by | Sep 27, 2025
page 1/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
0. INTRODUCTION
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Identification of the substance
Generic product name
Product name :
Purpose of use
Identication of the manufacturer
:
2. HAZARDS IDENTIFICATION
Classification
Main hazards / harmful effects
page 2/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
3. COMPOSITION AND INFORMATION ON COMPONENTS
Hazardous components or hazardous complex substances
Other substances that are not considered to be dangerous to health and environment.
CAS number Name of the ingredient
Percent by
Wt.
4. FIRST AID MEASURES
Contact with eyes:
Inhalation :
Skin contact :
Ingestion :
5. FIRE – FIGHTING MEASURES
Suitable extinguishing media :
Dangerous combustible products and related risks:
Special protective equipment for fire fighters:
Safety Instructions of Use – Safety Data Sheet
Generic product name
page 3/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
Product name :
Date:
.
Physical and Chemical data on flammability and explosiveness:
Specific risks relating to fire fighting measures:
Personal precautions
Environmental precautions
Precautions when handling dispersed substances:
7. HANDLING AND STORAGE
Handling
Technical measures:
Handling precautions:
Advise for use and incompatibility with other materials:
Storage:
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
6. ACCIDENTAL RELEAS E MEASURES
page 4/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
Exposure limits:
Individual protection:
Respiratory protection:
Hand protection:
Eye protection:
.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical properties:
Specific temperature at which physical state changes:
Solubility: (solubility and solvents)
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
10. STABILITY AND REACTIVITY
Stability:
page 5/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
Conditions to avoid:
Materials to avoid:
Dangerous decomposition products:
11. TOXICOLOGICAL INFORMATION
Exposure risks:
Ingestion:
Inhalation:
Skin contact:
Contact with eyes:
12. ECOLOGICAL INFORMATION
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
13. DISPOSAL CONSIDERATIONS
Product disposal according to the regulation on waste in force:
Disposal of polluted packages according to the regulation on waste in force:
page 6/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
, ,
14. TRANSPORT INFORMATIO N
15. REGULATORY INFORMATION
Information on EU labelling
16. OTHER INFORMATION
Information which has been added, deleted or revised
Type of revision:
Safety Instructions of Use – Safety Data Sheet
Generic product name
Product name :
Date:
.
Based on directive/regulation:
page 7/7
SELCOM SRL
via della Torre n. 17
31010 FREGONA (TV) ITALY
phone +39 0438 585166
modem fax +39 0438 585172
manual fax +39 0438 916049
cap. soc. EURO 101490,00
cod. fisc. e p.i. IT 02369430265
trib. Treviso n. 33642 reg. soc.
c.c.i.a.a. Treviso n. 206094
M. estero TV 028944
unidirectional & stitched multiaxial fabrics in
glass, carbon, aramid… and hybrids for
the composite industry
E-mail: info@selcom-srl.com
internet: www.selcom-srl.com
by | Sep 27, 2025
General Datasheet
PDS-SE70-15-0618 1
SE 70
LOW TEMPERATURE CURE HIGH TOUGHNESS
EPOXY PREPREG SYSTEM
Low temperature 70 C (158 F) curing
Faster cycle times at elevated temperature
Excellent balance of mechanical properties and toughness
Long out-life up to 4 weeks @ 18-22 C (64-72 F)
Range of compatible adhesive films and ancillary products
Excellent surface finish
Good Tg
Suitable for vacuum bag, press or autoclave consolidation
INTRODUCTION
SE70 is part of the range of prepreg products. This unique product range provides technically and commercially
competitive engineering materials, ideal for use either solely, or in conjunction with other products from within the
product range along with other Gurit products.
SE70 is a hot melt epoxy prepreg ideally suited to the manufacture of thick
sections. It can be cured at temperatures as low as 70 C (158 F), but can
also be used for the rapid manufacture of components through its 25-minute
cure at 120 C (248 F). All of this can be achieved together with out-life of 28
days at 21 C (70 F).
SE70 is designed for vacuum bag pressing and offers excellent mechanical
performance on glass fibre reinforcements. Currently SE70 is manufactured
into a prepreg structure with E-glass and Carbon fibres, which are
manufactured into biax or woven materials. This data sheet is concerned with
carbon reinforcements.
PDS-SE70-15-0618 2
PROCESSING NOTES – GENERAL
PROCESSING NOTES
PREPARATION
When preparing the lay-up the prepreg should be removed from the
freezer and allowed to thaw in a sealed bag. This may take 6 to 24
hours depending on roll size. This prevents atmospheric moisture
from condensing on the prepreg which may cause voiding on cure.
The mould surface should be release coated and must have been
tested for vacuum integrity prior to lay-up.
LAYING-UP
The following procedure is recommended for preparing vacuum
cured laminates.
1. The moulding surface must first be treated with a suitable release
agent. A separate prepreg nylon peel ply is available for covering
the mould tool prior to layup in order to leave a clean, textured
surface for subsequent bonding. The required number of plies of SE
70 prepreg are placed on the tool and a thermocouple inserted into
the layup near the centre ply of the thickest edge section. Typically
several vacuum debulks are required during the layup to ensure the
removal of entrapped air. The frequency and temperature of
debulks can vary depending on the type and size of application. The
user should carry out test panels to determine the optimum
schedule. Further advice can be obtained from Technical Services.
2. Apply a peel ply to the surface of the layup. Note that for good
secondary bonding of a peelplied surface of an SE 70 prepreg
laminate, a nylon peel ply, such as Tygavac stitch Ply A is strongly
recommended. Cover the peel ply entirely with a perforated release
film. Normally, no edge resin bleeder system is used. P98 grade
release film is recommended. With the perforated release film, the
amount of resin bled away is controlled by the number of dry plies of
resin bleeder cloth placed over the perforated release film. For thin
skins care must be taken not to overbleed the laminate (prepreg
peel ply and low bleed RP2 release film will ensure this does not
occur).
3. Install a vacuum bag by standard techniques. Insert at least two
vacuum stems through the bag connecting one to the vacuum
source and the other, at a point on the part furthest from the source,
to a calibrated vacuum gauge. Position part in the oven or autoclave
and draw vacuum to check for bag or system leaks.
