by | Sep 27, 2025
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 5/13/2015 Revision date: 8/31/2021 Supersedes: 5/13/2015 Version: 1.2
8/31/2021 (Revision date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SA 75-90 Adhesive Film
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment – Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of soap and water.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 2/9
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 25 50 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Bisphenol A diglycidyl ether – bisphenol A copolymer CAS-No.: 25036-25-3 25 50 Skin Irrit. 2, H315 reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 1 10 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 3/9
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Precautionary measures fire
: Evacuate area.
Firefighting instructions
: Exercise caution when fighting any chemical fire.
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Methods for cleaning up
: Mechanically recover the product.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety practice.
Handling temperature
: 35 ( 0) C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 4/9
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SA 75-90 Adhesive Film No additional information available
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Bisphenol A diglycidyl ether – bisphenol A copolymer (25036-25-3) No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 5/9
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Green
Odor
: mild
Odor threshold
: No data available
pH
: Not determined
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not applicable
Non flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: Not applicable
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: No data available
Explosion limits
: Not applicable
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions. Stable at ambient temperature and under normal conditions of use.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 6/9
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat 11400 mg/kg
Skin corrosion/irritation
: Causes skin irritation.
pH: Not determined
Serious eye damage/irritation
: Not classified
pH: Not determined
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.5 mg/l LC50 - Fish [2] 2 mg/l
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 7/9 12.3. Bioaccumulative potential reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 8/9 14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed as Active, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Formaldehyde, polymer with 2-(chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
SA 75-90 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
8/31/2021 (Revision date) EN (English US) 9/9 Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 08/31/2021
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organization is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 06/23/2015 Revision date: 06/22/2018 Supersedes: 06/10/2016 Version: 1.4
06/22/2018 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :ArticleName :SA 80 Adhesive Film
1.2. Recommended use and restrictions on use
No additional information available
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Skin sensitisation, Category
1
H317 May cause an allergic skin reaction.Hazardous to the aquatic
environment Chronic
Hazard, Category 3
H412 Harmful to aquatic life with long lasting effects.
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) :Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (GHS-US) :P261 – Avoid breathing fume.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()2/7NameProduct identifierGHS-US classificationFormaldehyde, polymer with (chloromethyl)oxirane and
phenol
(CAS-No.) 9003-36-525 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Bisphenol A diglycidyl ether – bisphenol A copolymer(CAS-No.) 25036-25-325 – 50Skin Irrit. 2, H315reaction product: bisphenol-A-(epichlorhydrin); epoxy resin
(number average molecular weight 700)
(CAS-No.) 25068-38-63 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing.First-aid measures after skin contact :Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact :Rinse eyes with water as a precaution.First-aid measures after ingestion :Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Reactivity :The product is non-reactive under normal conditions of use, storage and transport. Product is
not explosive.
5.3. Special protective equipment and precautions for fire-fighters
Precautionary measures fire :Evacuate area.Firefighting instructions :Exercise caution when fighting any chemical fire.Protection during firefighting :Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Emergency procedures :Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Methods for cleaning up :Mechanically recover the product.Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()3/7
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapours. Handle in accordance with good industrial
hygiene and safety practice.
Handling temperature :<= 35 ( 0) CHygiene measures :Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Store in a well-ventilated place. Keep cool.Maximum storage period :2 yearStorage temperature :-23 - 13 CStorage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Not applicable reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Not applicable Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationDisposable glovesNitrile rubber (NBR)Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeTyvek Gown/Coveralls
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionDisposable half maskGas/vapour filterVapour protection
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()4/7
Personal protective equipment symbol(s):
Other information:Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Appearance :Flexible Sheet.Colour :Green
Odour :odourless
Odour threshold :No data available
pH :Not applicable
Melting point :No data available
Freezing point :Not applicable
Boiling point :No data available
Flash point :Not applicable
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :> 100 C estimated
Non flammable.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :Not applicable
Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :Not applicable
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :Not applicable
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2.Chemical stability
Stable under normal conditions. Stable at ambient temperature and under normal conditions of use.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4.Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5.Incompatible materials
No additional information available
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()5/7
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedFormaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation :Not classified
pH: Not applicable
Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSTOT-single exposure :Not classifiedSTOT-repeated exposure :Not classifiedAspiration hazard :Not classifiedViscosity, kinematic :No data availableSymptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :Harmful to aquatic life with long lasting effects.Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
No additional information available
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()6/7
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTNot applicable
Transportation of Dangerous GoodsTransport by sea
Not regulated
Air transport
Not regulated
SECTION 15: Regulatory information
15.1. US Federal regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the United States TSCA (Toxic Substances Control Act) inventoryreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the United States TSCA (Toxic Substances Control Act) inventoryBisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the United States TSCA (Toxic Substances Control Act) inventoryEPA TSCA Regulatory FlagY2 - Y2 - indicates an exempt polymer that is a polyester and that was exempt under the
1984 polymer exemption rule. The polyester is made only from reactants included in a
specified list of low-concern reactants that comprises one of the eligibility criteria for the 1984
exemption rule.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the EU NLP (No Longer Polymers) inventoryreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/22/2018 USA ()7/7Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on Turkish inventory of chemical
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on Turkish inventory of chemical
Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
15.3. US State regulations
ComponentState or local regulationsFormaldehyde, polymer with (chloromethyl)oxirane and
phenol(9003-36-5)
Bisphenol A diglycidyl ether - bisphenol A
copolymer(25036-25-3)
reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)(25068-
38-6)
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :06/22/2018
Full text of H-statements:H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H400Very toxic to aquatic life.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product The information contained within this document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited
without Gurit's prior written consent.
