by | Sep 27, 2025
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products
Regulations (HPR) WHMIS 2015
Date of issue: 12/05/2016 Revision date: 01/25/2019 Version: SBE-262-2019a
01/25/2019 EN (English) Page 1
SECTION 1: Identification
Identification
Product form : Mixture
Product name : PRO-SET SBE-262 Hardener
Product code : SBE-262, SBE-262-1, SBE-262-2, SBE-262-4, SBE-262-G
Relevant identified uses of the substance or mixture and uses advised against
Recommended use : Curing agent for epoxy resins
Details of the supplier of the safety data sheet
Manufacturer
Gougeon Brothers, Inc
100 Patterson Ave.
Bay City, MI 48706 – U.S.A.
T 866-937-8797 or 989-684-7286
www.westsystem.com
Emergency telephone number
Emergency number : CHEMTREC 1 (800) 424-9300
CHEMTREC International +1 (703) 527-3887 24 hr
SECTION 2: Hazard(s) identification
Classification of the substance or mixture
Acute Tox. 4 (Oral)
Skin Corr. 1B
Eye Dam. 1
Skin Sens. 1
Aquatic Acute 3
Aquatic Chronic 3
Label elements
Hazard pictograms (GHS) :
GHS05
GHS07
Signal word (GHS)
:
Danger
Hazard statements (GHS)
:
Harmful if swallowed. Causes severe skin burns and eye damage. May cause an allergic skin reaction. Harmful to aquatic life with long lasting
effects.
Precautionary statements (GHS)
:
Do not breathe dust/fume/gas/mist/vapours/spray. Wash hands, forearms and face thoroughly after handling. Do not eat, drink or smoke when
using this product. Contaminated work clothing must not be allowed out of the workplace. Avoid release to the environment. Wear protective
gloves/protective clothing/eye protection/face protection. If swallowed: rinse mouth. Do NOT induce vomiting. If on skin (or hair): Take off
immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get
medical advice/attention. If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Store locked up.
Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international
regulation.
Other hazards
No additional information available.
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 2/8
Unknown acute toxicity
No additional information available.
SECTION 3: Composition/information on ingredients
Substances
Not applicable
Mixtures
Name Product identifier HPR %
Trimethylhexamethylenediamine
(CAS-No.) 25620-58-0 10 – 30
Benzyl alcohol
(CAS-No.) 100-51-6 10 – 30
1,3-Cyclohexanedimethanamine
(CAS-No.) 2579-20-6 10 – 30
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane and 1,3-
cyclohexanedimethanamine
(CAS-No.) 60112-98-3 10 – 30
Diethylene glycol bis(3-aminopropyl) ether
(CAS-No.) 4246-51-9 1 – 5
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane, reaction products with
2,2,4(or 2,4,4)-trimethyl-1,6-hexanediamine
(CAS-No.) 111850-23-8 3 – 7
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate
(CAS-No.) 41556-26-7 0.1 – 1.5
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information (CBI). Any
ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may be present at a level
below its disclosure threshold.
SECTION 4: First aid measures
Description of first aid measures
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical advice/attention if you feel unwell.
First-aid measures after skin contact : IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with
water/shower. Wash contaminated clothing before reuse. Immediately call a POISON CENTER
or doctor/physician.
First-aid measures after eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to
do, remove contact lenses, if worn. Get medical attention immediately.
First-aid measures after ingestion : If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never
give anything by mouth to an unconscious person. Immediately call a POISON CENTER or
doctor/physician.
Most important symptoms and effects, both acute and delayed
Symptoms/effects after inhalation : May cause respiratory tract irritation.
Symptoms/effects after skin contact : Harmful in contact with skin. Causes severe burns. Symptoms may include redness, pain,
blisters. Repeated exposure to this material can result in absorption through skin causing
significant health hazard. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva. May cause burns.
Symptoms/effects after ingestion : Harmful if swallowed. May cause burns or irritation of the linings of the mouth, throat, and
gastrointestinal tract. May cause stomach distress, nausea or vomiting.
Indication of any immediate medical attention and special treatment needed
Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where
possible).
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media : Foam. Carbon dioxide. Dry chemical.
Unsuitable extinguishing media : Do not use a heavy water stream.
Special hazards arising from the substance or mixture
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon. Nitrogen oxides.
Amines. Ammonia. Nitric acid. Aldehydes. Nitrosamines. Phenolics. When mixed with sawdust,
wood chips, or other cellulosic material, spontaneous combustion can occur under certain
conditions. Heat is generated as the air oxidizes the amine. If the heat is not dissipated quickly
enough, it can ignite the sawdust.
Reactivity : No dangerous reactions known under normal conditions of use.
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 3/8
Advice for firefighters
Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory
protection (SCBA).
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
For non-emergency personnel
No additional information available
For emergency responders
No additional information available
Environmental precautions
No additional information available
Methods and material for containment and cleaning up
For containment : Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand, vermiculite),
then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use
appropriate Personal Protective Equipment (PPE). Do not absorb in sawdust, paper, cloth or
other combustible absorbents.
Methods for cleaning up : Scoop up material and place in a disposal container. Provide ventilation.
Reference to other sections
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal.
SECTION 7: Handling and storage
Precautions for safe handling
Precautions for safe handling : Do not get in eyes, on skin, or on clothing. Do not breathe dust/fume/gas/mist/vapours/spray.
Do not swallow. Handle and open container with care. Do not eat, drink or smoke when using
this product. Use personal protective equipment as required. When mixed with epoxy resin this
product causes an exothermic reaction, which in large masses, can produce enough heat to
damage or ignite surrounding materials and emit fumes and vapors that vary widely in
composition and toxicity.
Hygiene measures : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Contaminated work clothing should not be allowed out of the workplace.
Conditions for safe storage, including any incompatibilities
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in dry, cool, well-
ventilated area. Protect from moisture. Storage temperature: 40 F (4 C) – 90 F (32 C).
SECTION 8: Exposure controls/personal protection
Control parameters
Trimethylhexamethylenediamine (25620-58-0)
Not applicable
Benzyl alcohol (100-51-6)
AIHA WEEL TWA (ppm) 10 ppm
1,3-Cyclohexanedimethanamine (2579-20-6)
Not applicable
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane, reaction products with 2,2,4(or 2,4,4)-trimethyl-1,6-
hexanediamine (111850-23-8)
Not applicable
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate (41556-26-7)
ACGIH ACGIH Ceiling (mg/m ) 1 mg/m
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane and 1,3-cyclohexanedimethanamine (60112-98-3)
Not applicable
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 4/8
Diethylene glycol bis(3-aminopropyl) ether (4246-51-9)
Not applicable
Exposure controls
Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Hand protection : Wear chemically resistant protective gloves.
Eye protection : Wear approved eye protection (properly fitted dust- or splash-proof chemical safety goggles)
and face protection (face shield).
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Environmental exposure controls : Maintain levels below Community environmental protection thresholds.
Other information : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands
carefully before eating or smoking. Handle in accordance with good industrial hygiene and
safety procedures.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Physical state : Liquid
Appearance : No data available
Colour : Clear
Odour : Ammonia-like
Odour threshold : No data available
pH : 12.28
Melting point : No data available
Freezing point : No data available
Boiling point : > 400 F (204 C)
Flash point : > 200 F (93 C) Estimated based similar product.
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : No data available
Vapour pressure : No data available
Relative vapour density at 20 C : No data available
Relative density : 0.99
Solubility : No data available
Partition coefficient n-octanol/water : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : 108 mm /s @ 68 F (20 C)
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
Other information
VOC content : SBE-160 / SBE-262: 10.38 g/L (0.09 lbs/gal)
SBE-163 / SBE-262: 10.38 g/L (0.09 lbs/gal)
SBE-166 / SBE-262: 11.03 g/L (0.09 lbs/gal)
Bulk density : 825 lb/gal (0.99 kg/L)
SECTION 10: Stability and reactivity
Reactivity : No dangerous reactions known under normal conditions of use.