4. Commence the heatup cycle, typically between 0.3 C(0.5 F)/min
and 2 C(3.6 F)/min to the final cure temperature. At 70 C (158 F)
the temperature should be held for 16 hours. Faster cures may be
obtained at elevated temperatures, e.g. 100 mins @ 100 C (212 F),
or 25 minutes @ 120 C (248 F). All temperatures should be
measured by the previously installed thermocouple. When curing at
70 C (158 F), a minimum of 16 hours is recommended. Vacuum
should be maintained as high as possible, with a minimum of 85%
throughout the cure cycle.
5. Upon completion of cure, the heat is turned off and the part
cooled until its temperature has fallen below 60 C (140 F). When
fully cooled, the part may be debagged, trimmed and machined as
necessary. A post-cure is not required.
Gloves should be worn both to avoid skin contact with the prepreg,
and to avoid transfer of sweat onto the prepreg, which may cause
voiding on cure.
THIN LAMINATES
When using very thin laminates (eg with a total laminate fibre
weight of less than 300g/m
2
), care needs to be taken to avoid
extracting excessive amounts of resin during the cure
process. To avoid this, a microporous release film can be
used, and for particularly critical components, a pre-
impregnated peel ply should be used before the application
of a RP2 perforated release film and breather / bleeder
fabric.
THICK LAMINATES
When processing thick laminates, extra care should be taken
to avoid entrapping air in the laminate by the use of regular
vacuum debulks.
An intermediate dwell can be included during the cure to
burn off any excess exothermic energy in a controlled
manner. Contact Technical Services for further details.
CURING ON A RELEASE COATED MOULD
Several thermocouples should be positioned at various parts
of the layup; a minimum of 12 is recommended but this may
vary depending on the size of the moulded structure.
On a well sealed mould tool it should be possible to achieve –
0.85 bar. If the achievable vacuum is below this level do not
proceed with cure until the bag leaks have been plugged.
The vacuum should be held at ambient temperature for one
hour prior to heating. The vacuum should be maintained
throughout the cure. Acceptable ramp rates vary from 0.3–
2.0 C (0.5-3.6 F) per minute, with 0.3-0.5 C/min (0.5-
3.6 F/min) being typical on large structures.
When curing large structures a dwell period can be included
to allow temperature equilibration of the tool and laminate.
See separate Processing Notes for further information.
For a good balance of composite properties, it is
recommended that the laminate is cured at 70 C (158 F) for
a minimum of 16 hours. A laminate may be cured in two
stages if, for example, making a cored component. However
in a two stage cure, a minimum of 8 hours at 70 C (158 F) or
4 hours at 80 C (176 F) is recommended before debagging
a skin, and it must be ensured that this skin is cured for the
equivalent of at least 16 hours at 70 C (158 F) or 8 hours at
80 C (176 F) before going into service.
CURING AT 70 C ( F)
When curing at 70 C (158 F) it is important to ensure the
temperature is monitored off the trailing thermocouple as
70 C (158 F) should be treated as the minimum cure
temperature for SE 70.
CURING AT HIGHER TEMPERATURES
SE 70 may be cured at higher temperatures for a shorter
time. At a cure temperature of 100 C (212 F) cure can be
achieved in 100 minutes, or at 120 C (250 F) cure can be
achieved in 25 minutes.
It is not recommended to cure SE 70 under vacuum
pressures of less than 0.85 bar. If a ramp rate of less than
0.3 C(0.5 F)/min is used, users should satisfy themselves
that this allows adequate flow.
PDS-SE70-15-0618 3
PRODUCT INFORMATION
AVAILABILITY
SE70 prepregs are available in a variety of fabric forms, normally
supplied on a single polythene film. Please contact Technical
Services to discuss specific requirements and availability.
PROPERTY UNIT
200GSM HEC UD
CARBON
Tack rating *Medium
Nominal Resin Content (by weight) % 37
Nominal Fibre Weight g/m
2
200
Nominal Areal Weight g/m
2
317
Nominal Roll Width mm 400
Nominal Roll Length Lm 20
Backer –
1 x paper / 1 x MDPE
poly
*allows repositioning of plies at recommended handling temperature
PREPREG PROPERTIES
RHEOLOGY DATA
SE70 resin viscosity profile conducted at 1 C (1.8 F) per minute.
TRANSPORT & STORAGE
When stored sealed & out of direct sunlight.
PROPERTY VALUE
Minimum Viscosity 37.6 Pa.s 376 P
Temperature at Minimum Viscosity 69 C 156 F
STORAGE TEMP UNIT VALUE
-18 C 0 F months 24
+18-22 C +64-72 F weeks 4
All prepreg materials should be stored in a freezer when not
in use to maximise their useable life, since the low
temperature reduces the reaction of resin and catalyst to
virtually zero. However, even at -18 C (0 F), the temperature
of most freezers, some reaction will still occur. In most cases
after some years, the material will become unworkable.
When not in use SE 70 products should be maintained at –
18 C (0 F). To avoid contamination on their surfaces, allow
rolls to reach room temperature before unwrapping.
HEALTH AND SAFETY
Please refer to product SDS for up to date information
specific to this product.
MINIMUM CURE TIME & TEMPERATURE
Recommended minimum cure is 16 hours at 70 C (158 F) using vacuum bag processing.
PROPERTY OVEN / VAC BAG TEST STANDARD
Typical Laminate 8 plies of 200g/m
2
HEC UD carbon 37% resin content –
Typical Ramp Rate 1 2 C (2 4 F) per minute –
Cure Temperature 70 C (158 F) 80 C (176 F) 95 C (203 F) 110 C (230 F) 120 C (248 F) –
Cure Dwell Time 16 hours 8 hours 4 hours 50 minutes 25 minutes –
Cure Pressure -1bar (14.5Psi) –
De-mould Temperature < 60 C / 140 F -
Dry Tg1 (DMA) 89 C / 192 F 101 C / 214 F 110 C / 230 F 126 C / 259 F TBD ISO 6721 (DMA)
*suitable for use in conjunction with hot-in / hot-out rapid component manufacture is possible using appropriate press tooling
10
100
1000
10000
30 50 70 90
COMPLEX VISCOSITY (P)
TEMPERATURE ( C)
PDS-SE70-15-0618 4
LAMINATE PROPERTIES
Where possible properties presented are averages of multiple batch data from a variety of fibre suppliers. Customers with specific
requirements should contact Gurit technical support who can recommend appropriate fibres and formats.
