08FLASH23_SDS.pdf

SDS: 0059735
Date Prepared: 02/06/2017
SAFETY DATA SHEET

1. IDENTIFICATION
Product Name: Polyester Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyethyleneterephtalate
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: STT125, STT205, STT205LG, STTRC125, STTRC150, STTRC205, STTRC50,
STTRC75, FT1, FT1A, FT2, FT3, FT8, RAPHOLD 10, FLASHTAPE 1.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)

2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable

Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 100 Aquatic Chronic 4 (H413) –
Rubber, natural
9006-04-6
0 – 50 Not Classified –
Limestone (calcium carbonate)
1317-65-3
0 – 20 Not classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.

4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Page 2 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Page 3 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: mild
Boiling Point: ~Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable

SDS: 0059735
ACGIH (TLV): Not established
Date Prepared: 02/06/2017
Other Value: Not established
Page 4 of 8
9006-04-6 Rubber, natural
1317-65-3 Limestone (calcium carbonate)
OSHA (PEL): Not established
Polyester Tape
ACGIH (TLV): (skin)
0.0001 mg/m
3
inhalable particulate matter inhalable allergenic proteins (TWA)
OSHA (PEL):
Other Value: Not established
15 mg/m
3
total dust (TWA)
5 mg/m
3
respirable fraction (TWA)

10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: None known
Hazardous Decomposition
Products:
nitrogen oxides
hydrocarbons
carbon monoxide (CO)
acetaldehyde

11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
SDS: 0059735
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2,000 mg/kg
Not an expected route of
exposure
Page 5 of 8
inhalation
oral (gavage)
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
Polyester Tape
rat
Acute Irritation
Acute LD50

California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.

12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
Rubber, natural
9006-04-6
Not available Not available Not available
Limestone (calcium carbonate)
1317-65-3
Not available Not available Not available

13. DISPOSAL CONSIDERATIONS
SDS: 0059735 Date Prepared: 02/06/2017
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Page 6 of 8Polyester Tape
Calcium carbonate is expected to have low oral and dermal toxicity. Dust may cause mechanical irritation of the eyes.
Prolonged or repeated contact may have a drying effect on the skin and may also cause irritation (skin abrasion).
Exposure to dust generated during handling or use may irritate the nose, throat and upper respiratory tract. Calcium
carbonate is not expected to produce dermal sensitization. Chronic exposure to dust at concentrations exceeding the
occupational exposure limits may cause pneumoconiosis (lung disease). Calcium carbonate may contain trace amounts
of crystalline silica as an impurity. Chronic exposure to crystalline silica dust at concentrations above the occupational
exposure limits may cause silicosis. Crystalline silica is considered a known human carcinogen by NTP.

13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/06/2017 Page 7 of 8Polyester Tape SDS: 0059735

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases

Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com

This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.

Date Prepared: 02/06/2017
Modified siloxane/silicone resin
Page 8 of 8
H413 – May cause long lasting harmful effects to aquatic life.
Polyester Tape SDS: 0059735

08FLASH22_SDS.pdf

SDS: 0059735
Date Prepared: 02/06/2017
SAFETY DATA SHEET

1. IDENTIFICATION
Product Name: Polyester Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyethyleneterephtalate
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: STT125, STT205, STT205LG, STTRC125, STTRC150, STTRC205, STTRC50,
STTRC75, FT1, FT1A, FT2, FT3, FT8, RAPHOLD 10, FLASHTAPE 1.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)

2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable

Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 100 Aquatic Chronic 4 (H413) –
Rubber, natural
9006-04-6
0 – 50 Not Classified –
Limestone (calcium carbonate)
1317-65-3
0 – 20 Not classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.

4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Page 2 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Page 3 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: mild
Boiling Point: ~Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable

SDS: 0059735
ACGIH (TLV): Not established
Date Prepared: 02/06/2017
Other Value: Not established
Page 4 of 8
9006-04-6 Rubber, natural
1317-65-3 Limestone (calcium carbonate)
OSHA (PEL): Not established
Polyester Tape
ACGIH (TLV): (skin)
0.0001 mg/m
3
inhalable particulate matter inhalable allergenic proteins (TWA)
OSHA (PEL):
Other Value: Not established
15 mg/m
3
total dust (TWA)
5 mg/m
3
respirable fraction (TWA)

10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: None known
Hazardous Decomposition
Products:
nitrogen oxides
hydrocarbons
carbon monoxide (CO)
acetaldehyde

11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
SDS: 0059735
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2,000 mg/kg
Not an expected route of
exposure
Page 5 of 8
inhalation
oral (gavage)
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
Polyester Tape
rat
Acute Irritation
Acute LD50

California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.