by | Sep 27, 2025
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 6/6/2022 Version: 1.0
6/6/2022 (Issue date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SE 140(BL) 30-55% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
Albacete, 02080
Spain
T +34 967 254 507 – F +34 967 254 005
Regulatory@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 2/9
P302+P352 – If on skin: Wash with plenty of soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 25 50 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-
trimethylcyclohexanemethanamine and 2-(chloromethyl)oxirane
– 10 25 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 5 10 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
bisphenol A – epoxy resins, number average MW >700 – <1100 CAS-No.: 25068-38-6 1 3 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 3/9 4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: "Exposure controls/personal protection".
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Methods for cleaning up
: Mechanically recover the product.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: "Exposure controls/personal protection".
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety procedures.
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 4/9
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SE 140(BL) 30-55% Resin Content No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Phenol, 4,4'-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine and 2-
(chloromethyl)oxirane
No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
bisphenol A - epoxy resins, number average MW >700 – <1100 (25068-38-6) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 5/9
Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Black Variable
Odor
: odorless
Odor threshold
: No data available
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Non flammable. Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: Not applicable
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: Not applicable
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 6/9
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
Serious eye damage/irritation
: Causes serious eye irritation.
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 7/9
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: '21 d' NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: '21 d'
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 8/9 DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
SE 140(BL) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
6/6/2022 (Issue date) EN (English US) 9/9
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organization is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 9/29/2015 Revision date: 4/27/2022 Supersedes: 9/29/2021 Version: 3.0
4/27/2022 (Revision date) EN (English US) 1/10
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SE 180 25-50% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 2/10
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see a doctor on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to a hazardous or special waste collection point.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Phenol, polymer with formaldehyde, glycidyl ether CAS-No.: 28064-14-4 25 50 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 3 5 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Oxiranemethanamine, N,N’-(methylenedi-4,1-phenylene)bis[N-
(oxiranylmethyl)-
CAS-No.: 28768-32-3 3 5 Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4′-(1-
methylethylidene)bis[phenol]
CAS-No.: 28906-96-9 3 5 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
bisphenol A – epoxy resins, number average MW >700 – <1100 CAS-No.: 25068-38-6 3 5 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 3/10 4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: "Exposure controls/personal protection".
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: "Exposure controls/personal protection".
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 4/10 7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SE 180 25-50% Resin Content No additional information available
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) No additional information available
Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3) No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9) No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
bisphenol A - epoxy resins, number average MW >700 – <1100 (25068-38-6) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 5/10
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Variable
Odor
: odorless
Odor threshold
: No data available
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Density
: 1.54 g/cm Cured ply denisty
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: No data available
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 6/10 10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
Serious eye damage/irritation
: Causes serious eye irritation.
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 7/10
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 – Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 – Fish [2] 2 mg/l LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’ NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology – waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 8/10 DOT IMDG IATA 14.4. Packing group Not applicable Not applicable Not applicable 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed on the Canadian DSL (Domestic Substances List)
Oxiranemethanamine, N,N’-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3) Listed on the Canadian DSL (Domestic Substances List)
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4′-(1-methylethylidene)bis[phenol] (28906-96-9) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 9/10
EU-Regulations
Oxiranemethanamine, N,N’-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3) Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Oxiranemethanamine, N,N’-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4′-(1-methylethylidene)bis[phenol] (28906-96-9) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 04/27/2022
SE 180 25-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
4/27/2022 (Revision date) EN (English US) 10/10
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 5/13/2015 Revision date: 7/21/2023 Supersedes: 2/3/2023 Version: 4.0
7/21/2023 (Revision date) EN (English US) 1/11
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SC 110(T2) 30-55% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24:+1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2
H351 Suspected of causing cancer (Inhalation)
Reproductive toxicity Category 2
H361 Suspected of damaging fertility. (Inhalation)
Specific target organ toxicity (repeated exposure) Category 2
H373 May cause damage to organs (liver, skeletal muscle) through
prolonged or repeated exposure (Inhalation)
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H351 – Suspected of causing cancer (Inhalation)
H361 – Suspected of damaging fertility. (Inhalation)
H373 – May cause damage to organs (liver, skeletal muscle) through prolonged or repeated
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 2/11
exposure (Inhalation)
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P260 – Do not breathe vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
P302+P352 – If on skin: Wash with plenty of water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
No additional information available
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 10 25 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Phenol, polymer with formaldehyde, glycidyl ether CAS-No.: 28064-14-4 10 25 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 5 10 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 3/11 Name Product identifier % GHS US classification cyanamide; carbamonitril CAS-No.: 420-04-2 1 3 Acute Tox. 3 (Oral), H301
Acute Tox. 3 (Dermal), H311
Skin Corr. 1B, H314
Eye Dam. 1, H318
Skin Sens. 1, H317
Carc. 2, H351
Repr. 2, H361
STOT RE 2, H373
Aquatic Chronic 3, H412
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general
: IF exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 4/11
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Methods for cleaning up
: Notify authorities if product enters sewers or public waters.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Obtain special instructions before use. Do not handle
until all safety precautions have been read and understood. Wear personal protective equipment.
