by | Sep 27, 2025
6/21/2023
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Data Sheet Product Information
Style 1597
Finish 504
Weave Pattern Triple Plain
Fiber Type Glass
Yarn Description
Warp ECG 37 1/4
Fill ECG 37 1/4
Count: (Ends x Picks)/inch 30.0 x 30.0
Weight 38.5 oz/yd
2
Breaking Strength
Warp 430 lb/inch
Fill 400 lb/inch
Thickness 0.0420 inch
Values shown are based on typical FINISHED fabric data and
should be only used as a guide, not a specification.
by | Sep 27, 2025
HexForce
1581
Fiber Glass Fabric
Product Data
STYLE 1581 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 8.79 oz/yd
2
298 g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 57/in 22.44/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 8.50 mil 0.22 mm
Breaking Strength Warp 450 lbf/in
Filling 380 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1581
Fiber Glass Fabric
Product Data
STYLE 1581 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 8.79 oz/yd
2
298 g/m
2
Weave Style 8 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 57/in 22.44/cm
Fill Count: 54/in 21.25/cm
Fabric Thickness 8.50 mil 0.22 mm
Breaking Strength Warp 450 lbf/in
Filling 380 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1579
Fiber Glass Fabric
Product Data
STYLE 1579 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 75 1/0 EC9 68
Fabric Weight, Dry 3.68 oz/yd
2
125 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 30/in 11.81/cm
Fill Count: 16/in 6.29/cm
Fabric Thickness 4.50 mil 0.11 mm
Breaking Strength Warp 200 lbf/in
Filling 110 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1579
Fiber Glass Fabric
Product Data
STYLE 1579 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 75 1/0 EC9 68
Fabric Weight, Dry 3.68 oz/yd
2
125 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 30/in 11.81/cm
Fill Count: 16/in 6.29/cm
Fabric Thickness 4.50 mil 0.11 mm
Breaking Strength Warp 200 lbf/in
Filling 110 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1543
Fiber Glass Fabric
Product Data
STYLE 1543 US System SI Units
Type of Yarns Warp Yarn: ECG 75 1/2 EC9 68×2
Fill Yarn: ECE 225 1/0 EC7 22
Fabric Weight, Dry 8.69 oz/yd
2
295 g/m
2
Weave Style 4 Harness Satin
CONSTRUCTION
Nominal Construction Warp Count: 49/in 19.29/cm
Fill Count: 30/in 11.80/cm
Fabric Thickness 7.80 mil 0.20 mm
Breaking Strength Warp 625 lbf/in
Filling 90 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1522
Fiber Glass Fabric
Product Data
STYLE 1522 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 3.67 oz/yd
2
124 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.7/cm
Fabric Thickness 5.30 mil 0.12 mm
Breaking Strength Warp 160 lbf/in
Filling 150 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1522
Fiber Glass Fabric
Product Data
STYLE 1522 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 3.67 oz/yd
2
124 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.7/cm
Fabric Thickness 5.30 mil 0.12 mm
Breaking Strength Warp 160 lbf/in
Filling 150 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1522
Fiber Glass Fabric
Product Data
STYLE 1522 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 3.67 oz/yd
2
124 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.7/cm
Fabric Thickness 5.30 mil 0.12 mm
Breaking Strength Warp 160 lbf/in
Filling 150 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
1522
Fiber Glass Fabric
Product Data
STYLE 1522 US System SI Units
Type of Yarns Warp Yarn: ECG 150 1/2 EC9 33×2
Fill Yarn: ECG 150 1/2 EC9 33×2
Fabric Weight, Dry 3.67 oz/yd
2
124 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.7/cm
Fabric Thickness 5.30 mil 0.12 mm
Breaking Strength Warp 160 lbf/in
Filling 150 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