Chemical stability : Stable under normal conditions.
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 5/8
Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use. A mass of more than one pound
of product plus an epoxy resin will cause irreversible polymerization with significant heat
buildup and pressure.
Conditions to avoid : Heat. Incompatible materials.
Incompatible materials : Acids. Oxidizing materials. Halogenated compounds.
Hazardous decomposition products : May include, and are not limited to: oxides of carbon. Nitrogen oxides. Amines. Ammonia. Nitric
acid. Aldehydes. Nitrosamines. Phenolics.
SECTION 11: Toxicological information
Information on toxicological effects
Trimethylhexamethylenediamine (25620-58-0)
LD50 oral rat 910 mg/kg
Benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg
LC50 inhalation rat > 4.18 mg/l/4h
1,3-Cyclohexanedimethanamine (2579-20-6)
LD50 oral rat 700 – 780 mg/kg
LD50 dermal rabbit 1700 mg/kg
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane and 1,3-cyclohexanedimethanamine (60112-98-3)
LD50 oral rat 700 – 780 mg/kg
LD50 dermal rabbit 1700 mg/kg
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate (41556-26-7)
LD50 oral rat 2615 mg/kg
Diethylene glycol bis(3-aminopropyl) ether (4246-51-9)
LD50 oral rat 4290 mg/kg
Acute toxicity (oral) : Oral: Harmful if swallowed.
Acute toxicity (dermal) : Not classified.
Acute toxicity (inhalation) : Not classified.
Skin corrosion/irritation : Causes severe skin burns.
Serious eye damage/irritation : Causes serious eye damage.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified.
Carcinogenicity : Not classified.
Reproductive toxicity : Not classified.
STOT-single exposure : Not classified.
STOT-repeated exposure : Not classified.
Aspiration hazard : Not classified.
PRO-SET SBE-262 Hardener
Viscosity, kinematic (calculated value) (40 C) 108 mm /s @ 68 F (20 C)
Symptoms/effects after inhalation : May cause respiratory tract irritation.
Symptoms/effects after skin contact : Harmful in contact with skin. Causes severe burns. Symptoms may include redness, pain,
blisters. Repeated exposure to this material can result in absorption through skin causing
significant health hazard. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye damage. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva. May cause burns.
Symptoms/effects after ingestion : Harmful if swallowed. May cause burns or irritation of the linings of the mouth, throat, and
gastrointestinal tract. May cause stomach distress, nausea or vomiting.
Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.
SECTION 12: Ecological information
Toxicity
Ecology – general : Harmful to aquatic life with long lasting effects.
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 6/8
Benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (Exposure time: 96 h – Species: Pimephales promelas [static])
EC50 Daphnia 1 23 mg/l (Exposure time: 48 h – Species: water flea)
LC50 fish 2 10 mg/l (Exposure time: 96 h – Species: Lepomis macrochirus [static])
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate (41556-26-7)
LC50 fish 1 0.97 mg/l (Exposure time: 96 h – Species: Lepomis macrochirus [static])
Persistence and degradability
PRO-SET SBE-262 Hardener
Persistence and degradability Not established.
Bioaccumulative potential
PRO-SET SBE-262 Hardener
Bioaccumulative potential Not established.
Trimethylhexamethylenediamine (25620-58-0)
Partition coefficient n-octanol/water 0.77 (at 23 C)
Benzyl alcohol (100-51-6)
Partition coefficient n-octanol/water 1.1
Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate (41556-26-7)
Partition coefficient n-octanol/water 0.37 (at 25 C)
Mobility in soil
PRO-SET SBE-262 Hardener
Ecology – soil No additional information available.
Other adverse effects
Effect on the global warming : No known effects from this product.
Name CAS# Ecotoxicity Classification Information
Trimethylhexane-1,6-diamine 25620-58-0 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Benzyl alcohol 100-51-6 Not classified
1,3-cyclohexanedimethanamine 2579-20-6 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Phenol, 4,4′-(1-methylethylidene) bis-, polymer with 2-
(chromethyl) oxirane and 1,3-cyclohexanedimethanamine
60112-98-3 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Polymer of epichlorohydrin, bisphenol A, and
trimethylhexane-1,6-diamine
111850-23-8 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
3,3′-(Oxybis(2,1-ethane-diyloxy))bis-1-propanamine 4246-51-9 No data available
Decanedioic acid, 1, 10-bis(1,2,2,6,6-pentamethyl-4-
piperidinyl) ester
41556-26-7 No data available
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
Waste treatment methods
Product/Packaging disposal
recommendations
: This material must be disposed of in accordance with all local, state, provincial, and federal
regulations. The generation of waste should be avoided or minimized wherever possible.
SECTION 14: Transport information
Department of Transportation (DOT) and Transportation of Dangerous Goods (TDG)
In accordance with DOT/TDG
UN-No.(DOT/TDG) : UN2735
Proper Shipping Name (DOT/TDG) : Polyamines, liquid, corrosive, n.o.s. (1,3-cyclohexanedimethanamine)
Class (DOT/TDG) : 8
Packing group (DOT/TDG) : III
Marine Pollutant No
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 7/8
Transport by sea
In accordance with IMDG
UN-No. (IMDG) : 2735
Proper Shipping Name (IMDG) : POLYAMINES, LIQUID, CORROSIVE, N.O.S. (1,3-cyclohexanedimethanamine)
Class (IMDG) : 8
EmS Number : F-A, S-B
Packing group (IMDG) : III
Marine Pollutant No
Transport by air
In accordance with IATA
UN-No. (IATA) : 2735
Proper Shipping Name (IATA) : Polyamines, liquid, corrosive, n.o.s. (1,3-cyclohexanedimethanamine)
Class (IATA) : 8
Packing group (IATA) : III
Marine Pollutant No
SECTION 15: Regulatory information
Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic
Substances List) inventories.
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane, reaction products with 2,2,4(or 2,4,4)-trimethyl-1,6-
hexanediamine (111850-23-8)
EPA TSCA Regulatory Flag N – N – indicates a polymeric substance containing no free-radical initiator in its Inventory
name but is considered to cover the designated polymer made with any free-radical initiator
regardless of the amount used.
XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with (chloromethyl)oxirane and 1,3-cyclohexanedimethanamine (60112-98-3)
EPA TSCA Regulatory Flag P – P – indicates a commenced PMN substance.
XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
International regulations
No additional information available
US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
Trimethylhexamethylenediamine (25620-58-0)
U.S. – New Jersey – Right to Know Hazardous Substance List
Benzyl alcohol (100-51-6)
U.S. – Pennsylvania – RTK (Right to Know) List
SECTION 16: Other information
Date of issue : 12/05/2016
Revision date : 01/25/2019
Other information : None.
PRO-SET SBE-262 Hardener
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 8/8
NFPA health hazard : 3
NFPA fire hazard : 1
NFPA reactivity : 0
Hazard Rating
Health : 3 Serious Hazard
Flammability : 1 Slight Hazard
Physical : 0 Minimal Hazard
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained
in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user s responsibility to satisfy oneself as to the
suitability and completeness of this information for the user s own particular use.
by | Sep 27, 2025
SAFETY DATA SHEET
Last Revised: 03JAN22
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: ……………………………………… PRO-SET
SBE-262 Hardener
APPLICABLE PRODUCT CODES: ………………. SBE-262, SBE-262-1, SBE-262-2, SBE-262-4, SBE-262-G
CHEMICAL FAMILY: ………………………………….. Polyamine mixture.
INTENDED PRODUCT USES: ……………………… Curing agent for epoxy resins.
PRODUCT RESTRICTIONS: ……………………….. None identified.