Avoid contact with skin and eyes. Avoid breathing vapors. Handle in accordance with good
industrial hygiene and safety procedures.
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store locked up. Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SC 110(T2) 30-55% Resin Content No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
cyanamide; carbamonitril (420-04-2) USA – ACGIH – Occupational Exposure Limits Local name Cyanamide ACGIH OEL TWA 2 mg/m
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 5/11 cyanamide; carbamonitril (420-04-2) Remark (ACGIH) TLV Basis: Skin & eye irr Regulatory reference ACGIH 2023
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Variable
Odor
: odorless
Odor threshold
: No data available
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 6/11
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Density
: 1.49 g/cm Cured Ply Density
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: No data available
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 7/11 Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
cyanamide; carbamonitril (420-04-2) LD50 oral rat 142 mg/kg LD50 dermal rabbit 848 mg/kg ATE US (oral) 142 mg/kg body weight ATE US (dermal) 848 mg/kg body weight
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) pH 6.12 6.64
Serious eye damage/irritation
: Causes serious eye irritation.
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) pH 6.12 6.64
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Suspected of causing cancer (Inhalation).
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Suspected of damaging fertility. (Inhalation).
STOT-single exposure
: Not classified
STOT-repeated exposure
: May cause damage to organs (liver, skeletal muscle) through prolonged or repeated exposure
(Inhalation).
cyanamide; carbamonitril (420-04-2) STOT-repeated exposure May cause damage to organs through prolonged or repeated exposure.
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 8/11
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l EC50 72h - Algae [1] 9.4 mg/l Test organisms (species): Scenedesmus capricornutum EC50 72h - Algae [2] > 11 mg/l Test organisms (species): Scenedesmus capricornutum LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’ NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology – waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 9/11 DOT IMDG IATA 14.2. Proper Shipping Name Not regulated Not regulated Not regulated 14.3. Transport hazard class(es) Not regulated Not regulated Not regulated 14.4. Packing group Not regulated Not regulated Not regulated 14.5. Environmental hazards Not regulated Not regulated Not regulated No supplementary information available
14.6. Special precautions for user
DOT
Not regulated
IMDG
Not regulated
IATA
Not regulated
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed on the Canadian DSL (Domestic Substances List)
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 10/11
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
15.3. US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 7/21/2023
Full text of H-phrases H301 Toxic if swallowed H311 Toxic in contact with skin H314 Causes severe skin burns and eye damage
SC 110(T2) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
7/21/2023 (Revision date) EN (English US) 11/11
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H318 Causes serious eye damage H319 Causes serious eye irritation H351 Suspected of causing cancer H361 Suspected of damaging fertility or the unborn child H373 May cause damage to organs through prolonged or repeated exposure H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Indication of changes: Section Changed item Change Comments Revision date Modified No additional information available Supersedes Modified No additional information available 1 Name Modified No additional information available 8.2 Hand protection Modified No additional information available
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 09/29/2015 Revision date: 07/19/2017 Supersedes: 11/23/2016 Version: 2.0
07/19/2017 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :ArticleName :SMARTCURE Carbon 30-50% Resin Content
1.2. Recommended use and restrictions on use
No additional information available
1.3. Supplier
Gurit (USA) Inc
Rhode Island, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :+44 (0) 2392 242148
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315 Causes skin irritationSkin sensitisation, Category
1
H317 May cause an allergic skin reactionHazardous to the aquatic
environment Chronic
Hazard, Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) :
GHS07
Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS-US) :P261 – Avoid breathing vapours, fume
P264 – Wash hands, forearms and face thoroughly after handling
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()2/7NameProduct identifier%GHS-US classificationPhenol, polymer with formaldehyde, glycidyl ether(CAS-No.) 28064-14-425 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin
(number average molecular weight 700)
(CAS-No.) 25068-38-63 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Oxiranemethanamine, N,N’-(methylenedi-4,1-
phenylene)bis[N-(oxiranylmethyl)-
(CAS-No.) 28768-32-33 – 5Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4′-
(1-methylethylidene)bis[phenol]
(CAS-No.) 28906-96-93 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing.First-aid measures after skin contact :Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion :Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Reactivity :The product is non-reactive under normal conditions of use, storage and transport. Product is
not explosive.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting :Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Protective equipment :Protective clothing.Emergency procedures :Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Other information :Dispose of materials or solid residues at an authorized site.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()3/7
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapours. Handle in accordance with good industrial
hygiene and safety practice.
Handling temperature :<= 35 CHygiene measures :Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Store in a well-ventilated place. Keep cool.Maximum storage period :2 yearStorage temperature :-23 - 13 CStorage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Not applicableOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Not applicableFormaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Not applicablereaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Gloves. Protective clothing. Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationDisposable glovesNitrile rubber (NBR)Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeTyvek Gown/Coveralls
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()4/7
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter typeConditionDisposable half maskGas/vapour filterVapour protection
Other information:Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Appearance :Flexible Sheet.Colour :Black
Odour :odourless
Odour threshold :No data available
pH :No data available
Melting point :Not applicable.
