SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 1 of 11
1. Product and company identification
Product identifier
Trade name: Airtac 2 Mega
Relevant identified uses of the substance or mixture and uses advised against
General use: Temporary spray adhesive
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 !F and 101.3 kPa: liquid
Form: Aerosol
Color: amber
Odor: hydrocarbons
Classification: Flammable Aerosol –
Category 1; Compressed Gas; Specific Target Organ Toxicity (Single Exposure) –
Category 3; Aquatic toxicity – chronic – Category 2;
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 2 of 11
Hazard symbols:
Signal word: Danger
Hazard statements:
Extremely flammable aerosol.
Contains gas under pressure; may explode if heated.
May cause drowsiness or dizziness.
Toxic to aquatic life with long lasting effects.
Precautionary statements:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Avoid breathing vapors/spray.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER/doctor if you feel unwell.
Collect spillage.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Protect from sunlight. Store in a well-ventilated place.
Protect from sunlight. Do not expose to temperatures exceeding 50 !C/122 !F.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Heating will lead to pressure increase: Danger of bursting and explosion.
In use, may form flammable/explosive vapor-air mixture.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Mixture containing the substances listed below:
Relevant ingredients:
CAS No. Designation ConcentrationClassification
CAS
64742-49-0
Hydrocarbons,
C6-C7,
isoalkanes,
cyclics, <5%
n-hexane
30 - 60 % Flammable Liquid - Category 2.
Specific Target Organ Toxicity (Single Exposure) -
Category 3. Aspiration Toxicity - Category 1.
Aquatic toxicity - chronic - Category 2.
CAS 109-66-0n-Pentane 5 - 10 % Flammable Liquid - Category 1.
Specific Target Organ Toxicity (Single Exposure) -
Category 3. Aspiration Toxicity - Category 1.
Aquatic toxicity - chronic - Category 2.
CAS
68476-85-7
Petroleum gases,
liquefied
10 - 30 % Flammable Gas - Category 1. Liquefied Gas.
CAS 75-37-6 1,1-Difluoroethane10 - 30 % Flammable Gas - Category 1. Liquefied Gas.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 3 of 11
Additional information:Information about Petroleum gases, liquefied:
Contains < 0.1 % 1,3-Butadiene.
4. First aid measures
General information:Move victim to fresh air. First aider: Pay attention to self-protection!
If medical advice is needed, have product container or label at hand.
In case of inhalation:Provide fresh air. If breathing becomes irregular or ceases, apply rescue breathing or
artificial respiration immediately, where required supply oxygen. Put victim at rest and
keep warm. Seek medical attention.
Following skin contact:Remove residues with soap and water. Take off contaminated clothing and wash it before
reuse. Do not use solvents or thinners. In case of skin reactions, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently
consult an ophthalmologist.
After swallowing: If swallowed, rinse mouth with water (only if the person is conscious). Do not induce
vomiting. Danger of aspiration. Immediately get medical attention.
Most important symptoms/effects, acute and delayed
May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or
cracking.
After resorption: CNS disorders, unconsciousness, pain
Reaction time and coordination may be impaired.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
<= -76 !F (propellant)
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, alcohol resistant foam, carbon dioxide, dry chemical powder
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
Extremely flammable aerosol. Vapors form potentially explosive mixtures with air, which
are heavier than air. Air-Vapor mixture may travel great distances at floor level and lead to
backflash when exposed to an ignition source.
In case of fire may be liberated: Nitrogen oxides (NOx), traces of incompletely burned
carbon compounds, carbon monoxide and carbon dioxide
Protective equipment and precautions for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective
clothing.
Additional information:Container under pressure. Heating will lead to pressure increase: Danger of bursting and
explosion.
Cool endangered containers with water spray and, if possible, remove from danger zone.
Do not allow water used to extinguish fire to enter drains, ground or waterways.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 4 of 11
6. Accidental release measures
Personal precautions:Eliminate all ignition sources if safe to do so. Provide adequate ventilation. Keep
unprotected people away. Evacuate area. Avoid breathing vapors/spray. Avoid contact
with skin and eyes. Wear appropriate protective equipment. Take off contaminated
clothing and wash it before reuse. Keep unprotected people away.
Environmental precautions:
Do not allow to enter into ground-water, surface water or drains. Danger of explosion!
In case of release, notify competent authorities.
Methods for clean-up:Isolate leaked material using non-flammable absorption agent (e.g. sand, earth,
vermiculit, diatomaceous earth) and collect it for disposal in appropriate containers in
accordance with the local regulations (see section 13).
Thoroughly clean surrounding area.
In case of greater quantities: Collect mechanically (use only explosion-proof equipment
when pumping out).
Additional information:Use explosion-proof equipment and non-sparking tools/utensils. Take precautionary
measures against static discharges.
7. Handling and storage
Handling
Advices on safe handling:Avoid breathing vapors/spray.
Do not open or incinerate, even when empty. Do not spray into flames or on
incandescent objects.
Provide good ventilation and/or an exhaust system in the work area. Do not spray into
eyes or onto the skin.
