40804025F_SDS.pdf

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 08/11/2016 Revision date: 08/11/2016 Supersedes: 09/10/2014

08/11/2016 EN (English US) Page 1

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product form : Mixture
Trade name : HV FAST BONDING PUTTY
CAS No : mixture
Product code : 804-025
Formula : na

1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : BONDING PUTTY

1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316

909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887

1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372

2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :

GHS02

GHS07

GHS08

Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 2/10

P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.

2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients

3.1. Substance
Not applicable
Full text of H-phrases: see section 16

3.2. Mixture

Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 38 Not classified styrene, inhibited (CAS No) 100-42-5 <= 22 Flam. Liq. 3, H226 Acute Tox. 4 (Inhalation:vapour), H332 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Carc. 2, H351 Repr. 2, H361 STOT SE 3, H335 STOT RE 1, H372 fibreglass, diameter > 3 micrometers, length > 5 micrometers (CAS No) 65997-17-3 <= 22 Not classified talc (CAS No) 14807-96-6 <= 12 Not classified cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF exposed or concerned: Get medical advice/attention. First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Specific treatment (see ... on this label). First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. HV FAST BONDING PUTTY Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 08/11/2016 EN (English US) 3/10 4.2. Most important symptoms and effects, both acute and delayed Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if inhaled. May cause respiratory irritation. Symptoms/injuries after skin contact : Causes skin irritation. Symptoms/injuries after eye contact : Causes serious eye irritation. 4.3. Indication of any immediate medical attention and special treatment needed No additional information available SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Special hazards arising from the substance or mixture Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor. Explosion hazard : May form flammable/explosive vapor-air mixture. Reactivity : No reactivity hazard other than the effects described in sub-sections below. 5.3. Advice for firefighters Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No smoking. 6.1.1. For non-emergency personnel Protective equipment : Gloves. Protective goggles. Protective clothing. Emergency procedures : Evacuate unnecessary personnel. 6.1.2. For emergency responders Protective equipment : Equip cleanup crew with proper protection. Emergency procedures : Ventilate area. 6.2. Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. 6.3. Methods and material for containment and cleaning up For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers. Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Additional hazards when processed : Handle empty containers with care because residual vapors are flammable. Precautions for safe handling : Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Eliminate all ignition sources if safe to do so. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Do not breathe dust/fume/gas/mist/vapors/spray. Hygiene measures : Wash ... thoroughly after handling. Do not eat, drink or smoke when using this product. HV FAST BONDING PUTTY Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations 08/11/2016 EN (English US) 4/10 7.2. Conditions for safe storage, including any incompatibilities Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/ equipment. Storage conditions : Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away from : Keep container tightly closed. Incompatible products : Strong bases. Strong acids. Incompatible materials : Sources of ignition. Direct sunlight. Heat sources. 7.3. Specific end use(s) No additional information available SECTION 8: Exposure controls/personal protection 8.1. Control parameters styrene, inhibited (100-42-5) USA ACGIH ACGIH TWA (ppm) 20 ppm USA ACGIH ACGIH STEL (ppm) 20 ppm talc (14807-96-6) USA ACGIH ACGIH TWA (mg/m ) 2 mg/m fibreglass, diameter > 3 micrometers, length > 5 micrometers (65997-17-3)
USA ACGIH ACGIH TWA (mg/m ) 5 mg/m

8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties
Physical state : Liquid

Color : Colourless to yellow.

Odor : characteristic.

Odor threshold : No data available

pH : No data available

Relative evaporation rate (butyl acetate=1) : No data available

Melting point : No data available

Freezing point : No data available

Boiling point : 64 C

Flash point : 30 – 34 C

Auto-ignition temperature : No data available

Decomposition temperature : No data available

Flammability (solid, gas) : No data available

Vapor pressure : No data available

Relative vapor density at 20 C : No data available

Relative density : No data available

Specific gravity / density : 1.43
Solubility : No data available

Log Pow : No data available

Log Kow : No data available

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 5/10

Viscosity, kinematic : No data available

Viscosity, dynamic : No data available

Explosive properties : No data available

Oxidizing properties : No data available

Explosive limits : No data available

9.2. Other information
No additional information available
SECTION 10: Stability and reactivity

10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.