Freezing point :Not applicable.
Boiling point :Not applicable.
Flash point :Not applicable.
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Not Applicable
Not flammable.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :No data available
Density :1.54 g/cm Cured ply denistySolubility :insoluble in water.
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :Not applicable.
Viscosity, dynamic :Not applicable.
Explosive limits :No data available
Explosive properties :Product is not explosive.
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2.Chemical stability
Stable under normal conditions.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()5/7
10.4.Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5.Incompatible materials
No additional information available
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400.000 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Not classifiedRespiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSpecific target organ toxicity (single exposure):Not classifiedSpecific target organ toxicity (repeated
exposure)
:Not classifiedAspiration hazard :Not classifiedSymptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology - general :Harmful to aquatic life with long lasting effects.reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()6/7
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Not applicable
Transportation of Dangerous Goods
Not applicable
Transport by sea
Not applicable
Air transport
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the United States TSCA (Toxic Substances Control Act) inventoryOxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the United States TSCA (Toxic Substances Control Act) inventoryFormaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the United States TSCA (Toxic Substances Control Act) inventoryreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the Canadian DSL (Domestic Substances List)Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the Canadian DSL (Domestic Substances List)Formaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the EEC inventory EINECS (European Inventory of Existing Commercial Chemical Substances)reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
SMARTCURE Carbon 30-50% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/19/2017 USA ()7/7Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Oxiranemethanamine, N,N'-(methylenedi-4,1-phenylene)bis[N-(oxiranylmethyl)- (28768-32-3)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Formaldehyde, polymer with (chloromethyl)oxirane and 4,4'-(1-methylethylidene)bis[phenol] (28906-96-9)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on Turkish inventory of chemical
15.3. US State regulations
No additional information available
SECTION 16: Other information
Revision date :07/19/2017Full text of H-statements:---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H411Toxic to aquatic life with long lasting effects---
---
H412Harmful to aquatic life with long lasting effects
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product
by | Sep 27, 2025
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 05/13/2015 Revision date: 08/29/2018 Supersedes: 07/08/2016 Version: 2.3
08/29/2018 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :ArticleName :SE 84LV Glass 30-56% Resin Content
1.2. Recommended use and restrictions on use
Recommended use :The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Skin sensitisation, Category
1
H317 May cause an allergic skin reaction.Hazardous to the aquatic
environment Chronic
Hazard, Category 3
H412 Harmful to aquatic life with long lasting effects.
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labelling
Hazard pictograms (GHS-US) :Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (GHS-US) :P261 – Avoid breathing vapours.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()2/7NameProduct identifierGHS-US classificationFormaldehyde, polymer with (chloromethyl)oxirane and
phenol
(CAS-No.) 9003-36-525 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Phenol, polymer with formaldehyde, glycidyl ether(CAS-No.) 28064-14-410 – 25Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin
(number average molecular weight 700)
(CAS-No.) 25068-38-65 – 10Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing.First-aid measures after skin contact :Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion :Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Reactivity :The product is non-reactive under normal conditions of use, storage and transport. Product is
not explosive.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting :Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Emergency procedures :Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()3/7
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapours. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature :<= 35 CHygiene measures :Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Store in a well-ventilated place. Keep cool.Maximum storage period :2 yearStorage temperature :-23 - 13 CStorage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Not applicable reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Not applicable Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure good ventilation of the work station.Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationDisposable glovesNitrile rubber (NBR)Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeTyvek Gown/Coveralls
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionDisposable half maskGas/vapour filterVapour protection
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()4/7
Personal protective equipment symbol(s):
Other information:Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Appearance :Flexible Sheet.Colour :white
Odour :odourless
Odour threshold :No data available
pH :Not applicable
Melting point :Not applicable.
Freezing point :Not applicable.
Boiling point :Not applicable.
Flash point :Not applicable.
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :> 100 C estimated
Not flammable.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :No data available
Solubility :insoluble in water.
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :Not applicable.
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2.Chemical stability
Stable under normal conditions.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4.Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5.Incompatible materials
No additional information available
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()5/7
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedFormaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation :Not classified
pH: Not applicable
Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classifiedReproductive toxicity :Not classifiedSTOT-single exposure :Not classifiedSTOT-repeated exposure :Not classifiedAspiration hazard :Not classifiedViscosity, kinematic :No data availableSymptoms/effects after skin contact :Irritation. May cause an allergic skin reaction.Symptoms/effects after eye contact :Eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :Harmful to aquatic life with long lasting effects.Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
No additional information available
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()6/7
SECTION 13: Disposal considerations
13.1.Disposal methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transportation of Dangerous GoodsTransport by sea
Proper Shipping Name (IMDG) :Not classified for transport
Air transport
Proper Shipping Name (IATA) :Not classified for transport
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic
Substances Control Act (TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified
in 40 CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the EU NLP (No Longer Polymers) inventoryreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
SE 84LV Glass 30-56% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/29/2018 USA ()7/7Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on Turkish inventory of chemical
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on Turkish inventory of chemical
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
ComponentState or local regulationsFormaldehyde, polymer with (chloromethyl)oxirane and
phenol(9003-36-5)
reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)(25068-
38-6)
Phenol, polymer with formaldehyde, glycidyl
ether(28064-14-4)
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/29/2018
Full text of H-statements:H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H400Very toxic to aquatic life.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product The information contained within this document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited
without Gurit's prior written consent.
by | Sep 27, 2025
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: NT-350HT Composite Prepreg
Relevant identified uses of the substance or mixture and uses advised against
General use: Composite material
For industrial purposes only.
