Gel Coat
Product name
Product type
Emergency telephone number
Section 1. Identification
Chemical family Aromatic.
Supplier’s details AOC, LLC
955 Highway 57 East
Collierville, TN 38017
E-Mail: aoc.sds@aoc-resins.com
Website: www.aoc-resins.com
Phone Number: (901) 854-2800
Hours: 8AM-5pm (Central Time) Monday-Friday
Relevant identified uses of the substance or mixture and uses advised against
SDS No. NA-1509:3014 (Version: 2.0)
Uses advised against
Identified uses Used in the manufacture of thermoset plastic parts.
No additional information.
G130LQ71196
CHEMTREC Within USA and Canada
CHEMTREC Outside USA and Canada
CANUTEC Within Canada
+1 (800) 424-9300
+1 (703) 527-3887
+1 (613) 996-6666
CCN1023
SAFETY DATA SHEET
Date of issue: 02/01/2017
Date of previous issue: 09/30/2015
Section 2. Hazards identification
OSHA/HCS status
FLAMMABLE LIQUIDS Category 3 H226
SKIN CORROSION/IRRITATION Category 2 H315
SERIOUS EYE DAMAGE/ EYE IRRITATION Category 2 H319
ACUTE TOXICITY (INHALATION) Category 4 H332
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) Category 3 H335
REPRODUCTIVE TOXICITY Category 2 H361d
CARCINOGENICITY Category 2 H351
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) Category 1 H372
ASPIRATION HAZARD Category 1 H304
Classification of the substance or mixture
Signal word
Danger
Hazard statements
H226: Flammable liquid and vapor.
H332: Harmful if inhaled.
H361d: Suspected of damaging the unborn child.
H351: Suspected of causing cancer.
H319: Causes serious eye irritation.
H315: Causes skin irritation.
H335: May cause respiratory irritation.
H372: Causes damage to organs through prolonged or repeated exposure if inhaled.
H304: May be fatal if swallowed and enters airways.
Hazard pictograms
GHS label elements
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Page: 1 of 10G130LQ71196
Section 2. Hazards identification
Precautionary statements
Prevention
P210: Keep away from heat, sparks, open flames and hot surfaces. – No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting/material-handling equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P264: Wash hands thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P260: Do not breathe vapor or mist.
Response
P370+P378: In case of fire: Use dry chemical, CO , water spray (fog) or foam.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P331: Do NOT induce vomiting.
P308+P313: IF exposed or concerned: Get medical advice/attention.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312: Call a POISON CENTER or physician if you feel unwell.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P332+P313: If skin irritation occurs, get medical advice/attention.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing.
P337+P313: If eye irritation persists, get medical advice/attention.
P308+P311: IF exposed or concerned: Call a POISON CENTER or doctor/physician.
P391: Collect spillage.
Storage
P403 + P235: Store in a well-ventilated place. Keep cool.
P233: Keep container tightly closed.
P405: Store locked up.
Disposal
P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.
General
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
Hazards not otherwise classified
None known.
Section 3. Composition/information on ingredients
Ingredient name CAS number %
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Substance/mixture :
Occupational exposure limits, if available, are listed in Section 8.
Mixture.
Styrene 100-42-5 27.7
Carbon Black 1333-86-4 1
Cobalt 2-Ethylhexanoate 136-52-7 0.3
Petroleum Naphtha 64742-95-6 0.3
N,N-Dimethylaniline 121-69-7 0.3
Page: 2 of 10G130LQ71196
Wash out mouth with water. Remove dentures if any. Stop if the exposed person feels sick as vomiting may be dangerous. Do
not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit
does not enter the lungs. Seek immediate medical attention.
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Use of
buffered baby shampoo will aid in removal. If irritation persists, get medical attention.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. If irritation persists,
seek medical attention. Wash contaminated clothing before reuse. Clean shoes thoroughly before reuse.