CURED RESIN PROPERTIES
Oven cured using standard processing techniques and a minimum cure time of 16 hours at 70 C (158 F).
PROPERTY SYMBOL SE 70 RESIN CAST TEST STANDARD
Tensile Strength T 54 MPa 7.83 ksi ISO 527-2
Tensile Modulus ET 3.61 GPa 0.52 Msi ISO 527-2
Flexural Strength F 80 MPa 11.6 Ksi ISO 178
Flexural Modulus EF 3.45 GPa 0.50 Msi ISO 178
Compressive Strength C 142 MPa 20.6 Ksi ISO 604
Compressive Modulus EC 3.81 GPa 0.55 Msi ISO 604
UNIDIRECTIONAL LAMINATE PROPERTIES
Cured using standard processing techniques and a minimum cure time of 16 hours at 70 C (158 F).
PROPERTY SYMBOL UNIT HEC FIBRE* IMC FIBRE* HMC FIBRE* TEST STANDARD
Typical Fibre Density fibre g/cm
3
1.8 1.79 1.82 -
Fibre Modulus Efibre GPa 227 - 257 275 - 310 365 - 405 -
Resin Content % % 32 - 35 35 - 37 33 ASTM D 3171 Method II
Fibre Volume Fraction t % 54.2 52.0 56.1 ASTM D 3171 Method II
0 Tensile Strength** XT MPa 2510 2896 1916 ISO 527-5
0 Tensile Modulus** Et GPa 133 171 211 ISO 527-5
0 Compressive Strength** XC MPa 1174 1295 1191 SACMA SRM1-94
0 Compressive Modulus** EC11 GPa 119 151 195 SACMA SRM1-94
90 Tensile Strength YT MPa 48 42 30 ISO 527-5
90 Tensile Modulus ET22 GPa 7.7 7.1 7.0 ISO 527-5
0 Flexural Strength XF MPa 1295 - - ISO 14125
0 Flexural Modulus EF11 GPa 100 - - ISO 14125
0 ILSS XILSS MPa 78 78 52 ISO 14130
*HEC = High Elongation Carbon, IMC = Intermediate Modulus Carbon, HMC = High Modulus Carbon, UHMC = Ultra-High Modulus Carbon
**Normalised to 60% fibre volume fraction
MULTIAXIAL LAMINATE PROPERTIES
Oven cured using standard processing techniques and a minimum cure time of 16 hours at 70 C (158 ).
PROPERTY SYMBOL UNIT XC411 TEST STANDARD
Resin Content
-
% 42 ASTM D 3171 Method II
Cured Ply Thickness
-
mm 0.46 ASTM D792
Fibre Volume Fraction
-
% 49.2 ASTM D 3171 Method II
45 Tensile Strength* XT
MPa 1414 ISO 527-4
45 Tensile Modulus* Et GPa 66 ISO 527-4
45 Compressive Strength* XC MPa 655 SACMA SRM1-94
45 Compressive Modulus* Ec GPa 59 SACMA SRM1-94
45 Flexural Strength XF MPa 911 ISO 14125
45 Flexural Modulus EF11 GPa 51 ISO 14125
ILSS M MPa 44 ISO 14130
*Normalised to 55% fibre volume fraction
PDS-SE70-15-0618 5
NOTICE
All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the
Company) only warrants that advice in writing is given with reasonable skill and care. No further
duty or responsibility is accepted by the Company. All advice is given subject to the terms and
conditions of sale (the Conditions) which are available on request from the Company or may be
viewed at Gurit s Website: www.gurit.com/terms-and-conditions.aspx
The Company strongly recommends that Customers make test panel s in the final process
conditions and conduct appropriate testing of any goods or materials supplied by the Company prior
to final use to ensure that they are suitable for the Customer s planned application. Such testing
should include testing under conditions as close as possible to those to which the final component
may be subjected. The Company specifically excludes any warranty of fitness for purpose of the
goods other than as set out in writing by the Company. Due to the varied nature of end-use
applications, the Company does, in particular, not warrant that the test panels in the final process
conditions and/or the final component pass any fire standards.
The Company reserves the right to change specifications and prices without notice and Customers
should satisfy themselves that information relied on by the Customer is that which is currently
published by the Company on its website. Any queries may be addressed to the Technical Services
Department.
Gurit is continuously reviewing and updating literature. Please ensure that you have the current
version by contacting your sales contact and quoting the revision number in the bottom left-hand
corner of this page.
TECHNICAL CONTACT INFORMATION
For all other enquiries such as technical queries:
Telephone + 44 1983 828000 (08:30 17:00 GMT)
Email technical.support@gurit.com
24-HOUR CHEMICAL EMERGENCY NUMBER
For advice on chemical emergencies, spillages, fires or exposures:
Europe +44 1273 289451
Americas +1 646 844 7309
APAC +65 3158 1412
All trademarks used or mentioned in this document are protected by law.
E customer.support@gurit.com
W www.gurit.com
by | Sep 27, 2025
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 10/16/2015 Revision date: 3/29/2022 Supersedes: 9/30/2019 Version: 1.6
3/29/2022 (Revision date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SE 75 (T1) 30-55% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
Albacete, 02080
Spain
T +34 967 254 507 – F +34 967 254 005
Regulatory@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 2/9
P302+P352 – If on skin: Wash with plenty of water, soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see doctor on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-
trimethylcyclohexanemethanamine and 2-(chloromethyl)oxirane
– 10 25 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 10 25 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 5 10 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 3/9 4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 4/9 7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SE 75 (T1) 30-55% Resin Content No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine and 2-
(chloromethyl)oxirane
No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 5/9
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Variable
Odor
: odorless
Odor threshold
: No data available
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: No data available
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 6/9 10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
Serious eye damage/irritation
: Causes serious eye irritation.
