by | Sep 27, 2025
TECHNICAL DATA SHEE T
D300
PEEL PLY
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS D300_0 2.21_Issue1
D300
Peel ply
Ideally suited to aerospace applications
Features and Benefits
Porous, medium weight nylon 6.6 peel ply.
Heat set and scoured, for use directly against
laminates or bond lines.
Available coated or non-coated depending on user
requirement.
Recommended for composite manufacture and
metal bonding applications.
Coloured pink or white with red pinstripe for ease of
detection and removal from the cured laminate.
Solvay does not recommend the use of woven nylon
fabrics with phenolic resin or prepreg systems as acid
in the catalyst can break down nylon materials.
Therefore, we recommend that customers conduct
their own internal capability tests.
PROPERTIES
Maximum use temperature 204 C 400 F
Color Pink
Fabric type Nylon
Fabric weight 94g/m 2.81oz/yd
AVAILABILITY
Standard width 1.52m 1.66yd
Standard length 100m 109yd
Slit widths available
STORAGE
No special storage conditions required.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 1 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
TECHNICAL DATA SHEET
PRODUCT INFORMATION
PRODUCT: Flexible Viny
PRODUCT ID: CFIT101132
EMBOSS: Orange Matte Vinyl
GAUGE: .006
COLOR: Orange
HAND: 44 PHR
COMPLIANCE
CALIFORNIA PROP. 65 REGULATIONS LISTED ON NOV. 23, 2018
REACH 197 SVHC LISTED ON JANUARY 15, 2019
ROHS – 2011/65/EU ANNEX II AND AMENDING DIRECTIVE (EU) 2015/863
PHTHALATE FREE FORMULATION DOES NOT CONTAIN DEHP, DBP, BBP, DINP, DIDP,
OR DNOP
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 2 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
PHYSICAL PROPERTIES
TEST
CHARACTERISTICS
UNIT of
MEASURE
TEST METHOD RESULTS
1. Gauge Tolerance % ASTIM D-1593 10%
2. Width Inch ASTM D-1593 72
3. Thickness (GA) After
Embossing
ASTM D-374C 6.0 GA
4. Specific Gravity 1.315 0.03
5. Tensile Strength kgf / cm
2
ASTM D-882
MD 200
CD 180
6. Elongation % ASTM D-882
MD 200
CD 200
7. Tear Strength kgf / cm
2
ASTM D-882
MD 50
CD 40
8. Shrinkage % %
ASTM D-1204
(100 C * 30 min * oven)
MD -5
CD 3
9. Cold Crack F / ASTM D-1790 32 / 0
10. DEHP DBP BBP DINP
DPENP DNHP DCHP
DIBP
CPSC-CH-C1001-09.3 PASS
11. DIDP DNOP CPSC-CH-C1001-09.3 PASS
12. Lead (Pb) 100
mg/kg
(a) CPSC-CH-E1002-08.1
(b) RoHS IEC62321-2008 (ICP-
AES)
PASS
13. Cadmium (Cd) RoHS IEC62321-2008 (ICP-AES) PASS
14. Mercury (Hg) RoHS IEC62321-2008 (ICP-AES) PASS
15. Hexavalent
Chromium (Cr+6)
RoHS IEC62321-2008 (ICP-AES) PASS
16. Antimony (Sb) RoHS IEC62321-2008 (ICP-AES) PASS
17. Arsenic (As) RoHS IEC62321-2008 (ICP-AES) PASS
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20190404 DATED: September 19, 2022
Page 3 of 3
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
18. Barium (Ba)
500mg/kg
ASTM F963-11 4.3.5.2(1) PASS
19. Selneium (Se)
500mg/kg
ASTM F963-11 4.3.5.2(1) PASS
20. Bisphenol A
500mg/kg
Substance not used
21. Storage Conditions Rel. Humidity 40% – 60%
22. Shelf Life Ideal Conditions 12 Months
NOTES:
None.
by | Sep 27, 2025
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20180901 DATED: September 20, 2022
Page 1 of 2
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
TECHNICAL DATA SHEET
PRODUCT INFORMATION
PRODUCT: Flexible Vinyl
PRODUCT ID: CFIT100150
EMBOSS: Orange Matte Vinyl
GAUGE: .006
COLOR: Orange
HAND: 44 PHR
WARNING
WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS INCLUDING DIISONONYL PHTHALATE
(DINP), WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, AND DI(2-ETHYLHEXYL) PHTHALATE
(DEHP), WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. FOR MORE INFORMATION GO TO WWW.P65WARNINGS.CA.GOV.
Production method and quality control have been done in accordance with ISO 9001 standards. This information is presented in good faith, but
no warranty is given. These typical property values are intended to serve as guides only, and not as specification limits. Its user must determine
the suitability for any intended use of the material. No statements are intended or should be construed as a recommendation to infringe any
patent. The above testing results are subject to change according to the application and grade without prior notice.
TDS20180901 DATED: September 20, 2022
Page 2 of 2
12658 Cisneros Lane Santa Fe Springs, CA 90670 562.298.1300 FAX 562.298.1310
Coated Fabrics
CrystalForm
PHYSICAL PROPERTIES
TEST
CHARACTERISTICS
UNIT of
MEASURE
TEST METHOD RESULTS
1. Gauge Tolerance % ASTIM D-1593 10%
2. Width Inch ASTM D-1593 115
3. Thickness (GA) After
Embossing
ASTM D-374C 10.82 GA
4. Specific Gravity 1.315 0.03
5. Tensile Strength kgf / cm
2
ASTM D-882
MD 210
CD 200
6. Elongation % ASTM D-882
MD 200
CD 220
7. Tear Strength kgf / cm
2
ASTM D-882
MD 60
CD 50
8. Shrinkage % %
ASTM D-1204
(100 C * 30 min * oven)
MD 60
CD 50
9. Cold Crack F / ASTM D-1790 32 / 0
10. Storage Conditions Rel. Humidity 40% – 60%
11. Shelf Life Ideal Conditions 12 Months
NOTES:
None.