SDS VERSION: …………………………………………. SBE-262-2022a
MANUFACTURER: EMERGENCY TELEPHONE NUMBERS (24 HRS):
Gougeon Brothers, Inc. Transportation
100 Patterson Ave. CHEMTREC: ……………….. 800-424-9300 (U.S.)
Bay City, MI 48706, U.S.A. 703-527-3887 (International)
Phone: 888-377-6738 or 989-684-7286 Non-transportation
www.prosetepoxy.com Poison Hotline: …………….. 800-222-1222
2. HAZARDS IDENTIFICATION
Classification of Substance or Mixture
Acute Toxicity, Oral, Category 4
Skin corrosion/irritation, Category 1B
Skin sensitizer, Category 1
Eye damage/irritation, Category 1
Acute aquatic toxicity, Category 3
Chronic aquatic toxicity, Category 3
Label Elements
Hazard Pictogram(s):
Signal Word:
DANGER
Hazard Statements:
H302 Harmful if swallowed
H314 Causes severe skin burns and eye damage
H317 May cause an allergic skin reaction
H412 Harmful to aquatic life with long lasting effects
Precautionary Statements:
Prevention
P260 Do not breathe dust/fume/mist/gas/vapors/spray
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product
P272 Contaminated work clothing should not be allowed out of the workplace
P273 Avoid release to the environment
P280 Wear protective gloves/protective clothing/eye protection/face protection
Response
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse or wash skin with soap and water (or
shower).
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
P310 Immediately call POISON CONTROL CENTER or doctor
P313 + P333 If skin irritation or rash occurs: Get medical attention/advice
P362 + P364 Take off contaminated clothing and wash it before reuse
Storage
P405 Store locked up.
Disposal
P501 Dispose of contents and container according to local, state, national and International regulations
Other Hazards
None known.
PRO-SET
SBE-262 Hardener
Page 2 of 6 Last Revised: 03JAN22
3. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS
INGREDIENT NAME CAS # CONCENTRATION (%)
Trimethylhexane-1,6-diamine 25620-58-0 10-30
Benzyl alcohol 100-51-6 10-30
1,3-cyclohexanedimethanamine 2579-20-6 10-30
Phenol, 4,4′-(1-methylethylidene) bis-, polymer with 2-(chromethyl) oxirane and
1,3-cyclohexanedimethanamine
60112-98-3
10-30
Polymer of epichlorohydrin, bisphenol A, and trimethylhexane-1,6-diamine 111850-23-8 3-7
3,3′-(Oxybis(2,1-ethane-diyloxy))bis-1-propanamine 4246-51-9 1-5
Decanedioic acid, 1, 10-bis(1,2,2,6,6-pentamethyl-4-piperidinyl) ester 41556-26-7 0.1-1.5
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information
(CBI). Any ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may
be present at a level below its disclosure threshold.
4. FIRST AID MEASURES
FIRST AID FOR EYES ……………………………………………………………… SYMPTOMS: Causes eye burns and eye damage. RESPONSE: Flush
immediately with water for at least 15 minutes. Remove contact lenses if present and easy to do. Immediately call a POISON CONTROL CENTER
or doctor.
FIRST AID FOR SKIN ………………………………………………………………. SYMPTOMS: Causes skin burns, redness and irritation. May cause allergic
skin reaction and sensitization. RESPONSE: Immediately wash skin with soap and water. Immediately call a POISON CONTROL CENTER or
doctor.
FIRST AID FOR INHALATION…………………………………………………… SYMPTOMS: Can cause respiratory irritation, shortness of breath or cough.
RESPONSE: Remove to fresh air if effects occur and keep comfortable for breathing. Immediately call POISON CONTROL CENTER or doctor.
FIRST AID FOR INGESTION …………………………………………………….. SYMPTOMS: May cause gastrointestinal irritation or ulceration. May
cause burns of the mouth and throat. RESPONSE: Rinse mouth with water. DO NOT induce vomiting. If vomiting should occur, keep airway
clear. Immediately call POISON CONTROL CENTER or doctor.
Notes to physician: Use of gastric lavage or emesis is contraindicated. Possible perforation of stomach or esophagus should be investigated. Do
not give chemical antidotes. Asphyxia from glottal edema may occur. Marked decrease in blood pressure may occur with moist rales, frothy
sputum, and high pulse pressure. Treat symptomatically.
5. FIRE FIGHTING MEASURES
EXTINGUISHING MEDIA: ………………………………………………………… SUITABLE: Foam, carbon dioxide (CO2), dry chemical. NON-SUITABLE:
Direct water stream.
FIRE AND EXPLOSION HAZARDS: ………………………………………….. During a fire, smoke may contain the original materials in addition to
combustion products of varying composition which may be toxic and/or irritating. Combustion products may include, but are not limited to: oxides
of nitrogen, carbon monoxide, carbon dioxide, volatile amines, ammonia, nitric acid, aldehydes, nitrosamines, phenolics. When mixed with
sawdust, wood chips, or other cellulosic material, spontaneous combustion can occur under certain conditions. Heat is generated as the air
oxidizes the amine. If the heat is not dissipated quickly enough, it can ignite the sawdust.
SPECIAL FIRE FIGHTING PROCEDURES: ………………………………… Use full-body protective gear and a self-contained breathing apparatus.
Use of water may generate toxic aqueous solutions. Do not allow water run-off from fighting fire to enter drains or other water courses.
6. ACCIDENTAL RELEASE MEASURES
EMERGENCY MEASURES : ……………………………………………………… Keep unnecessary and unprotected personnel from entering area. Use
appropriate safety and personal protective equipment as indicated in Section 8.
MITIGATION AND CLEAN UP PROCEDURES: …………………………… Stop leak without additional risk. Isolate area. Dike and absorb with inert
material (e.g., sand) and collect in a suitable, closed container. Do not use sawdust, wood chips or other cellulosic materials to absorb the spill, as
the possibility for spontaneous combustion exists. Warm, soapy water may be used to clean residual.
ENVIRONMENTAL PRECAUTIONS:………………………………………….. Prevent from entering into soil, ditches, sewers, waterways and
groundwater. See Section 12 for environmental impact information.
7. HANDLING AND STORAGE
STORAGE TEMPERATURE (min./max.): …………………………………… 40 F (4 C) / 90 F (32 C).
PRO-SET
SBE-262 Hardener
Page 3 of 6 Last Revised: 03JAN22
STORAGE: …………………………………………………………………………….. Store in cool, dry place away from high temperatures and moisture. Keep
container tightly closed. Store in a secure location with restricted access or store locked up.
HANDLING PRECAUTIONS: ……………………………………………………. Use with adequate ventilation. Do not breathe vapors or mists from heated
material. Avoid exposure to concentrated vapors. Avoid skin contact and eye contact. Wash hands thoroughly after handling. When mixed with
epoxy resin this product causes an exothermic reaction, which in large masses, can produce enough heat to damage or ignite surrounding
materials and emit fumes and vapors that vary widely in composition and toxicity.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS: ……………………………………………………. Use with adequate general ventilation and/or local ventilation to keep
exposures below established limits.
EYE PROTECTION GUIDELINES: …………………………………………….. Chemical splash-proof goggles or face shield.
SKIN PROTECTION GUIDELINES: ……………………………………………. Wear liquid-proof, chemical resistant gloves (nitrile-butyl rubber, neoprene,
butyl rubber or natural rubber) and full body-covering clothing.
RESPIRATORY PROTECTION GUIDELINES: …………………………….. When ventilation cannot be made adequate enough to keep exposures
below established limits, use a NIOSH approved respirator with organic vapor, organic vapor + P100, or multi-contaminant cartridge, depending on
specific workplace conditions. Consult with your respirator and cartridge supplier to ensure proper selection of respirator and cartridge based on
ingredients listed in Section 3 and specific workplace conditions. Use and select a respirator according the guidelines established in OSHA
1910.134 or other applicable respiratory protection standard.
