by | Sep 27, 2025
SDS: 0062099
Date Prepared: 08/15/2018
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: STRETCH-VAC 250
Synonyms: None
Chemical Family: Polyurethane Film
Molecular Weight: Not applicable
Intended/Recommended Use: Film
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
By excessive exposure to dust, eye and respiratory tract irritation is possible.
Polymerization may occur from excessive heat, contamination or exposure to direct sunlight.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
No Hazardous Ingredients
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Wear full firefighting protective clothing.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018 Page 2 of 7
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire.
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed. Barrier creams may help to protect the exposed areas of the skin, they should however not be
applied once exposure has occurred.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: blue
Appearance: plastic bags
Odor: odorless
Boiling Point: Not available
Melting Point: 150 – 200 C 302 – 392 F
Page 3 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
9. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure: Not applicable
Specific Gravity/Density: 1.0 – 1.3
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content: Not available
Flash Point: >210 C 410 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not applicable
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not available
Kst (bar-m/sec): Not available
Maximum Explosion Pressure (Pmax): Not available
Dust Class: Not available
Minimum Ignition Energy (MIE) (mJ): Not available
Minimum Ignition Temperature (MIT) ( C): Not available
Minimum Explosive Concentration (MEC) (g/m
3
): Not available
Limiting Oxygen Concentration (LOC) (%): Not available
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Polymerization: Will not occur
Materials To Avoid: No hazardous reactions known.
Hazardous Decomposition
Products:
aldehydes
Carbon dioxide
hydrogen cyanide (HCN)
nitrogen oxides
hydrocarbons
nitriles
Carbon monoxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
Page 4 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
This product contains no OSHA regulated (hazardous) components.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
rat
Acute Irritation
Acute LD50
skin Not irritating
Page 5 of 7
.Not an expected route of
exposure
Acute Irritation eye
STRETCH-VAC 250
Not an expected route of
exposure
dermal
SDS: 0062099
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2000 mg/kg
Not an expected route of
exposure
Date Prepared: 08/15/2018
inhalation
oral
No Hazardous Ingredients
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Date Prepared: 08/15/2018 Page 6 of 7STRETCH-VAC 250 SDS: 0062099
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: New Product
Date Prepared: 08/15/2018
Date of last significant revision:08/14/2018
verification. Before using any product, read its label.
Date Prepared: 08/15/2018 Page 7 of 7STRETCH-VAC 250 SDS: 0062099
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
by | Sep 27, 2025
SDS: 0062099
Date Prepared: 08/15/2018
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: STRETCH-VAC 250
Synonyms: None
Chemical Family: Polyurethane Film
Molecular Weight: Not applicable
Intended/Recommended Use: Film
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
By excessive exposure to dust, eye and respiratory tract irritation is possible.
Polymerization may occur from excessive heat, contamination or exposure to direct sunlight.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
No Hazardous Ingredients
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray, carbon dioxide or dry chemical.
Extinguishing Media to Avoid:
full water jet
Protective Equipment:
Wear full firefighting protective clothing.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018 Page 2 of 7
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: Heating or curing of unused rolls or sheets of product prior to disposal is not
recommended. Heating a large mass of product can lead to a rapid decomposition reaction, generating heat,
smoke and possibly fire.
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Room temperature
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed. Barrier creams may help to protect the exposed areas of the skin, they should however not be
applied once exposure has occurred.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: blue
Appearance: plastic bags
Odor: odorless
Boiling Point: Not available
Melting Point: 150 – 200 C 302 – 392 F
Page 3 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
9. PHYSICAL AND CHEMICAL PROPERTIES
Vapor Pressure: Not applicable
Specific Gravity/Density: 1.0 – 1.3
Vapor Density: Not available
Percent Volatile (% by wt.): Not available
pH: Not available
Saturation In Air (% By Vol.):Not available
Evaporation Rate: Not available
Solubility In Water: Insoluble
Volatile Organic Content: Not available
Flash Point: >210 C 410 F
Flammability (solid, gas): Not available
Flammable Limits (% By Vol): Not available
Autoignition (Self) Temperature:Not applicable
Decomposition Temperature: Not available
Partition coefficient (n-
octanol/water):
Not available
Odor Threshold: Not available
Viscosity (Kinematic): Not available
DUST HAZARD INFORMATION
Particle Size (microns): Not available
Kst (bar-m/sec): Not available
Maximum Explosion Pressure (Pmax): Not available
Dust Class: Not available
Minimum Ignition Energy (MIE) (mJ): Not available
Minimum Ignition Temperature (MIT) ( C): Not available
Minimum Explosive Concentration (MEC) (g/m
3
): Not available
Limiting Oxygen Concentration (LOC) (%): Not available
10. STABILITY AND REACTIVITY
Reactivity: No information available
Stability: Stable
Polymerization: Will not occur
Materials To Avoid: No hazardous reactions known.
Hazardous Decomposition
Products:
aldehydes
Carbon dioxide
hydrogen cyanide (HCN)
nitrogen oxides
hydrocarbons
nitriles
Carbon monoxide
11. TOXICOLOGICAL INFORMATION
PRODUCT TOXICITY INFORMATION
Likely Routes of Exposure: Skin.
ACUTE TOXICITY DATA
Page 4 of 7STRETCH-VAC 250 SDS: 0062099 Date Prepared: 08/15/2018
LOCAL EFFECTS ON SKIN AND EYE
ALLERGIC SENSITIZATION
GENOTOXICITY
Assays for Gene Mutations
OTHER INFORMATION
The product toxicity information above has been estimated.
HAZARDOUS INGREDIENT TOXICITY DATA
This product contains no OSHA regulated (hazardous) components.
12. ECOLOGICAL INFORMATION
TOXICITY, PERSISTENCE AND DEGRADABI LITY, BIOACCUMULATIVE POTENTIAL, MOBILITY IN SOIL, OTHER
ADVERSE EFFECTS
This material is not classified as dangerous for the environment.
Environmental exposure from substances of this preparation are limited due to the physical form of the product.
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr .Not an expected route of
exposure
rat
Acute Irritation
Acute LD50
skin Not irritating
Page 5 of 7
.Not an expected route of
exposure
Acute Irritation eye
STRETCH-VAC 250
Not an expected route of
exposure
dermal
SDS: 0062099
Sensitization
rabbit
skin Not sensitizing
Acute LD50
Sensitization respiratory
.>2000 mg/kg
Not an expected route of
exposure
Date Prepared: 08/15/2018
inhalation
oral
No Hazardous Ingredients
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
European Economic Area (including EU): This product is an article that does not intentionally release substances
under normal conditions of use and is therefore exempt from the registration requirements under the REACH
Regulation (EC) No. 1907/2006.
Date Prepared: 08/15/2018 Page 6 of 7STRETCH-VAC 250 SDS: 0062099
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: New Product
Date Prepared: 08/15/2018
Date of last significant revision:08/14/2018
verification. Before using any product, read its label.
Date Prepared: 08/15/2018 Page 7 of 7STRETCH-VAC 250 SDS: 0062099
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
by | Sep 27, 2025
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: Release Fabrics/Peel Plies
Release Ease 234 TFP, Release Ease 234 TFP-HP, Release Ease 234 TFP-1, Release
Ease 234 TFNP, Release Ease 236 TFNP, TFG075 series, TFG125 series, TFG250 series
Relevant identified uses of the substance or mixture and uses advised against
General use: Article: Release fabrics/ Peel plies
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Department responsible for
information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Department responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Airtech Advanced Materials UK Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.airtech-amg.co.uk
Telephone: +44 161.947.1610
Department responsible for
information:
Telephone: +44 161.947.1610
E-mail: sales@airtech-amg.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Department responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Form: solid
Color: varying
Odor: odorless
Classification: Article not subject to hazard labelling or classification.
Regulatory status
This material is not considered hazardous by the U.S. OSHA Hazard Communication Standard
(29 CFR 1910.1200).
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 2 of 8
Hazards not otherwise classified
Toxic fumes may be emitted at elevated temperatures. Do not breathe vapor. Inhalation of fumes
from burning or heating may cause polymer fume fever, a temporary flu-like illness with fever
and chills. Processing, e.g. by cutting, sawing or grinding, can produce particles and dust. Avoid
inhalation of dusts, as even inert dusts may functionally affect respiratory organs.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Article: Release fabrics/ Peel plies
Material type: PTFE coated fibreglass fabric
Release Coating: PTFE
4. First aid measures
In case of inhalation: In case of inhalation of decomposition products, affected person should be moved into fresh air
and kept still. If the casualty has difficulty breathing, call a doctor immediately.