12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
Rubber, natural
9006-04-6
Not available Not available Not available
Limestone (calcium carbonate)
1317-65-3
Not available Not available Not available

13. DISPOSAL CONSIDERATIONS
SDS: 0059735 Date Prepared: 02/06/2017
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Page 6 of 8Polyester Tape
Calcium carbonate is expected to have low oral and dermal toxicity. Dust may cause mechanical irritation of the eyes.
Prolonged or repeated contact may have a drying effect on the skin and may also cause irritation (skin abrasion).
Exposure to dust generated during handling or use may irritate the nose, throat and upper respiratory tract. Calcium
carbonate is not expected to produce dermal sensitization. Chronic exposure to dust at concentrations exceeding the
occupational exposure limits may cause pneumoconiosis (lung disease). Calcium carbonate may contain trace amounts
of crystalline silica as an impurity. Chronic exposure to crystalline silica dust at concentrations above the occupational
exposure limits may cause silicosis. Crystalline silica is considered a known human carcinogen by NTP.

13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/06/2017 Page 7 of 8Polyester Tape SDS: 0059735

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases

Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com

This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.

Date Prepared: 02/06/2017
Modified siloxane/silicone resin
Page 8 of 8
H413 – May cause long lasting harmful effects to aquatic life.
Polyester Tape SDS: 0059735

08FLASH12_SDS.pdf

SDS: 0059735
Date Prepared: 02/06/2017
SAFETY DATA SHEET

1. IDENTIFICATION
Product Name: Polyester Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyethyleneterephtalate
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: STT125, STT205, STT205LG, STTRC125, STTRC150, STTRC205, STTRC50,
STTRC75, FT1, FT1A, FT2, FT3, FT8, RAPHOLD 10, FLASHTAPE 1.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)

2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable

Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 100 Aquatic Chronic 4 (H413) –
Rubber, natural
9006-04-6
0 – 50 Not Classified –
Limestone (calcium carbonate)
1317-65-3
0 – 20 Not classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.

4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Page 2 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Page 3 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: mild
Boiling Point: ~Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable

SDS: 0059735
ACGIH (TLV): Not established
Date Prepared: 02/06/2017
Other Value: Not established
Page 4 of 8
9006-04-6 Rubber, natural
1317-65-3 Limestone (calcium carbonate)
OSHA (PEL): Not established
Polyester Tape
ACGIH (TLV): (skin)
0.0001 mg/m
3
inhalable particulate matter inhalable allergenic proteins (TWA)
OSHA (PEL):
Other Value: Not established
15 mg/m
3
total dust (TWA)
5 mg/m
3
respirable fraction (TWA)

10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: None known
Hazardous Decomposition
Products:
nitrogen oxides
hydrocarbons
carbon monoxide (CO)
acetaldehyde

11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
SDS: 0059735
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2,000 mg/kg
Not an expected route of
exposure
Page 5 of 8
inhalation
oral (gavage)
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
Polyester Tape
rat
Acute Irritation
Acute LD50

California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.

12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
Rubber, natural
9006-04-6
Not available Not available Not available
Limestone (calcium carbonate)
1317-65-3
Not available Not available Not available

13. DISPOSAL CONSIDERATIONS
SDS: 0059735 Date Prepared: 02/06/2017
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Page 6 of 8Polyester Tape
Calcium carbonate is expected to have low oral and dermal toxicity. Dust may cause mechanical irritation of the eyes.
Prolonged or repeated contact may have a drying effect on the skin and may also cause irritation (skin abrasion).
Exposure to dust generated during handling or use may irritate the nose, throat and upper respiratory tract. Calcium
carbonate is not expected to produce dermal sensitization. Chronic exposure to dust at concentrations exceeding the
occupational exposure limits may cause pneumoconiosis (lung disease). Calcium carbonate may contain trace amounts
of crystalline silica as an impurity. Chronic exposure to crystalline silica dust at concentrations above the occupational
exposure limits may cause silicosis. Crystalline silica is considered a known human carcinogen by NTP.

13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/06/2017 Page 7 of 8Polyester Tape SDS: 0059735

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases

Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com

This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.

Date Prepared: 02/06/2017
Modified siloxane/silicone resin
Page 8 of 8
H413 – May cause long lasting harmful effects to aquatic life.
Polyester Tape SDS: 0059735

