by | Sep 27, 2025
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
STRETCH- VAC
TM
3000
Vacuum bagging film, ideally suited to aerospace applications.
Features and Benefits
Multi-layer vacuum baggng film produced using our
state of the art co- extrusion technology.
Suitable for high temperature autoclave curing of
aerospace composites, including BMI resins.
Soft and supple with unprecedented tensile strength
for added security.
Unique formulation less sensitive to low humidity
conditions than standard nylon films. SV 3000 is a
mono-nylon film.
PROPERTIES
Maximum use temperature 204
C 400
F
Color Pink
Density 1.14 g/cm
3
0.65oz/in
3
DSC medium 217
C 422.6 F
Tensile Strength at break (ASTM D882) 96.53 MPa 14,000 psi
Elongation at break (ASTM D882) 475%
Yield for 50 m (0.002 ) 17.4m
2
/kg 9.44 yd
2
/lb
Yield for 75 m (0.003 ) 11.6m
2
/kg 6.29yd
2
/lb
AVAILABILITY
Thickness 50 and 75 m 0.002 and 0.003 inches
Roll weight Up to 45 kg Up to 100lbs.
Widths 4.06m (open) 160 inches (open)
Formats available Tube, sheet, V-sheet, gusseted and C-fold
STORAGE, HANDLING AND USE
Nylon based films are sensitive to humidity. A high humidity level will act as plasticizer, making the film more flexible and softer,
while a low humidity level will cause the film to become stiffer.
To preserve the integrity of the materials when stored in their original packaging, it is advisable not to stack more than two pallets.
Do not store rolls on their ends.
STORAGE (RECOMMENDED)
Store the film in a relative humidity (RH) from 25% to 60% and a temperature range of 15 to 40
C (59 to 104 F). Avoid stocking in
RH less than 25% and temperatures less than 10 C (50 F).
USAGE (RECOMMENDED)
If possible use the film in a RH ranging from 50% to 60% and a temperature range of 20 to 25 C (68 to 77 F).
If possible condition the film before handling for 48 hours in the recommended RH and temperature ranges.
TECHNICAL DATA SHEET
STRETCH- VAC
TM
3000
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV3000_0 2.21_Issue1
HEALTH & SAFETY
Please refer to the product SDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
STRETCH- VAC 250
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV250_0 2.21_Issue1
STRETCH- VAC 250
Vacuum bagging film
Ideally suited to debulking and hot compaction applications
Features and Benefits
Highly conformable co-polymer film.
Will remain soft and pliable in cures up to
135 C/275 F.
Engineered for use with all standard 121 C/250 F
curing epoxy resin systems.
Particularly suited to debulking and hot compaction
cycles where softness and elongation are essential.
Can be heat seamed to meet any custom shape
requirements.
Not suitable for use with polyester or vinylester resins.
PROPERTIES
Maximum use temperature 135 C 275 F
Color Light blue
Tensile strength at break (ASTM D882) 55MPa 8000psi
Elongation at break (ASTM D882) 800%
Yield 16m /kg 78.3 ft /lb
AVAILABILITY
Thickness 50 m 0.002in
Widths Up to 3m (open) Up to 118in (open)
Formats available V sheet, sheet
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
by | Sep 27, 2025
TECHNICAL DATA SHEE T
STRETCH- VAC 250
VACUUM BAGGING FILM
Aerovac
955-10 National Parkway
Schaumburg, IL 60 173
USA
TDS SV250_0 2.21_Issue1
STRETCH- VAC 250
Vacuum bagging film
Ideally suited to debulking and hot compaction applications
Features and Benefits
Highly conformable co-polymer film.
Will remain soft and pliable in cures up to
135 C/275 F.
Engineered for use with all standard 121 C/250 F
curing epoxy resin systems.
Particularly suited to debulking and hot compaction
cycles where softness and elongation are essential.
Can be heat seamed to meet any custom shape
requirements.
Not suitable for use with polyester or vinylester resins.
PROPERTIES
Maximum use temperature 135 C 275 F
Color Light blue
Tensile strength at break (ASTM D882) 55MPa 8000psi
Elongation at break (ASTM D882) 800%
Yield 16m /kg 78.3 ft /lb
AVAILABILITY
Thickness 50 m 0.002in
Widths Up to 3m (open) Up to 118in (open)
Formats available V sheet, sheet
STORAGE
Do not store rolls vertically on their ends.
HEALTH & SAFETY
Please refer to the product MSDS for safe handling, personal protective equipment recommendations and disposal
considerations.
DISCLAIMER: The data and information provided in this document have been obtained from carefully controlled samples and are considered to be
representative of the product described. Aerovac does not express or imply any guarantee or warranty of any kind including, but not limited to, the accuracy, the
completeness or the relevance of the data and information set out herein. Because the properties of this product can be significantly affected by the fabrication
and testing techniques employed, and since Aerovac does not control the conditions under which its products are tested and used, Aerovac cannot guarantee
the properties provided will be obtained with other processes and equipment. No guarantee or warranty is provided if the product is adapted for a s pecific use or
purpose. Aerovac declines any liability with respect to the use made by any third party of the data and information contained herein. Aerovac has the right to
change any data or information when deemed appropriate. All trademarks are the property of their respective owners. 2021 , Aerovac. All rights reserved.