Details of the supplier of the safety data sheet
Company name: Mitsubishi Gas Chemical America, Inc
Street/POB-No.: 655 Third Avenue 19th Floor
Postal Code, city: New York, NY 10017
USA
WWW: www.mgc-a.com
Telephone: 001 212-687-9030 x 120 (O)
Department responsible for information:
Technical Supprt
technicalsupport@mgc-a.com
Emergency phone number
Chemtrec: USA (800) 424 9300, Maritime (703) 527 3887
2. Hazards identification
Emergency overview
Appearance: Physical state at 20 C and 101.3 kPa: solid
Color: black
Odor: No data available
Classification: Sensitization – skin – Category 1;
Hazard symbols:
Signal word: Warning
Hazard statements:
May cause an allergic skin reaction.
Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapors/spray.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Dispose of contents/container to hazardous or special waste collection point.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 2 of 8
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Mixture of the substance mentioned below with non-hazardous additions
Relevant ingredients:
CAS No. Designation ConcentrationClassification
CAS 41637-38-1Bisphenol-A-
dimethacrylate
< 10 % Skin Irritation - Category 2. Eye Irritation -
Category 2A. Sensitization - skin - Category 1.
Specific Target Organ Toxicity (Single Exposure) -
Category 3.
CAS 27813-02-1Methacrylic acid,
monoester with
propane-1,2-diol
< 1 % Eye Irritation - Category 2A. Sensitization - skin -
Category 1.
4. First aid measures
In case of inhalation:If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable
for breathing. Seek medical attention if problems persist.
Following skin contact:Remove residues with soap and water. Take off contaminated clothing and wash it before
reuse. In case of skin reactions, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Remove contact lenses, if present and easy to do. Continue rinsing. In case of eye
irritation consult an ophthalmologist.
After swallowing: Rinse mouth. Never give anything by mouth to an unconscious person. Seek medical
attention.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
Not applicable
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, foam, dry chemical powder, carbon dioxide.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 3 of 8
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
May form dangerous gases and vapors in case of fire.
Furthermore, there may develop: Carbon black, acids, aldehydes, carbon monoxide and
carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained breathing apparatus and protective clothing to protect skin and eyes.
Additional information:Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Avoid generation of dust. Do not breathe dust. Provide adequate ventilation. Wear
appropriate protective equipment. Take off contaminated clothing and wash it before reuse.
Environmental precautions:
Do not release large quantities into the surface water or into drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid generation of dust. Do
not breathe dust. Do not get in eyes, on skin, or on clothing. Wear appropriate protective
equipment.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after
handling. Take off contaminated clothing and wash it before reuse.
Storage
Requirements for storerooms and containers:
Store container tightly closed in a dry and cool place.
Hints on joint storage:Keep away from food, drink and animal feedingstuffs.
Do not store together with: strong acids, strong bases, strong oxidizing agents.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 4 of 8
Engineering controls
In the case of the formation of dust: Dust should be exhausted directly at the point of origin.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection: Wear suitable protective clothing.
Protective gloves according to OSHA Standard - 29 CFR: 1910.138.
Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Respiratory protection:In case of dust formation: Particulates filter P1 according to OSHA Standard - 29 CFR:
1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product.
General hygiene considerations:
Do not breathe dust. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling. Take off contaminated clothing and wash it before
reuse.
Environmental exposure controls
Refer to 6.: Section "Environmental precautions".
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 20 C and 101.3 kPa: solid
Color: black
Odor: No data available
Odor threshold: No data available
pH: Not applicable
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: Not applicable
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Solubility: No data available
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to subsection "Possilbility of hazardous reactions".
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No hazardous reaction when handled and stored according to provisions.
Conditions to avoid:Protect from heat and direct sunlight. Avoid generation of dust.
Incompatible materials:Strong acids, strong bases, strong oxidizing agents
Hazardous decomposition products:
No hazardous decomposition products when regulations for storage and handling are
observed.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization - skin - Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
In case of inhalation:
Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat
and cough.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 6 of 8
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not release large quantities into the surface water or into drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
14.2 UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 7 of 8
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations - U.S. Federal Regulations
Carbon fibers: TSCA Inventory: listed
TSCA HPVC: not listed
NIOSH Recommendations:
Occupational Health Guideline: 0307
Bisphenol-A-dimethacrylate: TSCA Inventory: listed; EPA flags XU
TSCA HPVC: not listed
Methacrylic acid, monoester with propane-1,2-diol:TSCA Inventory: listed
TSCA HPVC: not listed
16. Other information
Text for labeling: Contains < 10 % Bisphenol-A-dimethacrylate, < 1 % Methacrylic acid, monoester with
propane-1,2-diol. Safety data sheet available on request.