ADDITIONAL PROTECTIVE MEASURES: ………………………………….. Use where there is immediate access to safety shower and emergency eye
wash. Wash thoroughly after use. Contact lens should not be worn when working with this material. Generally speaking, working cleanly and
following basic precautionary measures will greatly minimize the potential for harmful exposure to this product under normal use conditions.
OCCUPATIONAL EXPOSURE LIMITS: ……………………………………… Exposure limits may not be established for this product as a whole. For
established exposure limits of specific ingredients in this product, or other available exposure limit information, refer to the table below.
Ingredient Name CAS# Exposure Limit Information
Trimethylhexane-1,6-diamine 25620-58-0 No data available
Benzyl alcohol 100-51-6 10 ppm (AIHA-WEEL)
1,3-cyclohexanedimethanamine 2579-20-6 No data available
Phenol, 4,4′-(1-methylethylidene) bis-,
polymer with 2-(chromethyl) oxirane and 1,3-
cyclohexanedimethanamine
60112-98-3
No data available
Polymer of epichlorohydrin, bisphenol A, and
trimethylhexane-1,6-diamine
111850-23-8
No data available
Decanedioic acid, 1, 10-bis(1,2,2,6,6-
pentamethyl-4-piperidinyl) ester
41556-26-7
1mg/m
3
CELING
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL FORM: ………………………………………………………………….. Liquid.
COLOR: ………………………………………………………………………………… Clear
ODOR: …………………………………………………………………………………… Ammonia-like
ODOR THRESHOLD: ………………………………………………………………. No data available
pH …………………………………………………………………………………………. 12.28
MELTING POINT / FREEZING POINT ………………………………………… No data.
BOILING POINT (760mm/Hg): ………………………………………………….. > 400 F (204 C)
FLASH POINT: ……………………………………………………………………….. Estimated > 200
F (93 C) estimated based similar product.
AUTO IGNITION TEMPERATURE ……………………………………………… No data.
LOWER EXPLOSIVE LIMIT (LEL) ……………………………………………… No data.
UPPER EXPLOSIVE LIMIT (UEL) ……………………………………………… No data.
VAPOR PRESSURE ………………………………………………………………… No data.
SPECIFIC GRAVITY/DENSITY (water = 1)………………………………….. 0.99
BULK DENSITY………………………………………………………………………. 8.25 lbs./gal. (0.99 kg/L)
VAPOR DENSITY (air = 1) ……………………………………………………….. No data.
EVAPORATIOIN RATE (Butyl Acetate = 1) ………………………………… No data.
WATER SOLUBILITY (% BY WT.) …………………………………………….. No data.
PARTITION COEFFICIENT, n-OCTANOL/WATER (log Pow) ………… No data.
KINEMATIC VISCOSITY: …………………………………………………………. 108 (mm
2
/s @ 20
C)
DECOMPOSITION TEMPERATURE : …………………………………………. No data available.
% VOLATILE BY WEIGHT: ………………………………………………………. ASTM 2369-07 was used to determine the Volatile Matter Content of mixed
epoxy resin and hardener. The combined VOC content for the resin and hardener system is listed below.
VOC Content
Resin/Hardener (g/L) (lbs/gal)
SBE-160 / SBE-262 ………………………………………………………….. 10.38 0.09
SBE-163 / SBE-262 ………………………………………………………….. 10.38 0.09
SBE-166 / SBE-262 ………………………………………………………….. 11.03 0.09
PRO-SET
SBE-262 Hardener
Page 4 of 6 Last Revised: 03JAN22
10. STABILITY AND REACTIVITY
STABILITY: ……………………………………………………………………………. Product is stable at normal temperatures and pressures.
REACTIVITY/HAZARDOUS REACTIONS: ………………………………….. Product will not react by itself. A mass of more than one pound of product
mixed with an epoxy resin will cause irreversible polymerization with significant heat buildup. Strong acids, bases, amines and mercaptans can
cause polymerization.
INCOMPATIBILITIES: ……………………………………………………………… Avoid acids, oxidizing materials, halogenated organic compounds (e.g.,
methylene chloride). External heating or self-heating could result in rapid temperature increase and pressure build up. If such a condition were to
occur in a drum, the drum could expand and rupture violently.
CONDITIONS TO AVOID: ………………………………………………………… Avoid excessive heat.
DECOMPOSITION PRODUCTS: ……………………………………………….. Very toxic fumes and gases when burned or otherwise heated to
decomposition. Decomposition products may include, but not limited to: oxides of nitrogen, volatile amines, ammonia, nitric acid, nitrosamines,
phenolics.
11. TOXICOLOGICAL INFORMATION
Ingredient Name CAS# LD50 Oral LD50 Dermal LC50 Inhalation
Trimethylhexane-1,6-diamine 25620-58-0 910 mg/kg No data No data
Benzyl alcohol 100-51-6 1620 mg/kg No data >4.18 mg/l
4 h aerosol
1,3-cyclohexanedimethanamine 2579-20-6 700-780 mg/kg 1700 mg/kg No data
Phenol, 4,4′-(1-methylethylidene) bis-,
polymer with 2-(chromethyl) oxirane and
1,3-cyclohexanedimethanamine
60112-98-3
Refer to 1,3-cyclohexanedimethanamine for this data.
Polymer of epichlorohydrin, bisphenol A,
and trimethylhexane-1,6-diamine
111850-23-8
No data
No data
No data
Decanedioic acid, 1, 10-bis(1,2,2,6,6-
pentamethyl-4-piperidinyl) ester
41556-26-7
No data
No data
No data
ACUTE TOXICITY: …………………………………………………………… No specific toxicity data exists for this mixture. Classification is
based on acute toxicity estimation methods using ingredient data.
Oral: ……………………………………………………………………….. Category 4 – Harmful if swallowed. May result in gastrointestinal
tract irritation, pain and possible burns.
Dermal: …………………………………………………………………… Not classified. Based on available data does not meet
classification criteria.
Inhalation:………………………………………………………………… Not classified. Based on available data does not meet
classification criteria.
SKIN CORROSION / IRRITATION: …………………………………….. Category 1A – Causes severe skin burns. Effects may be
immediate.
SERIOUS EYE DAMAGE / IRRITATION: …………………………….. Category 1 – Causes serious eye damage.
RESPIRATORY SENSITIZATION : ……………………………………… Not classified. Based on available data does not meet
classification criteria.
SKIN SENSITZIATION: …………………………………………………….. Category 1 – May cause allergic skin reaction.
REPRODUCTIVE TOXICITY: …………………………………………….. Not classified. Based on available data does not meet classification criteria.
MUTAGENICITY: …………………………………………………………….. Not classified. Based on available data does not meet classification criteria.
CARCINOGENICITY: ……………………………………………………….. Not classified. Based on available data does not meet classification criteria.
SPECIFIC TARGET ORGAN TOXICITY (Single Exposure): ….. Not classified. Based on available data does not meet classification criteria.
SPECIFIC TARGET ORGAN TOXICITY (Repeated Exposure): Not classified. Based on available data does not meet classification criteria.
ASPIRATION HAZARD : ……………………………………………………. Not classified. Based on available data does not meet classification criteria.
OTHER HEALTH HAZARD INFORMATION : ………………………… This product is corrosive to skin and mucous membrane tissues. As a result
of this identified hazard, it is anticipated that excessive inhalation of vapors/aerosol/mist may also be corrosive to the respiratory system.
12. ECOLOGICAL INFORMATION
ACUTE AQUATIC TOXICITY : ……………………………………………. No specific test data available for the mixture. Calculated
Estimate: Aquatic Acute Category 3. Harmful to aquatic life. Avoid release to the environment.
