15M58L600R_SDS.pdf
15M1028450_SDS.pdf
15M10E24C_SDS.pdf
Revision date: 5/1/2015 Revision: 0
SAFETY DATA SHEET
M10E Resin
1. Identification
Product identifier
Product name M10E Resin
Chemical name Modified Epoxy Resin
Product number 21105US-2
Recommended use of the chemical and restrictions on use
Application Formulated product for Aerospace, Industrial and Wind Energy applications
Details of the supplier of the safety data sheet
Supplier Hexcel Composites
6700 West 5400 South
West Valley City
UT 84118-7678
USA
Tel: ++801 252 3400
Tel: ++800 987 0658
Contact Person 11711 Dublin Blvd, Dublin, California, USA. ++925 551 4900
Emergency telephone number
Emergency telephone To be used only for advice on chemical emergencies, spillages, fires or First Aid:
For emergencies in US/Canada: CHEMTREC 800 424 9300
For emergencies in rest of the world: CARECHEM24 – +44 (0) 1235 239 670
2. Hazard(s) identification
Classification of the substance or mixture
OSHA Regulatory Status This Product is Hazardous under the OSHA Hazard Communication Standard.
Physical hazards Not Classified
Health hazards Skin Irrit. 2 – H315 Eye Irrit. 2A – H319 Skin Sens. 1 – H317 Carc. 2 – H351 STOT RE 2 – H373
Environmental hazards Aquatic Chronic 2 – H411
Label elements
Pictogram
Signal word Warning
1/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
Hazard statements H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements P260 Do not breathe vapor/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 If on skin: Wash with plenty of water.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
Contains BISPHENOL A EPOXY RESIN (MOLECULAR WT <700), Phenol, 4,4'-(methylethylidene) bis-
polymer with 2,2'-[(1-methylethylidene) bis (4,1-phenyleneoxymethylene) bis [oxirane],
DIURON (ISO)
Other hazards
Warning! May cause eye, skin and upper respiratory tract irritation, allergic skin reaction, dermatitis and possible
sensitization. Vapor or fumes evolved during use and/or heating or curing the product may cause respiratory tract and eye
irritation. Dust or particulates from machining, grinding or sawing the cured product may causes skin, eye and upper
respiratory tract irritation, allergic skin reaction and possible sensitization.
3. Composition/information on ingredients
Mixtures
BISPHENOL A EPOXY RESIN (MOLECULAR WT <700) 30-60%
CAS number: 25085-99-8
Classification
Skin Irrit. 2 - H315
Eye Irrit. 2 - H319
Skin Sens. 1 - H317
Aquatic Chronic 2 - H411
Phenol, 4,4'-(methylethylidene) bis-polymer with 2,2'-[(1-
methylethylidene) bis (4,1-phenyleneoxymethylene) bis
[oxirane]
30-60%
CAS number: 25036-25-3
Classification
Combustible Dust - USH01
Skin Irrit. 2 - H315
Eye Irrit. 2A - H319
Skin Sens. 1 - H317
2/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
DIURON (ISO) 1-5%
CAS number: 330-54-1
Classification
Carc. 2 - H351
Acute Tox. 4 - H302
STOT RE 2 - H373
The full text for all hazard statements is displayed in Section 16.
4. First-aid measures
Description of first aid measures
Inhalation With any sign of respiratory distress, affected persons should be taken into fresh air, and
made to rest while medical attention is sought.
Ingestion Immediately rinse the mouth repeatedly with water, if swallowing has occurred, do not induce
vomiting. If requested, give affected person sips of water. Seek medical attention immediately.
If vomiting does occur do not allow the affected person to inhale their vomit. Do not give
anything by mouth to an unconscious person.
Skin Contact With uncured material, immediately wash the affected area with warm, soapy water then clean
the skin with resin removing cream, followed by further washing with warm soapy water. Do
not use solvents. If irritation persists, seek medical attention.
Eye contact Flush with water for at least 15 minutes and seek medical attention if irritation persists.
Indication of immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations. If in doubt, get medical attention promptly.
5.Fire-fighting measures
Extinguishing media
Suitable extinguishing mediaExtinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture
Specific hazards Refer to section 10 for further details.
Hazardous combustion
products
The products of combustion and decomposition depend on other materials present in the fire
and the actual conditions of the fire. Burning will release carbon dioxide, water, carbon
monoxide and compounds of nitrogen.
Advice for firefighters
Protective actions during
firefighting
A fire in the vicinity poses the risk of pressure build-up and rupture. Containers at risk from fire
should be cooled with water and, if possible, removed from the danger area. Do not allow
contaminated extinguishing water to enter the soil, ground water or surface waters.
Special protective equipment
for firefighters
Avoid exposure through use of a self-contained, positive-pressure breathing apparatus.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
3/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
Personal precautions Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots,
clothing or apron, as appropriate.
Environmental precautions
Environmental precautionsPrevent spillage entering drainage systems or contaminating ground water or soil; if these
occur, inform local water and environmental health agencies immediately.
Methods and material for containment and cleaning up
Methods for cleaning up Collect and place in suitable waste disposal containers and seal securely. For waste disposal,
see Section 13.
Reference to other sectionsFor personal protection, see Section 8. For waste disposal, see Section 13.
7. Handling and storage
Precautions for safe handling
Usage precautions Avoid contact with uncured product. Avoid inhalation of dust/fumes generated during
processing operations. Provide positive dust extraction and collection from cutting zone.
Protect against fire and explosion by avoiding dust formation and ignition sources when
machining product. Wash at the end of each work shift and before eating, smoking and using
the toilet. Use appropriate skin cream to prevent drying of skin. When using, do not eat, drink
or smoke. Promptly remove any clothing that becomes contaminated.
Conditions for safe storage, including any incompatibilities
Storage precautions Keep container tightly closed and dry. See label on the container for the proper storage
temperature.
8. Exposure Controls/personal protection
Control parameters
Occupational exposure limits
DIURON (ISO)
Long-term exposure limit (8-hour TWA): ACGIH 10 mg/m
Short-term exposure limit (15-minute): ACGIH
ACGIH = American Conference of Governmental Industrial Hygienists.
Exposure controls
Protective equipment
Appropriate engineering
controls
Provide adequate ventilation for operations involving elevated temperature or dust formation.
Eye/face protection Wear approved safety spectacles, goggles or facemask.
Hand protection Avoid skin contact by use of impermeable gloves when handling the product.
Other skin and body
protection
Ensure forearms are protected by use of gloves with long gauntlet, disposable sleeves or long
sleeve overalls.
Hygiene measures Wash hands at the end of each work shift and before eating, smoking and using the toilet.
Respiratory protection If ventilation is inadequate, suitable respiratory protection must be worn.
9. Physical and Chemical Properties
4/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
Information on basic physical and chemical properties
Appearance Light yellow to amber
Odor No characteristic odor.
Explosive properties Does not meet the criteria for classification as explosive.
Oxidising properties Does not meet the criteria for classification as oxidizing.
10. Stability and reactivity
Stability Stable under proper handling and storage conditions.
Possibility of hazardous
reactions
Will not occur under proper conditions of use. Rapid heating of the product in bulk may
produce an uncontrolled exothermic reaction that may char and decompose the size,
generating unidentified gases and vapors that may be toxic. Avoid inhalation.
Conditions to avoid Avoid heat, flames and other sources of ignition.
Materials to avoid Strong oxidizing agents.
Hazardous decomposition
products
Thermal decomposition and burning may release oxides of carbon, nitrogen and sulphur. The
composition of gases/vapours/by-products generated during decomposition will vary
depending on temperature conditions, temperature rate of rise and the presence of other
chemicals in the vicinity that may react with the product. Gases/vapours/by-products should
be regarded as toxic.
11. Toxicological information
Information on toxicological effects
Toxicological effects This product has not been tested. Judgements on the expected toxicity of this product have
been made based upon consideration of its major components.
Acute toxicity - oral
Notes (oral LD ) Based on available data the classification criteria are not met.
Acute toxicity - dermal
Notes (dermal LD ) Based on available data the classification criteria are not met.
Acute toxicity - inhalation
Notes (inhalation LC ) Based on available data the classification criteria are not met.
Skin corrosion/irritation
Animal data Based on available data the classification criteria are not met.
Serious eye damage/irritation
Serious eye damage/irritationBased on available data the classification criteria are not met.
Respiratory sensitisation
Respiratory sensitisationBased on available data the classification criteria are not met.
Skin sensitisation
Skin sensitisation Based on available data the classification criteria are not met.
Germ cell mutagenicity
Genotoxicity - in vitro Based on available data the classification criteria are not met.
Carcinogenicity
5/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
Carcinogenicity May cause cancer.
Reproductive toxicity
Reproductive toxicity - fertilityBased on available data the classification criteria are not met.
Specific target organ toxicity - single exposure
STOT - single exposure Based on available data the classification criteria are not met.
Specific target organ toxicity - repeated exposure
STOT - repeated exposure May cause damage to organs.
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
Inhalation Gas or vapor in high concentrations may irritate the respiratory system. Symptoms following
overexposure may include the following: Headache. Fatigue. Nausea, vomiting.
Ingestion This material may be harmful or fatal if swallowed.
Skin Contact May cause skin irritation. Allergic reactions are possible .
Eye contact Irritating to eyes. Symptoms following overexposure may include the following: Redness.
Pain.
Medical considerations Preexisting eye, skin or respiratory disorders may be aggravated by contact and/or exposure
to the product, the vapor or fumes generated from heating the product or to the dust or
particulate from machining, grinding or sawing the cured product.
12. Ecological Information
Ecotoxicity There are no data on the ecotoxicity of this product.
13. Disposal considerations
Waste treatment methods
General information Materials for disposal should be placed in appropriate sealed containers to avoid potential
human and environmental exposure. It is the responsibility of the generator to comply with all
federal, state, provincial and local laws and regulations. We recommend that you contact an
appropriate waste disposal contractor and environmental agency for relevant laws and
regulations. Under the U.S., Resource Conservation and Recovery Act (RCRA), it is the
responsibility of the user of the product to determine at the time of disposal, whether the
product meets relevant waste classification and to assure proper disposal.
Disposal methods Do not discharge into drains, ground water or soil.
Dispose of by high temperature incineration in an approved plant.
Do not re-use any containers contaminated with product for any purpose.
14. Transport information
General Not determined, further testing is required For Resin Samples
Road transport notes For packaging, no more than 1 lbs. per container and no more than 22 lbs. per transport
vehicle.
