by | Sep 27, 2025
Page 1 / 8
SAFETY DATA SHEET
Regulation (EC) No 1907/2006 (REACH), Annex II
(COMMISSION REGULATION (EU) No 453/2010)
Version 1 Issue Date 24-Mar-2014
Product Name Assembled Roving, Direct Roving, Dry Chopped Strands, Wet
Chopped Strands, Woven Roving, Powder Chopped Strand Mat, Emulsion Chopped
Strand Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass Filament Yarn
Revision date 24-Mar-2014
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product Name Assembled Roving, Direct Roving, Dry Chopped Strands, Wet Chopped Strands,
Woven Roving, Powder Chopped Strand Mat, Emulsion Chopped Strand Mat,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass Filament Yarn
1.2. Relevant identified uses of the substance or mixture and uses advised against
Recommended Use For winding glass pipe, tank; suppress auto parts, bathtubs; for hand lay up
fiberglass molding process; reinforced plastics, etc.
Uses advised against No information available
1.3. Details of the supplier of the safety data sheet
Supplier Taishan Fiberglass INC.
Address Economic Development Zone,Taian Shandong,P.R.China
Postal Code 271000
Phone +86 -538-6622028
FAX +86 -538-6622009
E-mail ctgf@ctgf.com
1.4. Emergency telephone number
+86-538-6622028
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Not classified.
Classification according to Directive 67/548/EEC or 1999/45/EC
Not classified.
2.2. Label elements
Symbols/Pictograms Not applicable.
Signal word Not applicable.
Hazard Statements Not applicable.
Precautionary Statements Not applicable.
2.3. Other hazards
No information available.
SECTION 3: Composition/information on ingredients
Page 2 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
3.1 Ingredients of Products:
Product Name Glass, % Size, Binder, Water,
Assembled Roving 97.70-99.85 0.15 ~2.10 / 0~0.20
Direct Roving 99.00-99.85 0.15 ~0.80 / 0~0.20
Dry Chopped Strands 97.95~99.35 0.65 ~1.95 / 0~0.10
Wet Chopped Strands 86.85-94.00 0 ~ 1.15 / 6.00~12.00
Woven Roving 99.00-99.60 0.40 ~ 0.80 / 0~0.20
Powder Chopped Strand Mat 92.20-97.40 0.30~ 0.60 2.30-7.00 0~0.20
Emulsion Chopped Strand Mat 91.20-96.70 0.30~ 0.60 3.00-8.00 0~0.20
Glass fiber stitched fabrics 96.80~99.60 0.40 ~3.00 / 0~0.20
Glass fiber wet-laid mat 89.50~96.00 4.00~10.00 / 0 ~0.50
Glass Filament Yarn 98.60~99.20 0.70~1.80 / 0~0.20
Fiber glass: 659997-17-3
Size: Not available.
Size:
Size is a mixture of chemicals applied to the glass strands. Most of this mixture is made up of basically
non-reactive high molecular weight polymers, often natural ingredients(starches) with no reactive sites, which
are not listed as substances in the EINECS nor in the ELINCS appendices.
Sometimes size maybe also contain substances of organo-silane family or other substances. The manufacturer
considers this risk as negligible as, even though listed as dangerous products, the concentration is extremely
low(under 0.1% of total weight) and they are polymerised during the production of glass fibers production.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical
advice/attention if you feel unwell.
Skin Contact
If irritation occurs to the skin, rinse with soap and water. Make sure to refrain from rinsing with warm water since
warm water will make the skin pores open to allow fiberglass to penetrate more deeply. If fiberglass penetrates
the skin, use a wash cloth to help pull out the fiberglass. To avoid further irritation, do not rub or scratch affected
skin. If irritation persists, get medical help. Make sure to refrain from using compressed air to remove fiberglass
from the skin.
Eye contact
Immediately flush eyes with clean water for at least 15 minutes. If irritation persists, get medical help.
Ingestion
Normally, ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure
that gastrointestinal disturbance does not occur. Do not let the person vomit unless required by medical
personnel. If disturbance persists, get medical help.
4.2. Most important symptoms and effects, both acute and delayed
Ingestion: Ingestion of the material is unlikely. However, ingestion of the material may cause gastrointestinal
disturbance.
Page 3 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
Inhalation: Breathing fiberglass dusts and particulates may cause irritation of the nose, throat and respiratory
tract.
Skin contact: Fiberglass dusts and particulates may cause temporary irritation.
Eye contact: Fiberglass dusts and particulates may cause temporary irritation to the eyes.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media Non-flammable. But the packing material may burning.
Use dry chemical, foam, carbon dioxide and water as
extinguishing media.
Unsuitable extinguishing media No information available
5.2. Special hazards arising from the substance or mixture
Primary combustion products are carbon monoxide, hydrogen, carbon dioxide and water. Other undetermined
compounds can be released in small quantities.
5.3. Advice for firefighters
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Avoid dust generation.
Avoid breath dust.
6.2. Environmental precautions
Prevent entry into waterways, sewers, basements or confined areas.
6.3. Methods and material for containment and cleaning up
Scooped up and put into a container for disposal.
6.4. Reference to other sections
See Section 7 for more information
See section 8 for more information
See section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Try to prevent the packing material from be damaged and keep the product inside the packing material to
minimize the generation of dusts. Maintain a clean work environment and avoid generation of fiberglass
Page 4 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
fragments from improper handling.
7.2. Conditions for safe storage, including any incompatibilities
Keep product in its packaging until use to minimize potential dust generation.
7.3. Specific end use(s)
Apart from the uses mentioned in SECTION 1.2 no other specific uses are stipulated.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Component: Fiber glass CAS#659997-17-3
Permissible Exposure Limit
of OSHA
(8-hr Average Weight)
Permissible Exposure Limit of
ACGIH
(8 hr Average Weight)
Total Dust 15 mg/m3 10 mg/m3
Respirable
particulates
5 mg/m3
3 mg/m3
Respirable Fibre / 1 fibre/ml
Derived No Effect Level (DNEL)
No information available.
Predicted No Effect Concentration (PNEC)
No information available.
8.2. Exposure controls
Engineering Controls
Production areas are closed off and a required relative humidity is maintained.
Personal protective equipment
Eye/face protection Wear safety glasses and face shield.
Hand Protection Wear gloves. Skin irritation occurs primarily at the contact areas such as wrists
and between the fingers.
Skin and body protection Normal loose working clothing (long-sleeved shirts and long pants) is
recommended. Skin irritation occurs primarily at the contact areas such as around
the neck and waist.
Respiratory protection Wear a suitable mask when working in an environment where dust concentration
is high.
Environmental exposure controls
Do not allow into any sewer, on the ground or into any body of water
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance Solid
Color white or off-white
Odor Odorless
Page 5 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
Odor Threshold No information available
pH Not applicable.
Melting point/freezing point > 800 C
Boiling point / boiling rangeNot applicable.
Flash point Not applicable.
Evaporation rate Not applicable.
Flammability (solid, gas) Non flammable.
Upper flammability limit: Not applicable.
Lower flammability limit: Not applicable.
Vapor Pressure Not applicable.
Vapor density No information available
Density No information available
Relative density 2.6 Times that of water.
Bulk density No information available
Specific gravity No information available
Water solubility Insoluble
Partition coefficient Not applicable.
Autoignition temperature Not applicable.
Decomposition
temperature
No information available
Kinematic viscosity Not applicable.
Explosive properties Not an explosive
Oxidizing properties Not applicable
9.2. Other information
No information available
SECTION 10: Stability and reactivity
10.1. Reactivity
Stable under normal conditions.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
None under normal processing.
10.4. Conditions to avoid
None.
10.5. Incompatible materials
No information available.
10.6. Hazardous decomposition products
None under normal use conditions.
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity
No information available.
Skin corrosion/irritation
Fiberglass dusts may cause irritation to skin.
Serious eye damage/eye irritation
Fiberglass dusts may cause irritation to eye.
Sensitization
No sensitization responses were observed.
Germ cell mutagenicity
No information available.
Carcinogenicity
Fiberglass is a non-carcinogenic material.
Reproductive toxicity
No information available.
STOT – single exposure
No information available.
STOT – repeated exposure
No information available.
Aspiration hazard
No information available.
SECTION 12: Ecological information
12.1. Toxicity
No information available.
12.2. Persistence and degradability
No information available.
12.3. Bioaccumulative potential
No information available.
12.4. Mobility in soil
Page 6 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
No information available.