08FLASH21_SDS.pdf

SDS: 0059735
Date Prepared: 02/06/2017
SAFETY DATA SHEET

1. IDENTIFICATION
Product Name: Polyester Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyethyleneterephtalate
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: STT125, STT205, STT205LG, STTRC125, STTRC150, STTRC205, STTRC50,
STTRC75, FT1, FT1A, FT2, FT3, FT8, RAPHOLD 10, FLASHTAPE 1.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
CYTEC INDUSTRIES INC., 504 CARNEGIE CENTER, PRINCETO N, NEW JERSEY 08540, USA
For Product and all Non-Emergency Information call 1-800/652-6013. Outside the USA and Canada call 1-973/357-
3193.
EMERGENCY PHONE (24 hours/day) – For emergency only involving spill, leak, fire, exposure or accident call:
Asia Pacific:
Australia – +61 2 8014 4558 (Carechem24)
China (PRC) – +86 0532 83889090 (NRCC) +86 512 8090 3042 (Carechem24)
New Guinea – +61 2 8014 4558 (Carechem24)
New Zealand – +64 9 929 1483 (Carechem24)
India, Japan, Korea, Malaysia, Thailand – +65 3158 1074 (Carechem24 Singapore)
India (Hindi Speaking Only) – +65 3158 1198 or 000800 100 7479 (Carechem24 Singapore)
Canada: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)
Europe/Africa/Middle East (Carechem24 UK):
Europe, Middle East, Africa, Israel – +44 1235 239 670
(Arabic speaking countries) – +44 1235 239 671
Latin America:
Brazil – +55 11 3197 5891 (Carechem24)
Chile – +56 2 2582 9336 (Carechem24)
All Others – +44 1235 239 670 (Carechem24 UK)
USA: 800 424 9300 (Within US,Canada) +1 (703) 527-3887 (International) (CHEMTREC)

2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable

Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article?Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 100 Aquatic Chronic 4 (H413) –
Rubber, natural
9006-04-6
0 – 50 Not Classified –
Limestone (calcium carbonate)
1317-65-3
0 – 20 Not classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.

4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Page 2 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Page 3 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: mild
Boiling Point: ~Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable

SDS: 0059735
ACGIH (TLV): Not established
Date Prepared: 02/06/2017
Other Value: Not established
Page 4 of 8
9006-04-6 Rubber, natural
1317-65-3 Limestone (calcium carbonate)
OSHA (PEL): Not established
Polyester Tape
ACGIH (TLV): (skin)
0.0001 mg/m
3
inhalable particulate matter inhalable allergenic proteins (TWA)
OSHA (PEL):
Other Value: Not established
15 mg/m
3
total dust (TWA)
5 mg/m
3
respirable fraction (TWA)

10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: None known
Hazardous Decomposition
Products:
nitrogen oxides
hydrocarbons
carbon monoxide (CO)
acetaldehyde

11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
SDS: 0059735
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2,000 mg/kg
Not an expected route of
exposure
Page 5 of 8
inhalation
oral (gavage)
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
Polyester Tape
rat
Acute Irritation
Acute LD50

California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.

12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
Rubber, natural
9006-04-6
Not available Not available Not available
Limestone (calcium carbonate)
1317-65-3
Not available Not available Not available

13. DISPOSAL CONSIDERATIONS
SDS: 0059735 Date Prepared: 02/06/2017
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Page 6 of 8Polyester Tape
Calcium carbonate is expected to have low oral and dermal toxicity. Dust may cause mechanical irritation of the eyes.
Prolonged or repeated contact may have a drying effect on the skin and may also cause irritation (skin abrasion).
Exposure to dust generated during handling or use may irritate the nose, throat and upper respiratory tract. Calcium
carbonate is not expected to produce dermal sensitization. Chronic exposure to dust at concentrations exceeding the
occupational exposure limits may cause pneumoconiosis (lung disease). Calcium carbonate may contain trace amounts
of crystalline silica as an impurity. Chronic exposure to crystalline silica dust at concentrations above the occupational
exposure limits may cause silicosis. Crystalline silica is considered a known human carcinogen by NTP.

13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods? Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods? Not applicable/Not regulated
ICAO / IATA
Dangerous Goods? Not applicable/Not regulated
IMO
Dangerous Goods? Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/06/2017 Page 7 of 8Polyester Tape SDS: 0059735

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Philippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases

Prepared By: Legal & Compliance Services; E-mail: custinfo@solvay.com

This information is given without any warranty or representation. We do not assume any legal responsibility for same, nor do we give permission,
inducement, or recommendation to practice any patented invention without a license. It is offered solely for your consideration, investigation, and
verification. Before using any product, read its label.

Date Prepared: 02/06/2017
Modified siloxane/silicone resin
Page 8 of 8
H413 – May cause long lasting harmful effects to aquatic life.
Polyester Tape SDS: 0059735

08FLASH11_SDS.pdf

SDS: 0059735
Date Prepared: 02/06/2017
SAFETY DATA SHEET

1. IDENTIFICATION
Product Name: Polyester Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyethyleneterephtalate
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: STT125, STT205, STT205LG, STTRC125, STTRC150, STTRC205, STTRC50,
STTRC75, FT1, FT1A, FT2, FT3, FT8, RAPHOLD 10, FLASHTAPE 1.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.

2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International

Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Not applicable

3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 100 Aquatic Chronic 4 (H413) –
Rubber, natural
9006-04-6
0 – 50 Not Classified –
Limestone (calcium carbonate)
1317-65-3
0 – 20 Not classified –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.