Hazard rating systems:
0
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 0 (Minimal)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 0
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 0 (Minimal)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 8 of 8
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by
Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by
Road
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
STOT SE: Specific target organ toxicity - single exposure
TRGS: Technical Rules for Hazardous Substances
vPvB: Very persistent and very bioaccumulative
Date of first version:9/22/2022
Department issuing data sheet
Contact person: see section 1: Department responsible for information
The information in this data sheet has been established to our best knowledge and was up-to-date at time of
revision. It does not represent a guarantee for the properties of the product described in terms of the legal
warranty regulations.
printed by Mitsubishi with Qualisys SUMDAT
by | Sep 27, 2025
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 1 of 8
1. Product and company identification
Product identifier
Trade name: NT-350HT Composite Prepreg
Relevant identified uses of the substance or mixture and uses advised against
General use: Composite material
For industrial purposes only.
Details of the supplier of the safety data sheet
Company name: Mitsubishi Gas Chemical America, Inc
Street/POB-No.: 655 Third Avenue 19th Floor
Postal Code, city: New York, NY 10017
USA
WWW: www.mgc-a.com
Telephone: 001 212-687-9030 x 120 (O)
Department responsible for information:
Technical Supprt
technicalsupport@mgc-a.com
Emergency phone number
Chemtrec: USA (800) 424 9300, Maritime (703) 527 3887
2. Hazards identification
Emergency overview
Appearance: Physical state at 20 C and 101.3 kPa: solid
Color: black
Odor: No data available
Classification: Sensitization – skin – Category 1;
Hazard symbols:
Signal word: Warning
Hazard statements:
May cause an allergic skin reaction.
Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapors/spray.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Dispose of contents/container to hazardous or special waste collection point.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 2 of 8
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200).
Hazards not otherwise classified
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:Mixture of the substance mentioned below with non-hazardous additions
Relevant ingredients:
CAS No. Designation ConcentrationClassification
CAS 41637-38-1Bisphenol-A-
dimethacrylate
< 10 % Skin Irritation - Category 2. Eye Irritation -
Category 2A. Sensitization - skin - Category 1.
Specific Target Organ Toxicity (Single Exposure) -
Category 3.
CAS 27813-02-1Methacrylic acid,
monoester with
propane-1,2-diol
< 1 % Eye Irritation - Category 2A. Sensitization - skin -
Category 1.
4. First aid measures
In case of inhalation:If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable
for breathing. Seek medical attention if problems persist.
Following skin contact:Remove residues with soap and water. Take off contaminated clothing and wash it before
reuse. In case of skin reactions, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids
apart. Remove contact lenses, if present and easy to do. Continue rinsing. In case of eye
irritation consult an ophthalmologist.
After swallowing: Rinse mouth. Never give anything by mouth to an unconscious person. Seek medical
attention.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
Not applicable
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, foam, dry chemical powder, carbon dioxide.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 3 of 8
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
May form dangerous gases and vapors in case of fire.
Furthermore, there may develop: Carbon black, acids, aldehydes, carbon monoxide and
carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained breathing apparatus and protective clothing to protect skin and eyes.
Additional information:Do not allow fire water to penetrate into surface or ground water.
6. Accidental release measures
Personal precautions:Avoid generation of dust. Do not breathe dust. Provide adequate ventilation. Wear
appropriate protective equipment. Take off contaminated clothing and wash it before reuse.
Environmental precautions:
Do not release large quantities into the surface water or into drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid generation of dust. Do
not breathe dust. Do not get in eyes, on skin, or on clothing. Wear appropriate protective
equipment.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after
handling. Take off contaminated clothing and wash it before reuse.
Storage
Requirements for storerooms and containers:
Store container tightly closed in a dry and cool place.
Hints on joint storage:Keep away from food, drink and animal feedingstuffs.
Do not store together with: strong acids, strong bases, strong oxidizing agents.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, inhalable fraction)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 4 of 8
Engineering controls
In the case of the formation of dust: Dust should be exhausted directly at the point of origin.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI
Z87.1-2010.
Skin protection: Wear suitable protective clothing.
Protective gloves according to OSHA Standard - 29 CFR: 1910.138.
Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Respiratory protection:In case of dust formation: Particulates filter P1 according to OSHA Standard - 29 CFR:
1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product.
General hygiene considerations:
Do not breathe dust. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling. Take off contaminated clothing and wash it before
reuse.
Environmental exposure controls
Refer to 6.: Section "Environmental precautions".
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 20 C and 101.3 kPa: solid
Color: black
Odor: No data available
Odor threshold: No data available
pH: Not applicable
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: Not applicable
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Solubility: No data available
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 5 of 8
10. Stability and reactivity
Reactivity: Refer to subsection "Possilbility of hazardous reactions".
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
No hazardous reaction when handled and stored according to provisions.
Conditions to avoid:Protect from heat and direct sunlight. Avoid generation of dust.
Incompatible materials:Strong acids, strong bases, strong oxidizing agents
Hazardous decomposition products:
No hazardous decomposition products when regulations for storage and handling are
observed.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization - skin - Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
In case of inhalation:
Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat
and cough.
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 6 of 8
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not release large quantities into the surface water or into drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be
recycled.
