1 PRODUCT AND COMPANY IDENTIFICATION
2 HAZARDS IDENTIFICATION
3 COMPOSITION INFORMATION ON INGREDIENTS
4FIRST AID MEASURES
5 FIRE HAZARD
6 ACCIDENTAL RELEASE MEASURES
Safety Data Sheet
Product Name
EG Balsa Contourable Panels including EG Balsa GC, EG Balsa GCP, EG Balsa GCPG, EG Balsa GPGS, EG Balsa GPS, EG
Balsa GFX, EG Balsa GFXP, EG Balsa IC, EG Balsa ICP, EG Balsa LC, EG Balsa LCP, EG Balsa LCPG, EG Balsa LPGS, EG Balsa
PC, EG Balsa PCP,
EG Balsa PCPG, EG Balsa UC, EG Balsa UCP, EG Balsa UCPG, EG Balsa Armor GC, EG Balsa Armor GCG,
EG Balsa Armor GSC, EG Balsa Armor GCP, EG Balsa Armor GCPG, EG Balsa Armor GPGS, EG Balsa Armor GFX, EG Balsa
Armor GFXP, EG Balsa Armor LC, EG Balsa
Armor LCP, EG Balsa Armor LCPG, EG Balsa Armor LPGS, EG Balsa Armor PC,
EG Balsa Armor PCP, EG Balsa Armor PCPG, EG Balsa Armor UC, EG Balsa Armor UCP, EG Balsa Armor UCPG
EG Balsa Rigid Panels including EG Balsa Rigid Panels including EG Balsa GR, EG Balsa GRP,
EG Balsa GRS, EG Balsa
GRPG, EG Balsa IR, EG Balsa IRP, EG Balsa IRPG, EG Balsa LR, EG Balsa LRP, EG Balsa LRPG, EG Balsa PR, EG Balsa PRP,
EG Balsa PRPG, EG Balsa UR, EG Balsa URP, EG Balsa URPG, EG Balsa URSC, EG Balsa FS, EG Balsa Armor
GR, EG Balsa
Armor GRP, EG Balsa Armor GRPG, EG Balsa Armor LR, EG Balsa Armor LRP, EG Balsa Armor LRPG, EG Balsa Armor PR,
EG Balsa Armor PRP, EG Balsa Armor PRPG, EG Balsa Armor UR, EG Balsa Armor URP, EG Balsa Armor URPG
Product Identification Rigid, Scored, Scrimmed, Perforated, or
Coated Balsa Wood Panels
Use of Product Core material used in sandwich construction
Manufacturer/Converter I Core Composites, LLC
Physical Location 802 23rd Street S.W., Cullman, AL 35055 USA
Phone (256) 739 6627
Fax (256) 739 4334
General This product is not hazardous and poses no risk to public health or the environment if used as intended.
When grinding, sanding or
sawing, a fine dust will be produced.
Description
Continuous filament E Glass and Ethylene Vinyl Acetate non hazardous above minimum concentrations
Note: cutting, milling, routing, sanding or otherwise abrading this material may render airborne components subject
to PEL TWA = 15mg/m3.
Clothes Contact Unnecessary
Eye Contact flush eye, upper lid and lower lid with
water; seek medical attention if irritation persists
Skin Contact
Flush with water or wash with soap and water, do not blow. If molten EVA comes in contact with skin, do not pull
from skin, but cool with water.
Inhalation of Dust
evacuate individual to clear air area, if difficulty in breathing persists, administer oxygen, if
breathing stops or
asphyxia is apparent, administer CPR and call for emergency assistance. Keep individual warm and quite.
Inhalation of Gas in the Event of FireMove to fresh air and consult physician.
Ingestion drink water or, if large quantities have been ingested, seek medical attention.
Extinguishing Media Unrestricted carbon dioxide, extinguishing powder, foam & water
Special Firefighting Exposure Do not breathe. Emits toxic fumes
under fire conditions like carbon dioxide and carbon monoxide.
Special Firefighting Equipment Wear self contained breathing apparatus.
Saw dust
balsa saw dust is explosive in certain concentration in the air. Use dust absorbing system which has spark detector
and automatic CO2 extinguishing system.
Personal Protections Unnecessary
Environment Procedure Unnecessary
Clean Up Method Recover mechanically and dispose of according to applicable regulations.
I-Core Composites, LLC
802 23rd Street SW
Cullman, AL 35055
Ph (256) 739 6627
Fx (256) 739 4334
1
Safety Data Sheet
7 HANDLING AND STORAGE
None
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
9 PHYSICAL AND CHEMICAL PROPERTIES
Water Solubility (20 C)
Boiling Point: N/A
10 STABILITY AND REACTIVITY
11 TOXICOLOGICAL INFORMATION
12 ECOLOGICAL INFORMATION
13 DISPOSAL CONSIDERATIONS
14 TRANSPORT INFORMATION
15 REGULATORY INFORMATION
16 OTHER INFORMATION
May 30, 2018
I-Core Composites, Chris Gattiker
Safe Handling Design all working procedures principally to avoid inhalation of dust and eye contact.
Storage
Product is combustible wood and fiberglass and should be stored in cool, dry location away from open flame, heat
sources or other means of
ignition.
Separation of Incompatible Products
Grinding, Sanding & Sawing
Use of a dust/mist respirator approved by NIOSH/MSMA (TC 21C 132) is recommended whenever use of product
results in creation of dust.
Conditions to Avoid Avoid exposure to flames.
Exposure Limits Not applicable
Appearance: wood end grain Odor: None Explosive Properties: None
Density: 80 250 kg/m Melting Point: N/A Lower Explosion Limit: None
Color: white clear brown Ignition
temp: > 200 C Upper Explosion Limit: None
General Information Under normal conditions, product is stable.
Hazardous Decomposition Products No decomposition if used as intended.
General
When used and handled according to specification, the product does not have any harmful effects according to our
experience and knowledge.
Contact with Skin No known allergic reactions. Dust may cause irritation on sensitive
skin.
Eye Contact Dust may cause irritation.
Inhalation Dust may cause irritation of the respiratory tract.
Water Product is not water soluble and has no known effects on ground water.
This product is not a “Hazardous Chemical”.
Last revision
by
This Safety Data Sheet cancels and replaces any previous edition. The data in this safety data sheet describes
the safety requirements of our product and may not be
considered to guaranteeing any product properties. The data in this safety data sheet correspond to our current level of knowledge. We recommend the sharing of
this information with other potential customers and final users. The information reported is based on
available knowledge on safety precautions of the product at
issue date. I Core Composites, LLC does not accept responsibility for workers’ behaviors that are non conforming to the contents of this document. We have no
knowledge of or control over the working conditions. The users are directly responsible for both their
industrial hygiene and their waste disposal.
Degradability Product degrades biologically.
Product Disposal
Balsa dust does not contain any hazardous substances. However, as stated above, dust inhalation, or collection of
dust on floors may cause injury or a hazardous condition to exist.
Use of brooms, vacuums and dust removal systems are recommended. A shop
vacuum is a useful tool for dust and
debris removal from floors and work areas.
User of product should review local, state, and federal regulations concerning health and pollution disposal
procedures to assure its compliance with disposal.
Be aware of high concentration of balsa wood dust in the air => explosion
risk and respiratory problems.
Transportation Product is not classified for any kind of transportation regulation.
I-Core Composites, LLC
802 23rd Street SW
Cullman, AL 35055
Ph (256) 739 6627
Fx (256) 739 4334
2