4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable

Page 2 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus. Wear full firefighting protective clothing. See
MSDS Section 8 (Exposure Controls/Personal Protection).
Special Hazards:
None known

6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Where exposure level is not known, wear approved, positive pressure, self-contained respirator. Where exposure level is
known, wear approved respirator suitable for level of exposure. Refer to Section 8 (Exposure Controls/Personal
Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.

7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
Where exposures are below the established exposure limit, no respiratory protection is required. Where exposures
exceed the established exposure limit, use respiratory protection recommended for the material and level of exposure.
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Page 3 of 8Polyester Tape SDS: 0059735 Date Prepared: 02/06/2017

Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.

Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.

9. PHYSICAL AND CHEMICAL PROPERTIES
Color: various
Appearance: tape
Odor: mild
Boiling Point: ~Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content:
Flash Point: Not available
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not available
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not applicable
Kst (bar-m/sec): Not applicable
Maximum Explosion Pressure (Pmax): Not applicable
Dust Class: Not applicable
Minimum Ignition Energy (MIE) (mJ): Not applicable
Minimum Ignition Temperature (MIT) ( C): Not applicable
Minimum Explosive Concentration (MEC) (g/m
3
): Not applicable
Limiting Oxygen Concentration (LOC) (%): Not applicable

SDS: 0059735
ACGIH (TLV): Not established
Date Prepared: 02/06/2017
Other Value: Not established
Page 4 of 8
9006-04-6 Rubber, natural
1317-65-3 Limestone (calcium carbonate)
OSHA (PEL): Not established
Polyester Tape
ACGIH (TLV): (skin)
0.0001 mg/m
3
inhalable particulate matter inhalable allergenic proteins (TWA)
OSHA (PEL):
Other Value: Not established
15 mg/m
3
total dust (TWA)
5 mg/m
3
respirable fraction (TWA)

10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Conditions To Avoid: None known
Polymerization: Will not occur
Conditions To Avoid: None known
Materials To Avoid: None known
Hazardous Decomposition
Products:
nitrogen oxides
hydrocarbons
carbon monoxide (CO)
acetaldehyde

11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
skin No data
SDS: 0059735
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2,000 mg/kg
Not an expected route of
exposure
Page 5 of 8
inhalation
oral (gavage)
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
Polyester Tape
rat
Acute Irritation
Acute LD50

California Proposition 65 Warning (applicable in California only) – This product contains (a) chemical(s) known to the State
of California to cause cancer.

12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
This material is not classified as dangerous for the environment.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
Rubber, natural
9006-04-6
Not available Not available Not available
Limestone (calcium carbonate)
1317-65-3
Not available Not available Not available

13. DISPOSAL CONSIDERATIONS
SDS: 0059735 Date Prepared: 02/06/2017
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Page 6 of 8Polyester Tape
Calcium carbonate is expected to have low oral and dermal toxicity. Dust may cause mechanical irritation of the eyes.
Prolonged or repeated contact may have a drying effect on the skin and may also cause irritation (skin abrasion).
Exposure to dust generated during handling or use may irritate the nose, throat and upper respiratory tract. Calcium
carbonate is not expected to produce dermal sensitization. Chronic exposure to dust at concentrations exceeding the
occupational exposure limits may cause pneumoconiosis (lung disease). Calcium carbonate may contain trace amounts
of crystalline silica as an impurity. Chronic exposure to crystalline silica dust at concentrations above the occupational
exposure limits may cause silicosis. Crystalline silica is considered a known human carcinogen by NTP.

13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.

14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Date Prepared: 02/06/2017 Page 7 of 8Polyester Tape SDS: 0059735

Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases
verification. Before using any product, read its label.
Date Prepared: 02/06/2017
Modified siloxane/silicone resin
Page 8 of 8
H413 – May cause long lasting harmful effects to aquatic life.
Polyester Tape SDS: 0059735

Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com

Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.

08FB2272_SDS.pdf

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Corehold P-HA, Econobreaker 2R, Econotape 1, Econotape 2, Flashbreaker 1, 2, 5,
Flashbreaker 1R, 2R, 5R, Flashbreaker 1(HT), 2(HT), 2R(HT), Flashbreaker 2CBS,
Flashbreaker PS1, Airhold 1CBS, Airhold 10 CBS, Wrightcast 8500 PS, Airkap 1
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 2 of 7
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of
fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills. Processing, e.g. by cutting, sawing or grinding, can produce
particles and dust. Avoid inhalation of dusts, as even inert dusts may functionally affect
respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Article: Pressure sensitive tape
Carrier type : Polyester, nylon or polyimide
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of strong heating / In case of fire may be liberated: Caprolactam, nitrogen oxides
(NOx), carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 3 of 7
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear
appropriate protective equipment. Keep unprotected people away. When using do not
eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room
temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 4 of 7
Personal protection equipment (PPE)
Eye/face protectionAt processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 5 of 7
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Caprolactam, nitrogen oxides
(NOx), carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 6 of 7
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in
the same way as the substance itself. Non-contaminated packages may be recycled. Do
not remove label until container is thoroughly cleaned.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