PRO-SET
SBE-262 Hardener
Page 5 of 6 Last Revised: 03JAN22
CHRONIC AQUATIC TOXICITY : ………………………………………… No specific test data available for the mixture. Calculated
Estimate: Aquatic Chronic Category 3. Harmful to aquatic life with long lasting effects. Avoid release to the environment.
PERSISTANCE AND BIODEGRADABILITY : ……………………….. No specific test data available for the mixture.
MOBILITY IN SOIL: ………………………………………………………….. No specific test data available for the mixture.
ADDITIONAL ECOTOXICITY INFORMATION :……………………… In the liquid, uncured state, this product may be harmful to
aquatic life with long lasting effects. Prevent release to the environment, sewers and natural waters.
Ingredient CAS# Ecotoxicity Classification Information
Trimethylhexane-1,6-diamine 25620-58-0 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Benzyl alcohol 100-51-6 Not classified
1,3-cyclohexanedimethanamine 2579-20-6 Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Phenol, 4,4′-(1-methylethylidene) bis-,
polymer with 2-(chromethyl) oxirane and 1,3-
cyclohexanedimethanamine
60112-98-3
Refer to 1,3-cyclohexanedimethanamine for this data.
Polymer of epichlorohydrin, bisphenol A, and
trimethylhexane-1,6-diamine
111850-23-8
Acute Aquatic Cat. 3; Chronic Aquatic Cat. 3
Decanedioic acid, 1, 10-bis(1,2,2,6,6-
pentamethyl-4-piperidinyl) ester
41556-26-7
Acute Aquatic Cat. 1; Chronic Aquatic Cat. 1
13. DISPOSAL CONSIDERATIONS
WASTE DISPOSAL METHOD: ………………………………………………….. Evaluation of this product using RCRA criteria shows that it is not a
hazardous waste, either by listing or characteristics, in its purchased form. It is the responsibility of the user to determine proper disposal
methods.
Incinerate, recycle (fuel blending) or reclaim may be preferred methods when conducted in accordance with federal, state and local regulations.
14. TRANSPORTATION IN FORMATION
US DOT
UN NUMBER: …………………………………………………………………………. UN 2735
SHIPPING NAME: ……………………………………………………………………. Polyamines, liquid, corrosive, n.o.s.
TECHNICAL SHIPPING NAME: …………………………………………………. 1,3-cyclohexanedimethanamine
HAZARD CLASS: …………………………………………………………………….. Class 8
PACKING GROUP: ………………………………………………………………….. PG III
MARINE POLLUTANT: …………………………………………………………….. No
CANADA TDG
UN NUMBER: …………………………………………………………………………. UN 2735
SHIPPING NAME: ……………………………………………………………………. Polyamines, liquid, corrosive, n.o.s.
TECHNICAL SHIPPING NAME: …………………………………………………. 1,3-cyclohexanedimethanamine
HAZARD CLASS: …………………………………………………………………….. Class 8
PACKING GROUP: ………………………………………………………………….. PG III
MARINE POLLUTANT: …………………………………………………………….. No
IMDG
UN NUMBER: …………………………………………………………………………. UN 2735
SHIPPING NAME: ……………………………………………………………………. Polyamines, liquid, corrosive, n.o.s.
TECHNICAL SHIPPING NAM E: …………………………………………………. 1,3-cyclohexanedimethanamine
HAZARD CLASS: …………………………………………………………………….. Class 8
PACKING GROUP: ………………………………………………………………….. PG III
EmS Number: ………………………………………………………………………… F-A, S-B
MARINE POLLUTANT ……………………………………………………………… No
ICAO/IATA
UN NUMBER: …………………………………………………………………………. UN 2735
SHIPPING NAME: ……………………………………………………………………. Polyamines, liquid, corrosive, n.o.s.
TECHNICAL SHIPPING NAME: …………………………………………………. 1,3-cyclohexanedimethanamine
HAZARD CLASS: …………………………………………………………………….. Class 8
PACKING GROUP: ………………………………………………………………….. PG III
MARINE POLLUTANT: …………………………………………………………….. No
15. REGULATORY INFORMATION
COUNTRY INVENTORY LIST STATUS
United States TSCA All ingredients are listed or otherwise compliant.
Europe EINECS (or REACH) No data available on CAS# 60112-98-3. All other ingredients are listed or
otherwise compliant.
Canada CEPA (DSL/NDSL) CAS# 60112-98-3 listed on NDSL only. All other ingredients are listed or
PRO-SET
SBE-262 Hardener
Page 6 of 6 Last Revised: 03JAN22
otherwise compliant.
Australia AICS No data available on CAS# 60112-98-3. All other ingredients are listed or
otherwise compliant.
Japan ENCS No data available on CAS# 60112-98-3. All other ingredients are listed or
otherwise compliant.
South Korea KECI No data available on CAS# 60112-98-3. All other ingredients are listed or
otherwise compliant.
China IECSC All ingredients are listed or otherwise compliant.
Philippines PICCS No data available on CAS# 60112-98-3. All other ingredients are listed or
otherwise compliant.
US EPA TSCA Specific Requirements: …………………………………….. No data available.
Canada WHMIS Confidential Business Information (CBI): ………….. No data available.
US EPA SARA TITLE III Reporting and Notification Requirements:
Subject to Section 302 (TPQ) ……………………………………………… No data available.
Subject to Section 304 (RQ) ……………………………………………….. No data available.
Subject to Section 311 or 312 …………………………………………….. Refer to the health and physical classifications in section 2..
Subject to Section 313 ………………………………………………………. No data available.
US STATE REGULATORY INFORMATION:
The following chemicals may be specifically regulated by individual states. For details on state regulatory requirements you should contact the
appropriate state agency.
COMPONENT NAME
/CAS NUMBER STATE CODE
Benzyl alcohol
100-51-6 MA, PA, NJ
1,3-cyclohexanedimethanamine
2579-20-6 PA, NJ
16. OTHER INFORMATION
REASON FOR ISSUE:……………………………………………………………… Updates to Section 15.
PREPARED BY: ……………………………………………………………………… Gougeon Brothers, Inc.
SDS CONTACT: ……………………………………………………………………… safety@gougeon.com
TITLE: …………………………………………………………………………………… Health, Safety & Environmental Manager
APPROVAL DATE: …………………………………………………………………. January 3, 2022
SUPERSEDES DATE: ……………………………………………………………… January 15, 2019
SDS VERSION: ………………………………………………………………………. SBE-262-2022a
OTHER HAZARD INFORMATION AND RATING SYSTEMS:
HMIS RATING NFPA 704 CODES
HEALTH: 3
FLAMMABILITY: 1
PHYSICAL HAZARD: 0
PERSONAL PROTECTION:
Approximate HMIS and NFPA Risk Ratings Legend:
0 = Low or None; 1 = Slight; 2 = Moderate; 3 = Serious; 4 = Severe
Information in this document is furnished without warranty, expressed or implied, except that it is accurate to the best knowledge of Gougeon Brothers,
Inc. The data on this sheet is related only to the specific material designated herein. Gougeon Brothers, Inc. assumes no legal responsibility for use or
reliance upon these data.
3 0
1
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products
Regulations (HPR) WHMIS 2015
Date of issue: 09/10/2015 Revision date: 01/25/2019 Version: SBE-160-2019a
01/25/2019 EN (English) Page 1
SECTION 1: Identification
Identification
Product form : Mixtures
Product name : PRO-SET SBE-160 Resin
Product code : SBE-160, SBE-160-1, SBE-160-2, SBE-160-4
Relevant identified uses of the substance or mixture and uses advised against
Recommended use : Resin for composites
Details of the supplier of the safety data sheet
Manufacturer
Gougeon Brothers, Inc
100 Patterson Ave.
Bay City, MI 48706 – U.S.A.