12.5. Results of PBT and vPvB assessment
PBT/vPvB assessment information is not available as chemical safety assessment not conducted.
12.6. Other adverse effects
No information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste from residues/unused Disposal should be in accordance with applicable regional, national and local laws
products and regulations.
Contaminated packaging Empty containers should be taken for local recycling, recovery or waste disposal.
SECTION 14: Transport information
14.1 UN Number Not regulated
14.2 Proper shipping name Not regulated
14.3 Hazard Class Not regulated
14.4 Packing Group Not regulated
14.5 Environmental hazards Not applicable
14.6 Special precautions Rolling and moisture should be avoided in transit.
14.7 Transport in bulk
according to Annex II of
MARPOL 73/78 and the IBC
Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
European Union
Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to
chemical agents at work
Take note of Directive 94/33/EC on the protection of young people at work
Take note of Directive 92/85/EC on the protection of pregnant and breastfeeding women at work
International Inventories
Component TSCA DSL/NDSL EINECS/ELINCS ENCS IECSC KECL PICCS AICS
CAS NO.: Listed Listed Listed Listed Listed Listed Listed Listed
Page 7 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
65997-17-3
15.2. Chemical safety assessment
No information available
SECTION 16: Other information
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006
Issue Date 24-Mar-2014
Revision date Not applicable
Revision Note Not applicable
Key or legend to abbreviations and acronyms used in the safety data sheet
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China Inventory of Existing Chemical Substances
KECL – Korean Existing and Evaluated Chemical Substances
PICCS – Philippines Inventory of Chemicals and Chemical Substances
AICS – Australian Inventory of Chemical Substances
Full text of H-Statements referred to under section 3
Not applicable.
Full text of R-phrases referred to under sections 2 and 3
Not applicable.
Disclaimer
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as a guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality
specification. The information relates only to the specific material designated and may not be valid for such
material used in combination with any other materials or in any process, unless specified in the text.
——– End of Safety Data Sheet ——–
Page 8 / 8
by | Sep 27, 2025
Page 1 / 8
SAFETY DATA SHEET
Regulation (EC) No 1907/2006 (REACH), Annex II
(COMMISSION REGULATION (EU) No 453/2010)
Version 1 Issue Date 24-Mar-2014
Product Name Assembled Roving, Direct Roving, Dry Chopped Strands, Wet
Chopped Strands, Woven Roving, Powder Chopped Strand Mat, Emulsion Chopped
Strand Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass Filament Yarn
Revision date 24-Mar-2014
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product Name Assembled Roving, Direct Roving, Dry Chopped Strands, Wet Chopped Strands,
Woven Roving, Powder Chopped Strand Mat, Emulsion Chopped Strand Mat,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass Filament Yarn
1.2. Relevant identified uses of the substance or mixture and uses advised against
Recommended Use For winding glass pipe, tank; suppress auto parts, bathtubs; for hand lay up
fiberglass molding process; reinforced plastics, etc.
Uses advised against No information available
1.3. Details of the supplier of the safety data sheet
Supplier Taishan Fiberglass INC.
Address Economic Development Zone,Taian Shandong,P.R.China
Postal Code 271000
Phone +86 -538-6622028
FAX +86 -538-6622009
E-mail ctgf@ctgf.com
1.4. Emergency telephone number
+86-538-6622028
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Not classified.
Classification according to Directive 67/548/EEC or 1999/45/EC
Not classified.
2.2. Label elements
Symbols/Pictograms Not applicable.
Signal word Not applicable.
Hazard Statements Not applicable.
Precautionary Statements Not applicable.
2.3. Other hazards
No information available.
SECTION 3: Composition/information on ingredients
Page 2 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
3.1 Ingredients of Products:
Product Name Glass, % Size, Binder, Water,
Assembled Roving 97.70-99.85 0.15 ~2.10 / 0~0.20
Direct Roving 99.00-99.85 0.15 ~0.80 / 0~0.20
Dry Chopped Strands 97.95~99.35 0.65 ~1.95 / 0~0.10
Wet Chopped Strands 86.85-94.00 0 ~ 1.15 / 6.00~12.00
Woven Roving 99.00-99.60 0.40 ~ 0.80 / 0~0.20
Powder Chopped Strand Mat 92.20-97.40 0.30~ 0.60 2.30-7.00 0~0.20
Emulsion Chopped Strand Mat 91.20-96.70 0.30~ 0.60 3.00-8.00 0~0.20
Glass fiber stitched fabrics 96.80~99.60 0.40 ~3.00 / 0~0.20
Glass fiber wet-laid mat 89.50~96.00 4.00~10.00 / 0 ~0.50
Glass Filament Yarn 98.60~99.20 0.70~1.80 / 0~0.20
Fiber glass: 659997-17-3
Size: Not available.
Size:
Size is a mixture of chemicals applied to the glass strands. Most of this mixture is made up of basically
non-reactive high molecular weight polymers, often natural ingredients(starches) with no reactive sites, which
are not listed as substances in the EINECS nor in the ELINCS appendices.
Sometimes size maybe also contain substances of organo-silane family or other substances. The manufacturer
considers this risk as negligible as, even though listed as dangerous products, the concentration is extremely
low(under 0.1% of total weight) and they are polymerised during the production of glass fibers production.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical
advice/attention if you feel unwell.
Skin Contact
If irritation occurs to the skin, rinse with soap and water. Make sure to refrain from rinsing with warm water since
warm water will make the skin pores open to allow fiberglass to penetrate more deeply. If fiberglass penetrates
the skin, use a wash cloth to help pull out the fiberglass. To avoid further irritation, do not rub or scratch affected
skin. If irritation persists, get medical help. Make sure to refrain from using compressed air to remove fiberglass
from the skin.
Eye contact
Immediately flush eyes with clean water for at least 15 minutes. If irritation persists, get medical help.
Ingestion
Normally, ingestion of this material is unlikely. If it does occur, watch the person for several days to make sure
that gastrointestinal disturbance does not occur. Do not let the person vomit unless required by medical
personnel. If disturbance persists, get medical help.
4.2. Most important symptoms and effects, both acute and delayed
Ingestion: Ingestion of the material is unlikely. However, ingestion of the material may cause gastrointestinal
disturbance.
Page 3 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
Inhalation: Breathing fiberglass dusts and particulates may cause irritation of the nose, throat and respiratory
tract.
Skin contact: Fiberglass dusts and particulates may cause temporary irritation.
Eye contact: Fiberglass dusts and particulates may cause temporary irritation to the eyes.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media Non-flammable. But the packing material may burning.
Use dry chemical, foam, carbon dioxide and water as
extinguishing media.
Unsuitable extinguishing media No information available
5.2. Special hazards arising from the substance or mixture
Primary combustion products are carbon monoxide, hydrogen, carbon dioxide and water. Other undetermined
compounds can be released in small quantities.
5.3. Advice for firefighters
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Avoid dust generation.
Avoid breath dust.
6.2. Environmental precautions
Prevent entry into waterways, sewers, basements or confined areas.
6.3. Methods and material for containment and cleaning up
Scooped up and put into a container for disposal.
6.4. Reference to other sections
See Section 7 for more information
See section 8 for more information
See section 13 for more information
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Try to prevent the packing material from be damaged and keep the product inside the packing material to
minimize the generation of dusts. Maintain a clean work environment and avoid generation of fiberglass
Page 4 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
fragments from improper handling.
7.2. Conditions for safe storage, including any incompatibilities
Keep product in its packaging until use to minimize potential dust generation.
7.3. Specific end use(s)
Apart from the uses mentioned in SECTION 1.2 no other specific uses are stipulated.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Component: Fiber glass CAS#659997-17-3
Permissible Exposure Limit
of OSHA
(8-hr Average Weight)
Permissible Exposure Limit of
ACGIH
(8 hr Average Weight)
Total Dust 15 mg/m3 10 mg/m3
Respirable
particulates
5 mg/m3
3 mg/m3
Respirable Fibre / 1 fibre/ml
Derived No Effect Level (DNEL)
No information available.
Predicted No Effect Concentration (PNEC)
No information available.
8.2. Exposure controls
Engineering Controls
Production areas are closed off and a required relative humidity is maintained.
Personal protective equipment
Eye/face protection Wear safety glasses and face shield.
Hand Protection Wear gloves. Skin irritation occurs primarily at the contact areas such as wrists
and between the fingers.
Skin and body protection Normal loose working clothing (long-sleeved shirts and long pants) is
recommended. Skin irritation occurs primarily at the contact areas such as around
the neck and waist.