08FL160A_SDS.pdf

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Resin Infusion Products
Knitflow 110, Knitflow 150, PVC Tube, FlowPeel 160-37P16-ESG, Dahltexx SP-2,
Dahltexx SP-3, FlowRunner KF160, Vac-Brake, Vac-Brake Pro, Flowstrip PP4, Flowstrip
PP4 Max, Dahlvac RC Vacuum Hose, Flowlease 160-PP200, PP200, Dahlvac MB80,
Breatherflow 20, Dahlpac MC79, Tube mesh, SpiralMesh, Flowstrip, Flowstrip 39,
Flowstrip 39MAX, Greenflow 75, Greenflow 185, Knitflow 160, Knitflow 105 HT, Resinflow
100, Resinflow 60, Resinflow 20, Resinflow 90HT, Flowlease 160-37P16, Flowlease
75-37P16, Flowlease Blue, Flowlease Black, OF313, OF500, OF750, OF1000, OF625V,
Resintrak, Vactrak, VAC-RIC LT, VAC-RIC HT, RIC, RIC HT, RIA, polyethylene and nylon
tubing, , polyethylene and nylon spiral tubing, nylon fittings (NTF, NEF, NCF), Sil-tube,
HTRIL-S59, Infusion valve, Hose clamps A & B, Flowrunner PP2, Tac-Strip HT, PP150,
Dahlpac HT
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Resin distribution media and auxiliaries
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 2 of 8
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Processing,
e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid inhalation of
dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Thermoplastic, Silicone, Fiberglass, Metal
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:After contact with molten product, cool skin area rapidly with cold water. Do not peel
solidified product off the skin. Seek medical attention.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of
troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
Information to physician
Treat symptomatically.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 3 of 8
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of fire may be liberated: Caprolactam, nitrogen oxides (NOx), amines, carbon
monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective
clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe
fumes. Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid
inhalation and contact with skin and eyes. Wear appropriate protective equipment. Keep
unprotected people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
When using do not eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Keep away from
incompatible materials. Store at room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 4 of 8
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:At processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 5 of 8
Melting point/freezing point: 212 – 500 F
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: at 68 F: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong acids, strong oxidizing agents.
Hazardous decomposition products:
Caprolactam, nitrogen oxides (NOx), amines, carbon monoxide and carbon dioxide
Thermal decomposition:No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 6 of 8
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting,
sawing or grinding, can produce particles and dust. Dust may irritate airways and cause
bronchitis symptoms.
Information about Caprolactam: Harmful if swallowed. Harmful if inhaled. Causes skin
irritation. Causes serious eye irritation. May cause respiratory irritation.
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released
mist or vapors can irritate the respiratory tracts.
Other symptoms: Cough, respiratory complaints, dizziness, nausea, vomiting.
After contact with skin: The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical
irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Avoid release to the environment.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 7 of 8
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Waste key number:
15 01 01 =paper and cardboard packaging or 150102 = Plastic packaging
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

Safety information sheet
Voluntary product information following the Safety Data Sheet format
Resin Infusion Products
Material number 1074
Revision date: 8/29/2024
Version: 14.5
Replaces version: 14.4
Language: en-US
Date of first version:10/5/2015
Page: 8 of 8
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – U.S. State Regulations
No data available
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be
examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be
provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of
this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU
regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected
with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

