SAFETY DATA SHEET
Date issued : 01/04/2007
SDS number : TC-895 PART A
Date revised : 11/11/2022
Revision number : 5
TC-895 PART A
1. Identification
Product identifier: TC-895 PART A
Relevant identified uses: Polyurethane resin
Manufacturer / Supplier Emergency telephone number (24 hour)
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. Hazard identification
Classification of the substance or mixture
Health hazards:
Acute Toxicity (Inhalation), Category 4
Skin Sensitization, Category 1
Target Organ Toxicity (Single exposure), Category 3
Label elements
Exclamation
mark
Signal word: WARNING
Hazard statement(s)
H332: Harmful if inhaled.
H317: May cause an allergic skin reaction.
H335: May cause respiratory irritation.
Precautionary statement(s)
Prevention:
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves.
Response:
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312: Call a POISON CENTER/doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
P362+P364: Take off contaminated clothing and wash it before reuse.
Storage:
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
Disposal:
Page 1 of 5
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition/information on ingredients
Chemical name % w/w CAS No.
Hexane, 1,6-diisocyanato-, homopolymer 80 – 10028182-81-2
Hexamethylene-1,6-diisocyanate < 0.25 822-06-0
4. First-aid measures
Eye: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention if irritation develops.
Skin: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
Ingestion: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the patient
is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
Inhalation: Remove to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by
trained personnel. Get immediate medical attention.
Indication of immediate medical attention and special treatment needed, if necessary: Symptomatic and supportive therapy as needed.
Following severe exposure medical follow-up should be monitored for at least 48 hours.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, carbon dioxide, dry chemical, or foam.
Hazardous combustion products: Carbon monoxide, carbon dioxide, nitrogen oxides, and hydrogen cyanide.
Fire fighting procedures: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not release runoff
from fire control methods to sewers or waterways.
Fire fighting equipment: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of unmanned
hose holders or monitor nozzles for fighting large fires.
6. Accidental release measures
Small spill: Evacuate unnecessary personnel from the spill area. Wear necessary personal protective equipment (PPE) as specified in the SDS or
the site emergency response plan. Eliminate all sources of ignition. Ensure adequate ventilation. Dike and contain spill. Prevent product from
entering drains or waterways. Absorb with non-combustible material (such as sand, earth, diatomaceous earth, or vermiculite) and transfer to a
container for disposal according to local/national regulations.
Environmental precautions
Water spill: Do not discharge into drains, surface waters, or groundwater.
General procedures: Refer to section 8 of SDS for personal protection details.
Release notes: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if necessary.
7. Handling and storage
General procedures: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over open containers.
Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
Precautions for safe handling: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle
and use in a manner consistent with good industrial/manufacturing techniques and practices.
Conditions for safe storage: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid
unnecessary contact. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
Storage temperature: 65-80 F (18-27 C)
Shelf life: 6 months from date of shipment under manufacturers recommended storage conditions.
8. Exposure controls/personal protection
Page 2 of 5
TC-895 PART A
Exposure controls
Control parameters
Occupational exposure limit values
Chemical name Type ppm mg/m
3
Hexamethylene-1,6-diisocyanate
OSHA PEL
TWA - -
STEL - -
ACGIH TLV
TWA 0.005 -
STEL - -
NIOSH REL
TWA 0.005 0.035
STEL - -
Appropriate engineering controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
Individual protection measures, such as personal protective equipment
Eye / face protection: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
Skin protection - hand protection: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be
used to prevent contact with eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer
maximum protection.
Respiratory protection: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may
be necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
Skin protection - other: Protective clothing should be selected and used in accordance with "Guidelines for the Selection of Chemical
Protective Clothing" published by ACGIH.
Occupational hygiene practices: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in immediate
work area should be prohibited. Wash hands before eating.
Other use precautions: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Training is
important. Follow all label precautions.