Respiratory protection Wear a suitable mask when working in an environment where dust concentration
is high.
Environmental exposure controls
Do not allow into any sewer, on the ground or into any body of water
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Appearance Solid
Color white or off-white
Odor Odorless
Page 5 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Power Chopped Strand Mat, Emulsion Chopped Strand Ma,
Glass fiber stitched fabrics, Glass fiber wet-laid mat, Glass
Filament Yarn
Revision date 24-Mar-2014
Odor Threshold No information available
pH Not applicable.
Melting point/freezing point > 800 C
Boiling point / boiling rangeNot applicable.
Flash point Not applicable.
Evaporation rate Not applicable.
Flammability (solid, gas) Non flammable.
Upper flammability limit: Not applicable.
Lower flammability limit: Not applicable.
Vapor Pressure Not applicable.
Vapor density No information available
Density No information available
Relative density 2.6 Times that of water.
Bulk density No information available
Specific gravity No information available
Water solubility Insoluble
Partition coefficient Not applicable.
Autoignition temperature Not applicable.
Decomposition
temperature
No information available
Kinematic viscosity Not applicable.
Explosive properties Not an explosive
Oxidizing properties Not applicable
9.2. Other information
No information available
SECTION 10: Stability and reactivity
10.1. Reactivity
Stable under normal conditions.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
None under normal processing.
10.4. Conditions to avoid
None.
10.5. Incompatible materials
No information available.
10.6. Hazardous decomposition products
None under normal use conditions.
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity
No information available.
Skin corrosion/irritation
Fiberglass dusts may cause irritation to skin.
Serious eye damage/eye irritation
Fiberglass dusts may cause irritation to eye.
Sensitization
No sensitization responses were observed.
Germ cell mutagenicity
No information available.
Carcinogenicity
Fiberglass is a non-carcinogenic material.
Reproductive toxicity
No information available.
STOT – single exposure
No information available.
STOT – repeated exposure
No information available.
Aspiration hazard
No information available.
SECTION 12: Ecological information
12.1. Toxicity
No information available.
12.2. Persistence and degradability
No information available.
12.3. Bioaccumulative potential
No information available.
12.4. Mobility in soil
Page 6 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
No information available.
12.5. Results of PBT and vPvB assessment
PBT/vPvB assessment information is not available as chemical safety assessment not conducted.
12.6. Other adverse effects
No information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste from residues/unused Disposal should be in accordance with applicable regional, national and local laws
products and regulations.
Contaminated packaging Empty containers should be taken for local recycling, recovery or waste disposal.
SECTION 14: Transport information
14.1 UN Number Not regulated
14.2 Proper shipping name Not regulated
14.3 Hazard Class Not regulated
14.4 Packing Group Not regulated
14.5 Environmental hazards Not applicable
14.6 Special precautions Rolling and moisture should be avoided in transit.
14.7 Transport in bulk
according to Annex II of
MARPOL 73/78 and the IBC
Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
European Union
Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to
chemical agents at work
Take note of Directive 94/33/EC on the protection of young people at work
Take note of Directive 92/85/EC on the protection of pregnant and breastfeeding women at work
International Inventories
Component TSCA DSL/NDSL EINECS/ELINCS ENCS IECSC KECL PICCS AICS
CAS NO.: Listed Listed Listed Listed Listed Listed Listed Listed
Page 7 / 8
Product Name Assembled Roving, Direct Roving, Dry
Chopped Strands, Wet Chopped Strands, Woven Roving,
Powder Chopped Strand Mat, Emulsion Chopped Strand
Mat, Glass fiber stitched fabrics, Glass fiber wet-laid mat,
Glass Filament Yarn
Revision date 24-Mar-2014
65997-17-3
15.2. Chemical safety assessment
No information available
SECTION 16: Other information
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006
Issue Date 24-Mar-2014
Revision date Not applicable
Revision Note Not applicable
Key or legend to abbreviations and acronyms used in the safety data sheet
TSCA – United States Toxic Substances Control Act Section 8(b) Inventory
DSL/NDSL – Canadian Domestic Substances List/Non-Domestic Substances List
EINECS/ELINCS – European Inventory of Existing Chemical Substances/European List of Notified Chemical Substances
ENCS – Japan Existing and New Chemical Substances
IECSC – China Inventory of Existing Chemical Substances
KECL – Korean Existing and Evaluated Chemical Substances
PICCS – Philippines Inventory of Chemicals and Chemical Substances
AICS – Australian Inventory of Chemical Substances
Full text of H-Statements referred to under section 3
Not applicable.
Full text of R-phrases referred to under sections 2 and 3
Not applicable.
Disclaimer
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as a guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality
specification. The information relates only to the specific material designated and may not be valid for such
material used in combination with any other materials or in any process, unless specified in the text.
——– End of Safety Data Sheet ——–
Page 8 / 8
by | Sep 27, 2025
* O D V V ) D E U L F
Not available.
Solid.
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
Relevant identified uses of the substance or mixture and uses advised against
SAFETY DATA SHEET
* O D V V ) D E U L F
Product use :Glass fibres
Area of application :Professional applications.
vS0nPd0fnnndPS0o9F2tEmergency telephone
number (with hours of
operation)
Supplier/Manufacturer
e-mail address of person
responsible for this SDS
:
Product code :
Section 2. Hazards identification
Classification of the
substance or mixture
:
Signal word :No signal word.
Hazard statements :No known significant effects or critical hazards.
Precautionary statements
Prevention :Not applicable.
Response :Not applicable.
Storage :Not applicable.
Disposal :Not applicable.
GHS label elements
OSHA/HCS status :While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the
safe handling and proper use of the product. This SDS should be retained and available
for employees and other users of this product.
Hazards not otherwise
classified
:None known.
Not classified.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 1/11
United States
Not available.
L Q I R # F K H P L F D O F K H F N G H N V F K Q X U E X V F K # F K H P L F D O F K H F N G H
9Fw2Rw4 ,9Fi uuW
Sdd.. 0 W + R O O + X Q W H U V Y L O O H 2 b
6 X L W H F
+ X Q W H U V Y L O O H OW dn.Pn (,9F )
Tel +S P.s srs fppn
Fax +S P.s srs fpdd
0 D L O L Q I R # V D H U W H [ F R P
Website: www. V D H U W H [.com
:
:
:
* O D V V ) D E U L F
Section 3. Composition/information on ingredients
titanium dioxide – 1 13463-67-7
Ingredient name CAS number%
Other means of
identification
:Not available.
Substance/mixture :Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Other names
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified and hence require reporting in this section.
Wash out mouth with water. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless
directed to do so by medical personnel. Get medical attention if symptoms occur.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:
Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training.
Notes to physician :Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Description of necessary first aid measures
Specific treatments :No specific treatment.
Most important symptoms/effects, acute and delayed
Inhalation :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Ingestion
Skin contact :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.
No specific data.
No specific data.
:
:
:
Eye contact :No specific data.
Potential acute health effects
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 2/11
United States
* O D V V ) D E U L F
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
metal oxide/oxides
No specific fire or explosion hazard.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective
equipment for fire-fighters
In case of fire, use water spray (fog), foam, dry chemical or CO .
Extinguishing media
:
:
:
None known.
Suitable extinguishing
media
:
Unsuitable extinguishing
media
:
Special protective actions
for fire-fighters
:
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Move containers from spill area. Prevent entry into sewers, water courses, basements
or confined areas. Vacuum or sweep up material and place in a designated, labeled
waste container. Dispose of via a licensed waste disposal contractor. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.
:
:No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Large spill :
Move containers from spill area. Vacuum or sweep up material and place in a
designated, labeled waste container. Dispose of via a licensed waste disposal
contractor.Small spill :
Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders:If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in “For non-
emergency personnel”.
Section 7. Handling and storage
Protective measures Put on appropriate personal protective equipment (see Section 8).:
Precautions for safe handling
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 3/11
United States
* O D V V ) D E U L F
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Store between the following temperatures: 20 to 25 C (68 to 77 F). Store in accordance
with local regulations. Store in original container protected from direct sunlight in a dry,
cool and well-ventilated area, away from incompatible materials (see Section 10) and
food and drink. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage.
Do not store in unlabeled containers. Use appropriate containment to avoid
environmental contamination. See Section 10 for incompatible materials before
handling or use.
:
:
titanium dioxide OSHA PEL (United States, 5/2018).
TWA: 15 mg/m 8 hours. Form: Total dust
ACGIH TLV (United States, 1/2022).