Air transport notes Hexcel Internal Policy Forbidden for passenger and cargo aircraft.
UN Number
UN No. (DOT) UN 3234
6/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
UN No. (IMDG) UN 3234
UN proper shipping name
Proper shipping name (DOT)Self reactive solid, type C, temperature controlled
Proper shipping name
(IMDG)
Self reactive solid, type C, temperature controlled
Transport hazard class(es)
DOT hazard class 4.1
DOT hazard label Flammable Solid
IMDG Class 4.1
Transport labels
Packing group
DOT pack group II
IMDG packing group II
Environmental hazards
Environmentally Hazardous Substance
Special precautions for user
Packing Method OP2
15. Regulatory information
US Federal Regulations
CERCLA/Superfund, Hazardous Substances/Reportable Quantities (EPA)
DIURON (ISO)
SARA 313 Emission Reporting
DIURON (ISO)
DICYANDIAMIDE
RCRA RCRA Information: Currently, the product is not listed in the federal hazardous waste
regulation 40 CFR, Part 261.33, paragraphs (E) or (F), ie. chemical products that are
considered hazardous if they become waste. State or local hazardous waste regulations may
also apply if they are different from the federal regulation. It is the responsibility of the user of
the product to determine at the time of disposal, whether the product meets relevant waste
classification and to assure proper disposal.
SARA (311/312) Hazard Categories
Acute
Chronic
US State Regulations
7/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
State Regulations CommentsRCRA Information: Currently, the product is not listed in federal hazardous waste regulation
40 CFR, Part 261.33, paragraphs (E) or (F), ie. chemical products that are considered
hazardous if they become wastes. State or local hazardous waste regulations may also apply
if they are different from the federal regulation. It is the responsibility of the user of the
product to determine at the time of disposal, whether the product meets relevant waste
classifciation and to assure proper disposal.
California Proposition 65 Carcinogens and Reproductive Toxins
This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic
Enforcement Act of 1986 (Proposition 65) as being known to cause cancer, birth defects or other reproductive harm.
DIURON (ISO)
AMORPHOUS SILICA CALCIUM-ION EXCHANGE
Inventories
US - TSCA
All components of this product are either listed or are not required to be listed in the US, EPA, TSCA inventory.
16. Other information
Abbreviations and acronyms
used in the safety data sheet
ACGIH American Conference of Industrial Hygienists ATE Acute Toxicity Estimate CAS#
Chemical Abstracts Service Number CERCLA Comprehensive Environmental Response,
Compensation, and Liability Act DOT Department of Transportation EmS Emergency
Response Procedures for Ships Carrying Dangerous Goods EPA Environmental Protection
Agency GHS Global Harmonized System HMIS Hazardous Materials Identification System,
IATA International Air Transport Association ICAO International Civil Aviation Organization
IMDG International Maritime Dangerous Goods Kow Octanol-water partition coefficient LC50
Lethal concentration to 50% of a test population LD50 Lethal dose to 50% of a test population
n.o.s. Not otherwise specified OSHA Occupational Safety and Health Administration PBT
Persistent, Bioaccumulative and Toxic substance PNEC Predicted No Effect Concentration
PPE Personal Protection Equipment RCRA Resource Conservation and Recovery Act SADT
Self-accelerating decomposition temperature SARA Superfund Admendments and
Reauthorization Act STOT Specific Target Organ Toxicity (STOT) RE Repeated Exposure
(STOT) SE Single Exposure TSCA Toxic Substance Control Act UN United Nations VOC
Volatile Organic Compound WHMIS Workplace Hazardous Materials Information System
General information Empty containers will retain some of the product residue. When handling or disposing of
them, follow all label warnings, other instructions and waste disposal procedures.
Issued by U.S.A. Product Safety Department
Revision date 5/1/2015
Revision 0
Signature Darryl Ong
Hazard statements in fullH302 Harmful if swallowed.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
USH01 May form combustible dust concentrations in air
ACA HMIS Health rating. Moderate hazard. (2)
8/9
Revision date: 5/1/2015 Revision: 0
M10E Resin
ACA HMIS Physical hazard
rating.
Normally stable. (0)
ACA HMIS Personal
protection rating.
H
ACA HMIS Flammability
rating.
Burns only if pre-heated. (1)
Wherever such words or phrases as "hazardous," "toxic," "carcinogen," etc. appear herein, they are used as a defined or
described under state employee right-to-know laws, Federal OSHA laws or the direct sources for these lawssuch as the
International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP), etc. The use of such words or
phrases should not be taken to mean that we deem or imply any substance or exposure to be toxic, hazardous or otherwise
harmful. Any exposure can only be understood within the entire context of its occurrence, which includes such factors as the
substance's characteristics as defined in the SDS, amount and duration of exposures, other chemicals present and
preexistingindividual differences in response to the exposure. The data provided in this SDS is based on the information
received from our raw material suppliers and other sources believed to be reliable. We are supplying you this data solely in
compliance with the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200 and the Federal and State laws as
described in Section 15: Regulatory Information. The information contained in this SDS is proprietary and confidential to
HexcelCorporation. This SDS and the information in it are not to be used for purposes other than compliance with the
Federal OSHA Hazard Communication Standard. If you have received this SDS from any other source than Hexcel
Corporation or its authorized agent, the information contained in it may have been modified from the original document and it
may not be the most current revision. Liability, if any, for use of this product is limited to the terms contained in our sale terms
and conditions. We do not in any way warrant (expressed or implied, including any implied warranty for merchantability or
fitness for a particular purpose) the data contained or the product described in this SDS. Additionally, we do not warrant that
the product will not infringe any patent or other proprietary or property rights of others.
9/9
15I9G1935_SDS.pdf
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 1 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 1: Identification
Chemical Product Name/Identifier: All styles of fiberglass fabric
CAS Number: 65997-17-3
Synonyms: Fibrous glass
Recommended Use and Restrictions on Use:
Woven textile product used for reinforcement in various resin systems
Company Information: BGF Industries
230 Slayton Ave.
Danville, VA 24540
Telephone: 800-476-4845, 434-857-4400
Email: info@bgf.com
Website: http://www.bgf.com
Section 2: Hazards Identification
OSHA HCS Status: This product is a hazardous chemical, as defined by OSHA at 29 CFR
1910.1200.Hazards identified are based on hazards of the ingredients. The finished product has not been
tested.
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
OSHA/GHS Signal Word and Hazard Statements:
WARNING: Causes mild skin irritation. May cause respiratory irritation.
OSHA/GHS Classification and Pictograms:
Skin irritation (Hazard Category 3)
Specific target organ toxicity, single exposure: Respiratory tract irritation (Hazard Category 3)
OSHA/GHS Precautionary Statements:
Finish: 161 460 490 497A 508(A) 516W 558 602 608 617 621
627 636 639 642 643 644 646 650 655 657 660
770B 823D 830 845A 865S 905 929 939 967 978 984
F69 PT07 PT12 PT40 PT712 PT724 PT731 PT761 Z6040 A218 A252D
A303A A303B A330 A332A A332B A332C A332D A332E A358 A380 A412
A419 A427 A427A A427B A429A A429B A433 A433A A433B A433C A433D
A433E A433F A442 A443 A484B A741 A496 A803 A810 A851 A940
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 2 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Prevention
Avoid breathing fibers or dust. Use only outdoors or in a well-ventilated area. Keep containers tightly
closed.
Response
If inhaled: Remove victim to fresh air and keep comfortable for breathing. Call a poison
center/doctor/physician if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
Storage
Store in a well-ventilated place. Store locked up. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
GHS Hazard and Precautionary Statement Codes: See Section 16
.
Section 3: Composition/Information on Ingredients
Chemical Product Name: Fiberglass fabric
Synonyms: Fibrous glass
Component CAS # Max % by weight
Glass, oxide, chemicals 65997-17-3 99.5
Fibrous glass dust * Not assigned Not assigned
Silane Coupling Agents
A
Not assigned 0.5
* Amount will be dependent upon method of handling
A Chemically bound to the fiberglass
Section 4: First-Aid Measures
Skin Contact: Flush with ample cool water followed by washing with mild soap to remove accumulated
fibers.
Eye Contact: Flush with flowing water for 15 minutes seek medical attention.
Inhalation: Move to fresh air.
Ingestion: Not likely to occur through normal use. Should ingestion occur, seek medical attention.
Most Important Symptoms/Effects: Direct skin contact with fibrous glass or its dust may cause
mechanical irritation and transitory dermatitis. Breathing of fibers or dust may cause
mechanical irritation of the mouth, nose, and throat.
Indication of Immediate Medical Attention and Special Treatment Needed: Get medical attention if
product comes into contact with skin or eyes, or if it is inhaled or ingested.
Section 5: Fire-Fighting Measures
Extinguishing Media: Water, dry powder, or foam (needed for packaging only).
Hazardous Combustion Products: Not applicable.
Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus and turn
out gear.
Fire Fighting Procedures/Precautions: Fiberglass itself will not support combustion, but in a sustained
fire, proper protection against products of combustion from the fuel must be worn.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 3 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 6: Accidental Release Measures
Personal Precautions: A release of this product is not expected to pose risks to workers under normal
circumstances. If the material is involved in a fire, or if dusts are produced, no action shall be
taken involving any personal risk or without suitable training. Keep unnecessary and
unprotected personnel from entering. Put on appropriate personal protective equipment.
Protective Equipment: Wear protective gloves/eye protection/skin protection.
Methods/Materials for Containment and Cleaning Up: Dust or loose fibers can be vacuumed or swept
with the aid of a dust suppressant. Dispose of in accordance with all government regulations.
Do not discharge into waterways or sewer systems without proper authority.
Section 7: Handling and Storage
Precautions: This product should be handled under conditions of good industrial hygiene and in conformity
with any local regulations to avoid unnecessary exposure. Use in a well-ventilated area. Do
not breathe dust. Avoid contact with skin.
Storage: Store in a well-ventilated, dry location.
Section 8: Exposure Controls/Personal Protection
Exposure Limits:
Component OSHA/PEL ACGIH/TLV
Fibrous dust 5 mg/m
3
5 mg/m
3
* Dust may be produced during handling
Engineering Controls: Normal area ventilation is sufficient in most cases to keep dust and fiber levels
below the TLV or PEL.
Personal Protection Measures/Equipment:
Skin Protection Barrier creams, gloves, and long sleeve loose fitting clothing may be required for
certain workers who have sensitive skin or contact dermatitis. Work clothing should be laundered
separately from other clothing before reuse.