Move the victim to a safe area as soon as possible. Allow the victim to rest in a well-ventilated area. If breathing is difficult, give
oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion
Notes to physician
Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Description of necessary first aid measures
Most important symptoms/effects, acute and delayed
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Irritating to mouth, throat and stomach.
Causes serious eye irritation.
Causes skin irritation.
Harmful if inhaled. May cause respiratory irritation.
Eye contact
Skin contact
Inhalation
Ingestion
Over-exposure signs/symptoms
Eye contact
Inhalation
Skin contact
Ingestion
Adverse symptoms may include the following: pain or irritation, watering, redness.
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Adverse symptoms may include the following: irritation, redness.
Adverse symptoms may include the following: Irritating to mouth, throat and stomach..
Section 5. Fire-fighting measures
Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or
drain.
Hazardous thermal decomposition products
Specific hazards arising from the chemical
Decomposition products may include the following materials: carbon dioxide, carbon monoxide, sulfur oxides halogenated
compounds, metal oxide/oxides
Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a
subsequent explosion. The vapor/gas is heavier than air and will spread along the ground. Vapors may accumulate in low or
confined areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or
explosion hazard. This material is harmful to aquatic life with long lasting effects. Fire water contaminated with this material must
be contained and prevented from being discharged to any waterway, sewer or drain.
Special protective equipment for fire-fighters
Use dry chemical, CO , water spray (fog) or foam.
Extinguishing media
Do not use water jet.
Suitable extinguishing media
Unsuitable extinguishing media
Special protective actions for fire-fighters
Page: 3 of 10G130LQ71196
Section 5. Fire-fighting measures
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece
operated in positive pressure mode.
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water
courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and
collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Use spark-proof tools and explosion-proof equipment.
Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled
product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities
if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to
the environment if released in large quantities.
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-
insoluble, absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and
explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Methods and materials for containment and cleaning up
For non-emergency personnel
For emergency responders
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Do not touch or
walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or
mist. Provide adequate ventilation.
If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable
materials. Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. See
also the information in “For non-emergency personnel”.
Small spill
Large spill
Section 7. Handling and storage
Advice on general occupational hygiene
Conditions for safe storage, including any incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers
should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment
before entering eating areas. See also Section 8 for additional information on hygiene measures.
Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink.
Eliminate all ignition sources. Segregate from oxidizing materials. Keep container tightly closed and sealed until ready for use.
Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled
containers. Use appropriate containment to avoid environmental contamination. Refer to the product label and/or technical data
sheet for further information.
Protective measures
Put on appropriate personal protective equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas
where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas. Do not breathe vapor or mist. Do not
ingest. Avoid contact with eyes, skin and clothing. Avoid release to the environment. Use only with adequate ventilation. Wear
appropriate respirator when ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately
ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when
not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use only non-sparking tools. Take precautionary measures against
electrostatic discharges. Empty containers retain product residue and can be hazardous. Do not reuse container.
Precautions for safe handling
Page: 4 of 10G130LQ71196
Styrene ACGIH TLV (United States, 3/2015).
TWA: 20 ppm 8 hours.
TWA: 85 mg/m 8 hours.
STEL: 40 ppm 15 minutes.
STEL: 170 mg/m 15 minutes.
OSHA PEL Z2 (United States, 2/2013).
TWA: 100 ppm 8 hours.
CEIL: 200 ppm
AMP: 600 ppm 5 minutes.
NIOSH REL (United States, 10/2013).
TWA: 50 ppm 10 hours.
TWA: 215 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
STEL: 425 mg/m 15 minutes.
Carbon Black NIOSH REL (United States, 6/2009).
TWA: 3.5 mg/m 10 hours.
TWA: 0.1 mg of PAHs/cm 10 hours.
OSHA PEL (United States, 6/2010).
TWA: 3.5 mg/m 8 hours. Form:
ACGIH TLV (United States, 3/2012).
