by | Sep 27, 2025
7/19/2024
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 2220
Finish 627
Weave Pattern 4-Harness Satin
Fiber Type Glass
Yarn Description
Warp ECE 225 1/0
Fill ECE 225 1/0
Count: (Ends x Picks)/inch 60.0 x 58.0
Weight 3.04 oz./yd
2
(Nominal)
Breaking Strength
Warp 60 lb./inch
Fill 55 lb./inch
Thickness 0.0038 inch (Nominal)
Values shown are based on typical Finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
TM
F3GR282(N)
Carbon Fabric
Style F3GR282(N) US System
Type of Yarns Warp Yarn: Cytec T300 3K Carbon, 33MSI
Fill Yarn: Cytec T300 3K Carbon, 33MSI
Fabric Weight, Dry 5.70 oz/yd
2
193 g/m
2
Weave Style Plain
Construction
Nominal Construction Warp Count: 12.5/in 4.92/cm
Fill Count: 12.5/in 4.92/cm
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
by | Sep 27, 2025
TECHNICAL DATASHEET
SAP No. 30000955 Article Description X-C-588g/m -1270mm
Textile Structure 7001789 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
4 45 290 g/m +/- 5 % AKSA A-42 12K
3 90 1 g/m +/- 5 % E-glass 68 TEX
2 0 1 g/m +/- 5 % E-glass 34 TEX
1 -45 290 g/m +/- 5 % AKSA A-42 12K
Stitching 6 g/m +/- 1 g/m PES [Polyester] 76 dtex
FURTHER CHARACTERISTICS
Gauge 5,0 Stitching pattern warp Width (nominal) 1.270 mm
Stitch length 2,02 mm Total tolerance 5,1 % Total areal weigh t 588 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard coreand wrapped in foil. Further packaging
options can be determined individually.
Storage With original packaging: Temperature 15-35 C and 2 0-80% humidity. No moisture
recommendation and direct sunlight. To avoid problems with humidity and electrostatic charge,
fabrics to be conditioned 24 hours prior to processing, independent of storage
conditions.
SAERTEX GmbH & Co. KG has been certified in accordance with ISO 9001:2008 and EN 9100:2009 and has been awarded the 2016
Eco-Profit Award. The SAERTEX GmbH & Co. KG has its own DNV GL certified laboratory.
REINFORCING YOUR IDEAS
by | Sep 27, 2025
HexForce
1800
Fiber Glass Fabric
Product Data
STYLE 1800 US System SI Units
Type of Yarns Warp Yarn: ECK 18 1/0 EC13 272
Fill Yarn: ECK 18 1/0 EC13 272
Fabric Weight, Dry 9.33 oz/yd
2
316 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 16/in 6.29/cm
Fill Count: 14/in 5.51/cm
Fabric Thickness 11.10 mil 0.28 mm
Breaking Strength Warp 530 lbf/in
Filling 460 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
9/27/2024
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 1800
Finish 504
Weave Pattern Plain
Fiber Type Glass
Yarn Description
Warp ECK 18 1/0
Fill ECK 18 1/0
Count: (Ends x Picks)/inch 16.0 x 14.0
Weight 9.6 oz./yd
2
Breaking Strength
Warp 180 lb/inch
Fill 140 lb/inch
Thickness 0.0129 inch
Values shown are based on typical Finished fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
1800
Fiber Glass Fabric
Product Data
STYLE 1800 US System SI Units
Type of Yarns Warp Yarn: ECK 18 1/0 EC13 272
Fill Yarn: ECK 18 1/0 EC13 272
Fabric Weight, Dry 9.33 oz/yd
2
316 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 16/in 6.29/cm
Fill Count: 14/in 5.51/cm
Fabric Thickness 11.10 mil 0.28 mm
Breaking Strength Warp 530 lbf/in
Filling 460 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
STYLE
1659 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/0 EC9 33
Fill Yarn: ECG 75 1/0 EC9 68
Fabric Weight, Dry 1.60 oz/yd
2
54 g/m
2
Weave Style Leno
CONSTRUCTION
Nominal Construction Warp Count: 20/in 7.9/cm
Fill Count: 10/in 3.9/cm
Fabric Thickness
4.2 mils 0.11 mm
Yarn Breaking Strength Warp 65 lbf/in 57 daN/5cm
Filling 70 lbf/in 61 daN/5cm
Markets
General Industrial
Applications Coated and Laminated Fabrics
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness, and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for the
purpose required. All sales are made subject to our standard terms of sales which include limitations on liability
and other important terms. The fabric style listed may not be available from
inventory, and minimum order
quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
2200 S. Murray Ave.
Anderson, SC 29622
USA
Phone: 864-225-7028
Fax: 864-260-6581
1659
Fiber Glass Fabric
Product Data
by | Sep 27, 2025
HexForce
1659
Fiber Glass Fabric
Product Data
STYLE 1659 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/0 EC9 33
Fill Yarn: ECG 75 1/0 EC9 68
Fabric Weight, Dry 1.60 oz/yd
2
54 g/m
2
Weave Style Leno
CONSTRUCTION
Nominal Construction Warp Count: 20/in 7.87/cm
Fill Count: 10/in 3.93/cm
Fabric Thickness 4.20 mil 0.11 mm
Breaking Strength Warp 70 lbf/in
Filling 100 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
230 Slayton Ave.
Suite A1
Danville VA 24540
434-857-4400
800-476-4845
Email: info@bgf.com
Website: www.bgf.com
Data Sheet Product Information
Style 1597
Finish Greige
Weave Pattern Triple Plain
Fiber Type Glass
Yarn Description
Warp ECG 37 1/4
Fill ECG 37 1/4
Count: (Ends x Picks)/inch 30.0 x 30.0
Weight 38.5 oz/yd
2
Breaking Strength
Warp 1250 lb/inch
Fill 1300 lb/inch
Thickness 0.0420 inch
Values shown are based on typical GREIGE fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
1597
Fiber Glass Fabric
Product Data
STYLE 1597 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/4 EC9 134×4
Fill Yarn: ECG 37 1/4 EC9 134×4
Fabric Weight, Dry 38.57 oz/yd
2
1308 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 30/in 11.80/cm
Fill Count: 30/in 11.80/cm
Fabric Thickness 37.80 mil 0.96 mm
Breaking Strength Warp 1300 lbf/in
Filling 1400 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