TWA: 2.5 mg/m 8 hours. Form: respirable fraction,
finescale particles
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. 4 – 8 hours (breakthrough time): Protective/insulated gloves. If applicable
Rubber gloves. Butyl gloves. Neoprene gloves./ polychloroprene gloves. Nitrile gloves.
(>=0.5 mm)
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: safety glasses with side-
shields.
Eye/face protection
:
:
Environmental exposure
controls
:Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures :
Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
Recommended: Protective hand cream
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 4/11
United States
* O D V V ) D E U L F
Section 8. Exposure controls/personal protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Respiratory protection :
Body protection Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.:
Other skin protection :Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point/freezing point
Relative density
Solid.
Not available.
Not available.
Characteristic.Odor
pH
According to specificationColor
Evaporation rate Not available.
Not available.
Not available.Odor threshold
:
:
:
:
:
:
:
:
Appearance
SADT Not available.:
Decomposition temperature:Not available.
Viscosity Not applicable.:
Flow time (ISO 2431) :Not available.
Density Not available.:
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
Flash point Not applicable.:
Boiling point, initial boiling
point, and boiling range
:Not available.
Vapor pressure
Relative vapor density Not applicable.
Not applicable.:
:
Flammability :Not available.
Lower and upper explosion
limit/flammability limit
:Not applicable.
Auto-ignition temperature Not applicable.
Not applicable.Partition coefficient: n-
octanol/water
:
:
Miscible with water :No.
Particle characteristics
Median particle size :Not available.
Other information
Solubility(ies) :Media Result
hot water Not soluble
cold water Not soluble
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 5/11
United States
* O D V V ) D E U L F
Section 9. Physical and chemical properties
Physical/chemical
properties comments
:No additional information.
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid No specific data.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.Chemical stability :
:
:
Incompatible materials :
Possibility of hazardous
reactions
:Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity :No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous polymerization will not occur.
No specific data.
Section 11. Toxicological information
Acute toxicity
titanium dioxide LC50 Inhalation Dusts and mistsRat – Male,
Female
5.09 mg/l 4 hours
Product/ingredient name Result Species Dose Exposure
Carcinogenicity
Conclusion/Summary :Not available.
Mutagenicity
Conclusion/Summary :Not available.
Teratogenicity
Conclusion/Summary :Not available.
Reproductive toxicity
Conclusion/Summary :Not available.
Irritation/Corrosion
titanium dioxide Skin – Mild irritant Human – 72 hours 300
ug I
–
Product/ingredient name Result Score Exposure Observation
Sensitization
Not available.
Species
Information on toxicological effects
Classification
titanium dioxide – 2B –
Product/ingredient name NTPIARCOSHA
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 6/11
United States
* O D V V ) D E U L F
Section 11. Toxicological information
Information on the likely
routes of exposure
Inhalation :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Ingestion
Skin contact :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
No known significant effects or critical hazards.General :
No known significant effects or critical hazards.Carcinogenicity :
No known significant effects or critical hazards.Mutagenicity :
No known significant effects or critical hazards.Reproductive toxicity :
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Inhalation No specific data.
No specific data.
No specific data.
:
:
:
Eye contact :No specific data.
Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.
Not available.
Numerical measures of toxicity
Aspiration hazard
Not available.
:Routes of entry anticipated: Oral, Dermal, Inhalation, Eyes.
Potential acute health effects
Potential immediate
effects
:Not available.
Short term exposure
Potential delayed effects:Not available.
Potential immediate
effects
:Not available.
Long term exposure
Potential delayed effects:Not available.
Acute toxicity estimates
Product/ingredient name
titanium dioxide N/A N/A N/A N/A 5.09
Oral (mg/
kg)
Dermal
(mg/kg)
Inhalation
(gases)
(ppm) Inhalation
(vapors)
(mg/l) Inhalation
(dusts and
mists) (mg/
l)
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 7/11
United States
* O D V V ) D E U L F
Section 11. Toxicological information
Section 12. Ecological information
Bioaccumulative potential
Other adverse effects :No known significant effects or critical hazards.
Not available.
Toxicity
titanium dioxide Acute LC50 3 mg/l Fresh water Crustaceans – Ceriodaphnia
dubia – Neonate
48 hours
Acute LC50 6.5 mg/l Fresh water Daphnia – Daphnia pulex –
Neonate
48 hours
Acute LC50 >1000000 g/l Marine waterFish – Fundulus heteroclitus96 hours
Product/ingredient name SpeciesResult Exposure
Conclusion/Summary :Not available.
Persistence and degradability
Soil/water partition
coefficient (KOC)
:Not available.
Mobility in soil
Not available.
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.
:Disposal methods
Section 14. Transport information
–
–
–
–
–
Not regulated.
–
Not regulated. Not regulated.
DOT Classification IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 8/11
United States
* O D V V ) D E U L F
Section 14. Transport information
– – -Packing group
Environmental
hazards
Special precautions for user
No. No. No.
Transport within user s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
:
Additional information
Transport in bulk according
to IMO instruments
:Not available.
Section 15. Regulatory information
U.S. Federal regulations
The following components are listed: FIBROUS GLASSMassachusetts
:
:
SARA 313
California Prop. 65
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs) :Listed
Clean Air Act Section 602
Class I Substances
:Not listed
Clean Air Act Section 602
Class II Substances
:Not listed
DEA List I Chemicals
(Precursor Chemicals)
:Not listed
DEA List II Chemicals
(Essential Chemicals)
:Not listed
New York :None of the components are listed.
New Jersey :None of the components are listed.
Pennsylvania :None of the components are listed.
State regulations
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): Not determined.
SARA 302/304
SARA 304 RQ :Not applicable.
No products were found.
Composition/information on ingredients
Not applicable.
SARA 311/312
Classification :Not applicable.
titanium dioxide 1 CARCINOGENICITY – Category 2
Name % Classification
Composition/information on ingredients
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 9/11
United States
* O D V V ) D E U L F
Section 15. Regulatory information
International regulations
WARNING: This product can expose you to Titanium dioxide, which is known to the State of California to cause
cancer. For more information go to www.P65Warnings.ca.gov.
Titanium dioxide – –
Ingredient name No significant risk levelMaximum acceptable dosage
level
Chemical Weapon Convention List Schedules I, II & III Chemicals
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Not listed.
Section 16. Other information
History
Date of issue/Date of
revision
Date of previous issue
:
:
11/29/2022
No previous validation
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS
ratings are to be used with a fully implemented HMIS program. HMIS is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS
Personal Protective Equipment (PPE) codes, consult the HMIS Implementation Manual.
/0
0
0
Special hazards
Procedure used to derive the classification
Classification Justification
Not classified.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 10/11
United States
* O D V V ) D E U L F
Section 16. Other information
Chemical Check GmbH
Version
Prepared by
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Notice to reader
:
:
References :HCS (U.S.A.)- Hazard Communication Standard
International transport regulations
Key to abbreviations :
1
ATE = Acute Toxicity Estimate
AMP = Acceptable maximum peak above the acceptable ceiling concentration for an
8-hr shift
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. (“Marpol” = marine pollution)
N/A = Not available
UN = United Nations
Indicates information that has changed from previously issued version.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 11/11
United States
by | Sep 27, 2025
Saint-Gobain Adfors America, Inc SDS Page 1 of 4
CERT
Safety Data Sheet
Section 1. Chemical Product and Company Identification
Product Name: XPC138 Product Code: XPC138
Manufacturer s Name: 24 Hour Emergency Telephone Nu mber:
St. Gobain Adfors America, Inc Chemtrec: 1-800-424-9300
14770 East Ave. Contact number during business hours
Albion, New York Albion Plant: 1-(585)-589-4401
14411, U.S.A.
Date Prepared: November 18, 2014 Date of Expiry: November 18, 2017
Section 2. Composition / Information on Ingredients
This product is composed of continuous filament fiber
Dust may be generated by mechanical processing or abrading of the product.
Component
Wt.