Eye Protection Not normally required, but as a good safety work practice, eye protection such as
safety glasses/side shields or equivalent whenever use of the product releases airborne fibrous
glass.
Respiratory Protection If airborne fibrous glass exceeds the regulatory limits, or if upper
respiratory irritation occurs, use a N95 particulate filtering respirator.
Other Protection Observe good personal hygiene.
Section 9: Physical and Chemical Properties
Appearance (physical state, color, etc.): Solid, white
Odor: Odorless
Odor Threshold: None
pH: None
Melting Point/Freezing Point: >800 C (>1472 F)
Initial Boiling Point: Not applicable
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 4 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not applicable
Upper/Lower Flammability or Explosive Limits: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density/Specific Gravity: 2.4 to 2.7
Solubility: Insoluble
Partition Coefficient: Not known
Auto-ignition Temperature: Not known
Decomposition Temperature: Not known
Volatility: Not known
Viscosity: Not applicable
Section 10: Stability and Reactivity
Reactivity: Not self-reactive, water-reactive, or spontaneously combustible
Chemical Stability: This product is stable.
Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to Avoid: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible Materials: Not known
Hazardous Decomposition Products: Fiberglass products may release small amounts of acetic acid and
other organic materials at elevated temperatures.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
Symptoms: Causes mild skin irritation. May cause irritation of the mouth, nose, and throat after inhalation
exposure.
Delayed and Immediate Effects: Not known
Chronic Effects (Short and Long Term Exposure): Not known
Numerical Measures of Toxicity: None
Carcinogenicity: No ingredient is listed as a carcinogen by the NTP, IARC, or OSHA at 29 CFR 1910 Subpart
Z.
Mutagenicity: No data available
Reproductive Toxicity: No data available
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 5 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 12: Ecological Information
No data available
Section 13: Disposal Information
Do not discharge into waterways or sewer systems without proper authority. Dispose of in accordance with
all government regulations.
Section 14: Transport Information
Not regulated as a hazardous material/dangerous good for transportation in all modes of transportation (US
DOT, ICAO/IATA, IMO).
Section 15: Regulatory Information
TSCA Inventory Status: Exempt per section 8(a), 710.2(f), and 704.5(a)
SARA Title III Section 302: None
SARA Title III Section 304: None
SARA Title III Section 311/312 Hazard Categories: Immediate (acute)
SARA TITLE III Section 313: This product does not contain components that are subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986
(EPCRA or SARA Title III) and 40 CFR 372.
CERCLA RQ: Not listed
California Proposition 65: None known
Massachusetts Right-To-Know: Less than reportable quantity
New Jersey Right-To-Know: Less than reportable quantity
Pennsylvania Right-To-Know: Less than reportable quantity
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not
required to be listed on the Canadian DSL.
Europe: All components of this product are included on the European Inventory of Existing Commercial
Chemical Substances (EINECS) or are not required to be listed on the EINECS.
China: All components of this product are included on the Chinese Inventory (IECSC) or are not required
to be listed on the Chinese IECSC.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required
to be listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be
listed on the Korean ECL.
Philippines: All components of this product are included on the Philippine (PICCS) or are not required to
be listed on the Philippine PICCS.
Australia: All components of this product are included on the Australian (AICS) or are not required to be
listed on the Australian AICS.
Section 16: Other Information
This product is classified as a Skin Irritant Category 3; however OSHA does not include
Category 3 substances in its hazard classification system.
GHS Label Hazard Statement Codes
Signal Word: WARNING
H316: Causes mild skin irritation
H335: May cause respiratory tract irritation.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 6 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
GHS Label Precautionary Statement Codes
P261: Avoid breathing dusts or fibers.
P271: Use only outdoors or in well-ventilated area.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Abbreviations
ACGIH/TLV American Conference of Industrial Hygienists Threshold Limit Value
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR US Code of Federal Regulations
DOT US Department of Transportation
EPCRA Emergency Planning and Community Right to Know Act
GHS UN Globally Harmonized System of Classification and Labeling of Chemicals
HCS Hazard Communication Standard
IARC International Agency for Research on Cancer
ICAO/IATA International Civil Aviation Organization/International Air Transport Association
IMO/IMDG International Maritime Organization/International Maritime Dangerous Goods Code
LD50 Lethal dose to half of test animals
NTP National Toxicology Program
OSHA US Occupational Safety Health Administration
PEL Permissible exposure limit
RQ Reportable quantity
SARA Superfund Amendments and Reauthorization Act
SDS Safety data sheet
TSCA Toxic Substances Control Act
UN United Nations
US/USA United States
While this company believes that the data contained herein are factual and the opinions expressed are
based on tests and data believed to be reliable, it is the user’s responsibility to determine the safety,
toxicity, and suitability for his or her own use of the product described herein. Since the actual use by
others is beyond our control, no guarantee, expressed or implied, is made by this company as to the effects
of such use, the results to be obtained, or the safety and toxicity of the product, nor does this company
assume any liability arising out of use, by others, of the product referred to herein. Nor is the information
herein to be construed as absolutely complete since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances exist or because of applicable laws or
governmental regulations.
15I9G1925_SDS.pdf
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 1 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 1: Identification
Chemical Product Name/Identifier: All styles of fiberglass fabric
CAS Number: 65997-17-3
Synonyms: Fibrous glass
Recommended Use and Restrictions on Use:
Woven textile product used for reinforcement in various resin systems
Company Information: BGF Industries
230 Slayton Ave.
Danville, VA 24540
Telephone: 800-476-4845, 434-857-4400
Email: info@bgf.com
Website: http://www.bgf.com
Section 2: Hazards Identification
OSHA HCS Status: This product is a hazardous chemical, as defined by OSHA at 29 CFR
1910.1200.Hazards identified are based on hazards of the ingredients. The finished product has not been
tested.
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
OSHA/GHS Signal Word and Hazard Statements:
WARNING: Causes mild skin irritation. May cause respiratory irritation.
OSHA/GHS Classification and Pictograms:
Skin irritation (Hazard Category 3)
Specific target organ toxicity, single exposure: Respiratory tract irritation (Hazard Category 3)
OSHA/GHS Precautionary Statements:
Finish: 161 460 490 497A 508(A) 516W 558 602 608 617 621
627 636 639 642 643 644 646 650 655 657 660
770B 823D 830 845A 865S 905 929 939 967 978 984
F69 PT07 PT12 PT40 PT712 PT724 PT731 PT761 Z6040 A218 A252D
A303A A303B A330 A332A A332B A332C A332D A332E A358 A380 A412
A419 A427 A427A A427B A429A A429B A433 A433A A433B A433C A433D
A433E A433F A442 A443 A484B A741 A496 A803 A810 A851 A940
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 2 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Prevention
Avoid breathing fibers or dust. Use only outdoors or in a well-ventilated area. Keep containers tightly
closed.
Response
If inhaled: Remove victim to fresh air and keep comfortable for breathing. Call a poison
center/doctor/physician if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
Storage
Store in a well-ventilated place. Store locked up. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
GHS Hazard and Precautionary Statement Codes: See Section 16
.
Section 3: Composition/Information on Ingredients
Chemical Product Name: Fiberglass fabric
Synonyms: Fibrous glass
Component CAS # Max % by weight
Glass, oxide, chemicals 65997-17-3 99.5
Fibrous glass dust * Not assigned Not assigned
Silane Coupling Agents
A
Not assigned 0.5
* Amount will be dependent upon method of handling
A Chemically bound to the fiberglass
Section 4: First-Aid Measures
Skin Contact: Flush with ample cool water followed by washing with mild soap to remove accumulated
fibers.
Eye Contact: Flush with flowing water for 15 minutes seek medical attention.
Inhalation: Move to fresh air.
Ingestion: Not likely to occur through normal use. Should ingestion occur, seek medical attention.
Most Important Symptoms/Effects: Direct skin contact with fibrous glass or its dust may cause
mechanical irritation and transitory dermatitis. Breathing of fibers or dust may cause
mechanical irritation of the mouth, nose, and throat.
Indication of Immediate Medical Attention and Special Treatment Needed: Get medical attention if
product comes into contact with skin or eyes, or if it is inhaled or ingested.
Section 5: Fire-Fighting Measures
Extinguishing Media: Water, dry powder, or foam (needed for packaging only).
Hazardous Combustion Products: Not applicable.
Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus and turn
out gear.
Fire Fighting Procedures/Precautions: Fiberglass itself will not support combustion, but in a sustained
fire, proper protection against products of combustion from the fuel must be worn.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 3 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 6: Accidental Release Measures
Personal Precautions: A release of this product is not expected to pose risks to workers under normal
circumstances. If the material is involved in a fire, or if dusts are produced, no action shall be
taken involving any personal risk or without suitable training. Keep unnecessary and
unprotected personnel from entering. Put on appropriate personal protective equipment.
Protective Equipment: Wear protective gloves/eye protection/skin protection.
Methods/Materials for Containment and Cleaning Up: Dust or loose fibers can be vacuumed or swept
with the aid of a dust suppressant. Dispose of in accordance with all government regulations.
Do not discharge into waterways or sewer systems without proper authority.
Section 7: Handling and Storage
Precautions: This product should be handled under conditions of good industrial hygiene and in conformity
with any local regulations to avoid unnecessary exposure. Use in a well-ventilated area. Do
not breathe dust. Avoid contact with skin.
Storage: Store in a well-ventilated, dry location.
Section 8: Exposure Controls/Personal Protection
Exposure Limits:
Component OSHA/PEL ACGIH/TLV
Fibrous dust 5 mg/m
3
5 mg/m
3
* Dust may be produced during handling
Engineering Controls: Normal area ventilation is sufficient in most cases to keep dust and fiber levels
below the TLV or PEL.
Personal Protection Measures/Equipment:
Skin Protection Barrier creams, gloves, and long sleeve loose fitting clothing may be required for
certain workers who have sensitive skin or contact dermatitis. Work clothing should be laundered
separately from other clothing before reuse.
Eye Protection Not normally required, but as a good safety work practice, eye protection such as
safety glasses/side shields or equivalent whenever use of the product releases airborne fibrous
glass.
Respiratory Protection If airborne fibrous glass exceeds the regulatory limits, or if upper
respiratory irritation occurs, use a N95 particulate filtering respirator.
Other Protection Observe good personal hygiene.