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 7/9 Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: '21 d' NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: '21 d'
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 8/9 DOT IMDG IATA 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 9/9
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 03/29/2022
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organization is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
by | Sep 27, 2025
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 10/16/2015 Revision date: 3/29/2022 Supersedes: 9/30/2019 Version: 1.6
3/29/2022 (Revision date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SE 75 (T1) 30-55% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
Albacete, 02080
Spain
T +34 967 254 507 – F +34 967 254 005
Regulatory@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 2/9
P302+P352 – If on skin: Wash with plenty of water, soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see doctor on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-
trimethylcyclohexanemethanamine and 2-(chloromethyl)oxirane
– 10 25 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 10 25 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 5 10 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 3/9 4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 4/9 7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SE 75 (T1) 30-55% Resin Content No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine and 2-
(chloromethyl)oxirane
No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 5/9
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Variable
Odor
: odorless
Odor threshold
: No data available
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: No data available
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 6/9 10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) pH 6.12 6.64
Serious eye damage/irritation
: Causes serious eye irritation.
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) pH 6.12 6.64
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 7/9
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l EC50 72h - Algae [1] 9.4 mg/l Test organisms (species): Scenedesmus capricornutum EC50 72h - Algae [2] > 11 mg/l Test organisms (species): Scenedesmus capricornutum LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’ NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: ’21 d’
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology – waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 8/9 DOT IMDG IATA 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 9/9
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 03/29/2022
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient’s organization is prohibited without Gurit’s prior written consent.
by | Sep 27, 2025
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 10/16/2015 Revision date: 3/29/2022 Supersedes: 9/30/2019 Version: 1.6
3/29/2022 (Revision date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SE 75 (T1) 30-55% Resin Content
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
Albacete, 02080
Spain
T +34 967 254 507 – F +34 967 254 005
Regulatory@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Serious eye damage/eye irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 2/9
P302+P352 – If on skin: Wash with plenty of water, soap and water.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P321 – Specific treatment (see doctor on this label).
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-
trimethylcyclohexanemethanamine and 2-(chloromethyl)oxirane
– 10 25 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 10 25 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 5 10 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 3/9 4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
Emergency procedures
: Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety procedures.
Handling temperature
: 35 C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 4/9 7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SE 75 (T1) 30-55% Resin Content No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Phenol, 4,4′-(1-methylethylidene)bis-, polymer with 5-amino-1,3,3-trimethylcyclohexanemethanamine and 2-
(chloromethyl)oxirane
No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 5/9
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Variable
Odor
: odorless
Odor threshold
: No data available
pH
: No data available
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: Not flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: No data available
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: Not applicable
Explosion limits
: No data available
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 6/9 10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
Serious eye damage/irritation
: Causes serious eye irritation.
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact
: Eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 7/9 Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: '21 d' NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: '21 d'
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 8/9 DOT IMDG IATA 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
SE 75 (T1) 30-55% Resin Content
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
3/29/2022 (Revision date) EN (English US) 9/9
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 03/29/2022
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organization is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
by | Sep 27, 2025
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 06/23/2015 Revision date: 06/10/2016 Supersedes: 06/10/2016 Version: 1.3
06/10/2016 USA ()Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureName :SA 80 Adhesive Film
1.2. Relevant identified uses of the substance or mixture and uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
Gurit (USA) Inc
RHODE ISLAND, 2809 – USA
T 18198689182 – F 001 819 847 2572
marine-na@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number :+44 (0) 2392 242148
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Skin corrosion/irritation,
Category 2
H315Sensitisation Skin,
Category 1
H317Hazardous to the
aquatic environment
Chronic Hazard,
Category 3
H412
Full text of H statements : see section 16
2.2. Label elements
GHS-US labelling
Hazard pictograms (GHS-US) :
GHS07
Signal word (GHS-US) :WarningHazard statements (GHS-US) :H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS-US) :P261 – Avoid breathing fume
P264 – Wash hands thoroughly after handling
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear protective gloves, protective clothing, eye protection
P302+P352 – If on skin: Wash with plenty of water
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substance
Not applicable
3.2. Mixture
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()2/7NameProduct identifier%GHS-US classificationFormaldehyde, polymer with (chloromethyl)oxirane and phenol(CAS No) 9003-36-525 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Bisphenol A diglycidyl ether – bisphenol A copolymer(CAS No) 25036-25-325 – 50Skin Irrit. 2, H315reaction product: bisphenol-A-(epichlorhydrin), epoxy resin
(number average molecular weight 700)
(CAS No) 25068-38-63 – 5Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general :If you feel unwell, seek medical advice (show the label where possible).First-aid measures after inhalation :Move the affected person away from the contaminated area and into the fresh air. Call a
POISON CENTER or doctor/physician if you feel unwell. If breathing is difficult, remove victim
to fresh air and keep at rest in a position comfortable for breathing.
First-aid measures after skin contact :Remove affected clothing and wash all exposed skin area with mild soap and water, followed
by warm water rinse. If skin irritation or rash occurs: Get medical advice/attention.
First-aid measures after eye contact :IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion :Do not induce vomiting. Get immediate medical advice/attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries :Not expected to present a significant hazard under anticipated conditions of normal use.Symptoms/injuries after inhalation :None under normal use.Symptoms/injuries after skin contact :May cause an allergic skin reaction. May cause moderate irritation.Symptoms/injuries after eye contact :May cause slight irritation.Symptoms/injuries after ingestion :None under normal use.Symptoms/injuries upon intravenous
administration
:None under normal use.Chronic symptoms :Skin irritation, dermatitis and sensitisation.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media :Carbon dioxide. Dry powder. Foam. Water spray.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard :None under normal use.Explosion hazard :None under normal use.Reactivity :Product is not explosive.
5.3. Advice for firefighters
Precautionary measures fire :Evacuate area.Firefighting instructions :Exercise caution when fighting any chemical fire.Protection during firefighting :Self-contained breathing apparatus.Other information :Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
Protective equipment :Protective clothing.
6.1.2.For emergency responders
Emergency procedures :Ventilate area.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()3/7
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Collect spillage.Methods for cleaning up :This material and its container must be disposed of in a safe way, and as per local legislation.