%
LD50
LC50
ACGIH TLV* OSHA PEL
NIOSH
REL
Carbone fiber
CAS # 26125-61-1
77.4 10 mg/m
3
(Inhalable)
3 mg/m
3
(Respirable)
15 mg/m
3
(Total)
5 mg/m
3
(Respirable)
Apra-armide fiber
CAS # 7440-44-0
12.5
Polyester Textile
Continuous
filament
CAS # 25038-59-9
4.0
10mg/m
total dust
3mg/m
respirable
Fiber: 1 fiber/cm
15 mg/m
total dust
5mg/m
respirable
HSPP Voluntary: 1
fiber/cm
See section 16 for
definition of respirable
fibers
5 mg/m
total dust
respirabl
e fibers:
1
fiber/cm
Binder coating is a
proprietary blend
of acrylic and
ethylene based
polymers
6.1
* ACGIH Table of Adopted Values, particulates not otherwise specified, 2003
EMERGENCY OVERVIEW
Section 3. Hazards Identification
Carbon fibers or dust are electrically conductive and may create electrical short-circuits which
could result in damage to and malfunction of electrical equipment and/or personal injury.
EYES: May cause eye irritation when dust is generated or through direct contact.
INHALATION: Mechanical irritation of respiratory tract may occur if dust is inhaled.
SKIN: Prolonged contact may cause mild irritation and itching.
INGESTION:
Ingestion may cause temporary irritation of the digestive tract. If symptoms
develop consult a physician.
Saint-Gobain Adfors America, Inc SDS Page 2 of 4
Section 4. First Aid Measures
INHALATION:
Fibers may cause mechanical irritation to the mouth, nose and throat.
Remove person to fresh air.
EYE CONTACT:
Flush with warm running water for 15 min. Do not rub. If irritation persists,
consult a physician.
SKIN CONTACT:
Wash with mild soap and running water. Use a washcloth to help remove
fibers. If irritation persists, consult a physician.
INGESTION: Unlikely entry route. If symptoms develop consult a physician.
NOTE TO PHYSICIAN: No special instructions
Section 5. Firefighting Information
FLASH POINT: Not applicable METHOD USED: Not applicable
FLAMMABLE LIMITS: Not applicable
LOWER FLAMMABLE: Not applicable UPPER FLAMMABLE: Not applicable
EXTINGUISHING MEDIA: Water, water spray, foam, carbon dioxide, dry chemical
FIRE & EXPLOSION
HAZARDS:
Not applicable
FIRE FIGHTING
INSTRUCTIONS: Thermal decomposition of fabric coating may cause irritating smoke and
fumes.
FIRE FIGHTING EQUIPMENT:
Fire fighters should wear appropriate protective equipment including NIOSH
approved respirators.
Section 6. Accidental Release Measures
SPILL OR LEAK:
Spills should be cleaned up with a vacuum or by a wet sweeping technique.
Do not use compressed air. HEPA filter recommended.
Section 7. Handling and Storage
Store in a cool, dry place. Avoid direct sun. Store below 130F If heated over
212F requires local exhaust. Use P.P.E. appropriate for your situation.
Section 8. Exposure Controls / Personal Protective Equipment
VENTILATION:
Mechanical ventilation recommended for process machinery where dust
generation is expected.
RESPIRATORY
PROTECTION: Where dust levels exceed the TLV, use an NIOSH approved respirator and
PPE against nuisance dusts.
SKIN PROTECTION: Wear protective cotton gloves
EYE PROTECTION: Wear safety glasses, to minimize eye contact during cutting operations.
EXPOSURE GUIDELINE (S):
Avoid generating dusts and if PEL is exceeded use PPE, barrier creams and
suitable clothing to avoid nuisance dusts.
Saint-Gobain Adfors America, Inc SDS Page 3 of 4
Section 9. Physical and Chemical Properties
APPEARANCE
Laid scrim
reinforcement fabric
made of Black carbon
fiber and Para-armid
yarns, and white
coated polyester
carrier scrims..
PHYSICAL STATE Solid
BOILING POINT Not applicable SOLUBILITY IN WATER < 1%
EVAPORATION RATE Not applicable SPECIFIC GRAVITY (water = 1)
FREEZING POINT Not applicable VAPOR DENSITY Not applicable
MELTING POINT Not applicable VAPOR PRESSURE <0.1mm Hg
MOLECULAR WEIGHT Not applicable VISCOSITY Not applicable
ODOR Faint amine odor % VOLATILE Non Volatile
pH Not applicable STATIC CHARGE Can build Static Charge
Section 10. Stability and Reactivity
CHEMICAL STABILITY: Stable
INCOMPATIBILITY: Avoid strong oxidizers and temperatures over 220C
HAZARDOUS DECOMPOSITION
PRODUCTS:
CO, CO , Hydrocarbons, Oxides of Nitrogen
HAZARDOUS POLYMERIZATION: Does not occur.
Section 11. Toxicological Information and Chronic Exposure
EYE: No known effects
SKIN: May aggravate pre-existing conditions
INGESTION: No known effects
INHALATION: May aggravate pre-existing conditions.
SUBCHRONIC: No known effects
SENSITIZATION: No known effects
TERATOLOGY: None
REPRODUCTION: None
MUTAGENICITY: None
CHRONIC /
CARCINOGENICITY:
No data available
Section 12. Ecological Information
ECOTOXICOLOGICAL
INFORMATION: This product is not associated with or expected to cause any harm to fish,
plants or animals.
CHEMICAL FATE
INFORMATION:
No data available
Section 13. Disposal Considerations
WASTE DISPOSAL: Dispose of as dry waste as per local, state / provincial and federal
regulations.
Saint-Gobain Adfors America, Inc SDS Page 4 of 4
Section 14. Transport Information (Not meant to be all inclusive)
D.O.T. SHIPPING NAME
No
t
reg
ula
ted
PRODUCT LABEL
Not applicable
TECHNICAL SHIPPING NAME
No
t
ap
pli
ca
ble
FREIGHT CLASS PACKAGE
Not applicable
D.O.T. HAZARD CLASS
No
t
reg
ula
ted
FREIGHT CLASS BULK
Not applicable
U.N. / N.A. NUMBER
No
t
ap
pli
ca
ble
D.O.T PLACARD
Not applicable
PRODUCT RQ (LBS)
No
t
ap
pli
ca
ble
D.O.T LABEL
Not applicable
Section 15. Regulatory Information- Not meant to be all inclusive - selected regulation
WHMIS CLASS: Not Regulated Manufactured Article
OSHA STATUS:
This product is not defined as hazardous as defined by OSHA
29CFR part 1910.1200
TSCA STATUS: This product is manufactured in compliance with TSCA, 15 USC
CERCLA REPORTABLE QUANTITY: Not applicable
SARA TITLE III
This product does not contain substance(s) subject to the reporting
requirements of section 313 Title III of the SARA 40 CFR, Part 372
SECTION 302 EXTREMELY
HAZARDOUS SUBSTANCES:
Not applicable
SECTION 311/312 HAZARDOUS
CATEGORIES
Not applicable
SECTION 313 TOXIC CHEMICALS: Not applicable
RCRA STATUS: Landfill is recommended 40 CFR, Part 261
CANADIAN CONTOLLED PRODUCTS
REGULATIONS:
"This product has been classified in accordance with the hazard
criteria of the CPR and the MSDS contains all of the information
required by the CPR
CALIFORNIA PROPOSITION 65: This product contains no ingredients subject to proposition 65
Section 16. Other Information
SDS STATUS: The information presented in this document is true to the best of our knowledge. The
precautions listed are to be considered performance guidelines and not a guarantee. We shall not be liable for
any damages or loss arising from intentional or accidental misuse of our product. This SDS has been prepared
exclusively for this product.
by | Sep 27, 2025
Saint-Gobain Adfors America, Inc SDS Page 1 of 4
CERT
Safety Data Sheet
Section 1. Chemical Product and Company Identification
Product Name: XPC138 Product Code: XPC138
Manufacturer s Name: 24 Hour Emergency Telephone Nu mber:
St. Gobain Adfors America, Inc Chemtrec: 1-800-424-9300
14770 East Ave. Contact number during business hours
Albion, New York Albion Plant: 1-(585)-589-4401
14411, U.S.A.
Date Prepared: November 18, 2014 Date of Expiry: November 18, 2017
Section 2. Composition / Information on Ingredients
This product is composed of continuous filament fiber
Dust may be generated by mechanical processing or abrading of the product.
Component
Wt.