9. Physical and chemical properties
Physical state: Viscous liquid
Color: Pale yellow
Odor: Slight
pH: Not Applicable
Initial boiling point and boiling range: No data available
Flash point: 158 C (316.4 F)
Vapor pressure: < 1 hPa at 20 C (68 F)
Relative vapor density: No data available
Relative density: 1.16 (water=1) at 25 C (77 F)
Solubility: Insoluble, reacts slowly with water
Auto-ignition temperature: 445 C (833 F)
Dynamic viscosity: 1000 Centipoise at 25 C (77 F)
VOC content: Nil
10. Stability and reactivity
Reactivity: Hazardous reactions will not occur under normal transport or storage conditions.
Chemical stability: This product is stable under normal ambient conditions of temperature and pressure.
Page 3 of 5
TC-895 PART A
Conditions to avoid: High temperatures, moisture, and freezing conditions.
Possibility of hazardous reactions: Reacts violently with amines (exothermic). Exothermic reactions with acids, alkalis, powerful oxidants, and
alcohols. Reacts with water, whereby carbon dioxide is produced; pressure may build up in closed containers (danger of bursting).
Hazardous decomposition products: Carbon monoxide, carbon dioxide, nitrogen oxides, and hydrogen cyanide.
Incompatible materials: Water, alcohols, amines, acids, bases, and strong oxidizing agents.
11. Toxicological information
Acute toxicity
Chemical name LD50 (oral) mg/kg(rat) LD50 (dermal) mg/kg(rabbit) LC50 (inhalation) mg/l
Hexane, 1,6-diisocyanato-, homopolymer> 2500 mg/kg Rat > 2000 mg/kg Rat 4600 mg/m3 Rat
Hexamethylene-1,6-diisocyanate 746 to 959 mg/kg Rat > 7000 mg/kg Rat 0.124 mg/l Rat (4 h, vapor)
Skin corrosion / irritation: No data available
Serious eye damage / irritation: No data available
Respiratory or skin sensitization: May cause sensitization by inhalation.
Germ cell mutagenicity: No data available
Reproductive toxicity: No data available
Specific Target Organ Toxicity – single exposure: May cause respiratory irritation.
Specific Target Organ Toxicity – repeated exposure: No data available
Aspiration hazard: No data available
12. Ecological information
Ecotoxicological information: No specific ecological data are available for this product. Refer to Section 6 for information regarding accidental
release and Section 15 for regulatory reporting information.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Other adverse effects: No data available
Mobility in soil: No data available
13. Disposal considerations
Disposal methods: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
14. Transport information
USA Department of Transport Regulations (DOT): Not Regulated
ICAO / IATA – air: Not Regulated
IMO / IMDG – sea: Not Regulated
15. Regulatory information
UNITED STATES
SARA Section 311/312 Hazard Categories
311/312 Health hazards: Refer to Section 2 for hazard classification.
313 reportable ingredients: This product does not contain any substances subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA regulatory: This product contains one or more substances regulated as a hazardous substance under the Comprehensive
Page 4 of 5
TC-895 PART A
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
CERCLA Hazardous Substances and Reportable Quantities (RQ)
Chemical name % w/w CERCLA rq
Hexamethylene-1,6-diisocyanate < 0.25 100 lbs.
TSCA (The Toxic Substances Control Act)
TSCA regulatory: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA Status: This product or its components are listed in or exempt from the TSCA inventory requirements.
Occupational safety and health administration (osha)
29 cfr1910.119---process safety management of highly hazardous chemicals: None of the chemicals in this product are considered highly
hazardous by OSHA.
California Proposition 65: This product does not contain any chemicals which are known to the State of California to cause cancer, birth
defects or other reproductive harm.
USA OSHA Hazard Communication Standard (29CFR 1910.1200): The contents of the SDS comply with the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS Regulatory Status: This product has been classified according to the hazard criteria of the CPR and the SDS contains all the
information required by the CPR.