Section 9: Physical and Chemical Properties
Appearance (physical state, color, etc.): Solid, white
Odor: Odorless
Odor Threshold: None
pH: None
Melting Point/Freezing Point: >800 C (>1472 F)
Initial Boiling Point: Not applicable
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 4 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not applicable
Upper/Lower Flammability or Explosive Limits: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density/Specific Gravity: 2.4 to 2.7
Solubility: Insoluble
Partition Coefficient: Not known
Auto-ignition Temperature: Not known
Decomposition Temperature: Not known
Volatility: Not known
Viscosity: Not applicable
Section 10: Stability and Reactivity
Reactivity: Not self-reactive, water-reactive, or spontaneously combustible
Chemical Stability: This product is stable.
Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to Avoid: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible Materials: Not known
Hazardous Decomposition Products: Fiberglass products may release small amounts of acetic acid and
other organic materials at elevated temperatures.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
Symptoms: Causes mild skin irritation. May cause irritation of the mouth, nose, and throat after inhalation
exposure.
Delayed and Immediate Effects: Not known
Chronic Effects (Short and Long Term Exposure): Not known
Numerical Measures of Toxicity: None
Carcinogenicity: No ingredient is listed as a carcinogen by the NTP, IARC, or OSHA at 29 CFR 1910 Subpart
Z.
Mutagenicity: No data available
Reproductive Toxicity: No data available
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 5 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 12: Ecological Information
No data available
Section 13: Disposal Information
Do not discharge into waterways or sewer systems without proper authority. Dispose of in accordance with
all government regulations.
Section 14: Transport Information
Not regulated as a hazardous material/dangerous good for transportation in all modes of transportation (US
DOT, ICAO/IATA, IMO).
Section 15: Regulatory Information
TSCA Inventory Status: Exempt per section 8(a), 710.2(f), and 704.5(a)
SARA Title III Section 302: None
SARA Title III Section 304: None
SARA Title III Section 311/312 Hazard Categories: Immediate (acute)
SARA TITLE III Section 313: This product does not contain components that are subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986
(EPCRA or SARA Title III) and 40 CFR 372.
CERCLA RQ: Not listed
California Proposition 65: None known
Massachusetts Right-To-Know: Less than reportable quantity
New Jersey Right-To-Know: Less than reportable quantity
Pennsylvania Right-To-Know: Less than reportable quantity
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not
required to be listed on the Canadian DSL.
Europe: All components of this product are included on the European Inventory of Existing Commercial
Chemical Substances (EINECS) or are not required to be listed on the EINECS.
China: All components of this product are included on the Chinese Inventory (IECSC) or are not required
to be listed on the Chinese IECSC.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required
to be listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be
listed on the Korean ECL.
Philippines: All components of this product are included on the Philippine (PICCS) or are not required to
be listed on the Philippine PICCS.
Australia: All components of this product are included on the Australian (AICS) or are not required to be
listed on the Australian AICS.
Section 16: Other Information
This product is classified as a Skin Irritant Category 3; however OSHA does not include
Category 3 substances in its hazard classification system.
GHS Label Hazard Statement Codes
Signal Word: WARNING
H316: Causes mild skin irritation
H335: May cause respiratory tract irritation.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 6 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
GHS Label Precautionary Statement Codes
P261: Avoid breathing dusts or fibers.
P271: Use only outdoors or in well-ventilated area.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Abbreviations
ACGIH/TLV American Conference of Industrial Hygienists Threshold Limit Value
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR US Code of Federal Regulations
DOT US Department of Transportation
EPCRA Emergency Planning and Community Right to Know Act
GHS UN Globally Harmonized System of Classification and Labeling of Chemicals
HCS Hazard Communication Standard
IARC International Agency for Research on Cancer
ICAO/IATA International Civil Aviation Organization/International Air Transport Association
IMO/IMDG International Maritime Organization/International Maritime Dangerous Goods Code
LD50 Lethal dose to half of test animals
NTP National Toxicology Program
OSHA US Occupational Safety Health Administration
PEL Permissible exposure limit
RQ Reportable quantity
SARA Superfund Amendments and Reauthorization Act
SDS Safety data sheet
TSCA Toxic Substances Control Act
UN United Nations
US/USA United States
While this company believes that the data contained herein are factual and the opinions expressed are
based on tests and data believed to be reliable, it is the user’s responsibility to determine the safety,
toxicity, and suitability for his or her own use of the product described herein. Since the actual use by
others is beyond our control, no guarantee, expressed or implied, is made by this company as to the effects
of such use, the results to be obtained, or the safety and toxicity of the product, nor does this company
assume any liability arising out of use, by others, of the product referred to herein. Nor is the information
herein to be construed as absolutely complete since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances exist or because of applicable laws or
governmental regulations.
15I9G1835_SDS.pdf
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 1 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 1: Identification
Chemical Product Name/Identifier: All styles of fiberglass fabric
CAS Number: 65997-17-3
Synonyms: Fibrous glass
Recommended Use and Restrictions on Use:
Woven textile product used for reinforcement in various resin systems
Company Information: BGF Industries
230 Slayton Ave.
Danville, VA 24540
Telephone: 800-476-4845, 434-857-4400
Email: info@bgf.com
Website: http://www.bgf.com
Section 2: Hazards Identification
OSHA HCS Status: This product is a hazardous chemical, as defined by OSHA at 29 CFR
1910.1200.Hazards identified are based on hazards of the ingredients. The finished product has not been
tested.
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
OSHA/GHS Signal Word and Hazard Statements:
WARNING: Causes mild skin irritation. May cause respiratory irritation.
OSHA/GHS Classification and Pictograms:
Skin irritation (Hazard Category 3)
Specific target organ toxicity, single exposure: Respiratory tract irritation (Hazard Category 3)
OSHA/GHS Precautionary Statements:
Finish: 161 460 490 497A 508(A) 516W 558 602 608 617 621
627 636 639 642 643 644 646 650 655 657 660
770B 823D 830 845A 865S 905 929 939 967 978 984
F69 PT07 PT12 PT40 PT712 PT724 PT731 PT761 Z6040 A218 A252D
A303A A303B A330 A332A A332B A332C A332D A332E A358 A380 A412
A419 A427 A427A A427B A429A A429B A433 A433A A433B A433C A433D
A433E A433F A442 A443 A484B A741 A496 A803 A810 A851 A940
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 2 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Prevention
Avoid breathing fibers or dust. Use only outdoors or in a well-ventilated area. Keep containers tightly
closed.
Response
If inhaled: Remove victim to fresh air and keep comfortable for breathing. Call a poison
center/doctor/physician if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
Storage
Store in a well-ventilated place. Store locked up. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
GHS Hazard and Precautionary Statement Codes: See Section 16
.
Section 3: Composition/Information on Ingredients
Chemical Product Name: Fiberglass fabric
Synonyms: Fibrous glass
Component CAS # Max % by weight
Glass, oxide, chemicals 65997-17-3 99.5
Fibrous glass dust * Not assigned Not assigned
Silane Coupling Agents
A
Not assigned 0.5
* Amount will be dependent upon method of handling
A Chemically bound to the fiberglass
Section 4: First-Aid Measures
Skin Contact: Flush with ample cool water followed by washing with mild soap to remove accumulated
fibers.
Eye Contact: Flush with flowing water for 15 minutes seek medical attention.
Inhalation: Move to fresh air.
Ingestion: Not likely to occur through normal use. Should ingestion occur, seek medical attention.
Most Important Symptoms/Effects: Direct skin contact with fibrous glass or its dust may cause
mechanical irritation and transitory dermatitis. Breathing of fibers or dust may cause
mechanical irritation of the mouth, nose, and throat.
Indication of Immediate Medical Attention and Special Treatment Needed: Get medical attention if
product comes into contact with skin or eyes, or if it is inhaled or ingested.
Section 5: Fire-Fighting Measures
Extinguishing Media: Water, dry powder, or foam (needed for packaging only).
Hazardous Combustion Products: Not applicable.
Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus and turn
out gear.
Fire Fighting Procedures/Precautions: Fiberglass itself will not support combustion, but in a sustained
fire, proper protection against products of combustion from the fuel must be worn.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 3 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 6: Accidental Release Measures
Personal Precautions: A release of this product is not expected to pose risks to workers under normal
circumstances. If the material is involved in a fire, or if dusts are produced, no action shall be
taken involving any personal risk or without suitable training. Keep unnecessary and
unprotected personnel from entering. Put on appropriate personal protective equipment.
Protective Equipment: Wear protective gloves/eye protection/skin protection.
Methods/Materials for Containment and Cleaning Up: Dust or loose fibers can be vacuumed or swept
with the aid of a dust suppressant. Dispose of in accordance with all government regulations.
Do not discharge into waterways or sewer systems without proper authority.
Section 7: Handling and Storage
Precautions: This product should be handled under conditions of good industrial hygiene and in conformity
with any local regulations to avoid unnecessary exposure. Use in a well-ventilated area. Do
not breathe dust. Avoid contact with skin.
Storage: Store in a well-ventilated, dry location.
Section 8: Exposure Controls/Personal Protection
Exposure Limits:
Component OSHA/PEL ACGIH/TLV
Fibrous dust 5 mg/m
3
5 mg/m
3
* Dust may be produced during handling
Engineering Controls: Normal area ventilation is sufficient in most cases to keep dust and fiber levels
below the TLV or PEL.
Personal Protection Measures/Equipment:
Skin Protection Barrier creams, gloves, and long sleeve loose fitting clothing may be required for
certain workers who have sensitive skin or contact dermatitis. Work clothing should be laundered
separately from other clothing before reuse.
Eye Protection Not normally required, but as a good safety work practice, eye protection such as
safety glasses/side shields or equivalent whenever use of the product releases airborne fibrous
glass.
Respiratory Protection If airborne fibrous glass exceeds the regulatory limits, or if upper
respiratory irritation occurs, use a N95 particulate filtering respirator.
Other Protection Observe good personal hygiene.
Section 9: Physical and Chemical Properties
Appearance (physical state, color, etc.): Solid, white
Odor: Odorless
Odor Threshold: None
pH: None
Melting Point/Freezing Point: >800 C (>1472 F)
Initial Boiling Point: Not applicable
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 4 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not applicable
Upper/Lower Flammability or Explosive Limits: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density/Specific Gravity: 2.4 to 2.7
Solubility: Insoluble
Partition Coefficient: Not known
Auto-ignition Temperature: Not known
Decomposition Temperature: Not known
Volatility: Not known
Viscosity: Not applicable
Section 10: Stability and Reactivity
Reactivity: Not self-reactive, water-reactive, or spontaneously combustible
Chemical Stability: This product is stable.
Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to Avoid: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible Materials: Not known
Hazardous Decomposition Products: Fiberglass products may release small amounts of acetic acid and
other organic materials at elevated temperatures.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
Symptoms: Causes mild skin irritation. May cause irritation of the mouth, nose, and throat after inhalation
exposure.
Delayed and Immediate Effects: Not known
Chronic Effects (Short and Long Term Exposure): Not known
Numerical Measures of Toxicity: None
Carcinogenicity: No ingredient is listed as a carcinogen by the NTP, IARC, or OSHA at 29 CFR 1910 Subpart
Z.
Mutagenicity: No data available
Reproductive Toxicity: No data available
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 5 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 12: Ecological Information
No data available
Section 13: Disposal Information
Do not discharge into waterways or sewer systems without proper authority. Dispose of in accordance with
all government regulations.
Section 14: Transport Information
Not regulated as a hazardous material/dangerous good for transportation in all modes of transportation (US
DOT, ICAO/IATA, IMO).
Section 15: Regulatory Information
TSCA Inventory Status: Exempt per section 8(a), 710.2(f), and 704.5(a)
SARA Title III Section 302: None
SARA Title III Section 304: None
SARA Title III Section 311/312 Hazard Categories: Immediate (acute)
SARA TITLE III Section 313: This product does not contain components that are subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986
(EPCRA or SARA Title III) and 40 CFR 372.
CERCLA RQ: Not listed
California Proposition 65: None known
Massachusetts Right-To-Know: Less than reportable quantity
New Jersey Right-To-Know: Less than reportable quantity
Pennsylvania Right-To-Know: Less than reportable quantity
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not
required to be listed on the Canadian DSL.
Europe: All components of this product are included on the European Inventory of Existing Commercial
Chemical Substances (EINECS) or are not required to be listed on the EINECS.
China: All components of this product are included on the Chinese Inventory (IECSC) or are not required
to be listed on the Chinese IECSC.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required
to be listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be
listed on the Korean ECL.
Philippines: All components of this product are included on the Philippine (PICCS) or are not required to
be listed on the Philippine PICCS.
Australia: All components of this product are included on the Australian (AICS) or are not required to be
listed on the Australian AICS.
Section 16: Other Information
This product is classified as a Skin Irritant Category 3; however OSHA does not include
Category 3 substances in its hazard classification system.
GHS Label Hazard Statement Codes
Signal Word: WARNING
H316: Causes mild skin irritation
H335: May cause respiratory tract irritation.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 6 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
GHS Label Precautionary Statement Codes
P261: Avoid breathing dusts or fibers.
P271: Use only outdoors or in well-ventilated area.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Abbreviations
ACGIH/TLV American Conference of Industrial Hygienists Threshold Limit Value
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR US Code of Federal Regulations
DOT US Department of Transportation
EPCRA Emergency Planning and Community Right to Know Act
GHS UN Globally Harmonized System of Classification and Labeling of Chemicals
HCS Hazard Communication Standard
IARC International Agency for Research on Cancer
ICAO/IATA International Civil Aviation Organization/International Air Transport Association
IMO/IMDG International Maritime Organization/International Maritime Dangerous Goods Code
LD50 Lethal dose to half of test animals
NTP National Toxicology Program
OSHA US Occupational Safety Health Administration
PEL Permissible exposure limit
RQ Reportable quantity
SARA Superfund Amendments and Reauthorization Act
SDS Safety data sheet
TSCA Toxic Substances Control Act
UN United Nations
US/USA United States
While this company believes that the data contained herein are factual and the opinions expressed are
based on tests and data believed to be reliable, it is the user’s responsibility to determine the safety,
toxicity, and suitability for his or her own use of the product described herein. Since the actual use by
others is beyond our control, no guarantee, expressed or implied, is made by this company as to the effects
of such use, the results to be obtained, or the safety and toxicity of the product, nor does this company
assume any liability arising out of use, by others, of the product referred to herein. Nor is the information
herein to be construed as absolutely complete since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances exist or because of applicable laws or
governmental regulations.
15I9G1825_SDS.pdf
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 1 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 1: Identification
Chemical Product Name/Identifier: All styles of fiberglass fabric
CAS Number: 65997-17-3
Synonyms: Fibrous glass
Recommended Use and Restrictions on Use:
Woven textile product used for reinforcement in various resin systems
Company Information: BGF Industries
230 Slayton Ave.
Danville, VA 24540
Telephone: 800-476-4845, 434-857-4400
Email: info@bgf.com
Website: http://www.bgf.com
Section 2: Hazards Identification
OSHA HCS Status: This product is a hazardous chemical, as defined by OSHA at 29 CFR
1910.1200.Hazards identified are based on hazards of the ingredients. The finished product has not been
tested.
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
OSHA/GHS Signal Word and Hazard Statements:
WARNING: Causes mild skin irritation. May cause respiratory irritation.
OSHA/GHS Classification and Pictograms:
Skin irritation (Hazard Category 3)
Specific target organ toxicity, single exposure: Respiratory tract irritation (Hazard Category 3)
OSHA/GHS Precautionary Statements:
Finish: 161 460 490 497A 508(A) 516W 558 602 608 617 621
627 636 639 642 643 644 646 650 655 657 660
770B 823D 830 845A 865S 905 929 939 967 978 984
F69 PT07 PT12 PT40 PT712 PT724 PT731 PT761 Z6040 A218 A252D
A303A A303B A330 A332A A332B A332C A332D A332E A358 A380 A412
A419 A427 A427A A427B A429A A429B A433 A433A A433B A433C A433D
A433E A433F A442 A443 A484B A741 A496 A803 A810 A851 A940
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 2 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Prevention
Avoid breathing fibers or dust. Use only outdoors or in a well-ventilated area. Keep containers tightly
closed.
Response
If inhaled: Remove victim to fresh air and keep comfortable for breathing. Call a poison
center/doctor/physician if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
Storage
Store in a well-ventilated place. Store locked up. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
GHS Hazard and Precautionary Statement Codes: See Section 16
.
Section 3: Composition/Information on Ingredients
Chemical Product Name: Fiberglass fabric
Synonyms: Fibrous glass
Component CAS # Max % by weight
Glass, oxide, chemicals 65997-17-3 99.5
Fibrous glass dust * Not assigned Not assigned
Silane Coupling Agents
A
Not assigned 0.5
* Amount will be dependent upon method of handling
A Chemically bound to the fiberglass
Section 4: First-Aid Measures
Skin Contact: Flush with ample cool water followed by washing with mild soap to remove accumulated
fibers.
Eye Contact: Flush with flowing water for 15 minutes seek medical attention.
Inhalation: Move to fresh air.
Ingestion: Not likely to occur through normal use. Should ingestion occur, seek medical attention.
Most Important Symptoms/Effects: Direct skin contact with fibrous glass or its dust may cause
mechanical irritation and transitory dermatitis. Breathing of fibers or dust may cause
mechanical irritation of the mouth, nose, and throat.
Indication of Immediate Medical Attention and Special Treatment Needed: Get medical attention if
product comes into contact with skin or eyes, or if it is inhaled or ingested.
Section 5: Fire-Fighting Measures
Extinguishing Media: Water, dry powder, or foam (needed for packaging only).
Hazardous Combustion Products: Not applicable.
Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus and turn
out gear.
Fire Fighting Procedures/Precautions: Fiberglass itself will not support combustion, but in a sustained
fire, proper protection against products of combustion from the fuel must be worn.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 3 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 6: Accidental Release Measures
Personal Precautions: A release of this product is not expected to pose risks to workers under normal
circumstances. If the material is involved in a fire, or if dusts are produced, no action shall be
taken involving any personal risk or without suitable training. Keep unnecessary and
unprotected personnel from entering. Put on appropriate personal protective equipment.
Protective Equipment: Wear protective gloves/eye protection/skin protection.
Methods/Materials for Containment and Cleaning Up: Dust or loose fibers can be vacuumed or swept
with the aid of a dust suppressant. Dispose of in accordance with all government regulations.
Do not discharge into waterways or sewer systems without proper authority.
Section 7: Handling and Storage
Precautions: This product should be handled under conditions of good industrial hygiene and in conformity
with any local regulations to avoid unnecessary exposure. Use in a well-ventilated area. Do
not breathe dust. Avoid contact with skin.
Storage: Store in a well-ventilated, dry location.
Section 8: Exposure Controls/Personal Protection
Exposure Limits:
Component OSHA/PEL ACGIH/TLV
Fibrous dust 5 mg/m
3
5 mg/m
3
* Dust may be produced during handling
Engineering Controls: Normal area ventilation is sufficient in most cases to keep dust and fiber levels
below the TLV or PEL.
Personal Protection Measures/Equipment:
Skin Protection Barrier creams, gloves, and long sleeve loose fitting clothing may be required for
certain workers who have sensitive skin or contact dermatitis. Work clothing should be laundered
separately from other clothing before reuse.
Eye Protection Not normally required, but as a good safety work practice, eye protection such as
safety glasses/side shields or equivalent whenever use of the product releases airborne fibrous
glass.
Respiratory Protection If airborne fibrous glass exceeds the regulatory limits, or if upper
respiratory irritation occurs, use a N95 particulate filtering respirator.
Other Protection Observe good personal hygiene.
Section 9: Physical and Chemical Properties
Appearance (physical state, color, etc.): Solid, white
Odor: Odorless
Odor Threshold: None
pH: None
Melting Point/Freezing Point: >800 C (>1472 F)
Initial Boiling Point: Not applicable
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 4 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not applicable
Upper/Lower Flammability or Explosive Limits: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density/Specific Gravity: 2.4 to 2.7
Solubility: Insoluble
Partition Coefficient: Not known
Auto-ignition Temperature: Not known
Decomposition Temperature: Not known
Volatility: Not known
Viscosity: Not applicable
Section 10: Stability and Reactivity
Reactivity: Not self-reactive, water-reactive, or spontaneously combustible
Chemical Stability: This product is stable.
Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to Avoid: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible Materials: Not known
Hazardous Decomposition Products: Fiberglass products may release small amounts of acetic acid and
other organic materials at elevated temperatures.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
Symptoms: Causes mild skin irritation. May cause irritation of the mouth, nose, and throat after inhalation
exposure.
Delayed and Immediate Effects: Not known
Chronic Effects (Short and Long Term Exposure): Not known
Numerical Measures of Toxicity: None
Carcinogenicity: No ingredient is listed as a carcinogen by the NTP, IARC, or OSHA at 29 CFR 1910 Subpart
Z.