Mechanically recover the product.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling :Ensure good ventilation of the work station.Hygiene measures :Do not eat, drink or smoke when using this product. Separate working clothes from town
clothes. Launder separately. Contaminated work clothing should not be allowed out of the
workplace. Wash contaminated clothing before reuse. Wash hands and other exposed areas
with mild soap and water before eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions :Keep container closed when not in use. Keep cool. Protect from sunlight.Storage area :Store away from heat. Store in a well-ventilated place.Special rules on packaging :Keep only in original container.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SA80 ADHESIVE FILM OSHAOSHA PEL (TWA) (mg/m )15 mg/m Assessed dust without specific effect (other
particles, not classified anywhere else)
OSHARemark (OSHA)Use care during processing to minimize generation of
dust
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Not applicablereaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Not applicableBisphenol A diglycidyl ether – bisphenol A copolymer (25036-25-3)Not applicable
8.2. Exposure controls
Appropriate engineering controls :Ensure good ventilation of the work station.Personal protective equipment :Gloves. Protective clothing. Safety glasses.
Hand protection :Protective gloves.Eye protection :Safety glasses.Environmental exposure controls :Avoid release to the environment.Other information :Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Solid
Colour :Green
Odour :odourless characteristic
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()4/7Odour threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :No data available
Flash point :No data available
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :No data available
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :No data available
Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
Product is not explosive.
10.2.Chemical stability
Stable under normal conditions.
10.3.Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4.Conditions to avoid
Heat.
10.5.Incompatible materials
No additional information available
10.6.Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedFormaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kgATE US (oral)11400.000 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Not classifiedRespiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Not classified
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()5/7Reproductive toxicity :Not classifiedSpecific target organ toxicity (single exposure):Not classifiedSpecific target organ toxicity (repeated
exposure)
:Not classifiedAspiration hazard :Not classifiedSymptoms/injuries after inhalation :None under normal use.Symptoms/injuries after skin contact :May cause an allergic skin reaction. May cause moderate irritation.Symptoms/injuries after eye contact :May cause slight irritation.Symptoms/injuries after ingestion :None under normal use.Symptoms/injuries upon intravenous
administration
:None under normal use.Chronic symptoms :Skin irritation, dermatitis and sensitisation.
SECTION 12: Ecological information
12.1.Toxicity
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2.Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3.Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4.Mobility in soil
No additional information available
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.
SECTION 13: Disposal considerations
13.1.Waste treatment methods
Regional legislation (waste) :Disposal must be done according to official regulations.Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Waste disposal recommendations :Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Not applicable
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()6/7
TDG
Transport by sea
Not applicable
Air transport
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the United States TSCA (Toxic Substances Control Act) inventoryreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the United States TSCA (Toxic Substances Control Act) inventoryBisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the United States TSCA (Toxic Substances Control Act) inventoryEPA TSCA Regulatory FlagY2 - Y2 - indicates an exempt polymer that is a polyester and is made only from reactants
included in a specified list of low concern reactants that comprises one of the eligibility criteria
for the exemption rule
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the Canadian DSL (Domestic Substances List)reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the Canadian DSL (Domestic Substances List)WHMIS ClassificationClass D Division 2 Subdivision B - Toxic material causing other toxic effectsBisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the EU NLP (No Longer Polymers) inventoryreaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the EU NLP (No Longer Polymers) inventory
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican national Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (25068-38-6)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
06/10/2016 USA ()7/7Bisphenol A diglycidyl ether - bisphenol A copolymer (25036-25-3)Listed on the AICS (Australian Inventory of Chemical Substances)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing & New Chemical Substances) inventory
Listed on the Korean ECL (Existing Chemicals List)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
15.3. US State regulations
No additional information available
SECTION 16: Other information
Revision date :06/10/2016Full text of H-statements:------H315Causes skin irritation------H317May cause an allergic skin reaction------H319Causes serious eye irritation------H400Very toxic to aquatic life------H411Toxic to aquatic life with long lasting effects------H412Harmful to aquatic life with long lasting effects
SDS US (GHS HazCom 2012)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as
guaranteeing any specific property of the product
by | Sep 27, 2025
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 6/23/2015 Revision date: 5/16/2022 Supersedes: 10/7/2019 Version: 2.0
5/16/2022 (Revision date) EN (English US) 1/9
SECTION 1: Identification
1.1. Identification
Product form
: Article
Name
: SA 80 Adhesive Film
1.2. Recommended use and restrictions on use
Recommended use
: The product is intended for professional use
1.3. Supplier
Supplier
Gurit (USA) Inc
115 Broadcommon Road
Rhode Island, 2809
USA
T +1 401 396 5008 (All Technical and Commercial Enquiries)
marine-na@gurit.com – www.Gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
Albacete, 02080
Spain
T +34 967 254 507 – F +34 967 254 005
Regulatory@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
: Carechem 24: +1 646 844 7309
Carechem 24 (Toll Free): +1 866 928 0789
Telephone number for use in case of chemical exposure, spillage or fire only.
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Skin corrosion/irritation Category 2
H315 Causes skin irritation
Skin sensitization, Category 1
H317 May cause an allergic skin reaction
Hazardous to the aquatic environment Chronic Hazard Category 3
H412 Harmful to aquatic life with long lasting effects
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US)
:
Signal word (GHS US)
: Warning
Hazard statements (GHS US)
: H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H412 – Harmful to aquatic life with long lasting effects
Precautionary statements (GHS US)
: P261 – Avoid breathing vapors.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
P302+P352 – If on skin: Wash with plenty of soap and water.
P321 – Specific treatment (see a doctor on this label).
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 2/9
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification Phenol, polymer with formaldehyde, glycidyl ether CAS-No.: 28064-14-4 10 50 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Formaldehyde, polymer with (chloromethyl)oxirane and phenol CAS-No.: 9003-36-5 10 25 Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Chronic 2, H411
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number
average molecular weight 700)
CAS-No.: 1675-54-3 3 5 Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
: Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
: Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact
: Rinse eyes with water as a precaution.
First-aid measures after ingestion
: Call a poison center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
: Water spray. Dry powder. Foam. Carbon dioxide.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 3/9
Unsuitable extinguishing media
: Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
: Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Precautionary measures fire
: Evacuate area.
Firefighting instructions
: Exercise caution when fighting any chemical fire.
Protection during firefighting
: Do not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
: Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
: Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapors.
6.1.2. For emergency responders
Protective equipment
: Do not attempt to take action without suitable protective equipment. For further information refer
to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
: Collect spillage.