Domestic Substances List (DSL) / Non-Domestic Substances List (NDSL): All components in this product are listed in or exempted from the
Domestic Substances List (DSL) or the Non-Domestic Substances List (NDSL).
16. Other information
Reason for issue: Revision
Date revised: 11/11/2022
Revision summary: This SDS replaces the 06/25/2019 SDS.
HMIS rating
Health * 2
Flammability 1
Physical hazard 1
Personal protection X
NFPA codes
1
2 1
HMIS ratings notes: Personal Protection: See Section 8
Manufacturer disclaimer: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of
BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes no legal
responsibility for use or reliance upon this data.
Page 5 of 5
TC-895 PART A
SAFETY DATA SHEET
Date issued : 01/04/2007
SDS number : TC-895 PART B
Date revised : 11/11/2022
Revision number : 5
TC-895 PART B
1. Identification
Product identifier: TC-895 PART B
Relevant identified uses: Polyurethane curative
Manufacturer / Supplier Emergency telephone number (24 hour)
BJB Enterprises, Inc.
14791 Franklin Avenue
Tustin, CA 92780
Emergency Phone: (714) 734-8450
CHEMTREC (USA & Canada): (800) 424-9300
or (703) 527-3887 CCN# 2820
2. Hazard identification
Classification of the substance or mixture
Health hazards:
Acute Toxicity (Oral), Category 4
Skin Sensitization, Category 1
Environmental hazards:
Acute Hazards to the Aquatic Environment, Category 2
Chronic Hazards to the Aquatic Environment, Category 3
Label elements
Exclamation
mark
Signal word: WARNING
Hazard statement(s)
H302: Harmful if swallowed.
H317: May cause an allergic skin reaction.
H401: Toxic to aquatic life.
H412: Harmful to aquatic life with long lasting effects.
Precautionary statement(s)
Prevention:
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P264: Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves.
P273: Avoid release to the environment.
Response:
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor/physician if you feel unwell.
P330: Rinse mouth.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
P362+P364: Take off contaminated clothing and wash it before reuse.
Page 1 of 5
P391: Collect spillage.
Disposal:
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition/information on ingredients
Chemical name % w/wCAS No.
1,3-Benzenediamine, 4-methyl-2,6-bis(methylthio)- 30 - 60102093-68-5
Polyether polyol mixture 15 - 40Proprietary
1,3-Benzenediamine, 2-methyl-4,6-bis(methylthio)- 7 - 13104983-85-9
4. First-aid measures
Eye: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Get
medical advice/attention if irritation develops.
Skin: Immediately wash skin with soap and plenty of water. Remove contaminated clothing. Get medical advice/attention if irritation or rash
develops. Wash clothing before reuse.
Ingestion: If swallowed, call a physician immediately. Do not induce vomiting unless directed to do so by medical personnel. Provided the patient
is conscious, wash out mouth with water. Never give anything by mouth to an unconscious person.
Inhalation: Remove to fresh air. Seek medical advice/attention if breathing becomes difficult or if respiratory irritation develops.
Indication of immediate medical attention and special treatment needed, if necessary: Symptomatic and supportive therapy as needed.
Following severe exposure medical follow-up should be monitored for at least 48 hours.
5. Fire-fighting measures
Suitable extinguishing media: Water spray, carbon dioxide, dry chemical, or foam.
Hazardous combustion products: Carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides, and tetrahydrofuran.
Fire fighting procedures: Cool fire exposed containers with water spray. Remove containers from the fire area if possible. Do not release runoff
from fire control methods to sewers or waterways.
Fire fighting equipment: Firefighters should wear positive pressure self-contained breathing apparatus (SCBA) and consider use of unmanned
hose holders or monitor nozzles for fighting large fires.
