyclesCure Considerations
Table 1. Average Properties
1
Property Test MethodTest Temp.AvgValue
Glass transition temperature ASTM D5279Range 303 F (151 C)
Cured ply thickness Ballmicrometer75 F (24 C)0.009 (0.23mm)
Optimum properties are achieved with the
following cycles:
Apply 10-50 psi (0.69-3.45 bar) and cure
60 minutes 250 F (121 C) OR
40 minutes at 270 F (132 C) OR
100 minutes at 235 F (113 C)
Temperature heat up and cool down
under pressure is recommended, but
not mandatory.
This prepregis vacuum-bag, platen
press, and autoclave compatible.
Peak operating temperatures
generally depend on cure temperature.
For a 250 F (121 C) cure the service
temperature envelope is -67 F (-55 C) to
250 F (121 C).
AX-3201FR
1
Tested on a 12 ply laminate AX-3201FR-7781 cured 1 hr at 250 F (121 C) 40 psi (2.76 bar).
Flame Retardant Epoxy Fiberglass Prepreg, 250 F Cure
PRODUCT DATA SHEET
Aerospace |Electronics |Medical| Automotive |Construction |Rail |Marine
CUSTOMER SUPPORT
PHONE
(949) 623-4400
EMAIL
Support@AxiomMaterials.com
WEBSITE
www.AxiomMaterials.com
FAX
(949) 261-6009
AXIOM MATERIALS, Inc.
2320 Pullman St.
Santa Ana, CA 92705
Property Test MethodTest ConditionStrength Modulus
TensilepropertiesASTMD63875 F (24 C)77 ksi(530MPa)3.9 msi(27 GPa)
ASTMD638180 F (82 C)70 ksi(483 MPa)3.6 msi(25 GPa)
Compressive propertiesASTM D69575 F (24 C)73 ksi(503 MPa)3.7 msi(26 GPa)
ASTM D695180 F (82 C)59 ksi(407 MPa)3.4 msi(23 GPa)
Flexural propertiesASTM D79075 F (24 C)99 ksi(683 MPa)4.1 msi(28 GPa)
ASTM D790180 F (82 C)82 ksi(565 MPa)3.5 msi(24 GPa)
Interlaminarshear
strength
ASTM D100275 F (24 C)9.5 ksi(66 MPa)N/T
Table 1 (ctd). Average Properties
1
Tested on a 12 plylaminate AX-3201FR-7781 cured 1 hr at 250 F (121 C) 40 psi (2.76 bar).
AX-3201FR
Flame Retardant Epoxy Fiberglass Prepreg, 250 F Cure
PRODUCT DATA SHEET
Aerospace |Electronics |Medical| Automotive |Construction |Rail |Marine
CUSTOMER SUPPORT
PHONE
(949) 623-4400
EMAIL
Support@AxiomMaterials.com
WEBSITE
www.AxiomMaterials.com
FAX
(949) 261-6009
AXIOM MATERIALS, Inc.
2320 Pullman St.
Santa Ana, CA 92705
All data is provided for informational purposes only and does not guarantee or warranty a specification for which Axiom Materials assumes legal
responsibility. Users should perform verification and testing to determine suitability for their specific process and curingconditions. Refer to the Material
Safety Data Sheet (MSDS) and label for safe use and handling instructions. This product is for industrial/commercial use and must be applied by
trained personnel only.
Handling & Safety InstructionsStorage Requirements
Store prepreg suspended horizontally to
avoid flat spots and thinning under the weight
of the roll.
Allow product sufficient time (4-6 hours) to
reach ambient temperatures after removal
from cold storage to prevent condensation on
the adhesive surface.
Use the appropriate safety equipment for
this product.
Refer to the AX-3201FR Material Safety Data
Sheet for specific safety instructions.
Cautionary Notice
In a bind? Call us anytime. We provide
fast and knowledgeable technical support:
PHONE(949) 623-4400
EMAILSupport@AxiomMaterials.com
WEBSITEwww.AxiomMaterials.com
FAX (949) 261-6009
Technical Assistance
Rev C, 3/13/23
AX-3201FR
Flame Retardant Epoxy Fiberglass Prepreg, 250 F Cure
Shelf life is from date of manufacturing
when stored at or below the following
conditions. Working life is the cumulation
of time above the storage temperature.
Table 2. Shelf and Working Life
Storage Condition AX-3201FR
ShelfLife at 0 F (-18 C)12 months
ShelfLife at 40 F (4 C) 6 months
Working Life at 75 F
(24 C)
21 days
by | Sep 27, 2025
HexForce
7500
Fiber Glass Fabric
Product Data
STYLE 7500 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/2 EC9 134 x2
Fill Yarn: ECG 37 1/2 EC9 134 x2
Fabric Weight, Dry 9.41 oz/yd
2
319 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 16/in 6.29/cm
Fill Count: 14/in 5.51/cm
Fabric Thickness 11.80 mil 0.30 mm
Breaking Strength Warp 420 lbf/in
Filling 400 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
716
Hybrid Composite Fabrics
Product Data
STYLE 716 US System
Type of Yarns Warp Yarn: 3K Carbon, 33 MSI
Fill Yarn: ECG 75 1/0
Fabric Weight, Dry 5.0 oz/yd
2
170 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 16/in
Fill Count: 16/in
Fabric Thickness 7.9 mil 0.20 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
6781
Fiber Glass Fabric
Product Data
STYLE 6781 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/0 SC9 68
Fill Yarn: SCG 75 1/0 SC9 68
Fabric Weight, Dry 8.92 oz/yd
2
302 g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 57/in 22.44/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 9.50 mil 0.24 mm
Breaking Strength Warp 550 lbf/in
Filling 450 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
670
Carbon Fabric
Product Data
STYLE 670 US System
Type of Yarns Warp Yarn: 12K Carbon, 33MSI
Fill Yarn: 12K Carbon, 33MSI
Fabric Weight, Dry 19.80 oz/yd
2
671 g/m
2
Weave Style 2/2 Twill
CONSTRUCTION
Nominal Construction Warp Count: 11/in
Fill Count: 11/in
Fabric Thickness 25.9 mil 0.66 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
6581
Fiber Glass Fabric
Product Data
STYLE 6581 US System SI Units
Type of Yarns Warp Yarn: SCG 150 1/2 SC9 34 x2
Fill Yarn: SCG 150 1/2 SC9 34 x2
Fabric Weight, Dry 8.75 oz/yd
2
297g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 56/in 22.05/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 10.40 mil 0.26 mm
Breaking Strength Warp 250 lbf/in
Filling 250 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
11/14/2022
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 6522
Finish A218
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp SCG 150 1/2
Fill SCG 150 1/2
Count: (Ends x Picks)/inch 24.0 x 22.0
Weight 5.6 oz/yd
2
Breaking Strength
Warp 50 lb./inch
Fill 40 lb./inch
Thickness 0.0060 inch
Values shown are based on typical finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