Methods for cleaning up
: Mechanically recover the product.
Other information
: Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
: Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear personal
protective equipment. Avoid breathing vapors. Handle in accordance with good industrial
hygiene and safety practice.
Handling temperature
: 35 ( 0) C
Hygiene measures
: Wash contaminated clothing before reuse. Contaminated work clothing should not be allowed
out of the workplace. Do not eat, drink or smoke when using this product. Always wash hands
after handling the product. Separate working clothes from town clothes. Launder separately.
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
: Store in a well-ventilated place. Keep cool.
Maximum storage period
: 2 year
Storage temperature
: -23 13 C
Storage area
: Store away from heat. Store in a well-ventilated place.
Special rules on packaging
: Keep only in original container.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 4/9
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
SA 80 Adhesive Film No additional information available
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) No additional information available
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) No additional information available
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) No additional information available
8.2. Appropriate engineering controls
Appropriate engineering controls
: Ensure good ventilation of the work station.
Environmental exposure controls
: Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Hand protection: Protective gloves. Time of penetration is to be checked with the glove producer Type Material Permeation Thickness (mm) Penetration Disposable gloves Nitrile rubber (NBR)
Eye protection: Safety glasses
Skin and body protection: Wear suitable protective clothing. Long sleeved protective clothing Type Tyvek Gown/Coveralls
Respiratory protection: In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory protection
equipment is recommended
Device Filter type Condition Disposable half mask Gas/vapor filter vapor protection
Personal protective equipment symbol(s):
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 5/9
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
: Solid
Appearance
: Flexible Sheet.
Color
: Green
Odor
: odorless
Odor threshold
: No data available
pH
: Not applicable
Melting point
: Not applicable
Freezing point
: Not applicable
Boiling point
: Not applicable
Flash point
: > 100 C Estimated on the basis of the constituents :
Relative evaporation rate (butyl acetate=1)
: No data available
Flammability (solid, gas)
: > 100 C estimated
Non flammable.
Vapor pressure
: Not applicable
Relative vapor density at 20 C
: Not applicable
Relative density
: No data available
Solubility
: insoluble in water.
Partition coefficient n-octanol/water (Log Pow)
: No data available
Auto-ignition temperature
: Not applicable
Decomposition temperature
: No data available
Viscosity, kinematic
: Not applicable
Viscosity, dynamic
: No data available
Explosion limits
: Not applicable
Explosive properties
: Product is not explosive.
Oxidizing properties
: No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions. Stable at ambient temperature and under normal conditions of use.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 6/9
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
: Not classified
Acute toxicity (dermal)
: Not classified
Acute toxicity (inhalation)
: Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LD50 oral rat > 10000 mg/kg LD50 dermal rat > 2000 mg/kg
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LD50 oral rat > 2000 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 420
(Acute Oral Toxicity – Fixed Dose Method)
LD50 dermal rat > 2000 mg/kg body weight Animal: rat, Guideline: OECD Guideline 402 (Acute Dermal
Toxicity), Guideline: EU Method B.3 (Acute Toxicity (Dermal))
Skin corrosion/irritation
: Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation
: Not classified
pH: Not applicable
Respiratory or skin sensitization
: May cause an allergic skin reaction.
Germ cell mutagenicity
: Not classified
Carcinogenicity
: Not classified
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) NOAEL (chronic,oral,animal/male,2 years) 15 mg/kg body weight Animal: rat, Animal sex: male, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
NOAEL (chronic,oral,animal/female,2 years) 100 mg/kg body weight Animal: rat, Animal sex: female, Guideline: OECD Guideline 453
(Combined Chronic Toxicity / Carcinogenicity Studies), Guideline: EPA OPPTS 870.4300
(Combined Chronic Toxicity / Carcinogenicity), Guideline: other:, Remarks on results: other:
IARC group 3 – Not classifiable
Reproductive toxicity
: Not classified
STOT-single exposure
: Not classified
STOT-repeated exposure
: Not classified
Aspiration hazard
: Not classified
Viscosity, kinematic
: Not applicable
Symptoms/effects after skin contact
: Irritation. May cause an allergic skin reaction.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
: Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) LC50 – Fish [1] < 1 mg/l
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LC50 - Fish [1] 1.2 mg/l Test organisms (species): Oncorhynchus mykiss (previous name: Salmo gairdneri) LC50 - Fish [2] 2 mg/l
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 7/9 reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) LOEC (chronic) 1 mg/l Test organisms (species): Daphnia magna Duration: '21 d' NOEC (chronic) 0.3 mg/l Test organisms (species): Daphnia magna Duration: '21 d'
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Persistence and degradability May cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Bioaccumulative potential Not established.
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste)
: Disposal must be done according to official regulations.
Waste treatment methods
: Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
: Avoid release to the environment. Dispose in a safe manner in accordance with local/national
regulations.
Ecology - waste materials
: Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / IMDG / IATA
DOT IMDG IATA 14.1. UN number Not regulated for transport 14.2. Proper Shipping Name Not applicable Not applicable Not applicable 14.3. Transport hazard class(es) Not applicable Not applicable Not applicable 14.4. Packing group Not applicable Not applicable Not applicable 14.5. Environmental hazards Not applicable Not applicable
Not applicable No supplementary information available
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 8/9 14.6. Special precautions for user
DOT
No data available
IMDG
No data available
IATA
No data available
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. US Federal regulations
All components of this product are present and listed as Active on the United States Environmental Protection Agency Toxic Substances Control Act
(TSCA) inventory
This product or mixture is not known to contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40
CFR 372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40
CFR Part 372.
