AQUABUFF 1000W
Safety Data Sheet
according to Regulation (EC) No. 453/2010
Date of issue: 08/01/2016 Revision date: 18/02/2016 Supersedes: 10/09/2014 Version:
18/02/2016 EN (English US) 1/6
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form :Mixture
Trade name :AQUABUFF 1000W
CAS No :mixture
Product code :37AB1000W
Type of product :Coating
Formula :na
Product group :Trade product
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1.Relevant identified uses
Industrial/Professional use spec :Industrial
For professional use only
Use of the substance/mixture :POLISHING COMPOUND
1.2.2.Uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
1.4. Emergency telephone number
Emergency number :773.924.1515
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]Show CLP information + DPD classification in section 2.1
Not classified
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Not classified
Adverse physicochemical, human health and environmental effects
No additional information available
2.2. Label elements
Labeling according to Regulation (EC) No. 1272/2008 [CLP]
No labeling applicable
2.3. Other hazards
No additional information available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
3.2. Mixture
This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH annex II

AQUABUFF 1000W
Safety Data Sheet
according to Regulation (EC) No. 453/2010
18/02/2016 EN (English US) 2/6
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible).
First-aid measures after inhalation :Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell. Allow victim to breathe fresh air. Allow
the victim to rest.
First-aid measures after skin contact :Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). Remove affected clothing and
wash all exposed skin area with mild soap and water, followed by warm water rinse.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention. Rinse immediately with plenty of water. Obtain medical attention if
pain, blinking or redness persist.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Not expected to present a significant hazard under anticipated
conditions of normal use.
Symptoms/injuries after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact :Causes skin irritation.
Symptoms/injuries after eye contact :Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard :Highly flammable liquid and vapor.
Reactivity :No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.
Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.

AQUABUFF 1000W
Safety Data Sheet
according to Regulation (EC) No. 453/2010
18/02/2016 EN (English US) 3/6
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR
VAPORS. Obtain special instructions before use. Do not handle until all safety precautions
have been read and understood. Eliminate all ignition sources if safe to do so. Wash hands and
other exposed areas with mild soap and water before eating, drinking or smoking and when
leaving work. Provide good ventilation in process area to prevent formation of vapor.
Hygiene measures :Wash HANDS thoroughly after handling.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away
from : Keep container closed when not in use.
Incompatible products :Strong bases. Strong acids.
Incompatible materials :Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment :Avoid all unnecessary exposure.
Hand protection :Wear protective gloves.
Eye protection :Chemical goggles or safety glasses.
Skin and body protection :Wear suitable protective clothing.
Respiratory protection :Wear appropriate mask.
Other information :Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :white.
Odor :characteristic.
Odor threshold :No data available
pH :No data available
Relative evaporation rate (butyl acetate=1):No data available
Melting point :No data available
Freezing point :0 C
Boiling point :>= 100 C
Flash point :>= C
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor,Non flammable
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :<= Specific gravity / density :1.5 Solubility :No data available Log Pow :No data available Viscosity, kinematic :No data available Viscosity, dynamic :No data available Explosive properties :No data available Oxidizing properties :No data available Explosion limits :No data available 9.2. Other information No additional information available AQUABUFF 1000W Safety Data Sheet according to Regulation (EC) No. 453/2010 18/02/2016 EN (English US) 4/6 SECTION 10: Stability and reactivity 10.1.Reactivity No reactivity hazard other than the effects described in sub-sections below. 10.2.Chemical stability Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapor. Not established. 10.3.Possibility of hazardous reactions Not established. 10.4.Conditions to avoid Direct sunlight. Extremely high or low temperatures. 10.5.Incompatible materials Strong acids. Strong bases. 10.6.Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information 11.1.Information on toxicological effects Acute toxicity :Not classified Skin corrosion/irritation :Not classified Serious eye damage/irritation :Not classified Respiratory or skin sensitization :Not classified Based on available data, the classification criteria are not met Germ cell mutagenicity :Not classified Carcinogenicity :Not classified Reproductive toxicity :Not classified Based on available data, the classification criteria are not met Specific target organ toxicity (single exposure):Not classified Based on available data, the classification criteria are not met Specific target organ toxicity (repeated exposure) :Not classified Based on available data, the classification criteria are not met Aspiration hazard :Not classified Based on available data, the classification criteria are not met Potential Adverse human health effects and symptoms :Harmful if inhaled. Based on available data, the classification criteria are not met. SECTION 12: Ecological information 12.1.Toxicity No additional information available 12.2.Persistence and degradability AQUABUFF 1000W(mixture) Persistence and degradability Not established. 12.3.Bioaccumulative potential AQUABUFF 1000W(mixture) Bioaccumulative potential Not established. 12.4.Mobility in soil No additional information available 12.5.Results of PBT and vPvB assessment No additional information available 12.6.Other adverse effects :Avoid release to the environment AQUABUFF 1000W Safety Data Sheet according to Regulation (EC) No. 453/2010 18/02/2016 EN (English US) 5/6 SECTION 13: Disposal considerations 13.1.Waste treatment methods Waste disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials :Avoid release to the environment. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN 14.1.UN number UN-No. :NA UN-No. (IATA) :NA UN-No. (IMDG) :NA UN-No. (ADN) :NA 14.2.UN proper shipping name Proper Shipping Name :NOT REGULATED Proper Shipping Name (IATA) :NOT REGULATED Proper Shipping Name (IMDG) :NOT REGULATED Proper Shipping Name (ADN) :NOT REGULATED Transport document description :UN NA 14.3.Transport hazard class(es) Not applicable 14.4.Packing group Not applicable 14.5.Environmental hazards Dangerous for the environment Marine pollutant : : No No Other information :No supplementary information available. 14.6.Special precautions for user 14.6.1.Overland transport Hazard identification number (Kemler No.):30 Orange plates : Transport category (ADR) :2 14.6.2.Transport by sea No additional information available 14.6.3.Air transport No additional information available 14.6.4.Inland waterway transport No additional information available 14.7.Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not applicable SECTION 15: Regulatory information 15.1.Safety, health and environmental regulations/legislation specific for the substance or mixture 15.1.1.EU-Regulations No REACH Annex XVII restrictions Contains no REACH candidate substance Seveso Information : 15.1.2.National regulations No additional information available AQUABUFF 1000W Safety Data Sheet according to Regulation (EC) No. 453/2010 18/02/2016 EN (English US) 6/6 15.2.Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information Other information :None. SDS EU (REACH Annex II) Information herein is given in good faith as authoratative and valid. However no warranty expressed or implied can be made.