Mutagenicity: No data available
Reproductive Toxicity: No data available
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 5 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 12: Ecological Information
No data available
Section 13: Disposal Information
Do not discharge into waterways or sewer systems without proper authority. Dispose of in accordance with
all government regulations.
Section 14: Transport Information
Not regulated as a hazardous material/dangerous good for transportation in all modes of transportation (US
DOT, ICAO/IATA, IMO).
Section 15: Regulatory Information
TSCA Inventory Status: Exempt per section 8(a), 710.2(f), and 704.5(a)
SARA Title III Section 302: None
SARA Title III Section 304: None
SARA Title III Section 311/312 Hazard Categories: Immediate (acute)
SARA TITLE III Section 313: This product does not contain components that are subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986
(EPCRA or SARA Title III) and 40 CFR 372.
CERCLA RQ: Not listed
California Proposition 65: None known
Massachusetts Right-To-Know: Less than reportable quantity
New Jersey Right-To-Know: Less than reportable quantity
Pennsylvania Right-To-Know: Less than reportable quantity
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not
required to be listed on the Canadian DSL.
Europe: All components of this product are included on the European Inventory of Existing Commercial
Chemical Substances (EINECS) or are not required to be listed on the EINECS.
China: All components of this product are included on the Chinese Inventory (IECSC) or are not required
to be listed on the Chinese IECSC.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required
to be listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be
listed on the Korean ECL.
Philippines: All components of this product are included on the Philippine (PICCS) or are not required to
be listed on the Philippine PICCS.
Australia: All components of this product are included on the Australian (AICS) or are not required to be
listed on the Australian AICS.
Section 16: Other Information
This product is classified as a Skin Irritant Category 3; however OSHA does not include
Category 3 substances in its hazard classification system.
GHS Label Hazard Statement Codes
Signal Word: WARNING
H316: Causes mild skin irritation
H335: May cause respiratory tract irritation.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 6 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
GHS Label Precautionary Statement Codes
P261: Avoid breathing dusts or fibers.
P271: Use only outdoors or in well-ventilated area.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Abbreviations
ACGIH/TLV American Conference of Industrial Hygienists Threshold Limit Value
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR US Code of Federal Regulations
DOT US Department of Transportation
EPCRA Emergency Planning and Community Right to Know Act
GHS UN Globally Harmonized System of Classification and Labeling of Chemicals
HCS Hazard Communication Standard
IARC International Agency for Research on Cancer
ICAO/IATA International Civil Aviation Organization/International Air Transport Association
IMO/IMDG International Maritime Organization/International Maritime Dangerous Goods Code
LD50 Lethal dose to half of test animals
NTP National Toxicology Program
OSHA US Occupational Safety Health Administration
PEL Permissible exposure limit
RQ Reportable quantity
SARA Superfund Amendments and Reauthorization Act
SDS Safety data sheet
TSCA Toxic Substances Control Act
UN United Nations
US/USA United States
While this company believes that the data contained herein are factual and the opinions expressed are
based on tests and data believed to be reliable, it is the user’s responsibility to determine the safety,
toxicity, and suitability for his or her own use of the product described herein. Since the actual use by
others is beyond our control, no guarantee, expressed or implied, is made by this company as to the effects
of such use, the results to be obtained, or the safety and toxicity of the product, nor does this company
assume any liability arising out of use, by others, of the product referred to herein. Nor is the information
herein to be construed as absolutely complete since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances exist or because of applicable laws or
governmental regulations.
15I9F9230A_SDS.pdf
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 1 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 1: Identification
Chemical Product Name/Identifier: All styles of fiberglass fabric
CAS Number: 65997-17-3
Synonyms: Fibrous glass
Recommended Use and Restrictions on Use:
Woven textile product used for reinforcement in various resin systems
Company Information: BGF Industries
230 Slayton Ave.
Danville, VA 24540
Telephone: 800-476-4845, 434-857-4400
Email: info@bgf.com
Website: http://www.bgf.com
Section 2: Hazards Identification
OSHA HCS Status: This product is a hazardous chemical, as defined by OSHA at 29 CFR
1910.1200.Hazards identified are based on hazards of the ingredients. The finished product has not been
tested.
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
OSHA/GHS Signal Word and Hazard Statements:
WARNING: Causes mild skin irritation. May cause respiratory irritation.
OSHA/GHS Classification and Pictograms:
Skin irritation (Hazard Category 3)
Specific target organ toxicity, single exposure: Respiratory tract irritation (Hazard Category 3)
OSHA/GHS Precautionary Statements:
Finish: 161 460 490 497A 508(A) 516W 558 602 608 617 621
627 636 639 642 643 644 646 650 655 657 660
770B 823D 830 845A 865S 905 929 939 967 978 984
F69 PT07 PT12 PT40 PT712 PT724 PT731 PT761 Z6040 A218 A252D
A303A A303B A330 A332A A332B A332C A332D A332E A358 A380 A412
A419 A427 A427A A427B A429A A429B A433 A433A A433B A433C A433D
A433E A433F A442 A443 A484B A741 A496 A803 A810 A851 A940
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 2 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Prevention
Avoid breathing fibers or dust. Use only outdoors or in a well-ventilated area. Keep containers tightly
closed.
Response
If inhaled: Remove victim to fresh air and keep comfortable for breathing. Call a poison
center/doctor/physician if you feel unwell.
If skin irritation occurs: Get medical advice/attention.
Storage
Store in a well-ventilated place. Store locked up. Keep container tightly closed.
Disposal
Dispose of contents/container in accordance with local/regional/national/international regulations.
GHS Hazard and Precautionary Statement Codes: See Section 16
.
Section 3: Composition/Information on Ingredients
Chemical Product Name: Fiberglass fabric
Synonyms: Fibrous glass
Component CAS # Max % by weight
Glass, oxide, chemicals 65997-17-3 99.5
Fibrous glass dust * Not assigned Not assigned
Silane Coupling Agents
A
Not assigned 0.5
* Amount will be dependent upon method of handling
A Chemically bound to the fiberglass
Section 4: First-Aid Measures
Skin Contact: Flush with ample cool water followed by washing with mild soap to remove accumulated
fibers.
Eye Contact: Flush with flowing water for 15 minutes seek medical attention.
Inhalation: Move to fresh air.
Ingestion: Not likely to occur through normal use. Should ingestion occur, seek medical attention.
Most Important Symptoms/Effects: Direct skin contact with fibrous glass or its dust may cause
mechanical irritation and transitory dermatitis. Breathing of fibers or dust may cause
mechanical irritation of the mouth, nose, and throat.
Indication of Immediate Medical Attention and Special Treatment Needed: Get medical attention if
product comes into contact with skin or eyes, or if it is inhaled or ingested.
Section 5: Fire-Fighting Measures
Extinguishing Media: Water, dry powder, or foam (needed for packaging only).
Hazardous Combustion Products: Not applicable.
Protective Equipment: Firefighters should be equipped with self-contained breathing apparatus and turn
out gear.
Fire Fighting Procedures/Precautions: Fiberglass itself will not support combustion, but in a sustained
fire, proper protection against products of combustion from the fuel must be worn.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 3 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 6: Accidental Release Measures
Personal Precautions: A release of this product is not expected to pose risks to workers under normal
circumstances. If the material is involved in a fire, or if dusts are produced, no action shall be
taken involving any personal risk or without suitable training. Keep unnecessary and
unprotected personnel from entering. Put on appropriate personal protective equipment.
Protective Equipment: Wear protective gloves/eye protection/skin protection.
Methods/Materials for Containment and Cleaning Up: Dust or loose fibers can be vacuumed or swept
with the aid of a dust suppressant. Dispose of in accordance with all government regulations.
Do not discharge into waterways or sewer systems without proper authority.
Section 7: Handling and Storage
Precautions: This product should be handled under conditions of good industrial hygiene and in conformity
with any local regulations to avoid unnecessary exposure. Use in a well-ventilated area. Do
not breathe dust. Avoid contact with skin.
Storage: Store in a well-ventilated, dry location.
Section 8: Exposure Controls/Personal Protection
Exposure Limits:
Component OSHA/PEL ACGIH/TLV
Fibrous dust 5 mg/m
3
5 mg/m
3
* Dust may be produced during handling
Engineering Controls: Normal area ventilation is sufficient in most cases to keep dust and fiber levels
below the TLV or PEL.
Personal Protection Measures/Equipment:
Skin Protection Barrier creams, gloves, and long sleeve loose fitting clothing may be required for
certain workers who have sensitive skin or contact dermatitis. Work clothing should be laundered
separately from other clothing before reuse.
Eye Protection Not normally required, but as a good safety work practice, eye protection such as
safety glasses/side shields or equivalent whenever use of the product releases airborne fibrous
glass.
Respiratory Protection If airborne fibrous glass exceeds the regulatory limits, or if upper
respiratory irritation occurs, use a N95 particulate filtering respirator.
Other Protection Observe good personal hygiene.
Section 9: Physical and Chemical Properties
Appearance (physical state, color, etc.): Solid, white
Odor: Odorless
Odor Threshold: None
pH: None
Melting Point/Freezing Point: >800 C (>1472 F)
Initial Boiling Point: Not applicable
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 4 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not applicable
Upper/Lower Flammability or Explosive Limits: Not applicable
Vapor Pressure: Not applicable
Vapor Density: Not applicable
Relative Density/Specific Gravity: 2.4 to 2.7
Solubility: Insoluble
Partition Coefficient: Not known
Auto-ignition Temperature: Not known
Decomposition Temperature: Not known
Volatility: Not known
Viscosity: Not applicable
Section 10: Stability and Reactivity
Reactivity: Not self-reactive, water-reactive, or spontaneously combustible
Chemical Stability: This product is stable.
Hazardous Reactions: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to Avoid: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible Materials: Not known
Hazardous Decomposition Products: Fiberglass products may release small amounts of acetic acid and
other organic materials at elevated temperatures.
Hazardous Polymerization: Will not occur
Section 11: Toxicological Information
Relevant Route of Exposure/Target Organs: Dermal, Inhalation
Symptoms: Causes mild skin irritation. May cause irritation of the mouth, nose, and throat after inhalation
exposure.
Delayed and Immediate Effects: Not known
Chronic Effects (Short and Long Term Exposure): Not known
Numerical Measures of Toxicity: None
Carcinogenicity: No ingredient is listed as a carcinogen by the NTP, IARC, or OSHA at 29 CFR 1910 Subpart
Z.
