PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products
Regulations (HPR) WHMIS 2015
Date of issue: 09/10/2015 Revision date: 01/25/2019 Version: SBE-460 -2019a
`
01/25/2019 EN (English) Page 1
SECTION 1: Identification
Identification
Product form : Mixtures
Product name : PRO-SET SBE-460 Accelerator
Product code : SBE-460, SBE-460-P, SBE-460-PT, SBE-460-G, SBE-460-GAL
Relevant identified uses of the substance or mixture and uses advised against
Recommended use : Epoxy system cure accelerator.
Details of the supplier of the safety data sheet
Manufacturer
Gougeon Brothers, Inc
100 Patterson Ave.
Bay City, MI 48706 – U.S.A.
T 888-377-6738 or 989-684-7286
www.prosetepoxy.com
Emergency telephone number
Emergency number : CHEMTREC 1 (800) 424-9300
CHEMTREC International +1 (703) 527-3887 24 hr
SECTION 2: Hazard(s) identification
Classification of the substance or mixture
Acute Tox. 4 (Oral)
Acute Tox. 4 (Dermal)
Skin Corr. 1A
Eye Dam. 1
STOT SE 3
Label elements
Hazard pictograms (GHS) :
GHS05
GHS07
Signal word (GHS)
:
Danger
Hazard statements (GHS)
:
Harmful if swallowed or in contact with skin. Causes severe skin burns and eye damage. May cause respiratory irritation
Precautionary statements (GHS)
:
Do not breathe dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after handling. Do not eat, drink or smoke when using this product. Use
only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: rinse mouth. Do
NOT induce vomiting. If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing
before reuse. If inhaled: Remove person to fresh air and keep comfortable for breathing. Call a poison center/doctor if you feel unwell. If in eyes:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison
center/doctor. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of contents/ container to hazardous or special
waste collection point, in accordance with local, regional, national and/or international regulation
Other hazards
No additional information available.
Unknown acute toxicity
No additional information available
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 2/7
SECTION 3: Composition/information on ingredients
Substance
Not applicable
Mixtures
Name Product identifier HPR %
Water
(CAS No) 7732-18-5 80 – 100
Hydrochloric acid
(CAS No) 7647-01-0 10 – 30
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information (CBI). Any
ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may be present at a level
below its disclosure threshold.
SECTION 4: First aid measures
Description of first aid measures
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Call a poison center or a doctor if you feel unwell.
First-aid measures after skin contact : IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER
or doctor/physician.
First-aid measures after eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to
do, remove contact lenses, if worn. Get medical attention immediately.
First-aid measures after ingestion : If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never
give anything by mouth to an unconscious person. Immediately call a POISON CENTER or
doctor/physician.
Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Harmful in contact with skin. Causes severe burns. Symptoms may include redness, pain,
blisters. Repeated exposure to this material can result in absorption through skin causing
significant health hazard.
Symptoms/injuries after eye contact : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva. May cause burns.
Symptoms/injuries after ingestion : Harmful if swallowed. May cause stomach distress, nausea or vomiting. May cause burns or
irritation of the linings of the mouth, throat, and gastrointestinal tract.
Indication of any immediate medical attention and special treatment needed
Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where
possible).
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media : Water spray. Dry chemical. Alcohol-resistant foam. Carbon dioxide.
Unsuitable extinguishing media : None known.
Special hazards arising from the substance or mixture
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, hydrogen
chloride. Toxic and irritating gases may be released.
Reactivity : No dangerous reaction known under conditions of normal use.
Advice for firefighters
Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory
protection (SCBA).
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
For non-emergency personnel
No additional information available
For emergency responders
No additional information available
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 3/7
Environmental precautions
Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information.
Methods and material for containment and cleaning up
For containment : Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand, vermiculite),
then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use
appropriate Personal Protective Equipment (PPE).
Methods for cleaning up : Scoop up material and place in a disposal container. Provide ventilation.
Reference to other sections
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal.
SECTION 7: Handling and storage
Precautions for safe handling
Precautions for safe handling : Do not get in eyes, on skin, or on clothing. Do not breathe dust/fume/gas/mist/vapours/spray.
Do not swallow. Handle and open container with care. Use only outdoors or in a well-ventilated
area. Do not eat, drink or smoke when using this product.
Hygiene measures : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Contaminated work clothing should not be allowed out of the workplace.
Conditions for safe storage, including any incompatibilities
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in a dry, cool and well-
ventilated place. Protect from sunlight. Storage temperature : 40 F (4 C) – 77 F (25 C).
SECTION 8: Exposure controls/personal protection
Control parameters
Water (7732-18-5)
Not applicable
Hydrochloric acid (7647-01-0)
ACGIH ACGIH Ceiling (ppm) 2 ppm Ceiling limit C is to be determined by
breathing zone air samples.
OSHA OSHA PEL (Ceiling) (mg/m ) 7 mg/m
OSHA OSHA PEL (Ceiling) (ppm) 5 ppm
IDLH US IDLH (ppm) 50 ppm
NIOSH NIOSH REL (ceiling) (mg/m ) 7 mg/m
NIOSH NIOSH REL (ceiling) (ppm) 5 ppm
Exposure controls
Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Hand protection : Wear chemically resistant protective gloves.
Eye protection : Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles)
and face protection (face shield).
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Environmental exposure controls : Maintain levels below Community environmental protection thresholds.