08FB2172_SDS.pdf

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: Pressure Sensitive Tapes
Corehold P-HA, Econobreaker 2R, Econotape 1, Econotape 2, Flashbreaker 1, 2, 5,
Flashbreaker 1R, 2R, 5R, Flashbreaker 1(HT), 2(HT), 2R(HT), Flashbreaker 2CBS,
Flashbreaker PS1, Airhold 1CBS, Airhold 10 CBS, Wrightcast 8500 PS, Airkap 1
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Pressure sensitive tape
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 2 of 7
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of
fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills. Processing, e.g. by cutting, sawing or grinding, can produce
particles and dust. Avoid inhalation of dusts, as even inert dusts may functionally affect
respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Article: Pressure sensitive tape
Carrier type : Polyester, nylon or polyimide
Adhesive type: Silicone, rubber or acrylic
4. First aid measures
In case of inhalation:In case of inhalation of decomposition products, affected person should be moved into
fresh air and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of
flowing water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent
symptoms, consult an opthalmologist.
After swallowing: Not a probable route of exposure.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
No data available
Auto-ignition temperature:
No data available
Suitable extinguishing media:
Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at
elevated temperatures.
In case of strong heating / In case of fire may be liberated: Caprolactam, nitrogen oxides
(NOx), carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 3 of 7
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use a water fog to control vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid inhalation and contact with
skin and eyes. Wear appropriate protective equipment. Keep unprotected people away.
Ensure adequate ventilation, especially in confined areas.
Environmental precautions:
Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the
formation of aerosol/vapors. Avoid inhalation and contact with skin and eyes. Wear
appropriate protective equipment. Keep unprotected people away. When using do not
eat, drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Store at room
temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 4 of 7
Personal protection equipment (PPE)
Eye/face protectionAt processing (recommended): Safety glasses in accordance with OSHA 29 CFR:
1910.133 or ANSI Z87.1-2010.
Skin protection At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise
when handling the product. If the concentration is exceeded, self-contained breathing
apparatus must be used.
General hygiene considerations:
Handle in accordance with good industrial hygiene and safety practice. Wash hands
before breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability:Stable under recommended storage conditions.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 5 of 7
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the
formation of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Caprolactam, nitrogen oxides
(NOx), carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures.
Symptoms
In case of inhalation:
Overheating released mist or vapors can irritate the respiratory tracts.
After contact with skin: Itching redness of the skin
The melted product can cause severe burns.
After eye contact: Process vapors can irritate the eyes.
12. Ecological information
Ecotoxicity
Effects in sewage plants:The insoluble part can be precipitated mechanically in suitable sewage treatment plants.
Further details: No data available
Mobility in soil
No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 6 of 7
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information:Do not allow to penetrate into soil, waterbodies or drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in
the same way as the substance itself. Non-contaminated packages may be recycled. Do
not remove label until container is thoroughly cleaned.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA
inventory listing requirements.
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY INFORMATION SHEET
Voluntary product information following the Safety Data Sheet format
Pressure Sensitive Tapes
Material number 1028
Revision date: 3/1/2019
Version: 7
Language: en-US
Date of first version:5/4/2015
Page: 7 of 7
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Reason of change: Changes in section 1: Changes of product list
Department issuing data sheet
Contact person: see section 1: Dept. responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each
aspect of your operation should be examined to determine if, and which additional precautions may be
necessary. All health and safety information contained in this data sheet should be provided to your
employees and customers. It is your responsibility to develop appropriate workplace instructions and training
programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and
expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet
complies with our current level of knowledge as well as with national and EU regulations. All statements or
suggestions are made without warranty, expressed or implied, regarding accuracy of information, the
hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

08ESF50084SF_SDS.pdf

Page 1/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
42 .2 .3

*

Product Identifier
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G, LC-E237G(175), LC-E242, LC-E330,
LC-E333
Relevant identified uses of the substance or mixture and uses advised against:
Product Description Epoxy Flame Retardant Film Adhesive/Prepreg
Details of the Supplier of the Safety Data Sheet:
Manufacturer/Supplier:
Lincoln Composite Materials, Inc.
15422 Electronic Ln.
Huntington Beach, CA 92649
P 714-898-8350
F 714-894-8418
www.lcmaterials.com
Emergency telephone number:
For Hazardous Materials [or Dangerous Goods] Incident. Spill, Leak, Fire, Exposure, or Accident
Call CHEMTREC Day or Night
Within USA and Canada: 1-800-424-9300 CCN701762 or +1 703-527-3887 (collect calls accepted)
Classification of the substance or mixture:
~

Skin Sens. 1 H317 May cause an allergic skin reaction.
Label elements:
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms:
~

GHS07

Signal word: Warning
Hazard-determining components of labeling:
Bisphenol A Based Epoxy Resin
Epoxy resin
Hazard statements:
H317 May cause an allergic skin reaction.
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves.
P272 Contaminated work clothing must not be allowed out of the workplace.
P321 Specific treatment (see supplementary first aid instructions on this Safety Data Sheet).
P363 Wash contaminated clothing before reuse.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P302+P352 IF ON SKIN: Wash with plenty of water.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Unknown acute toxicity:
6 % of the mixture consists of component(s) of unknown toxicity.
(Contd. on page 2)
2 Hazard(s) Identification
1 Identification

GHS 07

42 .2 .3
Page 2/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Classification system:
NFPA ratings (scale 0 – 4)
Health = 0
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
Health = 0
Fire = 1
Reactivity = 0
Hazard(s) not otherwise classified (HNOC): None known
Chemical characterization: Mixtures
Description: Mixture of substances listed below with non-hazardous additions.
Dangerous Components:
25085-99-8 Bisphenol A Based Epoxy Resin 60-90%
Skin Sens. 1, H317
25036-25-3 Epoxy resin 2-12%
Skin Sens. 1, H317; Eye Irrit. 2B, H320
10097-09-3 Methylene Diphenyl Bis (Dimethyl Urea) 2.5%
Skin Irrit. 2, H315; Eye Irrit. 2A, H319; STOT SE 3, H335
1314-60-9 diantimony pentoxide 2.5%
Skin Irrit. 2, H315; Eye Irrit. 2A, H319; STOT SE 3, H335