TWA: 3 mg/m 8 hours. Form: Inhalable fraction
Cobalt 2-Ethylhexanoate OSHA PEL (United States).
TWA: 0.1 mg/m
ACGIH TLV (United States, 3/2015).
TWA: 0.02 mg/m , (as Co) 8 hours.
N,N-Dimethylaniline ACGIH TLV (United States, 3/2015). Absorbed through skin.
TWA: 5 ppm 8 hours.
TWA: 25 mg/m 8 hours.
STEL: 10 ppm 15 minutes.
STEL: 50 mg/m 15 minutes.
NIOSH REL (United States, 10/2013). Absorbed through skin.
TWA: 5 ppm 10 hours.
TWA: 25 mg/m 10 hours.
STEL: 10 ppm 15 minutes.
STEL: 50 mg/m 15 minutes.
OSHA PEL (United States, 2/2013). Absorbed through skin.
TWA: 5 ppm 8 hours.
TWA: 25 mg/m 8 hours.
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Hand protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists or dusts.
Eye/face protection
Respiratory protection
Body protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should
be approved by a specialist before handling this product.
Appropriate engineering controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep
worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need
to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at
the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Ensure that
eyewash stations and safety showers are close to the workstation location.
Hygiene measures
Control parameters
Individual protection measures
Occupational exposure limits
Other skin protection
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the
risks involved and should be approved by a specialist before handling this product.
Page: 5 of 10G130LQ71196
Section 8. Exposure controls/personal protection
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
-23.8 F / -30.6 C (Styrene)
1.1 to 1.4 (Water = 1)
3.6 (Air = 1) (Styrene )
5.0 mm Hg@ 68 F / 20 C (Styrene)
Slight.
Aromatic.Odor
pH
Grey.Color
Evaporation rate < 1 (Butyl acetate = 1)
Auto-ignition temperature
Flash point
914 F / 490 C (Styrene)
88 F / 31 C (Styrene)
Not available.
Not applicable.
Viscosity Not available.
0.01 - 0.1 ppm (Styrene)Odor threshold
Partition coefficient: n-octanol/water
Appearance
Boiling point 293 F / 145 C (Styrene)
Flammability (solid, gas) Not applicable.
Lower and upper explosive (flammable) limits Lower: 1.1% Upper: 6.1% (Styrene)
Molecular weight Not available.
Decomposition temperature Not available.
Section 10. Stability and reactivity
Hazardous decomposition products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose
containers to heat or sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
The product is stable. Stable under recommended storage and handling conditions (see Section 7).
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials
Incompatible materials
Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
Styrene LC50 Inhalation Gas. Rat 2770 ppm 4 hours
LC50 Inhalation Vapor Rat 11800 mg/m 4 hours
LD50 Oral Rat 2650 mg/kg -
Carbon Black LC50 Inhalation Dusts and mists Rat 6750 mg/m 4 hours
LD50 Dermal Rabbit >3000 mg/kg –
LD50 Oral Rat >15400 mg/kg –
LD50 Oral Rat >15400 mg/kg –
Cobalt 2-Ethylhexanoate LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 1.22 g/kg –
LD50 Oral Rat 6171 mg/kg –
Petroleum Naphtha LD50 Oral Rat 8400 mg/kg –
N,N-Dimethylaniline LD50 Dermal Rabbit 1770 mg/kg –
Product/ingredient name Result Species Dose Exposure
Information on toxicological effects
Page: 6 of 10G130LQ71196
Section 11. Toxicological information
LD50 Oral Rat 1120 mg/kg –
Carcinogenicity
Mutagenicity
Teratogenicity
Reproductive toxicity
Irritation/Corrosion
Styrene Eyes – Mild irritant Human – 50 parts per
million
–
Eyes – Moderate irritant Rabbit – 24 hours 100
milligrams
–
Eyes – Severe irritant Rabbit – 100 milligrams-
Skin – Mild irritant Rabbit – 500 milligrams-
Skin – Moderate irritant Rabbit – 100 Percent –
N,N-Dimethylaniline Eyes – Moderate irritant Rabbit – 24 hours 20
milligrams
–
Eyes – Moderate irritant Rabbit – 20 milligrams –
Skin – Mild irritant Rabbit – 24 hours 500
milligrams
–
Skin – Mild irritant Rabbit – 500 milligrams-
Product/ingredient name Result Score Exposure Observation
Sensitization
Species
Inhalation
Harmful if inhaled. May cause respiratory irritation.