15.2. International regulations
CANADA
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the Canadian DSL (Domestic Substances List)
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed on the Canadian DSL (Domestic Substances List)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed on the EU NLP (No Longer Polymers) inventory
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed on the EU NLP (No Longer Polymers) inventory
SA 80 Adhesive Film
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
5/16/2022 (Revision date) EN (English US) 9/9
National regulations
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on INSQ (Mexican National Inventory of Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
Phenol, polymer with formaldehyde, glycidyl ether (28064-14-4) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
reaction product: bisphenol-A-(epichlorhydrin), epoxy resin (number average molecular weight 700) (1675-54-3) Listed introduction on Australian Industrial Chemicals Introduction Scheme (AICIS Inventory)
Listed on IECSC (Inventory of Existing Chemical Substances Produced or Imported in China)
Listed on the Japanese ENCS (Existing New Chemical Substances) inventory
Listed on KECL/KECI (Korean Existing Chemicals Inventory)
Listed on NZIoC (New Zealand Inventory of Chemicals)
Listed on PICCS (Philippines Inventory of Chemicals and Chemical Substances)
Listed on CICR (Turkish Inventory and Control of Chemicals)
15.3. US State regulations
California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or
reproductive harm
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date
: 05/16/2022
Full text of H-phrases H315 Causes skin irritation H317 May cause an allergic skin reaction H319 Causes serious eye irritation H411 Toxic to aquatic life with long lasting effects H412 Harmful to aquatic life with long lasting effects
Safety Data Sheet (SDS), USA
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organization is prohibited without Gurit's prior written consent.
by | Sep 27, 2025
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
Date of issue: 23/06/2015 Revision date: 22/06/2018 Supersedes: 15/05/2018 Version: 2.7
EN (English) 1/6
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form
:Article
Name
:SA 80 Adhesive Film
Type of product
:Substance/preparation on or in a carrier material
1.2. Relevant identified uses of the substance or mixture and uses advised against
1.2.1. Relevant identified uses
Main use category
:Industrial use
Industrial/Professional use spec
:For professional use only
1.2.2. Uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
Supplier
Gurit (UK) Ltd
St Cross Business Park
Newport
PO30 5WU Isle of Wight – United Kingdom
T +44 (0) 1983 828 000
regulatory@gurit.com – www.gurit.com
Manufacturer
Gurit (Spain) Ltd
Pol gono Industrial Romica C/K
Parcela 11C, APDO.447
02080 Albacete – Spain
T +34 967 254 507 – F +34 967 254 005
info-es@gurit.com – www.Gurit.com
1.4. Emergency telephone number
Emergency number
:Carechem 24: +44 (0) 1273 289451
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Skin corrosion/irritation, Category 2
H315
Skin sensitisation, Category 1
H317
Hazardous to the aquatic environment Chronic Hazard, Category 3
H412
Full text of H statements : see section 16
Adverse physicochemical, human health and environmental effects
Causes skin irritation. May cause an allergic skin reaction. Harmful to aquatic life with long lasting effects.
2.2. Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]Extra labelling to displayExtra classification(s) to display
Hazard pictograms (CLP)
:GHS07
Signal word (CLP)
:Warning
Hazardous ingredients
:Formaldehyde, polymer with (chloromethyl)oxirane and phenol; reaction product:
bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700)
Hazard statements (CLP)
:H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H412 – Harmful to aquatic life with long lasting effects.
Precautionary statements (CLP)
:P261 – Avoid breathing vapours.
P264 – Wash hands thoroughly after handling.
P272 – Contaminated work clothing should not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear protective gloves, protective clothing, eye protection.
P302+P352 – IF ON SKIN: Wash with plenty of water.
EUH-statements
:EUH205 – Contains epoxy constituents. May produce an allergic reaction.
2.3. Other hazards
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 2/6
22/06/2018 (Version: 2.7)
3.2. Mixtures
NameProduct identifier%Classification according to
Regulation (EC) No.
1272/2008 [CLP]
Formaldehyde, polymer with (chloromethyl)oxirane
and phenol
(CAS-No.) 9003-36-5
(EC-No.) 500-006-8
(REACH-no) 01-2119454393-40
25 – 50Skin Irrit. 2, H315
Skin Sens. 1, H317
Aquatic Acute Not classified
Aquatic Chronic 2, H411
Bisphenol A diglycidyl ether – bisphenol A copolymer(CAS-No.) 25036-25-3
(EC-No.) 607-500-3
25 – 50Skin Irrit. 2, H315reaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 25068-38-6
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
3 – 5Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
Aquatic Chronic 2, H411
Specific concentration limits:NameProduct identifierSpecific concentration limitsreaction product: bisphenol-A-(epichlorhydrin); epoxy
resin (number average molecular weight 700)
(CAS-No.) 25068-38-6
(EC-No.) 500-033-5
(EC Index-No.) 603-074-00-8
(REACH-no) 01-2119456619-26
(C >= 5) Skin Irrit. 2, H315
(C >= 5) Eye Irrit. 2, H319
Full text of H-statements: see section 16
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation
:Remove person to fresh air and keep comfortable for breathing.
First-aid measures after skin contact
:Wash skin with plenty of water. Take off contaminated clothing. If skin irritation or rash
occurs: Get medical advice/attention.
First-aid measures after eye contact
:Rinse eyes with water as a precaution.
First-aid measures after ingestion
:Call a poison center or a doctor if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/effects after skin contact
:Irritation. May cause an allergic skin reaction.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media
:Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Hazardous decomposition products in case of fire
:Toxic fumes may be released.
5.3. Advice for firefighters
Precautionary measures fire
:Evacuate area.
Firefighting instructions
:Exercise caution when fighting any chemical fire.
Protection during firefighting
:Do not attempt to take action without suitable protective equipment. Self-contained
breathing apparatus. Complete protective clothing.
Other information
:Collect contaminated fire fighting water seperately. It must not enter drains.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:Ventilate spillage area. Avoid contact with skin and eyes. Avoid breathing vapours.
6.1.2. For emergency responders
Protective equipment
:Do not attempt to take action without suitable protective equipment. For further information
refer to section 8: “Exposure controls/personal protection”.
6.2. Environmental precautions
Avoid release to the environment. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment
:Collect spillage.
Methods for cleaning up
:Mechanically recover the product.
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 3/6
22/06/2018 (Version: 2.7)
Other information
:Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13. For further information refer to section 8: “Exposure controls/personal protection”.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:Ensure good ventilation of the work station. Avoid contact with skin and eyes. Wear
personal protective equipment. Avoid breathing vapours. Handle in accordance with good
industrial hygiene and safety practice.
Handling temperature
:<= 35 ( 0) C
Hygiene measures
:Wash contaminated clothing before reuse. Contaminated work clothing should not be
allowed out of the workplace. Do not eat, drink or smoke when using this product. Always
wash hands after handling the product. Separate working clothes from town clothes.