%
LD50
LC50
ACGIH TLV* OSHA PEL
NIOSH
REL
Carbone fiber
CAS # 26125-61-1
77.4 10 mg/m
3
(Inhalable)
3 mg/m
3
(Respirable)
15 mg/m
3
(Total)
5 mg/m
3
(Respirable)
Apra-armide fiber
CAS # 7440-44-0
12.5
Polyester Textile
Continuous
filament
CAS # 25038-59-9
4.0
10mg/m
total dust
3mg/m
respirable
Fiber: 1 fiber/cm
15 mg/m
total dust
5mg/m
respirable
HSPP Voluntary: 1
fiber/cm
See section 16 for
definition of respirable
fibers
5 mg/m
total dust
respirabl
e fibers:
1
fiber/cm
Binder coating is a
proprietary blend
of acrylic and
ethylene based
polymers
6.1
* ACGIH Table of Adopted Values, particulates not otherwise specified, 2003
EMERGENCY OVERVIEW
Section 3. Hazards Identification
Carbon fibers or dust are electrically conductive and may create electrical short-circuits which
could result in damage to and malfunction of electrical equipment and/or personal injury.
EYES: May cause eye irritation when dust is generated or through direct contact.
INHALATION: Mechanical irritation of respiratory tract may occur if dust is inhaled.
SKIN: Prolonged contact may cause mild irritation and itching.
INGESTION:
Ingestion may cause temporary irritation of the digestive tract. If symptoms
develop consult a physician.
Saint-Gobain Adfors America, Inc SDS Page 2 of 4
Section 4. First Aid Measures
INHALATION:
Fibers may cause mechanical irritation to the mouth, nose and throat.
Remove person to fresh air.
EYE CONTACT:
Flush with warm running water for 15 min. Do not rub. If irritation persists,
consult a physician.
SKIN CONTACT:
Wash with mild soap and running water. Use a washcloth to help remove
fibers. If irritation persists, consult a physician.
INGESTION: Unlikely entry route. If symptoms develop consult a physician.
NOTE TO PHYSICIAN: No special instructions
Section 5. Firefighting Information
FLASH POINT: Not applicable METHOD USED: Not applicable
FLAMMABLE LIMITS: Not applicable
LOWER FLAMMABLE: Not applicable UPPER FLAMMABLE: Not applicable
EXTINGUISHING MEDIA: Water, water spray, foam, carbon dioxide, dry chemical
FIRE & EXPLOSION
HAZARDS:
Not applicable
FIRE FIGHTING
INSTRUCTIONS: Thermal decomposition of fabric coating may cause irritating smoke and
fumes.
FIRE FIGHTING EQUIPMENT:
Fire fighters should wear appropriate protective equipment including NIOSH
approved respirators.
Section 6. Accidental Release Measures
SPILL OR LEAK:
Spills should be cleaned up with a vacuum or by a wet sweeping technique.
Do not use compressed air. HEPA filter recommended.
Section 7. Handling and Storage
Store in a cool, dry place. Avoid direct sun. Store below 130F If heated over
212F requires local exhaust. Use P.P.E. appropriate for your situation.
Section 8. Exposure Controls / Personal Protective Equipment
VENTILATION:
Mechanical ventilation recommended for process machinery where dust
generation is expected.
RESPIRATORY
PROTECTION: Where dust levels exceed the TLV, use an NIOSH approved respirator and
PPE against nuisance dusts.
SKIN PROTECTION: Wear protective cotton gloves
EYE PROTECTION: Wear safety glasses, to minimize eye contact during cutting operations.
EXPOSURE GUIDELINE (S):
Avoid generating dusts and if PEL is exceeded use PPE, barrier creams and
suitable clothing to avoid nuisance dusts.
Saint-Gobain Adfors America, Inc SDS Page 3 of 4
Section 9. Physical and Chemical Properties
APPEARANCE
Laid scrim
reinforcement fabric
made of Black carbon
fiber and Para-armid
yarns, and white
coated polyester
carrier scrims..
PHYSICAL STATE Solid
BOILING POINT Not applicable SOLUBILITY IN WATER < 1%
EVAPORATION RATE Not applicable SPECIFIC GRAVITY (water = 1)
FREEZING POINT Not applicable VAPOR DENSITY Not applicable
MELTING POINT Not applicable VAPOR PRESSURE <0.1mm Hg
MOLECULAR WEIGHT Not applicable VISCOSITY Not applicable
ODOR Faint amine odor % VOLATILE Non Volatile
pH Not applicable STATIC CHARGE Can build Static Charge
Section 10. Stability and Reactivity
CHEMICAL STABILITY: Stable
INCOMPATIBILITY: Avoid strong oxidizers and temperatures over 220C
HAZARDOUS DECOMPOSITION
PRODUCTS:
CO, CO , Hydrocarbons, Oxides of Nitrogen
HAZARDOUS POLYMERIZATION: Does not occur.
Section 11. Toxicological Information and Chronic Exposure
EYE: No known effects
SKIN: May aggravate pre-existing conditions
INGESTION: No known effects
INHALATION: May aggravate pre-existing conditions.
SUBCHRONIC: No known effects
SENSITIZATION: No known effects
TERATOLOGY: None
REPRODUCTION: None
MUTAGENICITY: None
CHRONIC /
CARCINOGENICITY:
No data available
Section 12. Ecological Information
ECOTOXICOLOGICAL
INFORMATION: This product is not associated with or expected to cause any harm to fish,
plants or animals.
CHEMICAL FATE
INFORMATION:
No data available
Section 13. Disposal Considerations
WASTE DISPOSAL: Dispose of as dry waste as per local, state / provincial and federal
regulations.
Saint-Gobain Adfors America, Inc SDS Page 4 of 4
Section 14. Transport Information (Not meant to be all inclusive)
D.O.T. SHIPPING NAME
No
t
reg
ula
ted
PRODUCT LABEL
Not applicable
TECHNICAL SHIPPING NAME
No
t
ap
pli
ca
ble
FREIGHT CLASS PACKAGE
Not applicable
D.O.T. HAZARD CLASS
No
t
reg
ula
ted
FREIGHT CLASS BULK
Not applicable
U.N. / N.A. NUMBER
No
t
ap
pli
ca
ble
D.O.T PLACARD
Not applicable
PRODUCT RQ (LBS)
No
t
ap
pli
ca
ble
D.O.T LABEL
Not applicable
Section 15. Regulatory Information- Not meant to be all inclusive - selected regulation
WHMIS CLASS: Not Regulated Manufactured Article
OSHA STATUS:
This product is not defined as hazardous as defined by OSHA
29CFR part 1910.1200
TSCA STATUS: This product is manufactured in compliance with TSCA, 15 USC
CERCLA REPORTABLE QUANTITY: Not applicable
SARA TITLE III
This product does not contain substance(s) subject to the reporting
requirements of section 313 Title III of the SARA 40 CFR, Part 372
SECTION 302 EXTREMELY
HAZARDOUS SUBSTANCES:
Not applicable
SECTION 311/312 HAZARDOUS
CATEGORIES
Not applicable
SECTION 313 TOXIC CHEMICALS: Not applicable
RCRA STATUS: Landfill is recommended 40 CFR, Part 261
CANADIAN CONTOLLED PRODUCTS
REGULATIONS:
"This product has been classified in accordance with the hazard
criteria of the CPR and the MSDS contains all of the information
required by the CPR
CALIFORNIA PROPOSITION 65: This product contains no ingredients subject to proposition 65
Section 16. Other Information
SDS STATUS: The information presented in this document is true to the best of our knowledge. The
precautions listed are to be considered performance guidelines and not a guarantee. We shall not be liable for
any damages or loss arising from intentional or accidental misuse of our product. This SDS has been prepared
exclusively for this product.
by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Soric
is classified as non-hazardous according to EC and
OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Lantor Soric XF
Product Code: XF1015, XF1002, XF1003, XF1004, XF1005,
XF1006, XF1010
Product Name: Lantor Soric SF
Product Code: SF1002, SF1003
Product Name: Lantor Soric TF
Product Code: TF1015102, TF1002102, TF1003102
Product Name: Lantor Soric LRC
Product Code: LRC115, LRC102, LRC103
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components 2,2,4-trimethylpentane 0,5% – 1.5%
Chemicals listed as dangerous
substances. 2,2,4-trimethylpentane CAS 540-84-1
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Soric
in the original package. Store
in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-white
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,125 – 0,155 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Not Applicable
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
2,2,4-trimethylpentane is encapsulated in acrylic copolymer.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Soric
is classified as non-hazardous according to EC and
OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Lantor Soric XF
Product Code: XF1015, XF1002, XF1003, XF1004, XF1005,
XF1006, XF1010
Product Name: Lantor Soric SF
Product Code: SF1002, SF1003
Product Name: Lantor Soric TF
Product Code: TF1015102, TF1002102, TF1003102
Product Name: Lantor Soric LRC
Product Code: LRC115, LRC102, LRC103
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components 2,2,4-trimethylpentane 0,5% – 1.5%
Chemicals listed as dangerous
substances. 2,2,4-trimethylpentane CAS 540-84-1
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Soric
in the original package. Store
in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-white
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,125 – 0,155 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Not Applicable
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
2,2,4-trimethylpentane is encapsulated in acrylic copolymer.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 1 of 5
Lantor Lantor Soric
is classified as non-hazardous according to EC and
OHSA regulations.
A safety datasheet is not required for non-hazardous articles.
The following document provides a Material Safety Guidance Sheet (MSGS) for nonwovens on a voluntary basis
according to EDANA recommendations (Guidelines/instructions relating to MSGS for nonwovens 10/GV8/422).
The MSGS is a means of transferring essential hazard information (including information on transport, handling,
storage and emergency actions) from the supplier of a nonwoven product to the recipient of the product.
As nonwovens are generally not hazardous, MSGS for nonwovens is not legally requested but must be
considered as information. It is inspired from the ECHA_2011_G_08-EN as recommendation for MSGS,
EC1907/2006.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 2 of 5
1. Identification of the product and the company
Identification of the product(s) Product Name: Lantor Soric XF
Product Code: XF1015, XF1002, XF1003, XF1004, XF1005,
XF1006, XF1010
Product Name: Lantor Soric SF
Product Code: SF1002, SF1003
Product Name: Lantor Soric TF
Product Code: TF1015102, TF1002102, TF1003102
Product Name: Lantor Soric LRC
Product Code: LRC115, LRC102, LRC103
Intended use Liner and core material in FRP application
Company identification
Company name Lantor BV
Address P.O. Box 45, 3900 AA Veenendaal, The Netherlands
Contact +31 (0)318 537111; info@lantor.com
2. Hazards identification
Not hazardous under normal conditions according to EC and OHSA regulations.
Keep away from fire.
Accidental thermal decomposition or melting state can present hazards, see section 10
3. Composition / Information on ingredients
Identification of the type of nonwoven product.
Nonwoven Carded web, chemically bonded
Nature of the fibre(s) Polyester (PES)
Web surface treatment Cured acrylic binder
Binder Acrylic
Additives Acrylic copolymer encapsulating a blowing agent
Other major components 2,2,4-trimethylpentane 0,5% – 1.5%
Chemicals listed as dangerous
substances. 2,2,4-trimethylpentane CAS 540-84-1
The product does not contain any other chemicals (in relevant concentration) that are in the list of
dangerous substances.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 3 of 5
4. First aid measures
Under normal condition.
Inhalation No specific measure to be taken.
Skin contact No specific measure to be taken.
Eyes contact Flush with sufficient amount of water for at least 15
minutes. If irritation or other ill effects persist, get
medical help
Ingestion Unlikely. In case of ingestion, get medical help
5. Firefighting measures
Suitable extinguishing media Water(spray), water/foam, carbon dioxide or dry powder.
Extinguishing-media not to be used Water in case short-circuiting is the cause of the fire.
Special exposure hazard For flammable and toxic fumes as well as skin contact
with molten materials see section 10.
Special protective clothing for fire-fighter No special requirements.
6. Accidental release measures
Not Applicable
7. Handling and storage
Handling No Special requirements.
Protection against fire and explosion No special requirements.
Storage Keep Lantor Lantor Soric
in the original package. Store
in a dry, cool and well ventilated area.
The temperature should be above 0 C but must not
exceed 30 C.
Recommended maximum storage duration is 2 years.
8. Exposure controls and personal protection
General measure of protection General room ventilation is recommended.
General protection No special requirements.
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 4 of 5
9. Physical and chemical properties
Appearance Off-white
Odour Neutral
pH Not Applicable
Boiling point/boiling range Not Applicable
Melting point/melting range 250 265 C (PES fibres)
Decomposition temperature 450 C
Flash point Not Applicable
Flammability Not easily flammable (see section 10)
Auto flammability (temperature) > 450 C
Explosive properties Not Applicable
Oxidizing properties Not Applicable
Vapor pressure Not Applicable
Relative density 0,125 – 0,155 (water, room temperature)
Water solubility Insoluble
Fat solubility Insoluble
Styrene solubility Not Applicable
Partition coefficient octanol/water Not Applicable
Material Safety Guidance Sheet
Lantor Soric
Nonwoven Core Material Rev. Apr-20
The information contained in this document has been compiled in good faith by Lantor BV, but nevertheless no representation or
warranty is given as to the accuracy or completeness of the (technical) information provided herein. Lantor BV cannot be held liable of any
damages arising from any (printing) errors or omissions in this information. Lantor BV reserves the right to make changes with respect to
the information provided at any time without further notice Page 5 of 5
10. Stability and reactivity
The materials are chemically stable.
Under thermal decomposition flammable and toxic fumes can be generated. The generation of cleavage
and oxidation products is subject to fire conditions. Non burned residues and contaminated water after
firefighting should be disposed of in compliance with official regulations. Molten material should not be
allowed to be in contact with the skin to which it can cause burns.
11. Toxicological information
No toxic reaction known under normal conditions.
Note: Under decomposition conditions; toxic fumes and contaminated water, see section 10.
12. Ecological information
For transportation, storage, normal use, no toxicological effect known.
2,2,4-trimethylpentane is encapsulated in acrylic copolymer.
13. Disposal considerations
As non-hazardous solid waste, nonwovens can be disposed of, depending on local legislation, through
recycling, incineration or landfill.
14. Transport information
Not classified as hazardous for transport.
Keep the product dry during transportation.
In case of fire see sections 5 and 10
No further specific requirements.
15. Regulatory information
None.
16. Other information
None
by | Sep 27, 2025
by | Sep 27, 2025
Carbon Fabric
Not available.
Solid.
GHS product identifier
Other means of
identification
Product type
Section 1. Identification
:
:
Relevant identified uses of the substance or mixture and uses advised against
SAFETY DATA SHEET
Carbon Fabric
Product use :Article
Area of application :Professional applications.
+1 872 5888271 (SAR)
Emergency telephone
number (with hours of
operation)
Supplier/Manufacturer
SAERTEX USA, LLC
12200 Mt. Holly-Huntersville Rd.
Suite A
Huntersville.
NC 28078 (USA )
Tel +1 704 464 5998
Fax +1 704 464 5922
Mail: info@saertex.com
Website: ww
w.saertex.com
e-mail address of person
responsible for this SDS
info@chemical-check.de; k.schnurbusch@chemical-check.de
Product code :
Section 2. Hazards identification
Classification of the
substance or mixture
:
Signal word :No signal word.
Hazard statements :No known significant effects or critical hazards.
Precautionary statements
Prevention :Not applicable.
Response :Not applicable.
Storage :Not applicable.
Disposal :Not applicable.
GHS label elements
OSHA/HCS status :While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the
safe handling and proper use of the product. This SDS should be retained and available
for employees and other users of this product.
Hazards not otherwise
classified
:None known.
Not classified.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 1/11
United States
Not available.
:
:
:
:
& D U E R Q ) D E U L F
Section 3. Composition/information on ingredients
titanium dioxide – 1 13463-67-7
Ingredient name CAS number%
Other means of
identification
:Not available.
Substance/mixture :Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Other names
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified and hence require reporting in this section.
Wash out mouth with water. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless
directed to do so by medical personnel. Get medical attention if symptoms occur.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Get medical attention if symptoms occur.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:
Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training.
Notes to physician :Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Description of necessary first aid measures
Specific treatments :No specific treatment.
Most important symptoms/effects, acute and delayed
Inhalation :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Ingestion
Skin contact :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation No specific data.
No specific data.
No specific data.
:
:
:
Eye contact :No specific data.
Potential acute health effects
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 2/11
United States
& D U E R Q ) D E U L F
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Toxic gases
No specific fire or explosion hazard.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective
equipment for fire-fighters
In case of fire, use water spray (fog), foam, dry chemical or CO .
Extinguishing media
:
:
:
None known.
Suitable extinguishing
media
:
Unsuitable extinguishing
media
:
Special protective actions
for fire-fighters
:
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Move containers from spill area. Prevent entry into sewers, water courses, basements
or confined areas. Vacuum or sweep up material and place in a designated, labeled
waste container. Dispose of via a licensed waste disposal contractor. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.
:
:No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Large spill :
Move containers from spill area. Vacuum or sweep up material and place in a
designated, labeled waste container. Dispose of via a licensed waste disposal
contractor.Small spill :
Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders:If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in “For non-
emergency personnel”.