T 866-937-8797 or 989-684-7286
www.westsystem.com
Emergency telephone number
Emergency number : CHEMTREC 1 (800) 424-9300
CHEMTREC International +1 (703) 527-3887 24 hr
SECTION 2: Hazard(s) identification
Classification of the substance or mixture
Skin Irrit. 2
Eye Irrit. 2A
Skin Sens. 1
Aquatic Chronic 2
Label elements
Hazard pictograms (GHS) :
GHS07
GHS09
Signal word (GHS)
:
Warning
Hazard statements (GHS)
:
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects
Precautionary statements (GHS)
:
Avoid breathing dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after handling. Contaminated work clothing must not be allowed out of
the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If on skin: Wash with
plenty of water. If skin irritation or rash occurs: Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing
and wash it before reuse. Collect spillage. Dispose of contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation
Other hazards
No additional information available.
Unknown acute toxicity
No additional information available.
SECTION 3: Composition/information on ingredients
Substance
Not applicable
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 2/7
Mixtures
Name Product identifier HPR %
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer
(CAS No) 25085-99-8 60 – 80
Phenol, polymer with formaldehyde, glycidyl ether
(CAS No) 28064-14-4 10 – 30
Benzyl alcohol
(CAS No) 100-51-6 1 – 5
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester
(CAS No) 57834-33-0 1 – 5
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information (CBI). Any
ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may be present at a level
below its disclosure threshold.
SECTION 4: First aid measures
Description of first aid measures
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical advice/attention if you feel unwell.
First-aid measures after skin contact : In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get
medical advice/attention.
First-aid measures after eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to
do, remove contact lenses, if worn. If irritation persists, get medical attention.
First-aid measures after ingestion : If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Causes skin irritation. Symptoms may include redness, edema, drying, defatting and cracking
of the skin. May cause an allergic skin reaction.
Symptoms/injuries after eye contact : Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva.
Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Indication of any immediate medical attention and special treatment needed
Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where
possible).
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media : Foam. Carbon dioxide. Dry chemical.
Unsuitable extinguishing media : Do not use a heavy water stream.
Special hazards arising from the substance or mixture
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, phenolics.
Reactivity : No dangerous reaction known under conditions of normal use.
Advice for firefighters
Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory
protection (SCBA).
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
For non-emergency personnel
No additional information available
For emergency responders
No additional information available
Environmental precautions
Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 3/7
Methods and material for containment and cleaning up
For containment : Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand, vermiculite),
then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use
appropriate Personal Protective Equipment (PPE).
Methods for cleaning up : Scoop up material and place in a disposal container. Provide ventilation.
Reference to other sections
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal.
SECTION 7: Handling and storage
Precautions for safe handling
Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not
swallow. Handle and open container with care. When using do not eat, drink or smoke. When
mixed with epoxy curing agents this product causes an exothermic reaction, which in large
masses, can produce enough heat to damage or ignite surrounding materials and emit fumes
and vapors that vary widely in composition and toxicity.
Hygiene measures : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Contaminated work clothing should not be allowed out of the workplace.
Conditions for safe storage, including any incompatibilities
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in dry, cool, well-
ventilated area. Protect from moisture. Storage temperature : 40 F (4 C) – 120 F (49 C).
SECTION 8: Exposure controls/personal protection
Control parameters
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
Not applicable
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
Not applicable
Benzyl alcohol (100-51-6)
AIHA WEEL TWA (ppm) 10 ppm
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester (57834-33-0)
Not applicable
Exposure controls
Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Hand protection : Wear chemically resistant protective gloves.
Eye protection : Wear eye/face protection.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Environmental exposure controls : Maintain levels below Community environmental protection thresholds.
Other information : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands
carefully before eating or smoking. Handle according to established industrial hygiene and
safety practices.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Physical state : Liquid
Appearance : No data available
Colour : Colourless
Odour : Mild
Odour threshold : No data available
pH : No data available
Melting point : No data available
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 4/7
Freezing point : No data available
Boiling point : > 400 F (204 C) Estimated based on ingredient data.
Flash point : > 200 F (93 C) Estimated based on ingredient data.
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Non flammable.
Vapour pressure : No data available
Relative vapour density at 20 C : Heavier than air. (Estimated based on ingredient data.)
Relative density : 1.17
Solubility : No data available
Partition coefficient n-octanol/water : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
Other information
Bulk density : 9.7 lb/gal (1.17 kg/L)
SECTION 10: Stability and reactivity
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : Stable under normal storage conditions.
Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use. A mass of more than one pound
of product plus an aliphatic amine will cause irreversible polymerization with significant heat
buildup. Strong acids, bases, amines and mercaptans can cause polymerization.
Conditions to avoid : Heat. Incompatible materials.
Incompatible materials : Strong acids. Bases. Amines. Mercaptans.
Hazardous decomposition products : May include, and are not limited to: oxides of carbon, phenolics.
SECTION 11: Toxicological information
Information on toxicological effects
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
LD50 oral rat > 15000 mg/kg
LD50 dermal rabbit > 23000 mg/kg
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
LD50 oral rat > 2000 mg/kg
LD50 dermal rat 2000 mg/kg
Benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg
LC50 inhalation rat > 4.18 mg/l/4h
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester (57834-33-0)
LD50 oral rat 1000 – 2000 mg/kg
Acute toxicity (oral) : Not classified.
Acute toxicity (dermal) : Not classified.
Acute toxicity (inhalation) : Not classified.
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified.
Carcinogenicity : Not classified.
Reproductive toxicity : Not classified.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 5/7
Specific target organ toxicity (single
exposure)
: Not classified.
Specific target organ toxicity (repeated
exposure)
: Not classified.
Aspiration hazard : Not classified.
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Causes skin irritation. Symptoms may include redness, edema, drying, defatting and cracking
of the skin. May cause an allergic skin reaction.
Symptoms/injuries after eye contact : Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva.
Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.
SECTION 12: Ecological information
Toxicity
Ecology – general : Toxic to aquatic life with long lasting effects.
Benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (Exposure time: 96 h – Species: Pimephales promelas [static])
EC50 Daphnia 1 23 mg/l (Exposure time: 48 h – Species: water flea)
LC50 fish 2 10 mg/l (Exposure time: 96 h – Species: Lepomis macrochirus [static])
Persistence and degradability
PRO-SET SBE-160 Resin
Persistence and degradability Not established.
Bioaccumulative potential
PRO-SET SBE-160 Resin
Bioaccumulative potential Not established.
Benzyl alcohol (100-51-6)
Partition coefficient n-octanol/water 1.1
Mobility in soil
PRO-SET SBE-160 Resin
Ecology – soil No additional information available.
Other adverse effects
Effect on the global warming : No known effects from this product.
Name CAS# Ecotoxicity Classification Information
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer
25085-99-8 Aquatic Chronic Cat. 2
Phenol, polymer with formaldehyde, glycidyl ether
28064-14-4 Aquatic Chronic Cat. 2
Benzyl alcohol
100-51-6 Not Classified
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester 57834-33-0 Not Classified
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
Waste treatment methods
Product/Packaging disposal
recommendations
: Avoid release to the environment. This material must be disposed of in accordance with all
local, state, provincial, and federal regulations. The generation of waste should be avoided or
minimized wherever possible.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 6/7
SECTION 14: Transport information
Department of Transportation (DOT) and Transportation of Dangerous Goods (TDG)
In accordance with DOT/TDG
Not regulated
Transport by sea
In accordance with IMDG
UN-No. (IMDG) : 3082
Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZA RDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxy resin)
Class (IMDG) : 9
Packing group (IMDG) : III
EmS Number : F-A, S-F
Marine pollutant : Yes
Transport by air
In accordance with IATA
UN-No. (IATA) : 3082
Proper Shipping Name (IATA) : Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
Class (IATA) : 9
Packing group (IATA) : III
Marine pollutant : Yes
SECTION 15: Regulatory information
Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic
Substances List) inventories.