Following skin contact:Thoroughly wash skin with soap and water. In case of skin irritation, consult a physician.
After eye contact: In the event of irritation from processing vapors: Immediately flush eyes with plenty of flowing
water for 10 to 15 minutes holding eyelids apart. In case of troubles or persistent symptoms,
consult an opthalmologist.
After swallowing: Not a probable route of exposure.
In the case of the formation of dust: Rinse mouth. Seek medical treatment in case of troubles.
Most important symptoms/effects, acute and delayed
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released mist or
vapors can irritate the respiratory tracts.
Inhalation of fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical irritation.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:No data available
Auto-ignition temperature:No data available
Suitable extinguishing media:Water spray jet, dry chemical powder, foam, carbon dioxide
Extinguishing media which must not be used for safety reasons:
Full water jet.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 3 of 8
Specific hazards arising from the chemical
This material is combustible, but will not ignite readily. Toxic fumes may be emitted at elevated
temperatures.
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear a self-contained breathing apparatus and chemical protective clothing.
Additional information:Seal off endangered area. Cool endangered containers with water spray and, if possible,
remove from danger zone. Use water spray jet to knock down vapors. Do not breathe fumes. Do
not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions: Handle in accordance with good industrial hygiene and safety practice.
At processing: Avoid the formation of aerosol/vapors. Avoid generation of dust. Avoid inhalation
and contact with skin and eyes. Wear appropriate protective equipment. Keep unprotected
people away. Ensure adequate ventilation, especially in confined areas.
Environmental precautions:Do not allow to penetrate into soil, waterbodies or drains.
Methods for clean-up: Take up mechanically, placing in appropriate containers for disposal. Dispose of waste
according to applicable legislation.
7. Handling and storage
Handling
Advices on safe handling:Handle in accordance with good industrial hygiene and safety practice.
At processing: Provide adequate ventilation, and local exhaust as needed. Avoid the formation
of aerosol/vapors. Avoid generation of dust. Avoid inhalation and contact with skin and eyes.
Wear appropriate protective equipment. Keep unprotected people away. When using do not eat,
drink or smoke.
Precautions against fire and explosion:
Take standard precautions to prevent fire.
Storage
Requirements for storerooms and containers:
Keep in a cool place. Keep container dry. Protect from direct sunlight. Do not freeze. Store at
room temperature.
Hints on joint storage:Incompatible materials: Strong bases, strong acids, strong oxidizing agents.
Keep away from food and drinks.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 4 of 8
Engineering controls
Provide good ventilation and/or an exhaust system in the work area.
In case of development of vapors or dust (at processing): Use local exhaust.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection: At processing (recommended): Safety glasses in accordance with OSHA 29 CFR: 1910.133 or
ANSI Z87.1-2010.
Skin protection: At processing (recommended): Wear suitable protective clothing.
Recommendation:
Protective gloves according to OSHA Standard – 29 CFR: 1910.138.
Glove material: nitrile rubber (0.11 mm)
Breakthrough time: 480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Respiratory protection is not necessary if room is well ventilated.
At processing:
When vapors form, use respiratory protection. The filter class must be suitable for the
maximum contaminant concentration (gas/vapor/aerosol/particulates) that may arise when
handling the product. If the concentration is exceeded, self-contained breathing apparatus must
be used.
General hygiene considerations:Handle in accordance with good industrial hygiene and safety practice. Wash hands before
breaks and after work. When using do not eat, drink or smoke.
At processing:
Avoid contact with skin, eyes, and clothing. Do not breathe vapors. Do not breathe dust.
Environmental exposure controls
Refer to 6.: Section “Environmental precautions”.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: solid
Color: varying
Odor: odorless
Odor threshold: No data available
pH: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range: No data available
Flash point/flash point range: No data available
Evaporation rate: No data available
Flammability: This material is combustible, but will not ignite readily.
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: insoluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to section: Possibility of hazardous reactions.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No dangerous reactions with proper and specified storage and handling
Conditions to avoid: Keep away from heat. Protect from direct sunlight. Avoid generation of dust. Avoid the formation
of aerosol/vapors.
Incompatible materials:Strong bases, strong acids, strong oxidizing agents.
Hazardous decomposition products:
In case of strong heating / In case of fire may be liberated: Hydrogen fluoride, Carbonyl
difluoride, Tetrafluoroethylene, Hexafluoropropylene, Perfluoroisobutylene, carbon monoxide
and carbon dioxide.
Thermal decomposition: No data available
11. Toxicological information
Toxicological tests
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Toxic fumes may be emitted at elevated temperatures. Processing, e.g. by cutting, sawing or
grinding, can produce particles and dust. Dust may irritate airways and cause bronchitis
symptoms.
Hazardous decomposition products:
Hydrogen fluoride, Hexafluoropropene, Carbonyl difluoride.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 6 of 8
Symptoms
In case of inhalation:
Inhalation of dust may cause irritation of the respiratory system. Overheating released mist or
vapors can irritate the respiratory tracts.
Inhalation of fumes from burning or heating may cause polymer fume fever, a temporary flu-like
illness with fever and chills.
The following symptoms may occur: Irritation of nose, throat, lung cough, discomfort, shortage
of breath, headache, dizziness, nausea, vomiting. Symptoms usually appear after 2 hours and
decline within the next 36 to 48 hours. In case of prolonged exposure: Possible danger of
damage to liver and kidneys.
After contact with skin: itching redness of the skin and oedema (swelling).
The melted product can cause severe burns.
After eye contact:
Process vapors can irritate the eyes. Dust contact with the eyes can lead to mechanical irritation.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: Product is not biodegradable.
Additional ecological information
General information: Avoid release to the environment.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the
same way as the substance itself. Non-contaminated packages may be recycled. Do not
remove label until container is thoroughly cleaned.
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:not applicable
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 7 of 8
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
This product is an article as defined by TSCA regulations, and is exempt from TSCA inventory
listing requirements.
National regulations – Great Britain
Hazchem-Code: –
16. Other information
Hazard rating systems:
1
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 1 (Slight)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 1
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 1 (Slight)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TRGS: Technical Rules for Hazardous Substances
TSCA: Toxic Substance Control Act
vPvB: Very persistent and very bioaccumulative
Reason of change: General revision
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
Safety information sheet
Voluntary product information following the Safety Data Sheet format
Release Fabrics/Peel Plies
Material number 1091
Revision date: 5/12/2023
Version: 5.2
Replaces version: 5.1
Language: en-US
Date of first version:7/27/2015
Page: 8 of 8
Department issuing data sheet
Contact person: see section 1: Department responsible for information
This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional
precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate
workplace instructions and training programs for employees.
As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this
safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT
by | Sep 27, 2025
Safety Data Sheet Revision date: 6 /03/2019
Page 1 of 3
SECTION 1: IDENTIFICATION
PRODUCT IDENTIFIER: COMMON NAME: WOVEN FABRIC
PRODUCT STYLE: 50276- 060-XXXX
PRODUCT SUPPLIER: PRECISION FABRICS GROUP INC.,
301 E. MEADOWVIEW ROAD
GREENSBORO, NC 27406.
TELEPHONE: 336-510-3116
SECTION 2: HAZARD IDENTIFICATION
This product is not considered hazardous by the criteria described in the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
COMPONENT CAS NO. CONCENTRATION
WOVEN FINSIHED FABRIC 100%
SECTION 4: FIRST AID MEASURES
This material does not require first aid measures. Contact physician if symptoms persist. Flush area of
irritation thoroughly with water.
SECTION 5: FIRE FIGHTING MEASURES
Extinguishing media: Use water mist, carbon dioxide, dry chemical, or foam extinguishing media. Use
extinguishing measures that are appropriate to local circumstances and the surrounding environment.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions: None
Environmental precautions: Do not let product enter drains or landfill. Recycle if possible.
Methods for cleaning up: Avoid dust formation. Use general industrial approved methods.
Reference to other sections: Not relevant for article.
Safety Data Sheet Revision date: 6 /03/2019
Page 2 of 3
SECTION 7: HANDLING AND STORAGE
Precautions for safe handling
Safe handling : Avoid dust formation.
Safe storage : Avoid direct sunlight. Follow general ventilation rule.
Specific end uses : Not relevant for article.
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
Control parameters : Not relevant for article.
Eye Protection : Safety glasses with side-shields.
Hygiene measure : Not relevant for article.
Respiratory protection : Not relevant for article.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Form : Solid Fabric.