10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapor. Not established. Flammable liquid and
vapor. May form flammable/explosive vapor-air mixture.

10.3. Possibility of hazardous reactions
Not established.

10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.

10.5. Incompatible materials
Strong acids. Strong bases.

10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information

11.1. Information on toxicological effects

Acute toxicity : Not classified

HV FAST BONDING PUTTY ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h

styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h

cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight

Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.

styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 6/10

cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans

talc (14807-96-6)
IARC group 3 – Not classifiable

Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.

Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Causes damage to organs through prolonged or repeated exposure

Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information

12.1. Toxicity

styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)

cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)

talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)

12.2. Persistence and degradability
HV FAST BONDING PUTTY (mixture)
Persistence and degradability Not established.

styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 7/10

cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.

talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable

fibreglass, diameter > 3 micrometers, length > 5 micrometers (65997-17-3)
Persistence and degradability Biodegradability: not applicable. Not established.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable

Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.

12.3. Bioaccumulative potential
HV FAST BONDING PUTTY (mixture)
Bioaccumulative potential Not established.

styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established. cobalt(II) 2-ethylhexanoate (136-52-7) Bioaccumulative potential No bioaccumulation data available. fibreglass, diameter > 3 micrometers, length > 5 micrometers (65997-17-3)
Bioaccumulative potential No bioaccumulation data available. Not established.

Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.

12.4. Mobility in soil

styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)

cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)

12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations

13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to …
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology – waste materials : Avoid release to the environment.
SECTION 14: Transport information

In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 8/10

Transport hazard class(es) (DOT) : 3 – Class 3 – Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 – Flammable liquid

Packing group (DOT) : III – Minor Danger

Additional information
Other information : No supplementary information available.

ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 – Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 – Flammable liquids

Orange plates :

Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 – Flammable liquids
Packing group (IMDG) : III – substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 – Flammable Liquids
Packing group (IATA) : III – Minor Danger
SECTION 15: Regulatory information

15.1. US Federal regulations

styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA’s
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard

15.2. International regulations
CANADA
No additional information available

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 9/10

EU-Regulations
No additional information available

Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350

Full text of H-phrases: see section 16

Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations

styrene, inhibited (100-42-5)
Listed on EPA’s Hazardous Air Pollutants (HAPS)

15.3. US State regulations

styrene, inhibited (100-42-5)
U.S. – California –
Proposition 65 –
Carcinogens List
U.S. – California –
Proposition 65 –
Developmental Toxicity
U.S. – California –
Proposition 65 –
Reproductive Toxicity –
Female
U.S. – California –
Proposition 65 –
Reproductive Toxicity – Male
Non-significant risk level
(NSRL)

styrene, inhibited (100-42-5)
U.S. – Massachusetts – Right To Know List
U.S. – New Jersey – Right to Know Hazardous Substance List
U.S. – Pennsylvania – RTK (Right to Know) – Environmental Hazard List

SECTION 16: Other information

Other information : None.

Full text of H-phrases: see section 16:
—— Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
—— Carc. 2 Carcinogenicity Category 2
—— Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
—— Flam. Liq. 3 Flammable liquids Category 3
—— Repr. 2 Reproductive toxicity Category 2
—— Skin Irrit. 2 Skin corrosion/irritation Category 2
—— STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
—— STOT SE 3 Specific target organ toxicity (single exposure) Category 3
—— H226 Flammable liquid and vapor
—— H315 Causes skin irritation
—— H319 Causes serious eye irritation
—— H332 Harmful if inhaled

HV FAST BONDING PUTTY
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

08/11/2016 EN (English US) 10/10

—— H335 May cause respiratory irritation
—— H351 Suspected of causing cancer
—— H361 Suspected of damaging fertility or the unborn child
—— H372 Causes damage to organs through prolonged or repeated exposure

NFPA health hazard : 2 – Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.

NFPA fire hazard : 3 – Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 – Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.

HMIS III Rating

Health : 2 Moderate Hazard – Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H

SDS US (GHS HazCom 2012)

To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.