Mutagenicity: No data available
Reproductive Toxicity: No data available
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 5 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
Section 12: Ecological Information
No data available
Section 13: Disposal Information
Do not discharge into waterways or sewer systems without proper authority. Dispose of in accordance with
all government regulations.
Section 14: Transport Information
Not regulated as a hazardous material/dangerous good for transportation in all modes of transportation (US
DOT, ICAO/IATA, IMO).
Section 15: Regulatory Information
TSCA Inventory Status: Exempt per section 8(a), 710.2(f), and 704.5(a)
SARA Title III Section 302: None
SARA Title III Section 304: None
SARA Title III Section 311/312 Hazard Categories: Immediate (acute)
SARA TITLE III Section 313: This product does not contain components that are subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right to Know Act of 1986
(EPCRA or SARA Title III) and 40 CFR 372.
CERCLA RQ: Not listed
California Proposition 65: None known
Massachusetts Right-To-Know: Less than reportable quantity
New Jersey Right-To-Know: Less than reportable quantity
Pennsylvania Right-To-Know: Less than reportable quantity
Canada: All components of this product are included on the Domestic Substances List (DSL) or are not
required to be listed on the Canadian DSL.
Europe: All components of this product are included on the European Inventory of Existing Commercial
Chemical Substances (EINECS) or are not required to be listed on the EINECS.
China: All components of this product are included on the Chinese Inventory (IECSC) or are not required
to be listed on the Chinese IECSC.
Japan: All components of this product are included on the Japanese (ENCS) inventory or are not required
to be listed on the Japanese inventory.
Korea: All components of this product are included on the Korean (ECL) inventory or are not required to be
listed on the Korean ECL.
Philippines: All components of this product are included on the Philippine (PICCS) or are not required to
be listed on the Philippine PICCS.
Australia: All components of this product are included on the Australian (AICS) or are not required to be
listed on the Australian AICS.
Section 16: Other Information
This product is classified as a Skin Irritant Category 3; however OSHA does not include
Category 3 substances in its hazard classification system.
GHS Label Hazard Statement Codes
Signal Word: WARNING
H316: Causes mild skin irritation
H335: May cause respiratory tract irritation.
SAFETY DATA SHEET
SDS Ref # BGF-001
Prepared: 8/03/2020
Revised: 6/23/2022
Page 6 of 6
Inspired by Innovation :: Driven by Excellence
BGF INDUSTRIES, INC. 230 Slayton Ave Suite A-1 Danville, Virginia 24540 USA
434-857-4400 toll free: 800-476-4845
www. bgf.com info@bgf.com
GHS Label Precautionary Statement Codes
P261: Avoid breathing dusts or fibers.
P271: Use only outdoors or in well-ventilated area.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P332+P313: If skin irritation occurs: Get medical advice/attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Abbreviations
ACGIH/TLV American Conference of Industrial Hygienists Threshold Limit Value
CAS Chemical Abstracts Service
CERCLA Comprehensive Environmental Response Compensation and Liability Act
CFR US Code of Federal Regulations
DOT US Department of Transportation
EPCRA Emergency Planning and Community Right to Know Act
GHS UN Globally Harmonized System of Classification and Labeling of Chemicals
HCS Hazard Communication Standard
IARC International Agency for Research on Cancer
ICAO/IATA International Civil Aviation Organization/International Air Transport Association
IMO/IMDG International Maritime Organization/International Maritime Dangerous Goods Code
LD50 Lethal dose to half of test animals
NTP National Toxicology Program
OSHA US Occupational Safety Health Administration
PEL Permissible exposure limit
RQ Reportable quantity
SARA Superfund Amendments and Reauthorization Act
SDS Safety data sheet
TSCA Toxic Substances Control Act
UN United Nations
US/USA United States
While this company believes that the data contained herein are factual and the opinions expressed are
based on tests and data believed to be reliable, it is the user’s responsibility to determine the safety,
toxicity, and suitability for his or her own use of the product described herein. Since the actual use by
others is beyond our control, no guarantee, expressed or implied, is made by this company as to the effects
of such use, the results to be obtained, or the safety and toxicity of the product, nor does this company
assume any liability arising out of use, by others, of the product referred to herein. Nor is the information
herein to be construed as absolutely complete since additional information may be necessary or desirable
when particular or exceptional conditions or circumstances exist or because of applicable laws or
governmental regulations.
15H2550M77A_SDS.pdf
Revision date: 12/5/2017 Revision: 0
SAFETY DATA SHEET
HexPly M77HF
1. Identification
Product identifier
Product name HexPly M77HF
Chemical name Modified Epoxy Resin Prepreg
Product number 21260US-2
Recommended use of the chemical and restrictions on use
Application Formulated product for Industrial applications
Uses advised against Use only for intended applications.
Details of the supplier of the safety data sheet
Supplier Hexcel Composites
6700 West 5400 South
West Valley City
UT 84118-7678
USA
Tel: ++801 252 3400
Tel: ++800 987 0658
Contact Person 6700 West 5400 South, West Valley City, Utah USA++801 252 3400, 11711 Dublin Blvd,
Dublin, California, USA. ++925 551 4900, SDSUSOffice@hexcel.com
Emergency telephone number
Emergency telephone To be used only for advice on chemical emergencies, spillages, fires or First Aid:
For emergencies in US/Canada: CHEMTREC 800 424 9300
For emergencies in rest of the world: CARECHEM24 +44 (0) 1235 239 670
2. Hazard(s) identification
Classification of the substance or mixture
OSHA Regulatory Status This Product is Hazardous under the OSHA Hazard Communication Standard.
Physical hazards Combustible Dust – USH01
Health hazards Skin Irrit. 2 – H315 Eye Irrit. 2A – H319 Resp. Sens. 1 – H334 Skin Sens. 1 – H317
Environmental hazards Not Classified
Physicochemical Warning! Heating may cause a fire
Label elements
Pictogram
Signal word Danger
1/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Hazard statements H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
USH01 May form combustible dust concentrations in air.
Precautionary statements P261 Avoid breathing vapor/ spray.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P302+P352 If on skin: Wash with plenty of water.
P304+P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P273 Avoid release to the environment.
Contains EPOXY RESIN (Number average MW <= 700 ), EPOXY PHENOL NOVOLAK RESIN
Other hazards
Warning! Will become self-reactive under conditions of excessive temperature resulting an uncontrolled exothermic reaction.
Warning! May cause eye, skin and upper respiratory tract irritation, allergic skin reaction, dermatitis and possible
sensitization. Vapor or fumes evolved during use and/or heating or curing the product may cause respiratory tract and eye
irritation. Dust or particulates from machining, grinding or sawing the cured product may causes skin, eye and upper
respiratory tract irritation, allergic skin reaction and possible sensitization.
3. Composition/information on ingredients
Mixtures
EPOXY RESIN (Number average MW <= 700 ) 30-60%
CAS number: 25068-38-6
Classification
Skin Irrit. 2 - H315
Eye Irrit. 2A - H319
Skin Sens. 1 - H317
Aquatic Chronic 2 - H411
EPOXY PHENOL NOVOLAK RESIN 30-60%
CAS number: 28064-14-4
Classification
Skin Irrit. 2 - H315
Eye Irrit. 2A - H319
Skin Sens. 1 - H317
Aquatic Chronic 2 - H411
The full text for all hazard statements is displayed in Section 16.
Composition comments The exact percentage (concentration) of composition has been withheld as a trade secret in
accordance with 29 CFR 1910.1200.
4. First-aid measures
Description of first aid measures
Inhalation With any sign of respiratory distress, affected persons should be taken into fresh air, and
made to rest while medical attention is sought.
2/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Ingestion Immediately rinse the mouth repeatedly with water, if swallowing has occurred, do not induce
vomiting. If requested, give affected person sips of water. Seek medical attention immediately.
If vomiting does occur do not allow the affected person to inhale their vomit. Do not give
anything by mouth to an unconscious person.
Skin Contact With uncured material, immediately wash the affected area with warm, soapy water then clean
the skin with resin removing cream, followed by further washing with warm soapy water. Do
not use solvents. If irritation persists, seek medical attention.
Eye contact Flush with water for at least 15 minutes and seek medical attention if irritation persists.
Most important symptoms and effects, both acute and delayed
Inhalation Inhalation of dust during cutting, grinding or sanding operations involving this product may
cause irritation of the respiratory tract.
Skin contact Contact with dust may cause mechanical irritation.
Indication of immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations. If in doubt, get medical attention promptly.
5. Fire-fighting measures
Extinguishing media
Suitable extinguishing mediaExtinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
Special hazards arising from the substance or mixture
Specific hazards Warning! Dust generated from machining, grinding or sanding the cured product may be
combustible and could result in fire and/or explosion should the necessary dust concentration
in air and ignition source be present. Refer to section 10 for further details. Carbon fibers
contained in some products are electrically conductive and if released during combustion may
present a hazard to unprotected electrical apparatus.
Hazardous combustion
products
The products of combustion and decomposition depend on other materials present in the fire
and the actual conditions of the fire. Burning will release carbon dioxide, water, carbon
monoxide and compounds of nitrogen.
Advice for firefighters
Special protective equipment
for firefighters
Avoid exposure through use of a self-contained, positive-pressure breathing apparatus.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions Wear suitable protective equipment, including gloves, goggles/face shield, respirator, boots,
clothing or apron, as appropriate.
Environmental precautions
Environmental precautionsDue to the physical nature of this product, environmental release to drains and water courses
is not possible.
Methods and material for containment and cleaning up
Methods for cleaning up Collect and place in suitable waste disposal containers and seal securely. For waste disposal,
see Section 13.
3/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Reference to other sectionsFor personal protection, see Section 8. For waste disposal, see Section 13.
7. Handling and storage
Precautions for safe handling
Usage precautions Wash at the end of each work shift and before eating, smoking and using the toilet. Promptly
remove any clothing that becomes contaminated. When using, do not eat, drink or smoke.
Carbon fibers contained in some products are electrically conductive and if released during
combustion may present a hazard to unprotected electrical apparatus.
Conditions for safe storage, including any incompatibilities
Storage precautions Keep container tightly closed and dry. See label on the container for the proper storage
temperature.
Specific end uses(s)
Specific end use(s) As this product is an article, this section is not applicable.
8. Exposure Controls/personal protection
Exposure controls
Protective equipment
Appropriate engineering
controls
Provide adequate general and local exhaust ventilation.