6. Accidental release measures
Small spill: Evacuate unnecessary personnel from the spill area. Wear necessary personal protective equipment (PPE) as specified in the SDS or
the site emergency response plan. Eliminate all sources of ignition. Ensure adequate ventilation. Dike and contain spill. Prevent product from
entering drains or waterways. Absorb with non-combustible material (such as sand, earth, diatomaceous earth, or vermiculite) and transfer to a
container for disposal according to local/national regulations.
Environmental precautions
Water spill: Do not discharge into drains, surface waters, or groundwater.
General procedures: Refer to section 8 of SDS for personal protection details.
Release notes: Composition and extent of any spill should be evaluated against local regulations and reported to the proper agencies, if necessary.
7. Handling and storage
General procedures: Avoid contact with eyes, skin and clothing. Use only with adequate ventilation. Avoid breathing vapor over open containers.
Avoid open container exposure to damp air. Avoid breathing aerosols, mists, and vapors.
Precautions for safe handling: Use appropriate personal protective equipment as specified in Section 8. Handle in a well-ventilated area. Handle
and use in a manner consistent with good industrial/manufacturing techniques and practices.
Conditions for safe storage: Store in a dry and well-ventilated place, away from excessive heat, in original or similar container. Avoid
unnecessary contact. Protect from freezing. Containers should be tightly sealed to prevent contamination with foreign materials.
Storage temperature: 65-80 F (18-27 C)
Shelf life: 6 months from date of shipment under manufacturers recommended storage conditions.
Page 2 of 5
TC-895 PART B
8. Exposure controls/personal protection
Appropriate engineering controls: Use process enclosures, local exhaust ventilation, or other engineering controls to control airborne levels
below recommended exposure limits.
Individual protection measures, such as personal protective equipment
Eye / face protection: Safety goggles or glasses are recommended. Plastic face shields should be used for complete face protection to protect
against possible splashing or spraying of material. ANSI Z87.1 or approved equivalent.
Skin protection - hand protection: Chemical-resistant gloves and chemical goggles, face-shield, and synthetic apron or coveralls should be
used to prevent contact with eyes, skin, or clothing. Wear nitrile or neoprene gloves. Chemical resistant gloves lined with polyethylene offer
maximum protection.
Respiratory protection: Exhaust ventilation recommended. An organic vapor cartridge or fresh air supplied respirator (NIOSH approved) may
be necessary for certain applications. Consider the type of application, environmental concentrations, and other materials being used
concurrently when determining respirator use and selection. Observe OSHA regulations for respirator use (29 CFR 1910.134).
Skin protection - other: Protective clothing should be selected and used in accordance with "Guidelines for the Selection of Chemical
Protective Clothing" published by ACGIH.
Occupational hygiene practices: Contaminated clothing should be changed and washed before reuse. Eating, drinking and smoking in immediate
work area should be prohibited. Wash hands before eating.
Other use precautions: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Training is
important. Follow all label precautions.
9. Physical and chemical properties
Physical state: Liquid
Color: Amber
Odor: Amine
pH: No data available
Initial boiling point and boiling range: No data available
Flash point: 179.4 C (355 F) Pensky-Martens CC
Vapor pressure: No data available
Relative vapor density: No data available
Relative density: 1.16 (water=1) at 25 C (77 F)
Solubility: Slightly soluble
Dynamic viscosity: 650 Centipoise at 25 C (77 F)
VOC content: < 0.8 g/l Calculated. Theoretical VOC minus water and exempt solvents.
10. Stability and reactivity
Reactivity: Hazardous reactions will not occur under normal transport or storage conditions.
Chemical stability: This product is stable under normal ambient conditions of temperature and pressure.
Conditions to avoid: High temperatures, moisture, and freezing conditions.
Possibility of hazardous reactions: No data available
Hazardous decomposition products: Carbon monoxide, carbon dioxide, nitrogen oxides, sulfur oxides, and tetrahydrofuran.
Incompatible materials: Isocyanates, strong acids, strong bases, and strong oxidizing agents.