Color : Various
Odor : Odorless
Melting Point : > 450 F
Boiling Point : Not Applicable
Flash Point : Not Applicable
Other Physical Properties : Not Applicable to article
SECTION 10: STABILITY AND REACTIVITY
Chemical stability : Stable.
Incompatibility : Avoid contact of strong oxidizing agents, Acids and Bases.
Safety Data Sheet Revision date: 6 /03/2019
Page 3 of 3
SECTION 11: TOXICOLOGICAL INFORMATION
No toxicological data has been found on this article in the reasonable search of scientific literature.
SECTION 12: ECOLOGICAL INFORMATION
No ecological data has been found on this article in the reasonable search of scientific literature.
SECTION 13: DISPOSAL CONSIDERATIONS
Any disposal practice must be in compliance with all local, state, and federal laws and regulations.
SECTION 14: TRANSPORT INFORMATIONS
None applied to this article.
SECTION 15: REGULATORY INFORMATION
OSHA Hazard communication rule, 29 CFR 1910.1200: This article is not considered hazardous. This
article is considered non-hazardous under SARA Title III, does not contain any substance under California
Proposition 65, all of the ingredients of this article on the TSCA inventory list.
SECTION 16: OTHER INFORMATION
HMIS Hazard Ratings: Fire: 1 Reactivity: 0 Physical Hazard: 0
Information presented herein has been compiled from sources considered to be dependable and is
accurate and reliable to the best of the knowledge and belief of Precision Fabrics Group, Inc., but is not
guaranteed to be so. SINCE CONDITIONS OF USE ARE BEYOND THE CONTROL OF PRECISION FABRICS
GROUP, INC., NOWARRANTIES ARE MADE, EXPRESSED OR IMPLIED, EXCEPT THOSE THAT MAY BE
CONTAINED IN THE WRITTEN CONTRACT OF SALE OR ACKNOWLEDGMENT. It is the user’s responsibility
to determine the suitability of this material for a specific purpose and to adopt such safety precautions
as may be necessary.
by | Sep 27, 2025
MATERIAL SAFETY DATA SHEET
Page 1 of 7
STRETCH-VAC 2000
1. PRODUCT AND COMPANY NAME
PRODUCT NAME: STRETCH-VAC 2000
DESCRIPTION: Soft Co-Extruded Nylon with Ultra High Elongation
MANUFACTURER: Cytec Process Materials
12801 Ann Street
Santa Fe Springs, CA 90670
FOR MORE INFORMATION CALL: 562-906-3300
IN CASE OF EMERGENCY CALL: 562-906-3300
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient Name
CAS # % of Ingredient
Nylon 6 Homopolymer (CAS 25038-54-4) 30-70%
Nylon 6,6/6 Copolymer (CAS 24993-04-2) 10-40%
Thermoplastic Elastomer (CAS Trade Secret) 10-40%
Colorants and Stabilizers (CAS Trade Secret) 0-3%
Trace impurities and additional material names not listed above may also appear in Section 15
towards the end of the MSDS. These materials may be listed for local “Right-To-Know” compliance
and for other reasons.
MATERIAL SAFETY DATA SHEET
Page 2 of 7
3. HAZARD IDENTIFICATION
POTENTIAL HEALTH HAZARDS
Route of Entry: N/A
Target Organs: N/A
Inhalation: Not a route of exposure under normal usage. Elevated processing
temperatures may release irritating vapors.
Skin Contact: Not considered hazardous.
Eye Contact: Not considered hazardous. It may cause mechanical irritation if film
comes into contact with the eye.
Ingestion: Not a route of exposure. Not considered hazardous.
4. FIRST AID MEASURES
Inhalation: None needed under normal usage. If exposed to vapors at elevated
processing temperatures, remove to fresh air.
Skin Contact: None needed
Eye Contact: None needed under normal usage. If material comes into contact with
the eye, flush eyes with water while holding eyelids apart to ensure
complete irrigation.
Ingestion: None needed.
MATERIAL SAFETY DATA SHEET
Page 3 of 7
5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
Ignition Temperature: > 770 F (410 C)
Decomposition Temperature: > 527 F (275 C)
LEL: N/A
UEL: N/A
Extinguishing Method: Carbon dioxide, dry chemical, foam, water or other agents
as appropriate for materials in surrounding fire
Special Fire Fighting Procedures: Wear NIOSH/MSHA approved positive pressure self-
contained breathing apparatus and full protective clothing.
Unusual Fire and Explosion Hazards: Gaseous products may be evolved if the film is heated to
very high temperatures and they should be regarded as
hazardous.
6. ACCIDENTAL RELEASE MEASURES
Always wear recommended personal protective equipment. Collect and place in a solid waste
container.
7. HANDLING AND STORAGE
Handling Precautions: Use normal personal hygiene and good housekeeping
Storage Requirements: Store in a cool, dry area, away from direct heat or sunlight
MATERIAL SAFETY DATA SHEET
Page 4 of 7
8. EXPOSURE CONTROL/PERSONAL PROTECTION
Engineering Controls: Use general room ventilation plus local exhaust at points of fume
generation to maintain exposure below the PEL/TLV exposure
limits.
Protective Equipment: Use heat resistant gloves if handling melted material. As a general
practice in manufacturing areas, safety glasses that conform to
ANSI Z87.1 should be worn. A NIOSH/MSHA approved respirator
should be worn in areas where the PEL/TLV is exceeded.
Exposure Guideline/Other:
Ingredient
Guideline Form of
Exposure
Value Concentration
Caprolactam
(105-60-2)
ACGIH:US ACGIH
Threshold Limit
Value
Inhalable
fraction
and vapor
TWA
(Time Weighted
Average)
5 mg/m3
NIOSH/GUIDE:US Dust STEL
(Short Term
Exposure Limit)
3 mg/m3
NIOSH/GUIDE:US Dust REL
(Recommended
Exposure Limit)
1 mg/m3
NIOSH/GUIDE:US Vapor STEL
(Short Term
Exposure Limit)
3 mg/m3
(0.66 ppm)
NIOSH/GUIDE:US Vapor REL
(Recommended
Exposure Limit)
1 mg/m3
(0.22 ppm)
Z1A:US OSHA
Table Z-1-A (29
CFR 1910.1000)
Vapor TWA
(Time Weighted
Average)
20 mg/m3
(5 ppm)
Z1A:US OSHA
Table Z-1-A (29
CFR 1910.1000)
Dust TWA
(Time Weighted
Average)
1 mg/m3
Z1A:US OSHA
Table Z-1-A (29
CFR 1910.1000)
Vapor STEL
(Short Term
Exposure Limit)
40 mg/m3
Z1A:US OSHA
Table Z-1-A (29
CFR 1910.1000)
Dust STEL
(Short Term
Exposure Limit)
3 mg/m3
MATERIAL SAFETY DATA SHEET
Page 5 of 7
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear or colored plastic film
Physical Status: Solid
Odor: No odor
pH: N/A
Vapor Pressure: N/A
Vapor Density: N/A
Boiling Point: N/A
Freezing/Melting Point: Not determined
Solubility: Negligible
Spec. Grav./Density: 0.9 – 1.1
10. STABILITY AND REACTIVITY
Stability: Normally Stable
Conditions to avoid: Avoid exposure to open flame or temperatures
exceeding recommended processing temperatures.
The maximum temperature to which the film can be
exposed will vary with exposure (dwell) time. Cytec
should be contacted if questions arise concerning
specific processing conditions.
Materials to avoid (Incompatibility): Strong oxidizers.
Hazardous Decomposition Products: Thermal decomposition products may include
Caprolactam, Ammonia, hydrogen cyanide
(hydrocyanic acid), carbon monoxide, carbon dioxide,
unburned hydrocarbons (Smoke), and combustion by-
products (oxidized and non-oxidized hydrocarbons).
Hazardous Polymerization: Will not occur
11. TOXICOLOGICAL INFORMATION
Immediate (Acute) Effects: Not determined
Delayed (Sub-chronic and chronic) Effects: None known
Other Data: None
MATERIAL SAFETY DATA SHEET
Page 6 of 7
12. ECOLOGICAL INFORMATION
Material is considered inert and not expected to be biodegradable or toxic
13. DISPOSAL CONSIDERATIONS
Dispose of in compliance with Federal, state and local government regulations. Usually is
considered an inert packaging material that can be recycled or landfilled.
14. TRANSPORT INFORMATION
US DOT Hazard Class: Not regulated
US DOT ID Number: Not applicable
For additional information on shipping regulations affecting this material, contact the information
number found in Section 1.