14. Transport information
14.2 UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 7 of 8
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations - U.S. Federal Regulations
Carbon fibers: TSCA Inventory: listed
TSCA HPVC: not listed
NIOSH Recommendations:
Occupational Health Guideline: 0307
Bisphenol-A-dimethacrylate: TSCA Inventory: listed; EPA flags XU
TSCA HPVC: not listed
Methacrylic acid, monoester with propane-1,2-diol:TSCA Inventory: listed
TSCA HPVC: not listed
16. Other information
Text for labeling: Contains < 10 % Bisphenol-A-dimethacrylate, < 1 % Methacrylic acid, monoester with
propane-1,2-diol. Safety data sheet available on request.
Hazard rating systems:
0
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 0 (Minimal)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 0
PHYSICAL HAZARD 0
X
HMIS Version III Rating:
Health: 1 (Slight)
Flammability: 0 (Minimal)
Physical Hazard: 0 (Minimal)
Personal Protection: X = Consult your supervisor
printed by Mitsubishi with Qualisys SUMDAT
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT Composite Prepreg
Material number NT-350HT
Revision date:9/22/2022 Date of print:10/6/2022
Version: 1.0 Language: en-US Page: 8 of 8
Abbreviations and acronyms:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by
Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by
Road
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying
Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution
from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
REACH: Registration, Evaluation, Authorisation and Restriction of Chemicals
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
STOT SE: Specific target organ toxicity - single exposure
TRGS: Technical Rules for Hazardous Substances
vPvB: Very persistent and very bioaccumulative
Date of first version:9/22/2022
Department issuing data sheet
Contact person: see section 1: Department responsible for information
The information in this data sheet has been established to our best knowledge and was up-to-date at time of
revision. It does not represent a guarantee for the properties of the product described in terms of the legal
warranty regulations.
printed by Mitsubishi with Qualisys SUMDAT
by | Sep 27, 2025
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: .0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 1 of 7
1. Product and company identification
Product identifier
Trade name: NT-350HT ) 5 Composite Prepreg
Relevant identified uses of the substance or mixture and uses advised against
General use: Composite material
For industrial purposes only.
Details of the supplier of the safety data sheet
Company name: Mitsubishi Gas Chemical America, Inc
Street/POB-No.: 655 Third Avenue 19th Floor
Postal Code, city: New York, NY 10017
USA
WWW: www.mgc-a.com
Telephone: 001 212-687-9030 x 120 (O)
Department responsible for information:
Technical Supprt
technicalsupport@mgc-a.com
Emergency phone number
Chemtrec: USA (800) 424 9300, Maritime (703) 527 3887
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 F and 101.3 kPa: solid Color: black
Odor: No data available
Classification: Sensitization – skin – Category 1.
Hazard symbols:
Signal word: Warning
Hazard statements:
May cause an allergic skin reaction.
Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapors/spray. Contaminated work clothing should not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water/soap. Specific treatment (see ‘ First aid ‘ on this label). If skin irritation or rash occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200).
Hazards not otherwise classified
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
see section 11: Toxicological information
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: 1.0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 2 of 7
3. Composition / Information on ingredients
Chemical characterization:Mixture of the substance mentioned below with non-hazardous additions
Relevant ingredients:
CAS No. Designation Concentratio
n
Classification
CAS 41637-38-1 Bisphenol-A-
dimethacrylate
< 10 % Skin Irritation - Category 2. Eye Irritation -
Category 2A. Sensitization - skin - Category 1.
Specific Target Organ Toxicity (Single
Exposure) - Category 3.
CAS 27813-02-1 Methacrylic acid,
monoester with
propane-1,2-diol
< 1 % Eye Irritation - Category 2A.
Sensitization - skin - Category 1.
4. First aid measures
In case of inhalation:If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek medical attention if problems persist.
Following skin contact:Remove residues with soap and water. Take off contaminated clothing and wash it before reuse. In case of skin reactions, consult a physician.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. In case of eye irritation consult an ophthalmologist.
After swallowing: Rinse mouth. Never give anything by mouth to an unconscious person. Seek medical attention.
Most important symptoms/effects, acute and delayed
May cause an allergic skin reaction.
Information to physician
Treat symptomatically.
5. Fire fighting measures
Flash point/flash point range:
Not applicable
Auto-ignition temperature:No data available
Suitable extinguishing media:
Water spray jet, foam, dry chemical powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons:
Full water jet
Specific hazards arising from the chemical
May form dangerous gases and vapors in case of fire. Furthermore, there may develop: Carbon black, acids, aldehydes, carbon monoxide and carbon dioxide.
Protective equipment and precautions for firefighters:
Wear self-contained breathing apparatus and protective clothing to protect skin and eyes.
Additional information:Do not allow fire water to penetrate into surface or ground water.
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: 1.0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 3 of 7
6. Accidental release measures
Personal precautions:Avoid generation of dust. Do not breathe dust. Provide adequate ventilation. Wear
appropriate protective equipment. Take off contaminated clothing and wash it before
reuse.
Environmental precautions:
Do not release large quantities into the surface water or into drains.
Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal.
7. Handling and storage
Handling
Advices on safe handling:Provide adequate ventilation, and local exhaust as needed. Avoid generation of dust. Do not breathe dust. Do not get in eyes, on skin, or on clothing. Wear appropriate protective equipment. Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Take off contaminated clothing and wash it before reuse.