Wear appropriate protective equipment. Do not eat, drink or smoke when using this
product. Wash hands thoroughly after handling. Contaminated work clothing should not
be allowed out of the workplace. Take off contaminated clothing and wash it before reuse.
Precautions against fire and explosion:
Forms explosive mixtures with air. Use only spark proof tools.
Keep away from sources of ignition - No smoking.
Take precautionary measures against static discharges.
Storage
Requirements for storerooms and containers:
Keep in a cool, well-ventilated place. Keep container dry.
Protect from sunlight. Do not expose to temperatures exceeding 50 !C/122 !F.
Store containers in upright position.
Hints on joint storage:Do not store together with: Strong oxidizing agents, strong alkalis, strong acids
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 5 of 11
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
CAS No. Designation Type Limit value
109-66-0n-Pentane USA: ACGIH: TWA 2950 mg/m"; 1000 ppm
USA: NIOSH: Ceiling 1800 mg/m"; 610 ppm
USA: NIOSH: TWA 350 mg/m"; 120 ppm
USA: OSHA: TWA 2950 mg/m"; 1000 ppm
68476-85-7Petroleum gases, liquefiedUSA: NIOSH: TWA 1800 mg/m"; 1000 ppm
USA: OSHA: TWA 1800 mg/m"; 1000 ppm
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
Take precautionary measures against static discharges.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection: Protective clothing, solvent-resistant.
Protective gloves according to OSHA Standard - 29 CFR: 1910.138.
Glove material: PE/PA/PE - Layer thickness: > 0.06 mm
Breakthrough time: > 480 min
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded.
Use filter type A (= against vapors of organic substances) according to OSHA Standard –
29 CFR: 1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product.
General hygiene considerations:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
Separate storage of work clothes. Avoid breathing vapors/spray.
When using do not eat or drink.
Wash hands before breaks and after work.
Take off contaminated clothing and wash it before reuse. Do not spray into eyes or onto
the skin.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 68 !F and 101.3 kPa: liquid
Form: Aerosol
Color: amber
Odor: hydrocarbons
Odor threshold: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 6 of 11
pH: 7 (solution, concentrated)
Melting point/freezing point: No data available
Initial boiling point and boiling range:95 !F (n-Pentane)
Flash point/flash point range: <= -76 !F (propellant)
Evaporation rate: No data available
Flammability: Extremely flammable aerosol.
Explosion limits: LEL (Lower Explosion Limit): 1.40 Vol-% (propellant)
UEL (Upper Explosive Limit): 10.90 Vol-% (propellant)
Vapor pressure: No data available
Vapor density: No data available
Density: at 68 !F: 0.8 g/mL (liquid)
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Viscosity, dynamic: at 68 !F: 200 - 600 mPa*s (liquid)
Viscosity, kinematic: at 68 !F: 250 - 760 mm#/s (liquid)
Explosive properties: Vapors may form explosive mixtures with air.
Oxidizing characteristics: not oxidising
10. Stability and reactivity
Reactivity: Extremely flammable aerosol.
Vapors may form explosive mixtures with air.
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
Pressurised container: May burst if heated.
Conditions to avoid:Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking. Do not pierce or burn, even after use. Do not spray on an open flame or other
ignition source.
Protect from sunlight. Do not expose to temperatures exceeding 50 !C/122 !F.
Incompatible materials:Strong oxidizing agents, strong acids, alkalis
Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 7 of 11
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
Acute toxicity (dermal): Based on available data, the classification criteria are not met.
Acute toxicity (inhalative): Based on available data, the classification criteria are not met.
Skin corrosion/irritation: Based on available data, the classification criteria are not met.
Serious eye damage/irritation: Based on available data, the classification criteria are not
met.
Sensitisation to the respiratory tract: Based on available data, the classification criteria
are not met.
Skin sensitisation: Based on available data, the classification criteria are not met.
Germ cell mutagenicity/Genotoxicity: Based on available data, the classification criteria
are not met.
Carcinogenicity: Based on available data, the classification criteria are not met.
Reproductive toxicity: Based on available data, the classification criteria are not met.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Specific Target Organ Toxicity (Single
Exposure) - Category 3 = May cause drowsiness or dizziness.
Specific target organ toxicity (repeated exposure): Based on available data, the
classification criteria are not met.
Aspiration hazard: Based on available data, the classification criteria are not met.
Symptoms
In case of inhalation: Narcotic effect in case of higher doses or prolonged exposure.
Product may cause headaches, dizziness or troubles of the central nervous system.
chest pressure, chest pain, cough. Leads to unconsciousness in high concentrations.
In case of ingestion:
Dizziness, headache, weakness. intoxication. Irritations of mucous membranes in the
mouth, pharynx, oesophagus and gastrointestinal tract.
After contact with skin: Repeated exposure may cause skin dryness or cracking.
After eye contact: Upon direct contact with eyes may cause burning, tearing, redness.
12. Ecological information
Ecotoxicity
Aquatic toxicity: Toxic to aquatic life with long lasting effects.