Launder separately. Wash hands and other exposed areas with mild soap and water
before eating, drinking or smoking and when leaving work.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:Store in a well-ventilated place. Keep cool.
Maximum storage period
:2 year
Storage temperature
:-23 - 13 C
Storage area
:Store away from heat. Store in a well-ventilated place.
Special rules on packaging
:Keep only in original container.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls:
Ensure good ventilation of the work station.
Personal protective equipment:
Safety glasses.
Hand protection:Protective glovesTypeMaterialPermeationThickness (mm)PenetrationStandardDisposable glovesNitrile rubber (NBR)EN 374Eye protection:Safety glassesSkin and body protection:Wear suitable protective clothing. Long sleeved protective clothingTypeStandardTyvek Gown/CoverallsEN 13034
Respiratory protection:In case of insufficient ventilation, wear suitable respiratory equipment. Where exposure through inhalation may occur from use, respiratory
protection equipment is recommended
Device Filter typeConditionStandardDisposable half maskGas/vapour filterVapour protectionEN 405
Personal protective equipment symbol(s):
Environmental exposure controls:
Avoid release to the environment.
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 4/6
22/06/2018 (Version: 2.7)
Other information:
Industrial and professional. Perform risk assessment prior to use. Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:Solid
Appearance
:Flexible Sheet.
Colour
:Green.
Odour
:odourless.
Odour threshold
:No data available
pH
:Not applicable
Relative evaporation rate (butylacetate=1)
:No data available
Melting point
:No data available
Freezing point
:Not applicable
Boiling point
:No data available
Flash point
:Not applicable
Auto-ignition temperature
:Not applicable
Decomposition temperature
:No data available
Flammability (solid, gas)
:> 100 C estimated
Non flammable.
Vapour pressure
:No data available
Relative vapour density at 20 C
:No data available
Relative density
:Not applicable
Solubility
:No data available
Log Pow
:No data available
Viscosity, kinematic
:No data available
Viscosity, dynamic
:No data available
Explosive properties
:No data available
Oxidising properties
:No data available
Explosive limits
:Not applicable
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport. Product is not explosive.
10.2. Chemical stability
Stable under normal conditions. Stable at ambient temperature and under normal conditions of use.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral)
:Not classified
Acute toxicity (dermal)
:Not classified
Acute toxicity (inhalation)
:Not classified
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LD50 oral rat> 2 g/kgreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LD50 oral rat11400 mg/kg
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 5/6
22/06/2018 (Version: 2.7)
Skin corrosion/irritation :Causes skin irritation.
pH: Not applicable
Serious eye damage/irritation
:Not classified
pH: Not applicable
Respiratory or skin sensitisation
:May cause an allergic skin reaction.
Germ cell mutagenicity
:Not classified
Carcinogenicity
:Not classified
Reproductive toxicity
:Not classified
STOT-single exposure
:Not classified
STOT-repeated exposure
:Not classified
Aspiration hazard
:Not classified
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general
:Harmful to aquatic life with long lasting effects.
Acute aquatic toxicity
:Not classified
Chronic aquatic toxicity
:Harmful to aquatic life with long lasting effects.
Formaldehyde, polymer with (chloromethyl)oxirane and phenol (9003-36-5)LC50 fish 1< 1 mg/lreaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)LC50 fish 11.5 mg/lLC50 fish 22 mg/l
12.2. Persistence and degradability
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Persistence and degradabilityMay cause long-term adverse effects in the environment.
12.3. Bioaccumulative potential
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight 700) (25068-38-6)Bioaccumulative potentialNot established.
12.4. Mobility in soil
No additional information available
12.5. Results of PBT and vPvB assessment
No additional information available
12.6. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Regional legislation (waste)
:Disposal must be done according to official regulations.
Waste treatment methods
:Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations
:Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Ecology - waste materials
:Avoid release to the environment.
European List of Waste (LoW) code
:08 04 09* - waste adhesives and sealants containing organic solvents or other dangerous
substances
SECTION 14: Transport information
In accordance with ADR / IATA / IMDG
ADRIMDG IATA14.1. UN numberNot regulatedNot regulated Not regulated14.2. UN proper shipping nameNot regulatedNot regulated Not regulated
SA 80 Adhesive Film
Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH) with its amendment Regulation (EU) 2015/830
23/06/2015 (Version: 1.0)EN (English) 6/6
22/06/2018 (Version: 2.7)
14.3. Transport hazard class(es)Not regulatedNot regulated Not regulated14.4. Packing groupNot regulatedNot regulated Not regulated14.5. Environmental hazardsNot regulatedNot regulated Not regulatedNo supplementary information available
14.6. Special precautions for user
Overland transport
Not regulated
Transport by sea
Not regulated
Air transport
Not regulated
14.7. Transport in bulk according to Annex II of Marpol and the IBC Code
Not applicable
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1. EU-Regulations
Contains no substance on the REACH candidate list
Directive 2012/18/EU (SEVESO III)
15.1.2. National regulations
No additional information available
15.2. Chemical safety assessment
No chemical safety assessment has been carried out
SECTION 16: Other information
Full text of H- and EUH-statements:Aquatic Acute Not classifiedHazardous to the aquatic environment - Acute Hazard Not classifiedAquatic Chronic 2Hazardous to the aquatic environment Chronic Hazard, Category 2Eye Irrit. 2Serious eye damage/eye irritation, Category 2Skin Irrit. 2Skin corrosion/irritation, Category 2Skin Sens. 1Skin sensitisation, Category 1H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H411Toxic to aquatic life with long lasting effects.H412Harmful to aquatic life with long lasting effects.EUH205Contains epoxy constituents. May produce an allergic reaction.Classification and procedure used to derive the classification for mixtures according to Regulation (EC) 1272/2008 [CLP]:Skin Irrit. 2H315Calculation methodSkin Sens. 1H317Calculation methodAquatic Chronic 3H412Expert judgment
SDS EU (REACH Annex II)
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental
requirements only. It should not therefore be construed as guaranteeing any specific property of the product The information contained within this
document is Gurit copyright and any distribution or publication beyond the recipient's organisation is prohibited without Gurit's prior written consent.