Storage
Requirements for storerooms and containers:
Store container tightly closed in a dry and cool place.
Hints on joint storage:Keep away from food, drink and animal feedingstuffs. Do not store together with: strong acids, strong bases, strong oxidizing agents.
8. Exposure controls / personal protection
Exposure guidelines
Occupational exposure limit values:
Type Limit value
USA: ACGIH: TWA 10 mg/m (Dust limit value, inhalable fraction)
USA: ACGIH: TWA 3 mg/m (Dust limit value, respirable fraction)
USA: OSHA: TWA 15 mg/m (Dust limit value, total dust)
USA: OSHA: TWA 5 mg/m (Dust limit value, respirable fraction)
Engineering controls
In the case of the formation of dust: Dust should be exhausted directly at the point of origin.
See also information in chapter 7, section storage.
Personal protection equipment (PPE)
Eye/face protection:Tightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010.
Skin protection: Wear suitable protective clothing.
Protective gloves according to OSHA Standard - 29 CFR: 1910.138.
Observe glove manufacturer's instructions concerning penetrability and breakthrough
time.
Respiratory protection:In case of dust formation: Particulates filter P1 according to OSHA Standard - 29 CFR:
1910.134 or ANSI Z88.2.
The filter class must be suitable for the maximum contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when handling the product.
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: 1.0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 4 of 7
General hygiene considerations:
Do not breathe dust. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling. Take off contaminated clothing and wash it
before reuse.
Environmental exposure controls
Refer to 6.: Section "Environmental precautions".
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 68 F and 101.3 kPa: solid Color: black
Odor: No data available
Odor threshold: No data available
pH: Not applicable
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: Not applicable
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Solubility: No data available
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: Refer to subsection "Possibility of hazardous reactions".
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions:
No hazardous reaction when handled and stored according to provisions.
Conditions to avoid:Protect from heat and direct sunlight. Avoid generation of dust.
Incompatible materials:Strong acids, strong bases, strong oxidizing agents
Hazardous decomposition products:
No hazardous decomposition products when regulations for storage and handling are observed.
Thermal decomposition:No data available
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: 1.0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 5 of 7
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No
toxicological data is available for the product as such.
Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization - skin -
Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
In the case of the formation of dust: Can cause skin, eye and respiratory tract irritation.
In case of inhalation:
Inhalation of dust may cause shortness of breath, tightness of the chest, a sore throat
and cough.
12. Ecological information
Ecotoxicity
Further details: No data available
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not release large quantities into the surface water or into drains.
13. Disposal considerations
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Non-contaminated packages may be recycled.
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT ) 5 Composite Prepreg
Material number NT-350HT ) 5
Revision date: 6/2/2025
Version: 1.0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 6 of 7
14. Transport information
UN number
ADR/RID, IMDG, IATA-DGR:
not applicable
UN proper shipping name
ADR/RID, IMDG, IATA-DGR:
Not restricted
Transport hazard class(es)
ADR/RID, IMDG, IATA-DGR:
not applicable
Packing group
ADR/RID, IMDG, IATA-DGR:
not applicable
Environmental hazards
Marine pollutant: no
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
No data available
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name:: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name:: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations - U.S. Federal Regulations
Carbon fibers: TSCA Inventory: listed
NIOSH Recommendations:
Occupational Health Guideline: 0307
Bisphenol-A-dimethacrylate: TSCA Inventory: listed; EPA flags XU
Methacrylic acid, monoester with propane-1,2-diol: TSCA Inventory: listed
National regulations - U.S. State Regulations
No data available
16. Other information
Text for labeling: Contains < 10 % Bisphenol-A-dimethacrylate, < 1 % Methacrylic acid, monoester with
propane-1,2-diol.
printed by Mitsubishi
SAFETY DATA SHEET
according to 29 CFR 1910.1200 and ANSI standard Z400.1-2010
NT-350HT/FR Composite Prepreg
Material number NT-350HT/FR
Revision date: 6/2/2025
Version: 1 .0
Replaces version: 1.0
Language: en-US
Date of print: 6/2/2025
Page: 7 of 7
Hazard rating systems:
0
10
NFPA Hazard Rating:
Health: 1 (Slight)
Fire: 0 (Minimal)
Reactivity: 0 (Minimal)
HEALTH 1
FLAMMABILITY 0
PHYSICAL HAZARD 0
X
HMIS Version III Rating: Health: 1 (Slight) Flammability: 0 (Minimal) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor
Abbreviations and acronyms:
Reason of change:
Date of first version:
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
EQ: Excepted quantities
Eye Irritation: Eye irritation
IATA: International Air Transport Association
IATA-DGR: International Air Transport Association Dangerous Goods Regulations
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
Sensitization - skin: Skin sensitisation
Skin Irritation: Skin irritation
STOT SE: Specific target organ toxicity - single exposure
TRGS: Technical Rules for Hazardous Substances
vPvB: Very persistent and very bioaccumulative
General revision
6/3/2025
Department issuing data sheet
Contact person: see section 1: Department responsible for information
The information in this data sheet has been established to our best knowledge and was up-to-date at time of revision. It does not represent a guarantee
for the properties of the product described in terms of the legal warranty regulations.
printed by Mitsubishi