Section 7. Handling and storage
Protective measures Put on appropriate personal protective equipment (see Section 8).:
Precautions for safe handling
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 3/11
United States
& D U E R Q ) D E U L F
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Store between the following temperatures: 15 to 35 C (59 to 95 F). Store in accordance
with local regulations. Store in original container protected from direct sunlight in a dry,
cool and well-ventilated area, away from incompatible materials (see Section 10) and
food and drink. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage.
Do not store in unlabeled containers. Use appropriate containment to avoid
environmental contamination. See Section 10 for incompatible materials before
handling or use.
:
:
titanium dioxide OSHA PEL (United States, 5/2018).
TWA: 15 mg/m 8 hours. Form: Total dust
ACGIH TLV (United States, 1/2022).
TWA: 2.5 mg/m 8 hours. Form: respirable fraction,
finescale particles
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: safety glasses with side-
shields.
Eye/face protection
:
:
Body protection Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.:
Environmental exposure
controls
:Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures :
Control parameters
Individual protection measures
Occupational exposure limits
Skin protection
If applicable Nitrile gloves. Leather gloves.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 4/11
United States
& D U E R Q ) D E U L F
Section 8. Exposure controls/personal protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Respiratory protection :
Other skin protection :Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point/freezing point
Relative density
Solid.
Not available.
Not available.
Characteristic.Odor
pH
According to specificationColor
Evaporation rate Not available.
Not available.
Not available.Odor threshold
:
:
:
:
:
:
:
:
Appearance
SADT Not available.:
Decomposition temperature:Not available.
Viscosity Not applicable.:
Flow time (ISO 2431) :Not available.
Density Not available.:
The conditions of measurement of all properties are at standard temperature and pressure unless otherwise indicated.
Flash point Not applicable.:
Boiling point, initial boiling
point, and boiling range
:Not available.
Vapor pressure
Relative vapor density Not applicable.
Not applicable.:
:
Flammability :Not available.
Lower and upper explosion
limit/flammability limit
:Not applicable.
Auto-ignition temperature Not applicable.
Not applicable.Partition coefficient: n-
octanol/water
:
:
Miscible with water :No.
Particle characteristics
Median particle size :Not available.
Other information
Solubility(ies) :Media Result
cold water Not soluble
hot water Not soluble
Physical/chemical
properties comments
:No additional information.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 5/11
United States
& D U E R Q ) D E U L F
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid No specific data.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.Chemical stability :
:
:
Incompatible materials :
Possibility of hazardous
reactions
:Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity :No specific test data related to reactivity available for this product or its ingredients.
Under normal conditions of storage and use, hazardous polymerization will not occur.
No specific data.
Section 11. Toxicological information
Acute toxicity
titanium dioxide LC50 Inhalation Dusts and mistsRat – Male,
Female
5.09 mg/l 4 hours
Product/ingredient name Result Species Dose Exposure
Carcinogenicity
Conclusion/Summary :Not available.
Mutagenicity
Conclusion/Summary :Not available.
Teratogenicity
Conclusion/Summary :Not available.
Reproductive toxicity
Conclusion/Summary :Not available.
Irritation/Corrosion
titanium dioxide Skin – Mild irritant Human – 72 hours 300
ug I
–
Product/ingredient name Result Score Exposure Observation
Sensitization
Not available.
Species
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Not available.
Information on toxicological effects
Classification
titanium dioxide – 2B –
Product/ingredient name NTPIARCOSHA
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 6/11
United States
& D U E R Q ) D E U L F
Section 11. Toxicological information
Information on the likely
routes of exposure
Inhalation :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Ingestion
Skin contact :No known significant effects or critical hazards.
No known significant effects or critical hazards.:Eye contact
No known significant effects or critical hazards.General :
No known significant effects or critical hazards.Carcinogenicity :
No known significant effects or critical hazards.Mutagenicity :
No known significant effects or critical hazards.Reproductive toxicity :
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Inhalation No specific data.
No specific data.
No specific data.
:
:
:
Eye contact :No specific data.
Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure
Not available.
Numerical measures of toxicity
Aspiration hazard
Not available.
:Routes of entry anticipated: Oral, Dermal, Inhalation, Eyes.
Potential acute health effects
Potential immediate
effects
:Not available.
Short term exposure
Potential delayed effects:Not available.
Potential immediate
effects
:Not available.
Long term exposure
Potential delayed effects:Not available.
Acute toxicity estimates
Product/ingredient name
titanium dioxide N/A N/A N/A N/A 5.09
Oral (mg/
kg)
Dermal
(mg/kg)
Inhalation
(gases)
(ppm) Inhalation
(vapors)
(mg/l) Inhalation
(dusts and
mists) (mg/
l)
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 7/11
United States
& D U E R Q ) D E U L F
Section 12. Ecological information
Bioaccumulative potential
Other adverse effects :No known significant effects or critical hazards.
Not available.
Toxicity
titanium dioxide Acute LC50 3 mg/l Fresh water Crustaceans – Ceriodaphnia
dubia – Neonate
48 hours
Acute LC50 6.5 mg/l Fresh water Daphnia – Daphnia pulex –
Neonate
48 hours
Acute LC50 >1000000 g/l Marine waterFish – Fundulus heteroclitus96 hours
Product/ingredient name SpeciesResult Exposure
Conclusion/Summary :Not available.
Persistence and degradability
Soil/water partition
coefficient (KOC)
:Not available.
Mobility in soil
Not available.
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.
:Disposal methods
Section 14. Transport information
–
–
–
–
–
–
–
Not regulated.
–
–
Not regulated. Not regulated.
DOT Classification IMDG IATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 8/11
United States
& D U E R Q ) D E U L F
Section 14. Transport information
Environmental
hazards
Special precautions for user
No. No. No.
Transport within user s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
:
Additional information
Transport in bulk according
to IMO instruments
:Not available.
Section 15. Regulatory information
U.S. Federal regulations
None of the components are listed.Massachusetts
:
:
SARA 313
California Prop. 65
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs) :Not listed
Clean Air Act Section 602
Class I Substances
:Not listed
Clean Air Act Section 602
Class II Substances
:Not listed
DEA List I Chemicals
(Precursor Chemicals)
:Not listed
DEA List II Chemicals
(Essential Chemicals)
:Not listed
New York :None of the components are listed.
New Jersey :None of the components are listed.
Pennsylvania :None of the components are listed.
State regulations
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): Not determined.
SARA 302/304
SARA 304 RQ :Not applicable.
No products were found.
Composition/information on ingredients
Not applicable.
SARA 311/312
Classification :Not applicable.
titanium dioxide 1 CARCINOGENICITY – Category 2
Name % Classification
Composition/information on ingredients
WARNING: This product can expose you to Titanium dioxide, which is known to the State of California to cause
cancer. For more information go to www.P65Warnings.ca.gov.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 9/11
United States
& D U E R Q ) D E U L F
Section 15. Regulatory information
International regulations
Titanium dioxide – –
Ingredient name No significant risk levelMaximum acceptable dosage
level
Chemical Weapon Convention List Schedules I, II & III Chemicals
Montreal Protocol
Not listed.
Stockholm Convention on Persistent Organic Pollutants
Not listed.
Rotterdam Convention on Prior Informed Consent (PIC)
Not listed.
UNECE Aarhus Protocol on POPs and Heavy Metals
Not listed.
Not listed.
Section 16. Other information
History
Chemical Check GmbH
Date of issue/Date of
revision
Version
Prepared by
Date of previous issue
:
:
:
:
11/29/2022
No previous validation
1
Hazardous Material Information System (U.S.A.)
0
0
0
National Fire Protection Association (U.S.A.)
Health Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS
ratings are to be used with a fully implemented HMIS program. HMIS is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS
Personal Protective Equipment (PPE) codes, consult the HMIS Implementation Manual.
/0
0
0
Special hazards
Procedure used to derive the classification
Classification Justification
Not classified.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 10/11
United States
& D U E R Q ) D E U L F
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Notice to reader
References :HCS (U.S.A.)- Hazard Communication Standard
International transport regulations
Key to abbreviations :ATE = Acute Toxicity Estimate
AMP = Acceptable maximum peak above the acceptable ceiling concentration for an
8-hr shift
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. (“Marpol” = marine pollution)
N/A = Not available
UN = United Nations
Indicates information that has changed from previously issued version.
Date of issue/Date of revision :11/29/2022Date of previous issue :No previous validationVersion:1 11/11
United States