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
EPA TSCA Regulatory Flag XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
EPA TSCA Regulatory Flag XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
Epichlorohydrin (106-89-8)
Listed on the United States SARA Section 302
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 100 lb
SARA Section 302 Threshold Planning
Quantity (TPQ)
1000 lb
SARA Section 313 – Emission Reporting 0.1 %
International regulations
No additional information available
US State regulations
California Proposition 65 – This product contains, or may contain, trace quantities of a substance(s) known to the state of California to cause
cancer, developmental and/or reproductive harm
Epichlorohydrin (106-89-8)
U.S. – California –
Proposition 65 –
Carcinogens List
U.S. – California –
Proposition 65 –
Developmental Toxicity
U.S. – California –
Proposition 65 –
Reproductive Toxicity –
Female
U.S. – California –
Proposition 65 –
Reproductive Toxicity –
Male
No significant risk
level (NSRL)
Yes No No Yes 9 g/day
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 7/7
Benzyl alcohol (100-51-6)
U.S. – Pennsylvania – RTK (Right to Know) List
Epichlorohydrin (106-89-8)
U.S. – New Jersey – Right to Know Hazardous Substance List
U.S. – Pennsylvania – RTK (Right to Know) – Environmental Hazard List
U.S. – Pennsylvania – RTK (Right to Know) – Special Hazardous Substances
U.S. – Pennsylvania – RTK (Right to Know) List
SECTION 16: Other information
Date of issue : 09/10/2015
Revision date : 01/25/2019
Other information : None.
NFPA health hazard : 2
NFPA fire hazard : 1
NFPA reactivity : 1
HMIS III Rating
Health : 2 Moderate Hazard
Flammability : 1 Slight Hazard
Physical : 1 Slight Hazard
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained
in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user s responsibility to satisfy oneself as to the
suitability and completeness of this information for the user s own particular use.
by | Sep 27, 2025
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products
Regulations (HPR) WHMIS 2015
Date of issue: 09/10/2015 Revision date: 01/25/2019 Version: SBE-160-2019a
01/25/2019 EN (English) Page 1
SECTION 1: Identification
Identification
Product form : Mixtures
Product name : PRO-SET SBE-160 Resin
Product code : SBE-160, SBE-160-1, SBE-160-2, SBE-160-4
Relevant identified uses of the substance or mixture and uses advised against
Recommended use : Resin for composites
Details of the supplier of the safety data sheet
Manufacturer
Gougeon Brothers, Inc
100 Patterson Ave.
Bay City, MI 48706 – U.S.A.
T 866-937-8797 or 989-684-7286
www.westsystem.com
Emergency telephone number
Emergency number : CHEMTREC 1 (800) 424-9300
CHEMTREC International +1 (703) 527-3887 24 hr
SECTION 2: Hazard(s) identification
Classification of the substance or mixture
Skin Irrit. 2
Eye Irrit. 2A
Skin Sens. 1
Aquatic Chronic 2
Label elements
Hazard pictograms (GHS) :
GHS07
GHS09
Signal word (GHS)
:
Warning
Hazard statements (GHS)
:
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Toxic to aquatic life with long lasting effects
Precautionary statements (GHS)
:
Avoid breathing dust/fume/gas/mist/vapours/spray. Wash hands thoroughly after handling. Contaminated work clothing must not be allowed out of
the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. If on skin: Wash with
plenty of water. If skin irritation or rash occurs: Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing
and wash it before reuse. Collect spillage. Dispose of contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation
Other hazards
No additional information available.
Unknown acute toxicity
No additional information available.
SECTION 3: Composition/information on ingredients
Substance
Not applicable
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 2/7
Mixtures
Name Product identifier HPR %
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer
(CAS No) 25085-99-8 60 – 80
Phenol, polymer with formaldehyde, glycidyl ether
(CAS No) 28064-14-4 10 – 30
Benzyl alcohol
(CAS No) 100-51-6 1 – 5
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester
(CAS No) 57834-33-0 1 – 5
The exact chemical identity and/or exact percentage (concentration) of each ingredient may be held as confidential business information (CBI). Any
ingredient not disclosed in this section may have been determined not to be hazardous to health or the environment, or it may be present at a level
below its disclosure threshold.
SECTION 4: First aid measures
Description of first aid measures
First-aid measures after inhalation : If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical advice/attention if you feel unwell.
First-aid measures after skin contact : In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing
and shoes. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get
medical advice/attention.
First-aid measures after eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to
do, remove contact lenses, if worn. If irritation persists, get medical attention.
First-aid measures after ingestion : If swallowed, do NOT induce vomiting unless directed to do so by medical personnel. Never give
anything by mouth to an unconscious person. Get medical advice/attention if you feel unwell.
Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Causes skin irritation. Symptoms may include redness, edema, drying, defatting and cracking
of the skin. May cause an allergic skin reaction.
Symptoms/injuries after eye contact : Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva.
Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Indication of any immediate medical attention and special treatment needed
Symptoms may not appear immediately. In case of accident or if you feel unwell, seek medical advice immediately (show the label or SDS where
possible).
SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media : Foam. Carbon dioxide. Dry chemical.
Unsuitable extinguishing media : Do not use a heavy water stream.
Special hazards arising from the substance or mixture
Fire hazard : Products of combustion may include, and are not limited to: oxides of carbon, phenolics.
Reactivity : No dangerous reaction known under conditions of normal use.
Advice for firefighters
Protection during firefighting : Keep upwind of fire. Wear full fire fighting turn-out gear (full Bunker gear) and respiratory
protection (SCBA).
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
General measures : Use personal protection recommended in Section 8. Isolate the hazard area and deny entry to
unnecessary and unprotected personnel.
For non-emergency personnel
No additional information available
For emergency responders
No additional information available
Environmental precautions
Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 3/7
Methods and material for containment and cleaning up
For containment : Stop leak if safe to do so. Contain and/or absorb spill with inert material (e.g. sand, vermiculite),
then place in a suitable container. Do not flush to sewer or allow to enter waterways. Use
appropriate Personal Protective Equipment (PPE).
Methods for cleaning up : Scoop up material and place in a disposal container. Provide ventilation.
Reference to other sections
See section 8 for further information on protective clothing and equipment and section 13 for advice on waste disposal.
SECTION 7: Handling and storage
Precautions for safe handling
Precautions for safe handling : Avoid contact with skin and eyes. Avoid breathing dust/fume/gas/mist/vapours/spray. Do not
swallow. Handle and open container with care. When using do not eat, drink or smoke. When
mixed with epoxy curing agents this product causes an exothermic reaction, which in large
masses, can produce enough heat to damage or ignite surrounding materials and emit fumes
and vapors that vary widely in composition and toxicity.
Hygiene measures : Launder contaminated clothing before reuse. Wash hands before eating, drinking, or smoking.
Contaminated work clothing should not be allowed out of the workplace.
Conditions for safe storage, including any incompatibilities
Storage conditions : Keep out of the reach of children. Keep container tightly closed. Store in dry, cool, well-
ventilated area. Protect from moisture. Storage temperature : 40 F (4 C) – 120 F (49 C).
SECTION 8: Exposure controls/personal protection
Control parameters
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
Not applicable
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
Not applicable
Benzyl alcohol (100-51-6)
AIHA WEEL TWA (ppm) 10 ppm
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester (57834-33-0)
Not applicable
Exposure controls
Appropriate engineering controls : Use ventilation adequate to keep exposures (airborne levels of dust, fume, vapor, etc.) below
recommended exposure limits.
Hand protection : Wear chemically resistant protective gloves.
Eye protection : Wear eye/face protection.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator selection
must be based on known or anticipated exposure levels, the hazards of the product and the
safe working limits of the selected respirator.
Environmental exposure controls : Maintain levels below Community environmental protection thresholds.