15. REGULATORY INFORMATION
Control Act (TSCA)
TSCA Inventory Status: All components are listed on the TSCA Inventory.
Other TSCA Issues: None
SARA Title III/CERCLA
“Reportable Quantities” (RQs) and/or “Threshold Planning Quantities” (TPQs) exist for the
following ingredients.
Ingredient Name
SARA/CERCLA RO (lb) SARA EHS TPO (lb)
No ingredients listed in this section.
Spills or releases resulting in the loss of any ingredient at or above its RQ require
immediate notification to the National Response Center (1-800-424-8802) and to your
Local Emergency Planning Committee.
MATERIAL SAFETY DATA SHEET
Page 7 of 7
Section 311 Hazard Class: None
The following ingredients are SARA 313 “Toxic Chemicals”. CAS numbers and weight percents
are found in Section 2.
Ingredient Name
Comment
No ingredients listed in this section.
State Right-To-Know
In addition to the ingredients found in Section 2, the following are listed for state right-to-know
purposes.
Ingredient Name
Weight % Comment
N/A
New Jersey RTK : -Caprolactam (105-60-2)
Pennsylvania RTK: -Caprolactam (105-60-2)
Additional Regulatory Information
This product is not intended to be used in any application which places the product in direct
contact with the human body, or in other FDA governed applications, unless specifically
designated otherwise in written material supplied by Cytec to the purchaser.
WHMIS Classification (Canada):
Not a controlled substance. (Considered to be a manufactured article). Does not need to be
labeled according to CPR Criteria.
Foreign Inventory Status:
Not determined.
16. OTHER INFORMATION
Current Issue Date: 02/13/2013
Previous Issue Date: 10/04/2010
by | Sep 27, 2025
SAFETY DATA SHEET1. IdentificationPR PTFE coated Fiberglass Release FabricProduct identifierOther means of identification8000608Product code200TFNP * 200TFP * 200TFP-1 * 210TFNP * FF025OW * FF030OW * FF03A * FF03AP *FF03PM * FF05A * FF05AP * FF05PM * FF06AAP * FF06AP * FF10A * FF10AP * FF10PMSynonymsRelease FabricRecommended useNone known.Recommended restrictionsManufacturer/Importer/Supplier/Distributor informationManufacturerAerovac LLCCompany Name955-10 National Parkway, Schaumburg, IL 60173-5161, United States+1-847-437-0200 (International)Aerovac Mondovi S.r.LVia Vigevano 1, Mondov , CN 12084, Italy+39 (0) 174 566200Aerovac Toulouse SAS1 rue de la Sausse, Saint-Jean, 31240, France+33 (0) 5 61 378989Aerovac Keighley Ltd500 Bradford Road, Sandbeds, Keighley, BD20 5 NG, United Kingdom+44 (0) 1274 550500hse@compositesone.comE-mailCHEMTRECEmergency TelephoneUS: 1-800-424-9300Europe: +44 20 3885 0382South America: +55 11 4349 1359International: +1-703-527-38872. Hazard(s) identificationNot a hazardous product according to Globally Harmonized System (GHS)3. Composition/information on ingredientsNot applicable, this product is an article.4. First-aid measuresMove to fresh air. Call a physician if symptoms develop or persist.InhalationWash off with soap and water. Get medical attention if irritation develops and persists.Skin contactRinse with water. Get medical attention if irritation develops and persists.Eye contactRinse mouth. Get medical attention if symptoms occur.IngestionDirect contact with eyes may cause temporary irritation.Most importantsymptoms/effects, acute anddelayedTreat symptomatically.Indication of immediatemedical attention and specialtreatment needed1 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Ensure that medical personnel are aware of the material(s) involved, and take precautions toprotect themselves.General information5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing mediaDuring fire, gases hazardous to health may be formed.Specific hazards arising fromthe chemicalSelf-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefightersUse water spray to cool unopened containers.Fire fightingequipment/instructionsUse standard firefighting procedures and consider the hazards of other involved materials.Specific methodsNo unusual fire or explosion hazards noted.General fire hazards6. Accidental release measuresKeep unnecessary personnel away. For personal protection, see section 8 of the SDS.Personal precautions,protective equipment andemergency proceduresStop the flow of material, if this is without risk. Following product recovery, flush area with water.For waste disposal, see section 13 of the SDS.Methods and materials forcontainment and cleaning upAvoid discharge into drains, water courses or onto the ground.Environmental precautions7. Handling and storageObserve good industrial hygiene practices.Precautions for safe handlingStore in tightly closed container. Store away from incompatible materials (see Section 10 of theSDS).Conditions for safe storage,including any incompatibilities8. Exposure controls/personal protectionThis substance has no PEL, TLV, or other recommended exposure limit.Occupational exposure limitsNo biological exposure limits noted for the ingredient(s).Biological limit valuesGood general ventilation should be used. Ventilation rates should be matched to conditions. Ifapplicable, use process enclosures, local exhaust ventilation, or other engineering controls tomaintain airborne levels below recommended exposure limits. If exposure limits have not beenestablished, maintain airborne levels to an acceptable level.Appropriate engineeringcontrolsIndividual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles).Eye/face protectionSkin protectionWear appropriate chemical resistant gloves.Hand protectionWear suitable protective clothing.OtherIn case of insufficient ventilation, wear suitable respiratory equipment.Respiratory protectionWear appropriate thermal protective clothing, when necessary.Thermal hazardsAlways observe good personal hygiene measures, such as washing after handling the materialand before eating, drinking, and/or smoking. Routinely wash work clothing and protectiveequipment to remove contaminants.General hygieneconsiderations9. Physical and chemical properties AppearanceSolid.Physical stateSolid.FormNot available.ColorNot available.OdorOdor thresholdNot available.pHNot available.Melting point/freezing pointNot available.Initial boiling point and boilingrangeNot available.Flash pointNot available.2 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Evaporation rateNot available.Not available.Flammability (solid, gas)Upper/lower flammability or explosive limitsExplosive limit – lower (%)Not available.Explosive limit – upper (%)Not available.Vapor pressureNot available.Vapor densityNot available.Relative densityNot available.Solubility(ies)Solubility (water)Not available.Partition coefficient(n-octanol/water)Not available.Auto-ignition temperatureNot available.Decomposition temperatureNot available.ViscosityNot available.Other informationNot explosive.Explosive propertiesNot oxidizing.Oxidizing properties10. Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and transport.ReactivityMaterial is stable under normal conditions.Chemical stabilityNo dangerous reaction known under conditions of normal use.Possibility of hazardousreactionsContact with incompatible materials.Conditions to avoidStrong oxidizing agents.Incompatible materialsNo hazardous decomposition products are known.Hazardous decompositionproducts11. Toxicological informationInformation on likely routes of exposureInhalationNo adverse effects due to inhalation are expected.Skin contactNo adverse effects due to skin contact are expected.Eye contactDirect contact with eyes may cause temporary irritation.IngestionExpected to be a low ingestion hazard.Symptoms related to thephysical, chemical andtoxicological characteristicsDirect contact with eyes may cause temporary irritation.Information on toxicological effectsAcute toxicityNot known.Prolonged skin contact may cause temporary irritation.Skin corrosion/irritationDirect contact with eyes may cause temporary irritation.Serious eye damage/eyeirritationRespiratory or skin sensitizationRespiratory sensitizationNot a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitizationNo data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.Germ cell mutagenicityCarcinogenicityNot classifiable as to carcinogenicity to humans.IARC Monographs. Overall Evaluation of CarcinogenicityNot listed.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.3 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
US. National Toxicology Program (NTP) Report on CarcinogensNot listed.This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposureNot classified.Specific target organ toxicity -repeated exposureNot classified.Aspiration hazardNot an aspiration hazard.12. Ecological informationThe product is not classified as environmentally hazardous. However, this does not exclude thepossibility that large or frequent spills can have a harmful or damaging effect on the environment.EcotoxicityNo data is available on the degradability of this substance. Persistence and degradabilityNo data available.Bioaccumulative potentialNo data available.Mobility in soilOther adverse effectsNo other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site.Disposal instructionsDispose in accordance with all applicable regulations.Local disposal regulationsThe waste code should be assigned in discussion between the user, the producer and the wastedisposal company.Hazardous waste codeDispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Waste from residues / unusedproductsSince emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.Contaminated packaging14. Transport informationDOTNot regulated as dangerous goods.IATANot regulated as dangerous goods.IMDGNot regulated as dangerous goods.Not applicable.Transport in bulk according toAnnex II of MARPOL 73/78 andthe IBC Code15. Regulatory informationThis product is not known to be a “Hazardous Chemical” as defined by the OSHA HazardCommunication Standard, 29 CFR 1910.1200.US federal regulationsToxic Substances Control Act (TSCA)This substance is not on the TSCA 8(b) inventory or is designated inactive .TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1053)Not listed.SARA 302 Extremely hazardous substanceSuperfund Amendments and Reauthorization Act of 1986 (SARA)Not listed.No (Exempt)SARA 311/312 Hazardouschemical4 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