Other information : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands
carefully before eating or smoking. Handle according to established industrial hygiene and
safety practices.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Physical state : Liquid
Appearance : No data available
Colour : Colourless
Odour : Strong, irritating
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 4/7
Odour threshold : No data available
pH : 1.08
Melting point : No data available
Freezing point : No data available
Boiling point : > 200 F (93 C)
Flash point : No data available
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Non flammable.
Vapour pressure : 253 hPa (190 mmHg) @ 77 F (25 C)
Relative vapour density at 20 C : No data available
Relative density : 1
Solubility : Water: 100 %
Partition coefficient n-octanol/water : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
Other information
VOC content : SBE-160 / SBE-262 / SBE-460: 27.13 g/L (0.23 lbs/gal);
SBE-160 / SBE-265 / SBE-460: 28.16 g/L (0.24 lbs/gal)
Bulk density : 8.3 lb/gal (1.00 kg/L)
SECTION 10: Stability and reactivity
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : Stable under normal storage conditions.
Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use.
Conditions to avoid : Heat. Incompatible materials.
Incompatible materials : Strong oxidizers. Caustics. Alkalis. Cyanides. Metals.
Hazardous decomposition products : May include, and are not limited to: oxides of carbon, hydrogen chloride, and hydrogen in
contact with metals, chlorine from oxidizers. Toxic and irritating vapours.
SECTION 11: Toxicological information
Information on toxicological effects
Water (7732-18-5)
LD50 oral rat > 90 ml/kg
Hydrochloric acid (7647-01-0)
LD50 oral rat 900 mg/kg
LD50 dermal rabbit 1449 mg/kg
LC50 inhalation 1108 ppm/1h (mouse); 3124 mg/l 1h (rat)
Acute toxicity (oral) : Oral: Harmful if swallowed.
Acute toxicity (dermal) : Dermal: Harmful in contact with skin.
Acute toxicity (inhalation) : Not classified.
Skin corrosion/irritation : Causes severe skin burns
Serious eye damage/irritation : Causes serious eye damage.
Respiratory or skin sensitization : Not classified.
Germ cell mutagenicity : Not classified.
Carcinogenicity : Not classified.
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 5/7
Hydrochloric acid (7647-01-0)
IARC group 3 – Not classifiable
Reproductive toxicity : Not classified.
Specific target organ toxicity (single
exposure)
: May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Not classified.
Aspiration hazard : Not classified.
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Harmful in contact with skin. Causes severe burns. Symptoms may include redness, pain,
blisters. Repeated exposure to this material can result in absorption through skin causing
significant health hazard.
Symptoms/injuries after eye contact : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva. May cause burns.
Symptoms/injuries after ingestion : Harmful if swallowed. May cause stomach distress, nausea or vomiting. May cause burns or
irritation of the linings of the mouth, throat, and gastrointestinal tract.
Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.
SECTION 12: Ecological information
Toxicity
Ecology – general : May cause long-term adverse effects in the aquatic environment.
Persistence and degradability
PRO-SET SBE-460 Accelerator
Persistence and degradability Not established.
Bioaccumulative potential
PRO-SET SBE-460 Accelerator
Bioaccumulative potential Not established.
Mobility in soil
No additional information available
Other adverse effects
Effect on the global warming : No known effects from this product.
Ingredient CAS# Ecotoxicity Classification Information
Water 7732-18-5 Does not meet classification criteria.
Hydrochloric acid 7647-01-0 Does not meet classification criteria.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
Waste treatment methods
Product/Packaging disposal
recommendations
: Avoid release to the environment. This material must be disposed of in accordance with all
local, state, provincial, and federal regulations. The generation of waste should be avoided or
minimized wherever possible.
SECTION 14: Transport information
Department of Transportation (DOT) and Transportation of Dangerous Goods (TDG)
In accordance with DOT/TDG
UN-No.(DOT/TDG) : UN1789
Proper Shipping Name (DOT/TDG) : Hydrochloric acid
Class (DOT/TDG) : 8
Packing group (DOT/TDG) : II
Transport by sea
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 6/7
In accordance with IMDG
UN-No. (IMDG) : 1789
Proper Shipping Name (IMDG) : HYDROCHLORIC ACID
Class (IMDG) : 8
Packing group (IMDG) : II
EmS Number : F-A, S-B
Marine Pollutant : No
Transport by air
In accordance with IATA
UN-No. (IATA) : 1789
Proper Shipping Name (IATA) : Hydrochloric acid
Class (IATA) : 8
Packing group (IATA) : II
Marine Pollutant : No
SECTION 15: Regulatory information
Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic
Substances List) inventories.
Hydrochloric acid (7647-01-0)
Listed on the United States SARA Section 302
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 5000 lb
SARA Section 302 Threshold Planning Quantity (TPQ) 500 lb (gas only)
SARA Section 313 – Emission Reporting 1 % (acid aerosols including mists, vapors, gas, fog, and other airborne forms of any
particle size)
International regulations
No additional information available
US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
Hydrochloric acid (7647-01-0)
U.S. – New Jersey – Right to Know Hazardous Substance List
U.S. – Pennsylvania – RTK (Right to Know) – Environmental Hazard List
U.S. – Pennsylvania – RTK (Right to Know) List
SECTION 16: Other information
Date of issue : 09/10/2015
Revision date : 01/25/2019
Other information : None.
NFPA health hazard : 3
NFPA fire hazard : 0
NFPA reactivity : 1
PRO-SET SBE-460 Accelerator
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 7/7
HMIS III Rating
Health : 3 Serious Hazard
Flammability : 0 Minimal Hazard
Physical : 1 Slight Hazard
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained
in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user s responsibility to satisfy oneself as to the
suitability and completeness of this information for the user s own particular use.