by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
HexForce
286
Carbon Fabric
Product Data
STYLE 286 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style 4 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 9.9 mil 0.25 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
284
Carbon Fabric
Product Data
STYLE 284 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style 2/2 Twill
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 9.1 mil 0.23 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
284
Carbon Fabric
Product Data
STYLE 284 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style 2/2 Twill
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 9.1 mil 0.23 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
TM 284 ZB Prime Tex
Carbon Fabric
Style 284 ZB Prime Tex US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.70 oz/yd
2
193 g/m
2
Weave Style 2/2 Twill
Finish ZB
Construction
Nominal Construction Warp Count: 12.5/in 4.92/cm
Fill Count: 12.5/in 4.92/cm
Fabric Thickness 9.1 mil 0.23 mm
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830- 379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1- 866-601 -5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
by | Sep 27, 2025
HexForce
282
Carbon Fabric
Product Data
STYLE 282 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 10.10 mil 0.26 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
282
Carbon Fabric
Product Data
STYLE 282 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 10.10 mil 0.26 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
284
Carbon Fabric
Product Data
STYLE 284 US System
Type of Yarns Warp Yarn: 3K Carbon, 33MSI
Fill Yarn: 3K Carbon, 33MSI
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style 2/2 Twill
CONSTRUCTION
Nominal Construction Warp Count: 12/in
Fill Count: 12/in
Fabric Thickness 9.1 mil 0.23 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