Irritating to mouth, throat and stomach.
Ingestion
Skin contact
Causes skin irritation.
Causes serious eye irritation.
Eye contact
Symptoms related to the physical, chemical and toxicological characteristics
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Eye contact
Adverse symptoms may include the following: pain or irritation, watering, redness.
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Aspiration hazard
Potential acute health effects
Classification
Styrene – 2B Reasonably anticipated to be a human carcinogen.
Carbon Black – 2B –
Cobalt 2-Ethylhexanoate – 2B –
N,N-Dimethylaniline – 3 –
Product/ingredient name NTPIARCACGIH
May cause sensitization by skin contact.
No mutagenic effect.
1) Negative Study A published study concluded that the mechanism for producing cancer in mice exposed to styrene
is not applicable in human metabolism. (June 2013 Pharmacology & Toxicology 66 (2013))
2) Negative Study A recent update to an extensive study of reinforced plastic workers from 1948-1977 concluded that
there was no coherent evidence that styrene exposure increased risk of cancer (March 2013 Epidemiology Vol. 24
Issue 2)
3) Positive Study Styrene induced pulmonary toxicity and carcinogenicity in mice was shown to be caused by a
metabolite of styrene, probably styrene oxide. (Dec.2001 Toxicology Vol.169 Issue 2)
Not considered to be toxic to the reproductive system.
No known effect according to our database..
No known effect according to our database.
A study of long term effects of workers exposed to styrene levels in the range of 25-35 ppm, 8 hour TWA, indicated a
possible mild hearing loss.
No known effect according to our database.
Inhalation
Page: 7 of 10G130LQ71196
Section 11. Toxicological information
Skin contact
Ingestion
Adverse symptoms may include the following: Irritating to mouth, throat and stomach..
Adverse symptoms may include the following: irritation, redness.
Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects
No known effect according to our database.
Product/ingredient name
Styrene 2.95 13.49 low
N,N-Dimethylaniline 2.31 7.943282347 low
Product/ingredient name Aquatic half-life Photolysis Biodegradability
Styrene – – Readily
Toxicity
Styrene Acute EC50 4.7 mg/l Fresh water Daphnia – Daphnia magna 48 hours
Acute LC50 4.02 mg/l Fresh water Fish – Pimephales promelas 96 hours
N,N-Dimethylaniline Acute EC50 22000 g/l Fresh water Algae – Chlorella pyrenoidosa 72 hours
Acute EC50 2.3 mg/l Fresh water Daphnia – Daphnia magna 48 hours
Acute LC50 52600 g/l Fresh water Fish – Pimephales promelas 96 hours
Chronic NOEC 14000 g/l Fresh water Algae – Chlorella pyrenoidosa 72 hours
Product/ingredient name SpeciesResult Exposure
Persistence and degradability
Styrene EU 100 % – Readily – 1 days – –
Product/ingredient name Test DoseResult Inoculum
Soil/water partition coefficient (KOC)
Not available.
Mobility in soil
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some
product residues. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of
this product, solutions and any by-products should at all times comply with the requirements of environmental protection
and waste disposal legislation and any regional local authority requirements. Avoid disposal. Attempt to use product
completely in accordance with intended use. Waste packaging should be recycled. Incineration or landfill should only be
considered when recycling is not feasible.
