by | Sep 27, 2025
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/18/2020
08/18/2020EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :CLEAR HI-GLOSS ADDITIVECAS-No. :mixtureProduct code :904-001Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 2
H225 Highly flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Carcinogenicity, Category
2
H351 Suspected of causing cancer.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :Danger
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)2/12Hazard statements (GHS US) :H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe vapours, mist, dust.
P261 – Avoid breathing spray.
P264 – Wash exposed area. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see none listed. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationstyrene, inhibited(CAS-No.) 100-42-5<= 36Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)3/12
Name
Product identifier % GHS-US classificationmethyl ethyl ketone(CAS-No.) 78-93-3<= 18Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.9Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Allow
affected person to breathe fresh air. Allow the victim to rest.
First-aid measures after skin contact :Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label). Rinse skin with water/shower. Take off
immediately all contaminated clothing.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)4/12
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapour. No open flames. No smoking. Use only outdoors or in a well-ventilated area. Avoid
breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not
handle until all safety precautions have been read and understood. Do not breathe
dust/fume/gas/mist/vapours/spray. Eliminate all ignition sources if safe to do so. Keep away
from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Ground/bond container and receiving equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Flammable vapours may accumulate in the
container. Use explosion-proof equipment. Wear personal protective equipment.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Use explosion-proof
electrical, ventilating and lighting equipment. equipment. Ground/bond container and receiving
equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Store in a well-ventilated place. Keep cool. Keep
container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmcobalt(II) 2-ethylhexanoate (136-52-7)Not applicable methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)300 ppm
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)5/12
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Colour :clear
Odour :characteristic
Odour threshold :No data available
pH :No data available
Melting point :>= C
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= 7 – 10 C
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapour.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :<=
Density :<= 1.05Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)6/12
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below. Highly flammable liquid and vapour.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. May form flammable/explosive
vapour-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of
ignition.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweightmethyl ethyl ketone (78-93-3)LD50 oral rat2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit> 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral)2193 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogen
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)7/12cobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.STOT-single exposure :May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.methyl ethyl ketone (78-93-3)STOT-single exposureMay cause drowsiness or dizziness.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
methyl ethyl ketone (78-93-3)LC50 fish 12993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae)1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)8/12
12.2.Persistence and degradabilityCLEAR HI-GLOSS ADDITIVE (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
12.3.Bioaccumulative potential
CLEAR HI-GLOSS ADDITIVE (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)methyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log Koc1.53 (log Koc, Calculated value)Ecology - soilHighly mobile in soil. Slightly harmful to plants.
12.5.Other adverse effects
Other information :Avoid release to the environment.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)9/12
SECTION 13: Disposal considerations
13.1.Disposal methods
Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN1866 Resin solution, 3, II UN-No.(DOT) :UN1866 Proper Shipping Name (DOT) :Resin solution Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) :173 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
383 - Packages containing toy plastic or paper caps for toy pistols described as UN0349,
Articles, explosive, n.o.s. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the
subpart E (labeling) requirements of this part when offered for transportation by motor vehicle,
rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned
in 173.62 of this subchapter, in conformance with the following conditions:
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx):150 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:5 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:60 L DOT Vessel Stowage Location :B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number :127 Other information :No supplementary information available.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)10/12
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 1866 RESIN SOLUTION, 3, IIUN-No. (IMDG) :1866Proper Shipping Name (IMDG) :RESIN SOLUTIONClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1866 Resin solution, 3, IIUN-No. (IATA) :1866Proper Shipping Name (IATA) :Resin solutionClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventorymethyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ5000 lb
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)11/12styrene, inhibited (100-42-5)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
YesNoNoNo27 g/dayComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/18/2020Data sources :REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information :None.
Full text of H-statements:H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H332Harmful if inhaled.H335May cause respiratory irritation.H336May cause drowsiness or dizziness.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH411Toxic to aquatic life with long lasting effects.
NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)12/12Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/18/2020
08/18/2020EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :CLEAR HI-GLOSS ADDITIVECAS-No. :mixtureProduct code :904-001Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 2
H225 Highly flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Carcinogenicity, Category
2
H351 Suspected of causing cancer.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :Danger
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)2/12Hazard statements (GHS US) :H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe vapours, mist, dust.
P261 – Avoid breathing spray.
P264 – Wash exposed area. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see none listed. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationstyrene, inhibited(CAS-No.) 100-42-5<= 36Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)3/12
Name
Product identifier % GHS-US classificationmethyl ethyl ketone(CAS-No.) 78-93-3<= 18Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.9Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Allow
affected person to breathe fresh air. Allow the victim to rest.
First-aid measures after skin contact :Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label). Rinse skin with water/shower. Take off
immediately all contaminated clothing.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)4/12
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapour. No open flames. No smoking. Use only outdoors or in a well-ventilated area. Avoid
breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not
handle until all safety precautions have been read and understood. Do not breathe
dust/fume/gas/mist/vapours/spray. Eliminate all ignition sources if safe to do so. Keep away
from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Ground/bond container and receiving equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Flammable vapours may accumulate in the
container. Use explosion-proof equipment. Wear personal protective equipment.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Use explosion-proof
electrical, ventilating and lighting equipment. equipment. Ground/bond container and receiving
equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Store in a well-ventilated place. Keep cool. Keep
container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmcobalt(II) 2-ethylhexanoate (136-52-7)Not applicable methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)300 ppm
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)5/12
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Colour :clear
Odour :characteristic
Odour threshold :No data available
pH :No data available
Melting point :>= C
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= 7 – 10 C
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapour.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :<=
Density :<= 1.05Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)6/12
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below. Highly flammable liquid and vapour.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. May form flammable/explosive
vapour-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of
ignition.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweightmethyl ethyl ketone (78-93-3)LD50 oral rat2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit> 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral)2193 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogen
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)7/12cobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.STOT-single exposure :May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.methyl ethyl ketone (78-93-3)STOT-single exposureMay cause drowsiness or dizziness.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
methyl ethyl ketone (78-93-3)LC50 fish 12993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae)1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)8/12
12.2.Persistence and degradabilityCLEAR HI-GLOSS ADDITIVE (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
12.3.Bioaccumulative potential
CLEAR HI-GLOSS ADDITIVE (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)methyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log Koc1.53 (log Koc, Calculated value)Ecology - soilHighly mobile in soil. Slightly harmful to plants.
12.5.Other adverse effects
Other information :Avoid release to the environment.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)9/12
SECTION 13: Disposal considerations
13.1.Disposal methods
Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN1866 Resin solution, 3, II UN-No.(DOT) :UN1866 Proper Shipping Name (DOT) :Resin solution Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) :173 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
383 - Packages containing toy plastic or paper caps for toy pistols described as UN0349,
Articles, explosive, n.o.s. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the
subpart E (labeling) requirements of this part when offered for transportation by motor vehicle,
rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned
in 173.62 of this subchapter, in conformance with the following conditions:
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx):150 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:5 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:60 L DOT Vessel Stowage Location :B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number :127 Other information :No supplementary information available.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)10/12
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 1866 RESIN SOLUTION, 3, IIUN-No. (IMDG) :1866Proper Shipping Name (IMDG) :RESIN SOLUTIONClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1866 Resin solution, 3, IIUN-No. (IATA) :1866Proper Shipping Name (IATA) :Resin solutionClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventorymethyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ5000 lb
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)11/12styrene, inhibited (100-42-5)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
YesNoNoNo27 g/dayComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/18/2020Data sources :REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information :None.
Full text of H-statements:H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H332Harmful if inhaled.H335May cause respiratory irritation.H336May cause drowsiness or dizziness.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH411Toxic to aquatic life with long lasting effects.
NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)12/12Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/18/2020
08/18/2020EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :CLEAR HI-GLOSS ADDITIVECAS-No. :mixtureProduct code :904-001Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 2
H225 Highly flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Carcinogenicity, Category
2
H351 Suspected of causing cancer.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :Danger
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)2/12Hazard statements (GHS US) :H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe vapours, mist, dust.
P261 – Avoid breathing spray.