SARA 313 (TRI reporting)Not regulated.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Not regulated.Not regulated.Safe Drinking Water Act(SDWA)US state regulationsCalifornia Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This materialis not known to contain any chemicals currently listed as carcinogens or reproductive toxins. Formore information go to www.P65Warnings.ca.gov.International InventoriesCountry(s) or regionInventory nameOn inventory (yes/no)*NoAustraliaAustralian Inventory of Industrial Chemicals (AICIS)NoCanadaDomestic Substances List (DSL)NoCanadaNon-Domestic Substances List (NDSL)NoChinaInventory of Existing Chemical Substances in China (IECSC)NoEuropeEuropean Inventory of Existing Commercial ChemicalSubstances (EINECS)NoEuropeEuropean List of Notified Chemical Substances (ELINCS)NoJapanInventory of Existing and New Chemical Substances (ENCS)NoKoreaExisting Chemicals List (ECL)NoNew ZealandNew Zealand InventoryNoPhilippinesPhilippine Inventory of Chemicals and Chemical Substances(PICCS)NoTaiwanTaiwan Chemical Substance Inventory (TCSI)NoUnited States & Puerto RicoToxic Substances Control Act (TSCA) Inventory*A “Yes” indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A “No” indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revision06-15-2023Issue date08-23-2023Revision dateVersion #02Health: 0Flammability: 0Instability: 0NFPA ratingsNFPA ratings 0005 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
Aerovac LLC cannot anticipate all conditions under which this information and its product, or theproducts of other manufacturers in combination with its product, may be used. It is the user sresponsibility to ensure safe conditions for handling, storage and disposal of the product, and toassume liability for loss, injury, damage or expense due to improper use. The information in thesheet was written based on the best knowledge and experience currently available. Informationcontained herein is believed to be true and accurate, but all statements or suggestions are madewithout warranty, expressed or implied, regarding accuracy of the information, the hazardsconnected with the use of the material or the results to be obtained from the use thereof.Compliance with all applicable federal, state and local laws and local regulations remains theresponsibility of the user. This safety data sheet cannot cover all possible situations which the usermay experience during processing. Each aspect of your operation should be examined todetermine if, or where, additional precautions may be necessary. All health and safety informationcontained in this safety data sheet should be provided to your employees or customers. It is yourresponsibility to develop appropriate work practice guidelines and employee instructional programsfor your operation.DisclaimerProduct and Company Identification: SynonymsRevision information6 / 6Material name: PR PTFE coated Fiberglass Release Fabric8000608 Version #: 02 Revision date: 08-23-2023 Issue date: 06-15-2023SDS US
by | Sep 27, 2025
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
1 / 15
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
– Trade nameHALAR 902- Chemical nameCopolymer of ethylene and chlorotrifluoroethylene- SynonymsECTFE
1.2 Relevant identified uses of the substance or mixture and uses advised against
Uses of the Substance / Mixture
– For industrial use only
1.3 Details of the supplier of the safety data sheet
Company
SOLVAY SPECIALTY POLYMERS USA, LLC
4500 McGINNIS FERRY ROAD
30005-3914, ALPHARETTA
USA
Tel: +1-770-7728200
Fax: +1-770-7728213
Product Information:
+1-800-2210553
1.4 Emergency telephone
FOR EMERGENCIES INVOLVING A SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT, CONTACT CHEMTREC (24-Hour
Number): 800-424-9300 within the United States and Canada, or 703-527-3887 for international collect calls.
SECTION 2: Hazards identification
Although OSHA has not adopted the environmental portion of the GHS regulations, this document may include information on
environmental effects.
2.1 Classification of the substance or mixture
HCS 2012 (29 CFR 1910.1200)
Combustible dustMay form combustible dust concentrations in air.
2.2 Label elements
HCS 2012 (29 CFR 1910.1200)
Signal Word
– Warning
Hazard Statements
– May form combustible dust concentrations in air.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
2 / 15
2.3 Other hazards which do not result in classification
– This product as shipped is not a combustible dust, however if small particles are generated during further processing,
handling or by other means, combustible dust concentrations may form in the air.
SECTION 3: Composition/information on ingredients
3.1 Substance
– Not applicable, this product is a mixture.
3.2 Mixture
– SynonymsECTFE
Hazardous Ingredients and Impurities
– No ingredients are hazardous.
Non Hazardous Ingredients and Impurities
Chemical name
Identification number
CAS-No.
Concentration [%]
Ethene,chlorotrifluoro-,polymer with ethene25101-45-5 >= 99
SECTION 4: First aid measures
4.1 Description of first-aid measures
In case of inhalation
– Remove the subject from dusty environment and let him blow his nose.
Exposure to decomposition products
– Move to fresh air.
– Oxygen or artificial respiration if needed.
– Symptoms of poisoning may develop many hours after exposure.
– Keep under medical supervision for at least 48 hours.
In case of skin contact
– Wash off with soap and water.
Exposure to decomposition products
– Wash off with soap and water.
– If fingers/finger nails are touched, even if there is no pain, dip them in a bath of 5% calcium gluconate for 15 to 20
minutes.
– Consult a physician.
In case of eye contact
– In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Exposure to decomposition products
– Rinse immediately with plenty of water, also under the eyelids.
– Remove contact lenses.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
3 / 15
In case of ingestion
– If large quantities of this material are swallowed, call a physician immediately.
– Never give anything by mouth to an unconscious person.
4.2 Most important symptoms and effects, both acute and delayed
In case of inhalationEffects
– Mechanical irritation from the particulates generated by the product.
– The thermal decomposition vapors of fluorinated polymers may cause polymer fume fever with flu-like symptoms in
humans, especially when smoking contaminated tobacco.
Symptoms
– Headache
– Shortness of breath
– Cough
In case of skin contactEffects
– Mechanical irritation from the particulates generated by the product.
Symptoms
Exposure to decomposition products
– Irritation
– Redness
– Burn
In case of eye contactEffects
– Mechanical irritation from the particulates generated by the product.
Symptoms
Exposure to decomposition products
– Irritation
– Redness
– Burn
In case of ingestionEffects
– Low ingestion hazard.
4.3 Indication of any immediate medical attention and special treatment needed
– no data available
SECTION 5: Firefighting measures
Flash pointThe product is not flammable. Autoignition temperatureNo data availableFlammability / Explosive limitNo data available
5.1 Extinguishing media
Suitable extinguishing media
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
4 / 15
– Water
– powder
– Foam
– Dry chemical
– Carbon dioxide (CO2)
Unsuitable extinguishing media
– None.
5.2 Special hazards arising from the substance or mixture
Specific hazards during fire fighting- The product is not flammable.
– Not explosive
– In case of fire hazardous decomposition products may be produced such as:
Hazardous combustion products:
– Gaseous hydrogen fluoride (HF).
– Fluorophosgene
– Gaseous hydrogen chloride (HCl).
– Other hazardous decomposition products may be formed.
5.3 Advice for firefighters
Special protective equipment for fire-fighters
– Wear self-contained breathing apparatus and protective suit.
– When intervention in close proximity wear acid resistant over suit.
Further information
– Evacuate personnel to safe areas.
– Approach from upwind.
– Protect intervention team with a water spray as they approach the fire.
– Keep containers and surroundings cool with water spray.
– Keep product and empty container away from heat and sources of ignition.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Advice for non-emergency personnel
– Prevent further leakage or spillage if safe to do so.
Advice for emergency responders
– Ensure adequate ventilation.
– Avoid dust formation.- Material can create slippery conditions.- Sweep up to prevent slipping hazard.- Keep away from open flames, hot surfaces and sources of ignition.
6.2 Environmental precautions
– Should not be released into the environment.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
5 / 15
– The product should not be allowed to enter drains, water courses or the soil.
– In case of accidental release or spill, immediately notify the appropriate authorities if required by Federal,
State/Provincial and local laws and regulations.
6.3 Methods and materials for containment and cleaning up
– Sweep up or vacuum up spillage and collect in suitable container for disposal.