Description of first aid measures:
After inhalation: In case of unconsciousness place patient stably in side position for transportation.
After skin contact:
Immediately wash with water and soap and rinse thoroughly.
If skin irritation occurs, consult a doctor.
After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing: If swallowed and symptoms occur, consult a doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed: No further relevant information available.
Indication of any immediate medical attention and special treatment needed:
No further relevant information available.
Extinguishing media:
Suitable extinguishing agents: Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixture: No further relevant information available.
Advice for firefighters:
Protective equipment:
As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent)
and full protective gear to prevent contact with skin and eyes.
(Contd. on page 3)
4 First-Aid Measures
3 Composition/Information on Ingredients
5 Fire-Fighting Measures
1
0 0
HEALTH 0
FIRE 1
REACTIVITY 0

42 .2 .3
Page 3/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Personal precautions, protective equipment and emergency procedures: Not required.
Environmental precautions: Do not allow to enter sewers/surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (i.e. sand, diatomite, acid binders, universal binders, sawdust).
Ensure adequate ventilation.
Dispose of the collected material according to regulations.
Reference to other sections:
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities:
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Specific end use(s): No further relevant information available.
Additional information about design of technical systems: No further data; see section 7.
Control parameters:
Components with occupational exposure limits:
1314-60-9 diantimony pentoxide

PEL

Long-term value: 0.5 mg/m
as Sb
REL Long-term value: 0.5 mg/m
as Sb
TLV Long-term value: 0.5 mg/m
as Sb
108-95-2 Phenol

PEL

Long-term value: 19 mg/m , 5 ppm
Skin
REL Long-term value: 19 mg/m , 5 ppm
Ceiling limit value: 60* mg/m , 15.6* ppm
*15-min; Skin
TLV Long-term value: 19 mg/m , 5 ppm
Skin; BEI
(Contd. on page 4)
6 Accidental Release Measures
7 Handling and Storage
8 Exposure Controls/Personal Protection

42 .2 .3
Page 4/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Ingredients with biological limit values:
108-95-2 Phenol
BEI 250 mg/g creatinine
urine
end of shift
Phenol with hydrolysis (background, nonspecific)
Additional information: The lists that were valid during the creation of this SDS were used as basis.
Exposure controls:
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Immediately remove all soiled and contaminated clothing and wash before reuse.
Wash hands before breaks and at the end of work.
Breathing equipment: Not required.
Protection of hands:

Protective gloves

Eye protection:

Goggles recommended during refilling.

Information on basic physical and chemical properties
General Information
Appearance:
Form: Adhesive Film
Color: Cream
Odor: N/A
Odor threshold: Not determined.
Change in condition
Melting point/Melting range: Not determined.
Boiling point/Boiling range: Not determined.
Flash point: 252 C (486 F)
Flammability (solid, gaseous): Not applicable.
Ignition temperature: > 300 C (> 572 F)
Decomposition temperature: Not determined.
Auto igniting: Product is not self-igniting.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
(Contd. on page 5)
9 Physical and Chemical Properties

42 .2 .3
Page 5/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Vapor pressure: Not determined.
Density:
Relative density: Not determined.
Vapor density: Not determined.
Evaporation rate: Not determined.
Solubility in / Miscibility with:
Water: Not miscible or difficult to mix.
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not determined.
Kinematic: Not determined.
Solvent content:
Organic solvents: 0.2 %
VOC content: 0.2 %
Other information: No further relevant information available.
Reactivity: No further relevant information available.
Chemical stability: Stable under normal conditions.
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.
Information on toxicological effects:
Acute toxicity:
LD/LC50 values that are relevant for classification:
25085-99-8 Bisphenol A Based Epoxy Resin
Oral
Dermal
LD50
LD50
>5000 mg/kg (rat)
20000 mg/kg (rabbit)
10097-09-3 Methylene Diphenyl Bis (Dimethyl Urea)
Oral
Dermal
LD50
LD50
>2000 mg/kg (rat)
>5000 mg/kg (rabbit)
Primary irritant effect:
On the skin: May cause an allergic skin reaction.
On the eye: No irritating effect.
Sensitization: Sensitization possible through skin contact.
Additional toxicological information:
The product shows the following dangers according to internally approved calculation methods for
preparations:
Irritant
Carcinogenic categories:
IARC (International Agency for Research on Cancer):
Group 1 – Carcinogenic to humans
Group 2A – Probably carcinogenic to humans
(Contd. on page 6)
10 Stability and Reactivity
11 Toxicological Information

42 .2 .3
Page 6/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Group 2B – Possibly carcinogenic to humans
Group 3 – Not classifiable as to its carcinogenicity to humans
Group 4 – Probably not carcinogenic to humans
108-95-2 Phenol 3
NTP (National Toxicology Program):
None of the ingredients are listed.
OSHA-Ca (Occupational Safety & Health Administration):
None of the ingredients are listed.