Disposal methods
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any available use-specific information
provided in the Exposure Scenario(s).
Special precautions
This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers
that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Do not cut, weld
or grind used containers unless they have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff
and contact with soil, waterways, drains and sewers.
Section 14. Transport information
Resin Solution
3
UN1866UN number
Proper shipping name
Transport hazard class(es)
DOT / TDG/ IMDG/IMO / ICAO/IATA and National regulations.
Page: 8 of 10G130LQ71196
Section 14. Transport information
IIIPacking group
Additional information US regulations require the reporting of spills when the amount exceeds the Reportable
Quantity (RQ) for specific components of this material. See CERCLA in Section 15,
Regulatory Information, for the Reportable Quantities.
Environmental hazards Marine pollutant: No.
Special precautions for user Transport within user s premises: always transport in closed containers that are upright
and secure. Ensure that persons transporting the product know what to do in the event of
an accident or spillage.
IMDGEmergency schedules (EmS): F-E, S-E
Remarks: FP-31 C
IATANo additional information.
Section 15. Regulatory information
Inventories (National and International)
:All components are listed or exempted.
SARA 313
Product name
Styrene 100-42-5
Cobalt 2-Ethylhexanoate 136-52-7
Form R – Reporting
requirements
SARA 311/312
Styrene Yes. No. No. No. Yes.
Carbon Black No. No. No. No. Yes.
Cobalt 2-Ethylhexanoate No. No. No. Yes. Yes.
Petroleum Naphtha Yes. No. No. Yes. Yes.
N,N-Dimethylaniline Yes. No. No. Yes. Yes.
Name Fire
hazard
Sudden
release of
pressure
Reactive Immediate
(acute)
health hazard
Delayed
(chronic)
health hazard
Composition/information on ingredients
United States inventory (TSCA 8b)
Australia (AICS) :Not determined.
Canada (DSL) :At least one component is not listed in DSL but all such components are listed in NDSL.
China (IECSC) :All components are listed or exempted.
Europe (EINECS) :Not determined.
Japan (ENCS) :Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Republic of Korea (KECI) :Not determined.
Malaysia (EHS Register) :Not determined.
New Zealand (NZIoC) :Not determined.
Philippines (PICCS) :Not determined.
Taiwan (CSNN) :Not determined.
CAS number
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains less than 1% of a chemical known to the State of California to cause birth defects or other reproductive
harm.
California Prop. 65
State regulations
Styrene – 1000 lbs. (453.6 kg)CERCLA RQ –
Page: 9 of 10G130LQ71196
Section 16. Other information
History
Date of issue
Version
The information contained in this data sheet is furnished in good faith and without warranty, representation, or inducement or license of any kind,
except that it is accurate to the best of AOC, LLC’s knowledge, or was obtained from sources believed by AOC, LLC to be reliable. The
accuracy, adequacy or completeness of health and safety precautions set forth herein cannot be guaranteed, and the buyer is solely
responsible for ensuring that the product is used, handled, stored, and disposed of safely and in compliance with applicable federal, state or
provincial, and local laws. AOC, LLC disclaims liability for any loss, damage or personal injury that arises from, or is in any way related to, use
of the information contained in this data sheet.
Notice to reader
Date of previous issue
:
:
:
Indicates information that has changed from previously issued version.
Key to abbreviations :ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by
the Protocol of 1978. (“Marpol” = marine pollution)
UN = United Nations
02/01/2017
09/30/2015
2.0
1
3
2
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright 1997, National Fire Protection Association, Quincy, MA 02269. This
reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.
Copyright 2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and
reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only.
Whether the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.
AOC Corporate Regulatory Affairs
This Safety Data Sheet (SDS) and its content are the confidential and proprietary information of AOC and it may not be modified, altered,
deconstructed, or presented in any other manner, without the explicit authorization of AOC and/or its legal counsel.
Page: 10 of 10G130LQ71196