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
Volatile organic compounds (VOC):
max. 64 % by weight = 512 g/L
General information:Do not allow to enter into ground-water, surface water or drains.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 8 of 11
13. Disposal considerations
Product
Recommendation: Do not open with force or incinerate, even when empty.
Dispose of waste according to applicable legislation. Do not dispose of with household
waste. This material and its container must be disposed of as hazardous waste.
Package
Recommendation: Dispose of waste according to applicable legislation.
Empty carefully and completely, if possible. Handle empty containers with care.
Incineration may cause explosion.
14. Transport information
14.2 UN proper shipping name
ADR/RID, IMDG: UN 1950, AEROSOLS
IATA-DGR: UN 1950, AEROSOLS, FLAMMABLE
Transport hazard class(es)
ADR/RID: Class 2, Code: 5F
IMDG: Class 2, Subrisk -, see SP63
IATA-DGR: Class 2.1
Packing group
ADR/RID, IATA-DGR: not applicable
IMDG: -
Environmental hazards
Marine pollutant: yes
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Identification number: UN1950
Proper shipping name: UN 1950, AEROSOLS
Hazard class or Division: 2.1
Labels: 2.1
Special provisions: N82
Packaging Exceptions: 306
Packaging Non-bulk: None
Packaging Bulk: None
Quantity limitations Passenger aircraft / rail:
75 kg
Quantity limitations Cargo only: 150 kg
Vessel stowage Location: A
Vessel stowage Other: 25, 87, 126
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 9 of 11
Sea transport (IMDG)
UN number: UN 1950
Proper shipping name: UN 1950, AEROSOLS
Class or division, Subsidary risk: Class 2, Subrisk -, see SP63
Packing Group: -
EmS: F-D, S-U
Special provisions: 63, 190, 277, 327, 344, 381, 959
Limited quantities: See SP277
Excepted quantities: E0
Package - Instructions: P207, LP200
Package - Provisions: PP87, L2
IBC - Instructions: -
IBC - Provisions: -
Tank instructions - IMO: -
Tank instructions - UN: -
Tank instructions - Provisions: -
Stowage and handling: SW1 SW22
Segregation: SG69
Properties and observations: -
Marine pollutant: yes
Segregation group: none
Air transport (IATA)
UN/ID number: UN 1950
Proper shipping name: UN 1950, AEROSOLS, FLAMMABLE
Class or division, Subsidary risk: Class 2.1
Hazard label: Flamm. gas
Excepted Quantity Code: E0
Passenger and Cargo Aircraft: Ltd.Qty.:Pack.Instr. Y203 - Max. Net Qty/Pkg. 30 kg G
Passenger and Cargo Aircraft: Pack.Instr. 203 - Max. Net Qty/Pkg. 75 kg
Cargo Aircraft only: Pack.Instr. 203 - Max. Net Qty/Pkg. 150 kg
Special provisions: A145 A167 A802
Emergency Response Guide-Code (ERG):10L
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 10 of 11
15. Regulatory information
National regulations - U.S. Federal Regulations
Hydrocarbons, C6-C7, isoalkanes,
cyclics, <5% n-hexane:
TSCA Inventory: listed; UVCB
TSCA HPVC: not listed
n-Pentane: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
Clean Air Act:
Accidental Release Prevention: Threshold 10000 lbs. / Basis
for listing = g
NIOSH Recommendations:
Occupational Health Guideline: 0486
Petroleum gases, liquefied: TSCA Inventory: listed; UVCB
TSCA HPVC: not listed
NIOSH Recommendations:
Occupational Health Guideline: 0372
1,1-Difluoroethane: TSCA Inventory: listed
TSCA HPVC: not listed
Clean Air Act:
Accidental Release Prevention: Threshold 10000 lbs. / Basis
for listing = f
National regulations - U.S. State Regulations
1,1-Difluoroethane:California Prop 65 List: None
16. Other information
Text for labeling: Contains 30 - 60 % Hydrocarbons, C6-C7, isoalkanes, cyclics, <5% n-hexane, 5 - 10 %
n-Pentane, 10 - 30 % Petroleum gases, liquefied, 10 - 30 % 1,1-Difluoroethane. Safety
data sheet available on request.
Hazard rating systems:
4
20
NFPA Hazard Rating:
Health: 2 (Moderate)
Fire: 4 (Severe)
Reactivity: 0 (Minimal)
HEALTH 2
FLAMMABILITY 4
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 2 (Moderate)
Flammability: 4 (Severe)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
Airtac 2 Mega
Material number 1171
Revision date: 2/10/2021
Version: 1.0
Language: en-US
Date of first version:2/10/2021
Page: 11 of 11
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods
by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods
by Road
OEL: Occupational Exposure Limit Value
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
CNS: Central Nervous System
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EU: European Union
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
LEL: Lower Explosion Limit
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
STOT SE: Specific target organ toxicity - single exposure
TLV: Threshold Limit Value
UN: United Nations
vPvB: Very persistent and very bioaccumulative
WEL: Workplace Exposure Limit
CNS: Central Nervous System
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT