15TMGP4100A_SDS.pdf

by | Sep 27, 2025

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 1 of 9
1. Product and company identification
Product identifier
Trade name: TMFP 3100, 3200
Relevant identified uses of the substance or mixture and uses advised against
General use: Fiberglass / epoxy prepreg
For industrial purposes only
Details of the supplier of the safety data sheet
Company name:
Airtech International, Inc.
5700 Skylab Road
Huntington Beach, CA 92647
E-mail: airtech@airtechintl.com
Website: www.airtechonline.com
Telephone: +1 714.899.8100
Dept. responsible for information:
Telephone: +1 714.899.8100
E-mail: airtech@airtechintl.com
Airtech Europe Sarl
Zone industrielle Haneboesch
L 4562 Differdange
Luxembourg
Website: www.airtech.lu
Telephone: +352 582.282
Dept. responsible for information:
Telephone: +352 582.282
E-mail: sales@airtech.lu
Tygavac Advanced Materials Ltd.
The Causeway
Broadway Business Park
Chadderton, Oldham
OL9 9XD United Kingdom
Website: www.tygavac.co.uk
Telephone: +44 161.947.1610
Dept. responsible for information:
Telephone: +44 161.947.1610
E-mail: sales@tygavac.co.uk
Airtech Asia Ltd.
No. 161 of Anyuan Rd
Chagugang County
Wuqing District
301721, Tianjin, P.R. China
Website: www.airtech.asia
Telephone: +86 22 8862 9800
Telefax:: +86 22 8862 9900
Dept. responsible for information:
Telephone: +86 22 8862 9800
E-mail: airtech.asia@airtechasia.com.cn
Emergency phone number
CHEMTREC EMERGENCY PHONE:
Within USA/Canada: 1-(800)424-9300
International: +1 703-741-5970
2. Hazards identification
Emergency overview
Appearance: Physical state at 68 F and 101.3 kPa: solid
Form: Carbon fabric impregnated with viscous blue paste
Color: blue
Odor: characteristic
Classification: Skin Irritation – Category 2; Eye Irritation – Category 2A; Sensitization – skin –
Category 1; Germ cell mutagenicity – Category 2; Carcinogenicity – Category 2;
Aquatic toxicity – chronic – Category 2;
Hazard symbols:
Signal word: Warning
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 2 of 9
Hazard statements:
Causes skin irritation.
May cause an allergic skin reaction.
Causes serious eye irritation.
Suspected of causing genetic defects.
Suspected of causing cancer.
Toxic to aquatic life with long lasting effects.
Precautionary statements:
Obtain special instructions before use.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Wash hands and face thoroughly after handling.
Contaminated work clothing should not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of water/soap.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Specific treatment (see ‘ First aid ‘ on this label).
If skin irritation occurs: Get medical advice/attention.
If skin irritation or rash occurs: Get medical advice/attention.
If eye irritation persists: Get medical advice/attention.
Take off contaminated clothing and wash it before reuse.
Collect spillage.
Store locked up.
Dispose of contents/container to hazardous or special waste collection point.
Regulatory status
This material is considered hazardous by the U.S. OSHA Hazard Communication
Standard (29 CFR 1910.1200) and SIMDUT in Canada.
Hazards not otherwise classified
see section 11: Toxicological information
3. Composition / Information on ingredients
Chemical characterization:
Fibreglass fabric impregnated with an epoxy resin system
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 3 of 9
Relevant ingredients:
CAS No. Designation Content Classification
CAS
28064-14-4
Bisphenol-F-
epichlorhydrine resin
25 – 50 % Skin Irritation – Category 2.
Eye Irritation – Category 2A.
Sensitization – skin – Category 1.
Aquatic toxicity – chronic – Category 2.
CAS 5026-74-4p-(2,3-Epoxypropoxy)-
N,N-bis(2,3-epoxypropyl)
aniline
10 – 20 % Acute Toxicity – oral – Category 4.
Skin Irritation – Category 2.
Sensitization – skin – Category 1.
Germ cell mutagenicity – Category 2.
Aquatic toxicity – chronic – Category 2.
CAS 80-08-0 4,4’-Diamino diphenyl
sulfone
10 – 20 % Acute Toxicity – oral – Category 4.
CAS
25068-38-6
Reaction product:
Bisphenol-A-
(epichlorhydrin) epoxy
resin (number average
molecular weight <=700) < 2 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 150-68-5Monuron (ISO) < 2 % Acute Toxicity - oral - Category 4. Carcinogenicity - Category 2. Aquatic toxicity - acute - Category 1. Aquatic toxicity - chronic - Category 1. Additional information:Contains Silicon dioxide. The maximum workplace exposure limits are, where necessary, listed in section 8. 4. First aid measures In case of inhalation:Remove the casualty into fresh air and keep him calm. In case of breathing difficulties administer oxygen. No mouth-to-mouth or mouth-to-nose resuscitation. Use Ambu bag or ventilator. Immediately get medical attention. Following skin contact:Take off contaminated clothing and wash it before reuse. Wash immediately with plenty of water. Seek medical attention if irritation persists. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist. After swallowing: Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do not induce vomiting. Immediately get medical attention. Most important symptoms/effects, acute and delayed Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. Information to physician Treat symptomatically. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 4 of 9 5. Fire fighting measures Flash point/flash point range: Not applicable Auto-ignition temperature: No data available Suitable extinguishing media: Water spray jet, foam, dry chemical powder. Extinguishing media which must not be used for safety reasons: Full water jet Specific hazards arising from the chemical In case of fire may be liberated: nitrogen oxides (NOx), aldehydes, acids, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool exposed containers with water spray. Use a water fog to control vapors. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Avoid exposure. Provide adequate ventilation. Wear appropriate protective equipment. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. Keep unprotected people away. Environmental precautions: Do not allow to enter into ground-water, surface water or drains. Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Final cleaning. 7. Handling and storage Handling Advices on safe handling:Obtain special instructions before use. Provide adequate ventilation. Wear appropriate protective equipment. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. When using do not eat, drink or smoke. Wash hands before breaks and after work. Eye wash facility must be provided. Storage Requirements for storerooms and containers: Keep container tightly closed in a cool, well-ventilated place. Refrigerated storage is recommended to maintain product quality. This product may be stored at 41 F for up to 12 months. Hints on joint storage:Incompatible materials: Strong oxidizing agents, strong Lewis acids or mineral acids. Keep away from food, drink and animal feedingstuffs. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 5 of 9 8. Exposure controls / personal protection Exposure guidelines Occupational exposure limit values: CAS No. Designation Type Limit value 7631-86-9 Silicon dioxideUSA: NIOSH: TWA 6 mg/m USA: OSHA: TWA 20 mppcf USA: OSHA: TWA 80 mg/m (total dust) Engineering controls Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionTightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Neoprene or rubber. Observe glove manufacturer's instructions concerning penetrability and breakthrough time. Respiratory protection:Respiratory protection must be worn whenever the TLV (WEL) levels have been exceeded. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. General hygiene considerations: Avoid exposure - obtain special instructions before use. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not breathe gas/fume/vapour/spray. Have eye wash bottle or eye rinse ready at work place. Wash hands before breaks and after work. When using do not eat or drink. 9. Physical and chemical properties Information on basic physical and chemical properties Appearance: Physical state at 68 F and 101.3 kPa: solid Form: Carbon fabric impregnated with viscous blue paste Color: blue Odor: characteristic Odor threshold: No data available pH value: not applicable Melting point/freezing point: No data available Initial boiling point and boiling range:No data available Flash point/flash point range: Not applicable Evaporation rate: No data available Flammability: No data available Explosion limits: No data available Vapor pressure: No data available Vapor density: >= 1
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 6 of 9
Density: No data available
Water solubility: negligible
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
This product may be stored at 41 F for up to 12 months.
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong Lewis acids or mineral acids
Hazardous decomposition products:
Exothermal decomposition with formation of: toxic gases, Nitrogen oxides (NOx),
aldehydes, acids, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
ATEmix calculated: > 2000 mg/kg
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Skin Irritation – Category 2 = Causes skin irritation.
Serious eye damage/irritation: Eye Irritation –
Category 2A = Causes serious eye irritation.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Germ cell mutagenicity –
Category 2 = Suspected of causing genetic defects.
Carcinogenicity: Carcinogenicity – Category 2 = Suspected of causing cancer.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 7 of 9
Other information: Chronic toxicity – Carcinogenic effect:
4,4′-Diamino diphenylsulfone:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO):
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Silicon dioxide:
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
12. Ecological information
Ecotoxicity
Aquatic toxicity: Toxic to aquatic life with long lasting effects.
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
Additional ecological information
General information:Do not allow to enter into ground-water, surface water or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation.
Handle contaminated packages in the same way as the substance itself.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: not applicable
Air transport (IATA)
Proper shipping name: Not restricted
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard
Z400.1-2010
TMFP 3100, 3200
Material number 1057
Revision date: 9/4/2018
Version: 12
Language: en-US
Date of first version:11/23/2009
Page: 8 of 9
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Bisphenol-F-epichlorhydrine resin: TSCA Inventory: listed; UVCB; EPA flags
XU
TSCA HPVC: not listed
p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline: TSCA Inventory: listed; EPA flags T
TSCA HPVC: not listed
4,4′-Diamino diphenyl sulfone: TSCA Inventory: listed
TSCA HPVC: not listed
Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin
(number average molecular weight <=700): TSCA Inventory: listed; EPA flags XU TSCA HPVC: not listed Monuron (ISO): TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed Other Environmental Laws: SARA Title III Section 313, Toxic Release: Conc. 1.0% / Threshold Standard Silicon dioxide: TSCA Inventory: listed TSCA HPVC: not listed Carcinogen Status: IARC Rating: Group 3 OSHA Carcinogen: not listed NTP Rating: not listed NIOSH Recommendations: Occupational Health Guideline: 0552 National regulations - Great Britain Hazchem-Code: - 16. Other information Text for labeling: Contains 25 - 50 % Bisphenol-F-epichlorhydrine resin, 10 - 20 % p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline, 10 - 20 % 4,4'-Diamino diphenyl sulfone, < 2 % Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <=700), < 2 % Monuron (ISO). Safety data sheet available on request. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMFP 3100, 3200 Material number 1057 Revision date: 9/4/2018 Version: 12 Language: en-US Date of first version:11/23/2009 Page: 9 of 9 Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Company/undertaking identification Department issuing data sheet Contact person: see section 1: Dept. responsible for information This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 1 of 8 1. Product and company identification Product identifier Trade name: TMGP-4000, 4100, 4200 Relevant identified uses of the substance or mixture and uses advised against General use: Carbon epoxy prepreg For industrial purposes only Details of the supplier of the safety data sheet Company name: Airtech International, Inc. 5700 Skylab Road Huntington Beach, CA 92647 E-mail: airtech@airtechintl.com Website: www.airtechonline.com Telephone: +1 714.899.8100 Dept. responsible for information: Telephone: +1 714.899.8100 E-mail: airtech@airtechintl.com Airtech Europe Sarl Zone industrielle Haneboesch L 4562 Differdange Luxembourg Website: www.airtech.lu Telephone: +352 582.282 Dept. responsible for information: Telephone: +352 582.282 E-mail: sales@airtech.lu Tygavac Advanced Materials Ltd. The Causeway Broadway Business Park Chadderton, Oldham OL9 9XD United Kingdom Website: www.tygavac.co.uk Telephone: +44 161.947.1610 Dept. responsible for information: Telephone: +44 161.947.1610 E-mail: sales@tygavac.co.uk Airtech Asia Ltd. No. 161 of Anyuan Rd Chagugang County Wuqing District 301721, Tianjin, P.R. China Website: www.airtech.asia Telephone: +86 22 8862 9800 Telefax:: +86 22 8862 9900 Dept. responsible for information: Telephone: +86 22 8862 9800 E-mail: airtech.asia@airtechasia.com.cn Emergency phone number CHEMTREC EMERGENCY PHONE: Within USA/Canada: 1-(800)424-9300 International: +1 703-741-5970 2. Hazards identification Emergency overview Appearance: Form: Carbon fabric impregnated with viscous blue paste Color: blue Odor: characteristic Classification: Skin Irritation - Category 2; Eye Irritation - Category 2A; Sensitization - skin - Category 1; Germ cell mutagenicity - Category 2; Carcinogenicity - Category 2; Aquatic toxicity - chronic - Category 2; Hazard symbols: Signal word: Warning printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 2 of 8 Hazard statements: Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Suspected of causing genetic defects. Suspected of causing cancer. Toxic to aquatic life with long lasting effects. Precautionary statements: Obtain special instructions before use. Avoid breathing dust/fume/gas/mist/vapors/spray. Wash hands and face thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN: Wash with plenty of water/soap. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Get medical advice/attention. Specific treatment (see ' First aid ' on this label). If skin irritation occurs: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Take off contaminated clothing and wash it before reuse. Collect spillage. Store locked up. Dispose of contents/container to hazardous or special waste collection point. Regulatory status This material is considered hazardous by the U.S. OSHA Hazard Communication Standard (29 CFR 1910.1200) and SIMDUT in Canada. Hazards not otherwise classified see section 11: Toxicological information 3. Composition / Information on ingredients Chemical characterization: Carbon fabric impregnated with an epoxy resin system printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 3 of 8 Relevant ingredients: CAS No. Designation Content Classification CAS 28064-14-4 Bisphenol-F- epichlorhydrine resin < 50 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 5026-74-4p-(2,3-Epoxypropoxy)-N,N- bis(2,3-epoxypropyl)aniline < 25 % Acute Toxicity - oral - Category 4. Skin Irritation - Category 2. Sensitization - skin - Category 1. Germ cell mutagenicity - Category 2. Aquatic toxicity - chronic - Category 2. CAS 80-08-0 4,4'-Diamino diphenyl sulfone < 25 % Acute Toxicity - oral - Category 4. CAS 25068-38-6 Reaction product: Bisphenol-A- (epichlorhydrin) epoxy resin (number average molecular weight <=700) < 2 % Skin Irritation - Category 2. Eye Irritation - Category 2A. Sensitization - skin - Category 1. Aquatic toxicity - chronic - Category 2. CAS 150-68-5Monuron (ISO) < 2 % Acute Toxicity - oral - Category 4. Carcinogenicity - Category 2. Aquatic toxicity - acute - Category 1. Aquatic toxicity - chronic - Category 1. 4. First aid measures In case of inhalation:Remove the casualty into fresh air and keep him calm. In case of breathing difficulties administer oxygen. Immediately get medical attention. Following skin contact:Take off contaminated clothing and wash it before reuse. After contact with skin, wash immediately with soap and plenty of water. Seek medical attention if irritation persists. After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist. After swallowing: Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do not induce vomiting. Immediately get medical attention. Most important symptoms/effects, acute and delayed Causes serious eye irritation. Causes skin irritation. May cause an allergic skin reaction. Information to physician Treat symptomatically. 5. Fire fighting measures Flash point/flash point range: Decomposes before flashing. Auto-ignition temperature: No data available Suitable extinguishing media: Water spray jet, foam, dry chemical powder, carbon dioxide. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 4 of 8 Extinguishing media which must not be used for safety reasons: Full water jet Specific hazards arising from the chemical In case of fire may be liberated: nitrogen oxides (NOx), sulphur oxides, aldehydes, acids, carbon monoxide and carbon dioxide. Protective equipment and precautions for firefighters: Wear a self-contained breathing apparatus and chemical protective clothing. Additional information:Cool exposed containers with water spray. Use a water fog to control vapors. Do not allow fire water to penetrate into surface or ground water. 6. Accidental release measures Personal precautions:Avoid exposure. Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not inhale substance. Wear appropriate protective equipment. Keep unprotected people away. Environmental precautions: Do not allow to enter into ground-water, surface water or drains. Methods for clean-up:Take up mechanically, placing in appropriate containers for disposal. Final cleaning. Do not touch or step on spilled substance. 7. Handling and storage Handling Advices on safe handling:Obtain special instructions before use. Provide adequate ventilation. Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it before reuse. Do not inhale substance. Wear appropriate protective equipment. When using do not eat, drink or smoke. Wash hands before breaks and after work. Eye wash facility must be provided. Storage Requirements for storerooms and containers: Refrigerated storage is recommended to maintain product quality. This product may be stored at -0.4 F for up to 12 months. Store locked up. Hints on joint storage:Incompatible materials: Strong oxidizing agents, strong Lewis acids or mineral acids. Keep away from food, drink and animal feedingstuffs. 8. Exposure controls / personal protection Engineering controls Provide good ventilation and/or an exhaust system in the work area. See also information in chapter 7, section storage. Personal protection equipment (PPE) Eye/face protectionTightly sealed goggles according to OSHA Standard - 29 CFR: 1910.133 or ANSI Z87.1-2010. Skin protection Wear suitable protective clothing. printed by Airtech Advanced Materials Group with Qualisys SUMDAT SAFETY DATA SHEET in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010 TMGP-4000, 4100, 4200 Material number 1058 Revision date: 9/4/2018 Version: 13 Language: en-US Date of first version:5/24/2008 Page: 5 of 8 Protective gloves according to OSHA Standard - 29 CFR: 1910.138. Glove material: Neoprene or rubber Breakthrough time: >480 min.
Observe glove manufacturer’s instructions concerning penetrability and breakthrough time.
Respiratory protection:Provide adequate ventilation.
Processing, e.g. by cutting, sawing or grinding, can produce particles and dust.
Wear a dust mask, in case of excessive dust.
Recommendation: Particulates filter N100 according to OSHA Standard – 29 CFR:
1910.134 or ANSI Z88.2.
General hygiene considerations:
Avoid exposure – obtain special instructions before use. Have eye wash bottle or eye
rinse ready at work place.
Wash hands before breaks and after work. When using do not eat or drink.
Avoid contact with skin, eyes, and clothing. Take off contaminated clothing and wash it
before reuse.
9. Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Form: Carbon fabric impregnated with viscous blue paste
Color: blue
Odor: characteristic
Odor threshold: No data available
pH value: No data available
Melting point/freezing point: No data available
Initial boiling point and boiling range:No data available
Flash point/flash point range: Decomposes before flashing.
Evaporation rate: No data available
Flammability: No data available
Explosion limits: No data available
Vapor pressure: No data available
Vapor density: No data available
Density: No data available
Water solubility: practically insoluble
Partition coefficient: n-octanol/water:No data available
Auto-ignition temperature: No data available
Thermal decomposition: No data available
Additional information: No data available
10. Stability and reactivity
Reactivity: No data available
Chemical stability:Stable under recommended storage conditions.
Possibility of hazardous reactions
No dangerous reactions with proper and specified storage and handling
Conditions to avoid:Keep away from heat.
Incompatible materials:Strong oxidizing agents, strong Lewis acids or mineral acids
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 6 of 8
Hazardous decomposition products:
Exothermal decomposition with formation of: toxic gases, nitrogen oxides (NOx), sulphur
oxides, aldehydes, acids, carbon monoxide and carbon dioxide.
Thermal decomposition:No data available
11. Toxicological information
Toxicological tests
Toxicological effects:The statements are derived from the properties of the single components. No toxicological
data is available for the product as such.
Acute toxicity (oral): Based on available data, the classification criteria are not met.
ATEmix calculated: > 2000 mg/kg
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Skin Irritation – Category 2 = Causes skin irritation.
Serious eye damage/irritation: Eye Irritation –
Category 2A = Causes serious eye irritation.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Sensitization – skin – Category 1 = May cause an allergic skin reaction.
Germ cell mutagenicity/Genotoxicity: Germ cell mutagenicity –
Category 2 = Suspected of causing genetic defects.
Carcinogenicity: Carcinogenicity – Category 2 = Suspected of causing cancer.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Other information: Chronic toxicity – Carcinogenic effect:
4,4′-Diamino diphenylsulfone:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO):
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
12. Ecological information
Ecotoxicity
Aquatic toxicity: Harmful to aquatic life with long lasting effects.
Mobility in soil
No data available
Persistence and degradability
Further details: No data available
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 7 of 8
Additional ecological information
General information:Do not allow to enter into ground-water, surface water or drains.
13. Disposal considerations
Product
Recommendation: Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Contaminated packaging
Recommendation: Dispose of waste according to applicable legislation.
14. Transport information
USA: Department of Transportation (DOT)
Proper shipping name: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: not applicable
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
15. Regulatory information
National regulations – U.S. Federal Regulations
Product: TSCA: All components listed
4,4′-Diamino diphenyl sulfone:Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Monuron (ISO): Carcinogen Status:
IARC Rating: Group 3
OSHA Carcinogen: not listed
NTP Rating: not listed
Other Environmental Laws:
SARA Title III Section 313, Toxic Release: Conc. 1.0% / Threshold Standard
National regulations – Great Britain
Hazchem-Code: –
printed by Airtech Advanced Materials Group with Qualisys SUMDAT

SAFETY DATA SHEET
in accordance with 29 CFR 1910.1200 and ANSI standard Z400.1-2010
TMGP-4000, 4100, 4200
Material number 1058
Revision date: 9/4/2018
Version: 13
Language: en-US
Date of first version:5/24/2008
Page: 8 of 8
16. Other information
Text for labeling: Contains < 50 % Bisphenol-F-epichlorhydrine resin, < 25 % p-(2,3-Epoxypropoxy)-N,N-bis(2,3-epoxypropyl)aniline, < 25 % 4,4'-Diamino diphenyl sulfone, < 2 % Reaction product: Bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight <=700), < 2 % Monuron (ISO). Safety data sheet available on request. Hazard rating systems: 1 20 NFPA Hazard Rating: Health: 2 (Moderate) Fire: 1 (Slight) Reactivity: 0 (Minimal) HEALTH 2* FLAMMABILITY 1 PHYSICAL HAZARD 0 X HMIS Version III Rating: Health: 2 (Moderate) - Chronic effects Flammability: 1 (Slight) Physical Hazard: 0 (Minimal) Personal Protection: X = Consult your supervisor Reason of change: Changes in section 1: Company/undertaking identification Department issuing data sheet Contact person: see section 1: Dept. responsible for information This data sheet cannot cover all possible situations which the user may experience during processing. Each aspect of your operation should be examined to determine if, and which additional precautions may be necessary. All health and safety information contained in this data sheet should be provided to your employees and customers. It is your responsibility to develop appropriate workplace instructions and training programs for employees. As the conditions and methods of use are beyond our control, we do not assume any responsibility and expressly disclaim any liability for any use of this product. The information supplied on this safety data sheet complies with our current level of knowledge as well as with national and EU regulations. All statements or suggestions are made without warranty, expressed or implied, regarding accuracy of information, the hazards connected with the use of the product or the results to be obtained from the use thereof. printed by Airtech Advanced Materials Group with Qualisys SUMDAT

15TEF738_SDS.pdf

by | Sep 27, 2025

Revision date: 5/1/2015 Revision: 0
SAFETY DATA SHEET
HexForce F69 Finish
1. Identification
Product identifier
Product name HexForce F69 Finish
Product number 20872US-2
Synonyms; trade names Applicable to: E Glass or S Glass or Woven Aluminum Coated Fiberglass Fabric using E
Glass Fibers with a Silane Finish applied.
Recommended use of the chemical and restrictions on use
Application Formulated product for Aerospace, Industrial and Wind Energy applications
Details of the supplier of the safety data sheet
Supplier Hexcel Reinforcements
1913 N. King Street
Seguin
TX 78155
USA
Tel: ++ 830 379 1580
Fax: ++830 379 9544
Contact Person 11711 Dublin Blvd, Dublin, California, USA. ++925 551 4900
Emergency telephone number
Emergency telephone To be used only for advice on chemical emergencies, spillages, fires or First Aid:
For emergencies in US/Canada: CHEMTREC 800 424 9300
For emergencies in rest of the world: CARECHEM24 +44 (0) 1235 239 670
2. Hazard(s) identification
Classification of the substance or mixture
OSHA Regulatory Status This Product is Not Hazardous under the OSHA Hazard Communication Standard.
Physical hazards Combustible Dust – USH01
Health hazards Not Classified
Environmental hazards Not Classified
Label elements
Signal word Warning
Hazard statements USH01 May form combustible dust concentrations in air.
Other hazards
Warning! May cause temporary mechanical irritation of the eyes, skin or upper respiratory tract. The American Conference of
Governmental Industrial Hygienists (ACGIH) lists under synthetic vitreous fiber; continous filament glass fibers: 1 f/cc
(respirable) and 5 mg/m3 (inhalable). Warning! Dust generated from machining, grinding or sanding the product may be
combustible and could result in fire and/or explosion should the necessary dust concentration in air and ignition source be
present.
1/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Hazards not otherwise
classified (HNOC)
Fine dust clouds may form explosive mixtures with air.
3. Composition/information on ingredients
Mixtures
Fiberglass fiber, synthetic, vitreous, continuous filament 60-100%
CAS number: 65997-17-3
Classification
Not Classified
Aluminum (for the coating on the fiberglass fiber based on
the total fabric weight)
10-30%
CAS number: 7429-90-5
Classification
Not Classified
The full text for all hazard statements is displayed in Section 16.
Composition comments Continuous filament glass fiber (type E, R, D, S2) of silicon, aluminum, calcium, boron and
magnesium oxides in a vitreous amorphous state. Filament diameter r>3um CAS 65997-17-
3: >99% w/w
4. First-aid measures
Description of first aid measures
Inhalation With any sign of respiratory distress, affected persons should be taken into fresh air and made
to rest while medical attention is sought.
Ingestion If fiber from the product is ingested, immediately rinse mouth repeatedly with water. If
swallowing has occurred, do not induce vomiting. If requested, give affected person sips of
water. Seek medical attention.
Skin Contact In case of contact with the product or the cured product dust or particulates, immediately wash
skin with mild soap and water. Use a washcloth to help remove fibers. To avoid further
irritation, do not scratch irritated areas. Rubbing or scratching may force the fibers into the
skin. Get medical attention immediately if the irritation persists.
Eye contact Contamination by fiber should be removed by flushing with water for at least 15 minutes.
Seek medical attention if irritation persists.
Most important symptoms and effects, both acute and delayed
General information Filaments are mechanical irritants and may induce temporary mouth, nose and throat
irritation. Skin or eye contact may cause itching and temporary irritation. Ingestion may cause
temporary mechanical irritation of the digestive tract. Pre-existing conditions such as
respiratory or skin disorders may be aggravated by exposure to the product or dust/particulate
generated from machining/grinding of the cured product.
Indication of immediate medical attention and special treatment needed
Notes for the doctor No specific recommendations. If in doubt, get medical attention promptly.
5. Fire-fighting measures
Extinguishing media
2/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Suitable extinguishing mediaExtinguish with foam, carbon dioxide, dry powder or water fog.
Unsuitable extinguishing
media
Do not use water jet as an extinguisher, as this will spread the fire.
3/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Special hazards arising from the substance or mixture
Specific hazards If aluminum coated fiberglass (thorstrand) is used as the substrate, must be in accordance
with NFPA 651. Dust or particles from machining, grinding or sawing the product should no
be exposed to moisture as it may liberate hydrogen gas and form explosive air mixures.
Hazardous combustion
products
In an emergency situation leading to elevated temperature, there may be release of toxic
gases and vapours. The products of combustion and decomposition will depend on other
materials present in the fire and the actual conditions of the fire.
Advice for firefighters
Special protective equipment
for firefighters
Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
clothing.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Personal precautions Avoid contact with skin, eyes or clothing.
Environmental precautions
Environmental precautionsDue to the physical nature of this product, environmental release to drains and water courses
is not possible.
Methods and material for containment and cleaning up
Methods for cleaning up Clean up material and put into a suitable container and dispose of properly (See Section 13).
Reference to other sectionsFor personal protection, see Section 8. Collect and dispose of spillage as indicated in Section
13.
7. Handling and storage
Precautions for safe handling
Usage precautions Storage: Keep container tightly closed and dry.
Conditions for safe storage, including any incompatibilities
Storage precautions Store in tightly-closed, original container. Keep container dry.
Specific end uses(s)
Specific end use(s) As this product is an article, this section is not applicable.
4/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
8. Exposure Controls/personal protection
Control parameters
Occupational exposure limits
Long-term exposure limit (8-hour TWA): 1 f/cc 5 mg/m continuous filament glass fibers
Exposure controls
Protective equipment

Appropriate engineering
controls
Provide adequate ventilation.
Eye/face protection Eyewear complying with an approved standard should be worn if a risk assessment indicates
eye contact is possible.
Hand protection It is recommended that gloves are made of the following material: Polyvinyl chloride (PVC).
Rubber (natural, latex).
Other skin and body
protection
Wear appropriate clothing to prevent any possibility of skin contact.
Hygiene measures Wash hands at the end of each work shift and before eating, smoking and using the toilet.
Respiratory protection Wear a suitable dust mask.
9. Physical and Chemical Properties
Information on basic physical and chemical properties
Appearance White or aluminum coated fibers woven into fabric of varying weight and thickness, depending
on the style, with no distinctive odor.
Color White.
Odor No characteristic odor.
Odor threshold Not relevant due to the physical form of this product.
pH Not relevant due to the physical form of this product.
Melting point 700C / 1292F C 1220F / 660C Aluminum
Initial boiling point and rangeNot relevant due to the physical form of this product.
Flash point Not relevant due to the physical form of this product.
Evaporation rate Not relevant due to the physical form of this product.
Evaporation factor Not relevant due to the physical form of this product.
Upper/lower flammability or
explosive limits
Not relevant due to the physical form of this product.
Vapor pressure Not relevant due to the physical form of this product.
Vapor density Not relevant due to the physical form of this product.
Relative density Not relevant due to the physical form of this product.
Solubility(ies) Not relevant due to the physical form of this product.
5/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Auto-ignition temperatureNot relevant due to the physical form of this product.
Viscosity Not relevant due to the physical form of this product.
Explosive properties The mixture does not meet the criteria for explosive in accordance with GHS.
Explosive under the influence
of a flame
The mixture does not meet the criteria for explosive in accordance with GHS.
Oxidizing properties Does not meet the criteria for classification as oxidizing.
Comments The indicated values do not necessarily correspond to the product specification. Please refer
to the technical data sheet for specification data.
10. Stability and reactivity
Stability Stable at normal ambient temperatures and when used as recommended.
Possibility of hazardous
reactions
Not relevant.
Conditions to avoid Avoid heat, flames and other sources of ignition.
Materials to avoid For Thorstrand: Dilute hydrochloric acid, sulfuric acid, potassium hydroxide and sodium
hydroxide.
Hazardous decomposition
products
Does not decompose when used and stored as recommended. In an emergency situation
leading to elevated temperature, there may be release of toxic gases and vapors. The
products of combustion and decompostion will depend on other materials present in the fire
and the actual conditions of the fire.
11. Toxicological information
Information on toxicological effects
Toxicological effects Continuous filament fiber is listed by the International Agency for Research on Cancer (IARC)
as a group 3 (not classifiable as a human carcinogen).
Carcinogenicity
IARC carcinogenicity IARC Group 3 Not classifiable as to its carcinogenicity to humans.

Inhalation May cause respiratory system irritation.
Ingestion None expected under normal conditions of use. Ingestion is not an expected route of industrial
exposure.
Skin Contact Contact may cause mechanical irritation, skin redness, itching and drying of the skin.
Prolonged or repeated contact may cause allergic skin reaction, dermatitis and possible
sensitization.
Eye contact May cause mechanical irritation.
Medical considerations Preexisting eye, skin or respiratory disorders may be aggravated by exposure to this product.
12. Ecological Information
Ecotoxicity No ecological data has been determined on the total product.
Toxicity
Toxicity Not regarded as dangerous for the environment.
6/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Persistence and degradability
Persistence and degradabilityNot relevant due to the physical form of this product.
Bioaccumulative potential
Bio-Accumulative PotentialNot relevant due to the physical form of this product.
Mobility in soil
Mobility Not relevant due to the physical form of this product.
Results of PBT and vPvB assessment
Other adverse effects
13. Disposal considerations
Waste treatment methods
General information Materials for disposal should be placed in appropriate sealed containers to avoid potential
human and environmental exposure. It is the responsibility of the generator to comply with all
federal, state, provincial and local laws and regulations. We recommend that you contact an
appropriate waste disposal contractor and environmental agency for relevant laws and
regulations. Under the U.S., Resource Conservation and Recovery Act (RCRA), it is the
responsibility of the user of the product to determine at the time of disposal, whether the
product meets relevant waste classification and to assure proper disposal.
Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority.
14. Transport information
General Not regulated.
UN Number
This product is not dangerous to transport.
UN proper shipping name
This product is not dangerous to transport.
Transport hazard class(es)
This product is not dangerous to transport.
7/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Packing group
This product is not dangerous to transport.
Environmental hazards
Environmentally Hazardous Substance
No.
Special precautions for user
This product is not dangerous to transport.
15. Regulatory information
SNUR Not Applicable
International Regulations
US Federal Regulations
SARA Section 302 Extremely Hazardous Substances Tier II Threshold Planning Quantities
Not listed.
CERCLA/Superfund, Hazardous Substances/Reportable Quantities (EPA)
Not listed.
SARA Extremely Hazardous Substances EPCRA Reportable Quantities
Not listed.
SARA 313 Emission Reporting
Not listed
RCRA RCRA Information: Currently, the product is not listed in the federal hazardous waste
regulation 40 CFR, Part 261.33, paragraphs (E) or (F), ie. chemical products that are
considered hazardous if they become waste. State or local hazardous waste regulations may
also apply if they are different from the federal regulation. It is the responsibility of the user of
the product to determine at the time of disposal, whether the product meets relevant waste
classification and to assure proper disposal.
SARA (311/312) Hazard Categories
None.
US State Regulations
California Proposition 65 Carcinogens and Reproductive Toxins
This product contains no listed substances known to the State of California to cause cancer, birth
defects or other reproductive harm, at levels which would require a warning under the statute.
Inventories
US – TSCA
This product is an article as defined by TSCA and is not required to be listed in the TSCA inventory.
US – TSCA 12(b) Export Notification
Not listed.
8/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
16. Other information
Abbreviations and acronyms
used in the safety data sheet
ACGIH American Conference of Industrial Hygienists
ATE Acute Toxicity Estimate
CAS# Chemical Abstracts Service Number
CERCLA Comprehensive Environmental Response, Compensation, and Liability Act
DOT Department of Transportation
EmS Emergency Response Procedures for Ships Carrying Dangerous Goods
EPA Environmental Protection Agency
GHS Global Harmonized System
HMIS Hazardous Materials Identification System
IATA International Air Transport Association
ICAO International Civil Aviation Organization
IMDG International Maritime Dangerous Goods
Kow Octanol-water partition coefficient
LC50 Lethal concentration to 50% of a test population
LD50 Lethal dose to 50% of a test population
n.o.s. Not otherwise specified
OSHA Occupational Safety and Health Administration
PNEC Predicted No Effect Concentration
PPE Personal Protection Equipment
RCRA Resource Conservation and Recovery Act
SADT Self-accelerating decomposition temperature
SARA Superfund Admendments and Reauthorization Act
STOT Specific Target Organ Toxicity
(STOT) RE Repeated Exposure
(STOT) SE Single Exposure
TSCA Toxic Substance Control Act
UN United Nations
VOC Volatile Organic Compound
WHMIS Workplace Hazardous Materials Information System
General information Handling practices for aluminum materials must be in accordance with NFPA 651, Chapters
1-5. Dust or particulate from machining the product should not be exposed to moisture as it
may liberate hydrogen gas and form explosive mixtures.
Issued by U.S.A. Product Safety Department
Revision date 5/1/2015
Revision 0
Hazard statements in fullUSH01 May form combustible dust concentrations in air.
ACA HMIS Health rating. Slight hazard. (1)
ACA HMIS Flammability
rating.
Will not burn. (0)
ACA HMIS Physical hazard
rating.
Normally stable. (0)
ACA HMIS Personal
protection rating.
F
9/10

Revision date: 5/1/2015 Revision: 0
HexForce F69 Finish
Wherever such words or phrases as “hazardous,” “toxic,” “carcinogen,” etc. appear herein, they are used as a defined or
described under state employee right-to-know laws, Federal OSHA laws or the direct sources for these lawssuch as the
International Agency for Research on Cancer (IARC), the National Toxicology Program (NTP), etc. The use of such words or
phrases should not be taken to mean that we deem or imply any substance or exposure to be toxic, hazardous or otherwise
harmful. Any exposure can only be understood within the entire context of its occurrence, which includes such factors as the
substance’s characteristics as defined in the SDS, amount and duration of exposures, other chemicals present and
preexistingindividual differences in response to the exposure. The data provided in this SDS is based on the information
received from our raw material suppliers and other sources believed to be reliable. We are supplying you this data solely in
compliance with the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200 and the Federal and State laws as
described in Section 15: Regulatory Information. The information contained in this SDS is proprietary and confidential to
HexcelCorporation. This SDS and the information in it are not to be used for purposes other than compliance with the
Federal OSHA Hazard Communication Standard. If you have received this SDS from any other source than Hexcel
Corporation or its authorized agent, the information contained in it may have been modified from the original document and it
may not be the most current revision. Liability, if any, for use of this product is limited to the terms contained in our sale terms
and conditions. We do not in any way warrant (expressed or implied, including any implied warranty for merchantability or
fitness for a particular purpose) the data contained or the product described in this SDS. Additionally, we do not warrant that
the product will not infringe any patent or other proprietary or property rights of others.
10/10

15T3003K60_SDS.pdf

by | Sep 27, 2025

15T3003K50_SDS.pdf

by | Sep 27, 2025