Toxicity:
Aquatic toxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential: No further relevant information available.
Mobility in soil: No further relevant information available.
Additional ecological information:
General notes:
Do not allow undiluted product or product that has not been neutralized to reach ground water, water course
or sewage system.
Results of PBT and vPvB assessment:
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects: No further relevant information available.
Waste treatment methods:
Recommendation:
Observe all federal, state and local environmental regulations when disposing of this material.
Uncleaned packagings
Recommendation: Disposal must be made according to official regulations.
UN-Number:
DOT, ADR, ADN, IMDG, IATA Non-Regulated Material
UN proper shipping name:
DOT, ADR, ADN, IMDG, IATA Non-Regulated Material
Transport hazard class(es):
DOT, ADR, ADN, IMDG, IATA
Class: Non-Regulated Material
Packing group:
DOT, ADR, IMDG, IATA Non-Regulated Material
Environmental hazards: Not applicable.
Special precautions for user: Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code: Not applicable.
UN “Model Regulation”: Non-Regulated Material
(Contd. on page 7)
12 Ecological Information
13 Disposal Considerations
14 Transport Information

42 .2 .3
Page 7/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

Safety, health and environmental regulations/legislation specific for the substance or mixture:
SARA (Superfund Amendments and Reauthorization):
Section 355 (extremely hazardous substances):
108-95-2 Phenol
Section 313 (Specific toxic chemical listings):
1314-60-9 diantimony pentoxide
108-95-2 Phenol
TSCA (Toxic Substances Control Act):
All ingredients are listed or exempt from listing.
California Proposition 65:
Chemicals known to cause cancer:
None of the ingredients are listed.
Chemicals known to cause reproductive toxicity for females:
None of the ingredients are listed.
Chemicals known to cause reproductive toxicity for males:
None of the ingredients are listed.
Chemicals known to cause developmental toxicity:
None of the ingredients are listed.
New Jersey Right-to-Know List:
108-95-2 Phenol
New Jersey Special Hazardous Substance List:
108-95-2 Phenol MU, F2
Pennsylvania Right-to-Know List:
None of the ingredients are listed.
Pennsylvania Special Hazardous Substance List:
108-95-2 Phenol E
Carcinogenic categories:
EPA (Environmental Protection Agency):
108-95-2 Phenol D, I
TLV (Threshold Limit Value established by ACGIH):
108-95-2 Phenol A4
NIOSH-Ca (National Institute for Occupational Safety and Health):
None of the ingredients are listed.
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms:
~

GHS07

(Contd. on page 8)
15 Regulatory Information

42 .2 .3
Page 8/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 04/06/2016 Reviewed on 04/06/2016
Trade name: LC-E221, LC-E222, LC-E224, LC-E229, LC-E232FR, LC-E237G LC-E237G(175), LC-E242, LC-E330, LC-E333

National regulations:

Signal word: Warning
Hazard-determining components of labeling:
Bisphenol A Based Epoxy Resin
Epoxy resin
Hazard statements:
H317 May cause an allergic skin reaction.
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves.
P272 Contaminated work clothing must not be allowed out of the workplace.
P321 Specific treatment (see supplementary first aid instructions on this Safety Data Sheet).
P363 Wash contaminated clothing before reuse.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P302+P352 IF ON SKIN: Wash with plenty of water.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

The information and recommendations in this safety data sheet are, to the best of our knowledge, accurate as
of the date of issue. Nothing herein shall be deemed to create warranty, expressed or implied, and shall not
establish a legally valid contractual relationship. It is the responsibility of the user to determine applicability of
this information and the suitability of the material or product for any particular purpose.
Date of preparation / last revision: 04/06/2016 / 3
Abbreviations and acronyms:
ADR: The European Agreement concerning the International Carriage of Dangerous Goods by Road
ADN: The European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Skin Irrit. 2: Skin corrosion/irritation, Hazard Category 2
Eye Irrit. 2A: Serious eye damage/eye irritation, Hazard Category 2A
Eye Irrit. 2B: Serious eye damage/eye irritation, Hazard Category 2B
Skin Sens. 1: Sensitisation – Skin, Hazard Category 1
STOT SE 3: Specific target organ toxicity – Single exposure, Hazard Category 3
* Data compared to the previous version altered.
SDS created by MSDS Authoring Services www.msdsauthoring.com +1-877-204-9106
16 Other Information
The product is subject to be classified according with the latest version of the regulations on hazardous
substances.