6.4 Reference to other sections
– Refer to protective measures listed in sections 7 and 8.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
– Ensure adequate ventilation.
– Avoid dust formation.
– Use personal protective equipment.
– Do not contaminate tobacco products.
– Keep away from heat and sources of ignition.
– To avoid thermal decomposition, do not overheat.
– Take measures to prevent the build up of electrostatic charge.
– Clean and dry piping circuits and equipment before any operations.
– Ensure all equipment is electrically grounded before beginning transfer operations.
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– When using do not eat, drink or smoke.
– Wash hands before breaks and at the end of workday.
– Handle in accordance with good industrial hygiene and safety practice.
7.2 Conditions for safe storage, including any incompatibilities
Technical measures/Storage conditions
– Keep away from heat and sources of ignition.
– Keep in properly labeled containers.
– Keep away from combustible material.
– Keep away from heat/sparks/open flames/hot surfaces. No smoking.
– Keep away from incompatible products
– Provide tight electrical equipment well protected against corrosion.
– Refer to protective measures listed in sections 7 and 8.
Packaging material
Suitable material
– glass
– Metals
– Plastic materials.
– cardboard outer-packaging
7.3 Specific end use(s)
– Contact your supplier for additional information
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
6 / 15
SECTION 8: Exposure controls/personal protection
Introductory Remarks: These recommendations provide general guidance for handling this product. Because specific work
environments and material handling practices vary, safety procedures should be developed for each intended application. Assistance
with selection, use and maintenance of worker protection equipment is generally available from equipment manufacturers.
8.1 Control parameters
– Contains no substances with occupational exposure limit values.
Components with workplace occupational exposure limits
ComponentsValue typeValue BasisParticles not otherwise specified (PNOS)National Institute for Occupational Safety and
Health
Includes all inert or nuisance dusts, whether mineral, inorganic, not listed specifically in
1910.1000., See Appendix D – Substances with No Established RELs
Particles not otherwise specified (PNOS)TWA15 mg/m3Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
Form of exposure : total dust
All inert or nuisance dusts, whether mineral, inorganic, or organic, not listed specifically
by substance name are covered by the Particulates Not Otherwise Regulated (PNOR)
limit which is the same as the inert or nuisance dust limit of Table Z-3.
Particles not otherwise specified (PNOS)TWA5 mg/m3Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
Form of exposure : respirable fraction
All inert or nuisance dusts, whether mineral, inorganic, or organic, not listed specifically
by substance name are covered by the Particulates Not Otherwise Regulated (PNOR)
limit which is the same as the inert or nuisance dust limit of Table Z-3.
Particles not otherwise specified (PNOS)TWA10 mg/m3American Conference of Governmental
Industrial Hygienists
Form of exposure : Inhalable fraction
Particles not otherwise specified (PNOS)TWA3 mg/m3American Conference of Governmental
Industrial Hygienists
Form of exposure : Respirable fraction
Threshold limit values of by-products from thermal decomposition:
Components with workplace occupational exposure limits
ComponentsValue typeValue BasisHydrofluoric acidTWA3 ppm
2.5 mg/m3
National Institute for Occupational Safety and
Health
Hydrofluoric acidC6 ppm
5 mg/m3
National Institute for Occupational Safety and
Health
15 minute ceiling value
Hydrofluoric acidTWA3 ppmOccupational Safety and Health Administration
– Table Z-2
Z37.28-1969
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
7 / 15
Hydrofluoric acidTWA0.5 ppmAmerican Conference of Governmental
Industrial Hygienists
Danger of cutaneous absorption
Expressed as :Fluorine
Hydrofluoric acidC2 ppmAmerican Conference of Governmental
Industrial Hygienists
Danger of cutaneous absorption
Expressed as :Fluorine
Hydrofluoric acidOccupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
See Table Z-2Expressed as :Fluorine
Hydrofluoric acidPEL0.4 ppm
0.33 mg/m3
SkinExpressed as :Fluorine
Hydrofluoric acidSTEL1 ppm
0.83 mg/m3
SkinExpressed as :Fluorine
Carbonyl difluorideTWA2 ppmAmerican Conference of Governmental
Industrial Hygienists
Carbonyl difluorideSTEL5 ppmAmerican Conference of Governmental
Industrial Hygienists
Carbonyl difluorideTWA2 ppm
5 mg/m3
National Institute for Occupational Safety and
Health
Carbonyl difluorideST5 ppm
15 mg/m3
National Institute for Occupational Safety and
Health
Carbonyl difluoridePEL2 ppm
5 mg/m3
Carbonyl difluorideSTEL5 ppm
15 mg/m3
hydrogen chloride (gas)C2 ppmAmerican Conference of Governmental
Industrial Hygienists
hydrogen chloride (gas)C5 ppm
7 mg/m3
National Institute for Occupational Safety and
Health
Often used in an aqueous solution.
hydrogen chloride (gas)C5 ppm
7 mg/m3
Occupational Safety and Health Administration
– Table Z-1 Limits for Air Contaminants
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
8 / 15
The value in mg/m3 is approximate., Ceiling limit is to be determined from breathing-
zone air samples.
hydrogen chloride (gas)PEL0.3 ppm
0.45 mg/m3
hydrogen chloride (gas)C2 ppm
Biological Exposure Indices
ComponentsValue typeValue BasisHydrofluoric acidBEI2 mg/l
Fluoride
Urine
Prior to shift (16 hours
after exposure ceases)
American Conference of Governmental
Industrial Hygienists
Hydrofluoric acidBEI3 mg/l
Fluoride
Urine
End of shift (As soon as
possible after exposure
ceases)
American Conference of Governmental
Industrial Hygienists
8.2 Exposure controls
Control measures
Engineering measures
– Provide appropriate exhaust ventilation at machinery and at places where dust can be generated.
– Provide local ventilation appropriate to the product decomposition risk (see section 10).
– Refer to protective measures listed in sections 7 and 8.
– Apply technical measures to comply with the occupational exposure limits.
– For additional information, consult the current edition of The Guide to the Safe Handling of Fluoropolymers
published by the Society of Plastics Industry, Inc. (SPI) Fluoropolymer Division.
Individual protection measures
Respiratory protection
– When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
– Use respirator when performing operations involving potential exposure to vapor of the product.
– When respirators are required, select NIOSH/MSHA approved equipment based on actual or potential airborne
concentrations and in accordance with the appropriate regulatory standards and/or industrial recommendations.
– Comply with OSHA respiratory protection requirements.
– For additional information, consult the current edition of The Guide to the Safe Handling of Fluoropolymers
published by the Society of Plastics Industry, Inc. (SPI) Fluoropolymer Division.
Hand protection
– Wear protective gloves.
– Protective gloves – impervious chemical resistant:
Suitable material
– Nitrile rubber
– PVC
– Neoprene gloves
– butyl-rubber
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
9 / 15
– Take note of the information given by the producer concerning permeability and break through times, and of special
workplace conditions (mechanical strain, duration of contact).
Eye protection
– Safety glasses with side-shields
– In case of high-temperature processing
– Tightly fitting safety goggles
Skin and body protection
– Long sleeved clothing
– Safety shoes
Hygiene measures
– Ensure that eyewash stations and safety showers are close to the workstation location.
– When using do not eat, drink or smoke.
– Wash hands before breaks and at the end of workday.
– Handle in accordance with good industrial hygiene and safety practice.
SECTION 9: Physical and chemical properties
Physical and Chemical properties here represent typical properties of this product. Contact the business area using the Product
information phone number in Section 1 for its exact specifications.
9.1 Information on basic physical and chemical properties
Appearance
Form:
pellets
Physical state:
solid
Color:
white Odorodorless Odor ThresholdNo data availablepHNo data availableMelting point/freezing pointMelting point/range: 419 – 446 F (215 – 230 C) Initial boiling point and boiling rangeBoiling point/boiling range
Not applicable
Flash pointThe product is not flammable. Evaporation rate (Butylacetate = 1)No data availableFlammability (solid, gas)The product is not flammable.May form combustible dust concentrations in air.Flammability / Explosive limitNo data availableAutoignition temperatureNo data availableVapor pressureNo data availableVapor densityNo data availableDensity1.65 – 1.71 g/cm3
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
10 / 15
Relative densityNo data availableSolubilityWater solubility:
insoluble
Solubility in other solvents:
common organic solvents : insoluble
Partition coefficient: n-octanol/waterNo data availableDecomposition temperature> 572 F (> 300 C)ViscosityNo data availableExplosive propertiesNot explosiveOxidizing propertiesNot considered as oxidizing.