Eye/face protection Wear approved safety spectacles, goggles or facemask.
Hand protection Avoid skin contact by use of impermeable gloves when handling the product. To protect
hands from chemicals, gloves should comply with OSHA 1910.138 and be demonstrated to
be imprevious to the chemical and resist degradation. The most suitable glove should be
chosen in consultation with the glove supplier/manufacturer, who can provide information
about the breakthrough time of the glove material.
Other skin and body
protection
Ensure forearms are protected by use of gloves with long gauntlet, disposable sleeves or long
sleeve overalls.
Hygiene measures Wash hands after handling.
Respiratory protection Local exhaust ventilation or an approved respirator should be used where fumes from hot
material, or dust from machining cured material arise.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Appearance Flexible resin film containing continuous fibers of glass, carbon or aramid in unidirectional or
woven fabric form. Product is protected by colored polyethylene or release paper.
Color Black.
Odor Mild (or faint).
Odor threshold No information available.
pH No information available.
Melting point No information available.
4/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Initial boiling point and rangeNo information available.
Flash point No information available.
Evaporation rate No information available.
Evaporation factor No information available.
Flammability (solid, gas)No information available.
Upper/lower flammability or
explosive limits
Not relevant due to the physical form of this product.
Vapor pressure No information available.
Vapor density No information available.
Relative density No information available.
Bulk density Not relevant due to the physical form of this product.
Solubility(ies) No information available.
Partition coefficient Technically not feasible.
Auto-ignition temperatureNot relevant due to the physical form of this product.
Decomposition TemperatureHeating above 300 C - thermal decomposition giving toxic and corrosive products: Carbon
Monoxide, Ammonia, Amino derivatives, Carbon Oxides, Hydrogen Cyanide (hydrocyanic
acid), (traces)
Viscosity Not relevant due to the physical form of this product.
Explosive properties Does not meet the criteria for classification as explosive.
Oxidizing properties Does not meet the criteria for classification as oxidizing.
Comments The indicated values do not necessarily correspond to the product specification. Please refer
to the technical data sheet for specification data.
Other information No information required.
10. Stability and reactivity
Reactivity Refer to section 10.3 for further details.
Stability Stable under proper handling and storage conditions.
Possibility of hazardous
reactions
Will not occur under proper conditions of use. Rapid heating of the product in bulk may
produce an uncontrolled exothermic reaction that may char and decompose the size,
generating unidentified gases and vapors that may be toxic. Avoid inhalation.
Conditions to avoid Avoid heat, flames and other sources of ignition. May form combustible dust concentrations in
air
Materials to avoid Strong oxidizing agents.
Hazardous decomposition
products
Thermal decomposition and burning may release oxides of carbon, nitrogen and sulphur. The
composition of gases/vapors/by-products generated during decomposition will vary depending
on temperature conditions, temperature rate of rise and the presence of other chemicals in the
vicinity that may react with the product. Gases/vapors/by-products should be regarded as
toxic.
5/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
11. Toxicological information
Information on toxicological effects
Toxicological effects This product has not been tested. Judgements on the expected toxicity of this product have
been made based upon consideration of its major components.
Acute toxicity - oral
Notes (oral LD ) Based on available data the classification criteria are not met.
Acute toxicity - dermal
Notes (dermal LD ) Based on available data the classification criteria are not met.
Acute toxicity - inhalation
Notes (inhalation LC ) Based on available data the classification criteria are not met.
Skin corrosion/irritation
Skin corrosion/irritationCauses skin irritation.
Serious eye damage/irritation
Serious eye damage/irritationCauses serious eye irritation.
Respiratory sensitization
Respiratory sensitizationMay cause allergy or asthma symptoms or breathing difficulties if inhaled.
Skin sensitization
Skin sensitization May cause an allergic skin reaction.
Germ cell mutagenicity
Genotoxicity - in vitro Based on available data the classification criteria are not met.
Carcinogenicity
Carcinogenicity Based on available data the classification criteria are not met.
Reproductive toxicity
Reproductive toxicity - fertilityBased on available data the classification criteria are not met.
Specific target organ toxicity - single exposure
STOT - single exposure Based on available data the classification criteria are not met.
Specific target organ toxicity - repeated exposure
STOT - repeated exposure Based on available data the classification criteria are not met.
Aspiration hazard
Aspiration hazard Based on available data the classification criteria are not met.
12. Ecological Information
Ecotoxicity Daphnia Immobilization Study program covering the chemistry family of the saleable product
has been conducted to determine the aquatic toxicity of prepregs. Based on the study results,
the product is not required to be labelled for supply with the dead fish / dead tree symbol
(GHS09) in accordance with GHS guidelines.
Persistence and degradability
Persistence and degradabilityThere are no data on the degradability of this product.
Bioaccumulative potential
Bio-Accumulative PotentialNo data available on bioaccumulation.
6/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Partition coefficient Technically not feasible.
Mobility in soil
Mobility Not relevant, due to the form of the product.
Other adverse effects
Other adverse effects None known.
13. Disposal considerations
Waste treatment methods
General information Materials for disposal should be placed in appropriate sealed containers to avoid potential
human and environmental exposure. It is the responsibility of the generator to comply with all
federal, state, provincial and local laws and regulations. We recommend that you contact an
appropriate waste disposal contractor and environmental agency for relevant laws and
regulations. Under the U.S., Resource Conservation and Recovery Act (RCRA), it is the
responsibility of the user of the product to determine at the time of disposal, whether the
product meets relevant waste classification and to assure proper disposal.
Disposal methods It is recommended to conduct a risk assessment prior to recycling or re-using paper coverings
or any other packaging to ensure the downstream user's exposure to any potential hazard is
identified and appropriately managed. For packaging and paper coverings, which may have
come into direct contact with the product, the hazard classification and applicable regulatory
restriction associated with the chemicals identified in section 3 of the Safety Data Sheet
should be considered during the risk assessment to ensure no recycling or re-use in
downstream application/markets where the use would not be approved.
14. Transport information
General Daphnia Immobilization Study program covering the chemistry family of the saleable product
has been conducted to determine the aquatic toxicity of prepregs. Based on the study results,
the product is not required to be labelled for supply with the dead fish / dead tree symbol
(GHS09) in accordance with GHS guidelines, and is not considered as Class 9 in accordance
with Tranport of Dangerous Goods Regulations.
UN Number
This product is not dangerous to transport.
UN proper shipping name
This product is not dangerous to transport.
Transport hazard class(es)
This product is not dangerous to transport.
Packing group
This product is not dangerous to transport.
Environmental hazards
Environmentally Hazardous Substance
No.
15. Regulatory information
US Federal Regulations
7/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
RCRA RCRA Information: Currently, the product is not listed in the federal hazardous waste
regulation 40 CFR, Part 261.33, paragraphs (E) or (F), ie. chemical products that are
considered hazardous if they become waste. State or local hazardous waste regulations may
also apply if they are different from the federal regulation. It is the responsibility of the user of
the product to determine at the time of disposal, whether the product meets relevant waste
classification and to assure proper disposal.
US State Regulations
California Proposition 65 Carcinogens and Reproductive Toxins
This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic
Enforcement Act of 1986 (Proposition 65) as being known to cause cancer, birth defects or other reproductive harm.
AMORPHOUS SILICA CALCIUM-ION EXCHANGE
Inventories
US - TSCA
All components of this product are either listed or exempt from listing.
16. Other information
Abbreviations and acronyms
used in the safety data sheet
ACGIH American Conference of Industrial Hygienists
ATE Acute Toxicity Estimate
CAS# Chemical Abstracts Service Number
CERCLA Comprehensive Environmental Response, Compensation, and Liability Act
DOT Department of Transportation
EmS Emergency Response Procedures for Ships Carrying Dangerous Goods
EPA Environmental Protection Agency
GHS Global Harmonized System
HMIS Hazardous Materials Identification System
IATA International Air Transport Association
ICAO International Civil Aviation Organization
IMDG International Maritime Dangerous Goods
Kow Octanol-water partition coefficient
LC50 Lethal concentration to 50% of a test population
LD50 Lethal dose to 50% of a test population
n.o.s. Not otherwise specified
OSHA Occupational Safety and Health Administration
PNEC Predicted No Effect Concentration
PPE Personal Protection Equipment
Registered Trademark of Hexcel Corporation
RCRA Resource Conservation and Recovery Act
SADT Self-accelerating decomposition temperature
SARA Superfund Admendments and Reauthorization Act
STOT Specific Target Organ Toxicity
(STOT) RE Repeated Exposure
(STOT) SE Single Exposure
TSCA Toxic Substance Control Act
UN United Nations
VOC Volatile Organic Compound
WHMIS Workplace Hazardous Materials Information System
General information Empty containers will retain some of the product residue. When handling or disposing of
them, follow all label warnings, other instructions and waste disposal procedures.
Issued by U.S.A. Product Stewardship department
Revision date 12/5/2017
8/9
Revision date: 12/5/2017 Revision: 0
HexPly M77HF
Revision 0
Hazard statements in fullH315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H411 Toxic to aquatic life with long lasting effects.
USH01 May form combustible dust concentrations in air.
Wherever such words or phrases as "hazardous," "toxic," "carcinogen," etc. appear herein, they are used as a defined or
described under state employee right-to-know laws, Federal OSHA laws or the direct sources for these lawssuch as the
International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP), etc. The use of such words or
phrases should not be taken to mean that we deem or imply any substance or exposure to be toxic, hazardous or otherwise
harmful. Any exposure can only be understood within the entire context of its occurrence, which includes such factors as the
substance's characteristics as defined in the SDS, amount and duration of exposures, other chemicals present and
preexistingindividual differences in response to the exposure. The data provided in this SDS is based on the information
received from our raw material suppliers and other sources believed to be reliable. We are supplying you this data solely in
compliance with the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200 and the Federal and State laws as
described in Section 15: Regulatory Information. The information contained in this SDS is proprietary and confidential to
HexcelCorporation. This SDS and the information in it are not to be used for purposes other than compliance with the
Federal OSHA Hazard Communication Standard. If you have received this SDS from any other source than Hexcel
Corporation or its authorized agent, the information contained in it may have been modified from the original document and it
may not be the most current revision. Liability, if any, for use of this product is limited to the terms contained in our sale terms
and conditions. We do not in any way warrant (expressed or implied, including any implied warranty for merchantability or
fitness for a particular purpose) the data contained or the product described in this SDS. Additionally, we do not warrant that
the product will not infringe any patent or other proprietary or property rights of others.
9/9