11. Toxicological information
Acute toxicity
Page 3 of 5
TC-895 PART B
Chemical name LD50 (oral) mg/kg(rat) LD50 (dermal) mg/kg(rabbit) LC50 (inhalation) mg/l
1,3-Benzenediamine, 4-methyl-2,6-bis(methylthio)- No data available No data available No data available
Polyether polyol mixture No data available No data available No data available
1,3-Benzenediamine, 2-methyl-4,6-bis(methylthio)- No data available No data available No data available
Skin corrosion / irritation: No data available
Serious eye damage / irritation: No data available
Respiratory or skin sensitization: May cause sensitization by skin contact.
Germ cell mutagenicity: No data available
Reproductive toxicity: No data available
Specific Target Organ Toxicity - single exposure: No data available
Specific Target Organ Toxicity - repeated exposure: No data available
Aspiration hazard: No data available
12. Ecological information
Ecotoxicological information: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Avoid release to
the environment.
Persistence and degradability: No data available
Bioaccumulative potential: No data available
Other adverse effects: This product may cause risk of hazardous effects to the environment.
Mobility in soil: No data available
13. Disposal considerations
Disposal methods: The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. This material and its container must be disposed of in a safe way. Dispose of surplus and non-recyclable products via a licensed
waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of
environmental protections and waste disposal legislation and any regional local authority requirements. Avoid dispersal of spilled material and
runoff and contact with soil, waterways, drains and sewers.
14. Transport information
USA Department of Transport Regulations (DOT): Not Regulated
ICAO / IATA - air: Not Regulated
IMO / IMDG - sea: Not Regulated
15. Regulatory information
UNITED STATES
SARA Section 311/312 Hazard Categories
311/312 Health hazards: Refer to Section 2 for hazard classification.
313 reportable ingredients: This product does not contain any substances subject to the reporting requirements of Section 313 of Title III of
the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
CERCLA Hazardous Substances and Reportable Quantities (RQ)
CERCLA regulatory: This product contains one or more substances regulated as a hazardous substance under the Comprehensive
Environmental Response Compensation and Liability Act (CERCLA) (40 CFR 302).
TSCA (The Toxic Substances Control Act)
TSCA regulatory: This product does not contain any substances subject to TSCA Section 12(b) export notification.
TSCA Status: This product or its components are listed in or exempt from the TSCA inventory requirements.
Occupational safety and health administration (osha)
29 cfr1910.119---process safety management of highly hazardous chemicals: None of the chemicals in this product are considered highly
Page 4 of 5
TC-895 PART B
hazardous by OSHA.
California Proposition 65: WARNING: This product can expose you to chemicals including [see table below], which is [are] known to the
State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Chemical name % w/w Listed
Naphthalene < 0.001 Cancer
Ethyl acrylate < 0.00001 Cancer
USA OSHA Hazard Communication Standard (29CFR 1910.1200): The contents of the SDS comply with the OSHA Hazard
Communication Standard 29 CFR 1910.1200.
CANADA
WHMIS Regulatory Status: This product has been classified according to the hazard criteria of the CPR and the SDS contains all the
information required by the CPR.
Domestic Substances List (DSL) / Non-Domestic Substances List (NDSL): All components in this product are listed in or exempted from the
Domestic Substances List (DSL) or the Non-Domestic Substances List (NDSL).
16. Other information
Reason for issue: Revision
Date revised: 11/11/2022
Revision summary: This SDS replaces the 06/25/2019 SDS.
HMIS rating
Health 2
Flammability 1
Physical hazard 0
Personal protection X
NFPA codes
1
2 0
HMIS ratings notes: Personal Protection: See Section 8
Manufacturer disclaimer: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of
BJB Enterprises, Inc. The data on this sheet relates only to the specific material designated herein. BJB Enterprises, Inc. assumes no legal
responsibility for use or reliance upon this data.
Page 5 of 5
TC-895 PART B