9.2 Other information
No data available
SECTION 10: Stability and reactivity
10.1 Reactivity
– No dangerous reaction known under conditions of normal use.
10.2 Chemical stability
– Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
– Under certain conditions, small dust-particles from the product may form flammable and explosive mixtures with the
air.
10.4 Conditions to avoid
– To avoid thermal decomposition, do not overheat.
– Keep away from flames and sparks.
10.5 Incompatible materials
– Combustible material
– Flammable materials
– Alkali metals (molten form)
10.6 Hazardous decomposition products
–
–
–
–
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
11 / 15
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
Acute oral toxicityNo data availableAcute inhalation toxicityNo data available
Acute dermal toxicityNo data availableAcute toxicity (other routes of
administration)
No data availableSkin corrosion/irritationNo data availableSerious eye damage/eye irritationNo data availableRespiratory or skin sensitizationNo data available
Mutagenicity
Genotoxicity in vitroNo data availableGenotoxicity in vivoNo data availableCarcinogenicityNo data available
This product does not contain any ingredient designated as probable or suspected human carcinogens by:
NTP
IARC
OSHA
ACGIH
Toxicity for reproduction and development
Toxicity to reproduction / fertilityNo data availableDevelopmental Toxicity/TeratogenicityNo data available
STOT
STOT-single exposureNo data availableSTOT-repeated exposureNo data availableExperience with human exposureNo data available
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
12 / 15
Aspiration toxicityNo data availableFurther informationDescription of possible hazardous to health effects is based on experience and/or
toxicological characteristics of several ingredients.
Product dust may be irritating to eyes, skin and respiratory system.
The thermal decomposition vapors of fluorinated polymers may cause polymer
fume fever with flu-like symptoms in humans, especially when smoking
contaminated tobacco.
Thermal decomposition can lead to release of toxic and corrosive gases.
The exposure to decomposition products causes severe irritation of eyes, skin
and mucous membranes.
SECTION 12: Ecological information
12.1 Toxicity
Aquatic Compartment
Acute toxicity to fish No data availableAcute toxicity to daphnia and other
aquatic invertebrates
No data available
Toxicity to aquatic plantsNo data available
Toxicity to microorganismsNo data availableChronic toxicity to fishNo data availableChronic toxicity to daphnia and
other aquatic invertebrates
No data available
12.2 Persistence and degradability
Abiotic degradationNo data availablePhysical- and photo-chemical
elimination
No data availableBiodegradationNo data available
12.3 Bioaccumulative potential
Partition coefficient: n-octanol/waterNo data available
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
13 / 15
Bioconcentration factor (BCF)No data available
12.4 Mobility in soil
Adsorption potential (Koc)No data availableKnown distribution to environmental
compartments
No data available
12.5 Results of PBT and vPvB assessment
No data available
12.6 Other adverse effects
No data availableRemarksEcological injuries are not known or expected under normal use.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product Disposal
– Do not dump into any sewers, on the ground, or into any body of water. All disposal methods must be in compliance with
all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations.
– Waste characterizations and compliance with applicable laws and regulations are the responsibility of the waste
generator.
– Can be incinerated, when in compliance with local regulations.
– The incinerator must be equipped with a system for the neutralization or recovery of HF.
Advice on cleaning and disposal of packaging
– Empty containers can be landfilled, when in accordance with the local regulations.
SECTION 14: Transport information
DOT
not regulated
TDG
not regulated
NOM
not regulated
IMDG
not regulated
IATA
not regulated
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
14 / 15
Note: The above regulatory prescriptions are those valid on the date of publication of this sheet. Given the possible evolution of
transportation regulations for hazardous materials, it would be advisable to check their validity with your sales office.
SECTION 15: Regulatory information
15.1 Notification status
Inventory InformationStatusUnited States TSCA Inventory-Canadian Domestic Substances List (DSL)-Australia Inventory of Chemical Substances (AICS)-Korea. Korean Existing Chemicals Inventory (KECI)-
imported by Solvay. Contact Solvay for
further details.
China. Inventory of Existing Chemical Substances in China (IECSC)-
imported by Solvay. Contact Solvay for
further details.
Japan. ISHL – Inventory of Chemical Substances-Japan. CSCL – Inventory of Existing and New Chemical Substances-Philippines Inventory of Chemicals and Chemical Substances (PICCS)-New Zealand. Inventory of Chemical Substances-EU. European Registration, Evaluation, Authorisation and Restriction of Chemical
(REACH)
–
Europe it is in compliance with REACH, if
not please contact the supplier.
Taiwan. Chemical Substance Inventory (TCSI)-
15.2 Federal Regulations
US. EPA EPCRA SARA Title III
Section 313 Toxic Chemicals (40 CFR 372.65)
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Section 302 Emergency Planning Extremely Hazardous Substance Threshold Planning Quantity (40 CFR 355)
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
Section 302 Emergency Planning Extremely Hazardous Substance Reportable Quantity (40 CFR 355)
This material does not contain any components with a SARA 302 RQ.
Section 304 Emergency Release Notification Reportable Quantity (40 CFR 355)
This material does not contain any components with a section 304 EHS RQ.
SAFETY DATA SHEET
HALAR 902
Revision Date 10/08/2018P00000019938
Version : 3.03 / US ( Z8 )
www.solvay.com
15 / 15
US. EPA CERCLA Hazardous Substances and Reportable Quantities (40 CFR 302.4)
This material does not contain any components with a CERCLA RQ.
15.3 State Regulations
US. California Safe Drinking Water & Toxic Enforcement Act (Proposition 65)
This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.
SECTION 16: Other information
Further information
– Product evaluated under the US GHS format.
Date Prepared:
Key or legend to abbreviations and acronyms used in the safety data sheet
– C Ceiling limit
– PEL Permissible exposure limit
– ST STEL – 15-minute TWA exposure that should not be exceeded at any time during a workday
– STEL Short term exposure limit
– TWA 8-hour, time-weighted average
-ACGIHAmerican Conference of Governmental Industrial Hygienists-OSHAOccupational Safety and Health Administration-NTPNational Toxicology Program-IARCInternational Agency for Research on Cancer-NIOSHNational Institute for Occupational Safety and Health
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information, and belief at the date of its
publication. Such information is only given as a guidance to help the user handle, use, process, store, transport, dispose, and release
the product in satisfactory safety conditions and is not to be considered as a warranty or quality specification. It should be used in
conjunction with technical sheets but do not replace them. Thus, the information only relates to the designated specific product and may
not be applicable if such product is used in combination with other materials or in any other manufacturing process, unless otherwise
specifically indicated. It does not release the user from ensuring he is in conformity with all regulations linked to its activity.
by | Sep 27, 2025
SDS: 0060050
Date Prepared: 02/06/2017
SAFETY DATA SHEET
1.IDENTIFICATION
Product Name: Polyimide Tape
Product Description: Tape
Synonyms: None
Chemical Family: Polyimide
Molecular Formula: Not available
Molecular Weight: Not available
Intended/Recommended Use: Tape
Other Product Names: POLY1, IT7170.
This SDS covers multiple products. For industrial exposure and emergency
response purposes, all listed products above have similar physical, chemical and
hazard properties.
2. HAZARDS IDENTIFICATION
GHS Classification
Not Classified
LABEL ELEMENTS
Not Applicable
Manufacturer/Supplier product and non-emergency information:
Aerovac LLC
955-10 National Parkway, Schaumburg, Il 60173, USA
800-621-8003 (USA/Canada), +1-847-437-0200 (International)
E-mail: hse@compositesone.com
Aerovac Mondov S.r.L.
Via Vigevano 1, 12084 Mondovi, ITALY
+39 (0) 174 566200
Aerovac Toulouse SAS
1 rue de la Sausse, 31240 Saint Jean, FRANCE
+33 (0) 5 61 378989
Aerovac Keighley Ltd
500 Bradford Road, Sandbeds, Keighley, BD20 5NG, UK
+44 (0) 1274 550500
Composites One Canada ULC
1100 Rue Parent Rd, Suite 200, Saint-Bruno, QC J3V 6L8, CANADA+1-450-678-3330
EMERGENCY 24-Hour Phone Number:
CHEMTREC 800-424-9300 USA and Canada / +1-703-527-3887 International
Hazard Statements
Not Applicable
Precautionary Statements
Not Applicable
Hazards Not Otherwise Classified (HNOC), Other Hazards
By excessive exposure to dust, eye and respiratory tract irritation is possible.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance, Mixture or Article Article
HAZARDOUS INGREDIENTS
Component / CAS No. % GHS Classification Carcinogen
Modified siloxane/silicone resin
68440-70-0
0 – 70 Aquatic Chronic 4 (H413) –
The specific chemical identity and/or exact percentage of composition for one or more ingredients has been withheld as a
trade secret.