Other information : Do not eat, smoke or drink where material is handled, processed or stored. Wash hands
carefully before eating or smoking. Handle according to established industrial hygiene and
safety practices.
SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
Physical state : Liquid
Appearance : No data available
Colour : Colourless
Odour : Mild
Odour threshold : No data available
pH : No data available
Melting point : No data available
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 4/7
Freezing point : No data available
Boiling point : > 400 F (204 C) Estimated based on ingredient data.
Flash point : > 200 F (93 C) Estimated based on ingredient data.
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Non flammable.
Vapour pressure : No data available
Relative vapour density at 20 C : Heavier than air. (Estimated based on ingredient data.)
Relative density : 1.17
Solubility : No data available
Partition coefficient n-octanol/water : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
Other information
Bulk density : 9.7 lb/gal (1.17 kg/L)
SECTION 10: Stability and reactivity
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : Stable under normal storage conditions.
Possibility of hazardous reactions : No dangerous reaction known under conditions of normal use. A mass of more than one pound
of product plus an aliphatic amine will cause irreversible polymerization with significant heat
buildup. Strong acids, bases, amines and mercaptans can cause polymerization.
Conditions to avoid : Heat. Incompatible materials.
Incompatible materials : Strong acids. Bases. Amines. Mercaptans.
Hazardous decomposition products : May include, and are not limited to: oxides of carbon, phenolics.
SECTION 11: Toxicological information
Information on toxicological effects
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
LD50 oral rat > 15000 mg/kg
LD50 dermal rabbit > 23000 mg/kg
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
LD50 oral rat > 2000 mg/kg
LD50 dermal rat 2000 mg/kg
Benzyl alcohol (100-51-6)
LD50 oral rat 1620 mg/kg
LC50 inhalation rat > 4.18 mg/l/4h
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester (57834-33-0)
LD50 oral rat 1000 – 2000 mg/kg
Acute toxicity (oral) : Not classified.
Acute toxicity (dermal) : Not classified.
Acute toxicity (inhalation) : Not classified.
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified.
Carcinogenicity : Not classified.
Reproductive toxicity : Not classified.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 5/7
Specific target organ toxicity (single
exposure)
: Not classified.
Specific target organ toxicity (repeated
exposure)
: Not classified.
Aspiration hazard : Not classified.
Symptoms/injuries after inhalation : May cause respiratory tract irritation.
Symptoms/injuries after skin contact : Causes skin irritation. Symptoms may include redness, edema, drying, defatting and cracking
of the skin. May cause an allergic skin reaction.
Symptoms/injuries after eye contact : Causes serious eye irritation. Symptoms may include discomfort or pain, excess blinking and
tear production, with marked redness and swelling of the conjunctiva.
Symptoms/injuries after ingestion : May be harmful if swallowed. May cause stomach distress, nausea or vomiting.
Other information : Likely routes of exposure: ingestion, inhalation, skin and eye.
SECTION 12: Ecological information
Toxicity
Ecology – general : Toxic to aquatic life with long lasting effects.
Benzyl alcohol (100-51-6)
LC50 fish 1 460 mg/l (Exposure time: 96 h – Species: Pimephales promelas [static])
EC50 Daphnia 1 23 mg/l (Exposure time: 48 h – Species: water flea)
LC50 fish 2 10 mg/l (Exposure time: 96 h – Species: Lepomis macrochirus [static])
Persistence and degradability
PRO-SET SBE-160 Resin
Persistence and degradability Not established.
Bioaccumulative potential
PRO-SET SBE-160 Resin
Bioaccumulative potential Not established.
Benzyl alcohol (100-51-6)
Partition coefficient n-octanol/water 1.1
Mobility in soil
PRO-SET SBE-160 Resin
Ecology – soil No additional information available.
Other adverse effects
Effect on the global warming : No known effects from this product.
Name CAS# Ecotoxicity Classification Information
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer
25085-99-8 Aquatic Chronic Cat. 2
Phenol, polymer with formaldehyde, glycidyl ether
28064-14-4 Aquatic Chronic Cat. 2
Benzyl alcohol
100-51-6 Not Classified
Benzoic acid, 4[{(methylphenylamino) methylene} amino]-, ethyl ester 57834-33-0 Not Classified
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
Waste treatment methods
Product/Packaging disposal
recommendations
: Avoid release to the environment. This material must be disposed of in accordance with all
local, state, provincial, and federal regulations. The generation of waste should be avoided or
minimized wherever possible.
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 6/7
SECTION 14: Transport information
Department of Transportation (DOT) and Transportation of Dangerous Goods (TDG)
In accordance with DOT/TDG
Not regulated
Transport by sea
In accordance with IMDG
UN-No. (IMDG) : 3082
Proper Shipping Name (IMDG) : ENVIRONMENTALLY HAZA RDOUS SUBSTANCE, LIQUID, N.O.S. (Epoxy resin)
Class (IMDG) : 9
Packing group (IMDG) : III
EmS Number : F-A, S-F
Marine pollutant : Yes
Transport by air
In accordance with IATA
UN-No. (IATA) : 3082
Proper Shipping Name (IATA) : Environmentally hazardous substance, liquid, n.o.s. (Epoxy resin)
Class (IATA) : 9
Packing group (IATA) : III
Marine pollutant : Yes
SECTION 15: Regulatory information
Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
All components of this product are listed, or excluded from listing, on the Canadian DSL (Domestic Substances List) and NDSL (Non-Domestic
Substances List) inventories.
Oxirane, 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis-, homopolymer (25085-99-8)
EPA TSCA Regulatory Flag XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)
EPA TSCA Regulatory Flag XU – XU – indicates a substance exempt from reporting under the Inventory Update Reporting
Rule, i.e, Partial Updating of the TSCA Inventory Data Base Production and Site Reports (40
CFR 710(C)).
Epichlorohydrin (106-89-8)
Listed on the United States SARA Section 302
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 100 lb
SARA Section 302 Threshold Planning
Quantity (TPQ)
1000 lb
SARA Section 313 – Emission Reporting 0.1 %
International regulations
No additional information available
US State regulations
California Proposition 65 – This product contains, or may contain, trace quantities of a substance(s) known to the state of California to cause
cancer, developmental and/or reproductive harm
Epichlorohydrin (106-89-8)
U.S. – California –
Proposition 65 –
Carcinogens List
U.S. – California –
Proposition 65 –
Developmental Toxicity
U.S. – California –
Proposition 65 –
Reproductive Toxicity –
Female
U.S. – California –
Proposition 65 –
Reproductive Toxicity –
Male
No significant risk
level (NSRL)
Yes No No Yes 9 g/day
PRO-SET SBE-160 Resin
Safety Data Sheet
According to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012 and the Hazardous Products Regulations (HPR) WHMIS 2015
01/25/2019 EN (English) 7/7
Benzyl alcohol (100-51-6)
U.S. – Pennsylvania – RTK (Right to Know) List
Epichlorohydrin (106-89-8)
U.S. – New Jersey – Right to Know Hazardous Substance List
U.S. – Pennsylvania – RTK (Right to Know) – Environmental Hazard List
U.S. – Pennsylvania – RTK (Right to Know) – Special Hazardous Substances
U.S. – Pennsylvania – RTK (Right to Know) List
SECTION 16: Other information
Date of issue : 09/10/2015
Revision date : 01/25/2019
Other information : None.
NFPA health hazard : 2
NFPA fire hazard : 1
NFPA reactivity : 1
HMIS III Rating
Health : 2 Moderate Hazard
Flammability : 1 Slight Hazard
Physical : 1 Slight Hazard
Disclaimer: We believe the statements, technical information and recommendations contained herein are reliable, but they are given without warranty or guarantee of any kind. The information contained
in this document applies to this specific material as supplied. It may not be valid for this material if it is used in combination with any other materials. It is the user s responsibility to satisfy oneself as to the
suitability and completeness of this information for the user s own particular use.