Additional GHS classification or other information may be included in this section but has not been adopted by OSHA.
See Section 16 for full text of H phrases.
4. FIRST AID MEASURES
DESCRIPTION OF FIRST AID MEASURES
Eye Contact:
Not an expected route of exposure.
Skin Contact:
Wash immediately with plenty of water and soap.
Ingestion:
Not an expected route of exposure.
Inhalation:
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
None known
INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDS
Not applicable
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Use water spray or fog, carbon dioxide or dry chemical.
Page 2 of 8Polyimide Tape SDS: 0060050 Date Prepared: 02/06/2017
Extinguishing Media to Avoid:
full water jet.
Protective Equipment:
Firefighters, and others exposed, wear self-contained breathing apparatus.
Special Hazards:
None known
6. ACCIDENTAL RELEASE MEASURES
Personal precautions:
Refer to Section 8 (Exposure Controls/Personal Protection) for appropriate personal protective equipment.
Methods For Cleaning Up:
Sweep up into containers for disposal. Flush spill area with water.
References to other sections:
See Sections 8 and 13 for additional information.
7. HANDLING AND STORAGE
HANDLING
Precautions: None
Special Handling Statements: None
STORAGE
Store in accordance with local, state, and federal regulations.
Storage Temperature: Store at 4.4 – 37.8 C 40 – 100 F
Reason: Quality.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures:
Engineering controls are not usually necessary if good hygiene practices are followed.
Respiratory Protection:
None recommended
Eye Protection:
Wear eye/face protection.
Skin Protection:
Avoid skin contact. Wear impermeable gloves.
Hand Protection:
Wear impermeable gloves. Replace gloves immediately when torn or any change in appearance (dimension, colour,
flexibility etc) is noticed.
Additional Advice:
Before eating, drinking, or smoking, wash face and hands thoroughly with soap and water.
Exposure Limit(s)
The below constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure
limit. At this time, the other constituents have no known exposure limits.
Date Prepared: 02/06/2017 Page 3 of 8Polyimide Tape SDS: 0060050
No values have been established.
9. PHYSICAL AND CHEMICAL PROPERTIES
Color: amber
Appearance: solid
Odor: odorless
Boiling Point: Not available
Melting Point: Not available
Vapor Pressure: Not available
Specific Gravity/Density: Not available
Vapor Density: Not available
Percent Volatile (% by wt.): 2000 mg/kg
No data
Page 5 of 8
inhalation
oral
Ames Salmonella Assay
rat
No data
Acute LC50 4 hr
Polyimide Tape
.Not an expected route of
exposure
rat
SDS: 0060050
Acute Irritation
The chemical, physical, and toxicological properties of this material have not been fully investigated. This material is
expected to have a low order of oral and dermal toxicity. The acute oral (rat) and acute dermal (rabbit) LD50 values for
Modified siloxane/silicone resin are estimated to be >2000 mg/kg, respectively. Direct contact is expected to minimal to
slight eye and skin irritation.
Acute LD50
skin Not irritating
.Not an expected route of
exposure
Acute Irritation eye Not an expected route of
exposure
dermal
Date Prepared: 02/06/2017
Sensitization
rabbit
skin No data
Acute LD50
Sensitization
RESULTS OF PBT AND vPvB ASSESSMENT
Not determined
HAZARDOUS INGREDIENT TOXICITY DATA
Component / CAS No. Toxicity to Algae Toxicity to Fish Toxicity to Water Flea
Modified siloxane/silicone resin
68440-70-0
Not available Not available Not available
13. DISPOSAL CONSIDERATIONS
The information on RCRA waste classification and disposal methodology provided below applies only to the product, as
supplied. If the material has been altered or contaminated, or it has exceeded its recommended shelf life, the guidance
may be inapplicable. Hazardous waste classification under federal regulations (40 CFR Part 261 et seq) is dependent
upon whether a material is a RCRA “listed hazardous waste” or has any of the four RCRA “hazardous waste
characteristics.” Refer to 40 CFR Part 261.33 to determine if a given material to be disposed of is a RCRA “listed
hazardous waste”; information contained in Section 15 of this MSDS is not intended to indicate if the product is a “listed
hazardous waste.” RCRA Hazardous Waste Characteristics: There are four characteristics defined in 40 CFR Section
261.21-61.24: Ignitability, Corrosivity, Reactivity, and Toxicity. To determine Ignitability, see Section 9 of this MSDS
(flash point). For Corrosivity, see Sections 9 and 14 (pH and DOT corrosivity). For Reactivity, see Section 10
(incompatible materials). For Toxicity, see Section 3 (composition). Federal regulations are subject to change. State and
local requirements, which may differ from or be more stringent than the federal regulations, may also apply to the
classification of the material if it is to be disposed. The Company encourages the recycle, recovery and reuse of
materials, where permitted, as an alternate to disposal as a waste. The Company recommends that organic materials
classified as RCRA hazardous wastes be disposed of by thermal treatment or incineration at EPA approved facilities.
The Company has provided the foregoing for information only; the person generating the waste is responsible for
determining the waste classification and disposal method.
14. TRANSPORT INFORMATION
This section provides basic shipping classification information. Refer to appropriate transportation regulations for specific
requirements.
US DOT
Dangerous Goods Not applicable/Not regulated
TRANSPORT CANADA
Dangerous Goods Not applicable/Not regulated
ICAO / IATA
Dangerous Goods Not applicable/Not regulated
IMO
Dangerous Goods Not applicable/Not regulated
_____________________________________________________________________________
15. REGULATORY INFORMATION
SDS: 0060050 Date Prepared: 02/06/2017 Page 6 of 8Polyimide Tape
15. REGULATORY INFORMATION
Inventory Information
United States (USA): All components of this product are included on the TSCA Chemical Inventory or are not
required to be listed on the TSCA Chemical Inventory.
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not required to
be listed on the DSL.
Australia: All components of this product are included in the Australian Inventory of Chemical Substances (AICS)
or are not required to be listed on AICS.
China: All components of this product are included on the Chinese inventory or are not required to be listed on the
Chinese inventory.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required to be
listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be listed
on the Korean inventory.
Philippines: All components of this product are included on the Ph ilippine (PICCS) inventory or are not required to
be listed on the Philippine inventory.
Taiwan: All components of this product are included on the Taiwan Chemical Substance Inventory (TCSI) or are
not required to be listed on the Taiwan inventory.
OTHER ENVIRONMENTAL INFORMATION
The following components of this product may be subject to reporting requirements pursuant to Section 313 of CERCLA
(40 CFR 372), Section 12(b) of TSCA, or may be subject to release reporting requirements (40 CFR 307, 40 CFR 311,
etc.) See Section 13 for information on waste classification and waste disposal of this product.
This product does not contain any components regulated under these sections of the EPA
PRODUCT HAZARD CLASSIFICATION UNDER SECTION 311 OF SARA
Not applicable
_____________________________________________________________________________
16. OTHER INFORMATION
NFPA Hazard Rating (National Fire Protection Association)
Health: 1 – Materials that, under emergency conditions, can cause significant irritation.
Fire: 1 – Materials that must be preheated before ignition can occur.
Instability: 0 – Materials that in themselves are normally stable, even under fire exposure conditions.
Reasons For Issue: Revised Section 1
Date Prepared: 02/06/2017
Date of last significant revision:02/01/2017
Component Hazard Phrases
H413 – May cause long lasting harmful effects to aquatic life.
Date Prepared: 02/06/2017 Page 7 of 8
Modified siloxane/silicone resin
Polyimide Tape SDS: 0060050
verification. Before using any product, read its label.
Date Prepared: 02/06/2017 Page 8 of 8Polyimide Tape SDS: 0060050
Prepared By: Legal & Compliance Services; E-mail: hse@compositesone.com
Users Responsibility/Disclaimer of Liability
Information contained herein is believed to be true and accurate but all statements or suggestions are made without warranty, expressed or implied,
regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof.
Compliance with all applicable federal, state and local laws and local regulations remains the responsibility of the user. This safety data sheet
cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to
determine if, or where, additional precautions may be necessary. All health and safety information contained in this safety data sheet should be
provided to your employees or customers. It is your responsibility to develop appropriate work practice guidelines and employee instructional
programs for your operation.