P264 – Wash exposed area. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see none listed. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationstyrene, inhibited(CAS-No.) 100-42-5<= 36Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)3/12
Name
Product identifier % GHS-US classificationmethyl ethyl ketone(CAS-No.) 78-93-3<= 18Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.9Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Allow
affected person to breathe fresh air. Allow the victim to rest.
First-aid measures after skin contact :Wash with plenty of water/ . Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label). Rinse skin with water/shower. Take off
immediately all contaminated clothing.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)4/12
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapour. No open flames. No smoking. Use only outdoors or in a well-ventilated area. Avoid
breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions before use. Do not
handle until all safety precautions have been read and understood. Do not breathe
dust/fume/gas/mist/vapours/spray. Eliminate all ignition sources if safe to do so. Keep away
from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Ground/bond container and receiving equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Flammable vapours may accumulate in the
container. Use explosion-proof equipment. Wear personal protective equipment.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Use explosion-proof
electrical, ventilating and lighting equipment. equipment. Ground/bond container and receiving
equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Store in a well-ventilated place. Keep cool. Keep
container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmcobalt(II) 2-ethylhexanoate (136-52-7)Not applicable methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)300 ppm
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)5/12
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Colour :clear
Odour :characteristic
Odour threshold :No data available
pH :No data available
Melting point :>= C
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= 7 – 10 C
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapour.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :<=
Density :<= 1.05Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)6/12
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below. Highly flammable liquid and vapour.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. May form flammable/explosive
vapour-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of
ignition.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classifiedAcute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweightmethyl ethyl ketone (78-93-3)LD50 oral rat2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit> 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral)2193 mg/kg bodyweightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogen
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)7/12cobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.STOT-single exposure :May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.methyl ethyl ketone (78-93-3)STOT-single exposureMay cause drowsiness or dizziness.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled.Symptoms/effects :Suspected of damaging fertility or the unborn child. Causes damage to organs through
prolonged or repeated exposure. May cause genetic defects. Causes damage to organs.
Symptoms/effects after inhalation :May cause respiratory irritation. Danger of serious damage to health by prolonged exposure
through inhalation. Harmful if inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
methyl ethyl ketone (78-93-3)LC50 fish 12993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae)1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)8/12
12.2.Persistence and degradabilityCLEAR HI-GLOSS ADDITIVE (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
12.3.Bioaccumulative potential
CLEAR HI-GLOSS ADDITIVE (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)methyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log Koc1.53 (log Koc, Calculated value)Ecology - soilHighly mobile in soil. Slightly harmful to plants.
12.5.Other adverse effects
Other information :Avoid release to the environment.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)9/12
SECTION 13: Disposal considerations
13.1.Disposal methods
Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN1866 Resin solution, 3, II UN-No.(DOT) :UN1866 Proper Shipping Name (DOT) :Resin solution Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) :173 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
383 - Packages containing toy plastic or paper caps for toy pistols described as UN0349,
Articles, explosive, n.o.s. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the
subpart E (labeling) requirements of this part when offered for transportation by motor vehicle,
rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned
in 173.62 of this subchapter, in conformance with the following conditions:
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx):150 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:5 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:60 L DOT Vessel Stowage Location :B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number :127 Other information :No supplementary information available.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)10/12
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 1866 RESIN SOLUTION, 3, IIUN-No. (IMDG) :1866Proper Shipping Name (IMDG) :RESIN SOLUTIONClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1866 Resin solution, 3, IIUN-No. (IATA) :1866Proper Shipping Name (IATA) :Resin solutionClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventorymethyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ5000 lb
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)11/12styrene, inhibited (100-42-5)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
YesNoNoNo27 g/dayComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :08/18/2020Data sources :REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information :None.
Full text of H-statements:H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H332Harmful if inhaled.H335May cause respiratory irritation.H336May cause drowsiness or dizziness.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH411Toxic to aquatic life with long lasting effects.
NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
CLEAR HI-GLOSS ADDITIVE
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/18/2020EN (English)12/12Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/01/2016 Revision date: 10/31/2018
10/31/2018EN (English US)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixturesTrade name :BLACK PATTERN SURFACING COATINGCAS-No. :mixtureProduct code :902-046Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 2
H225 Highly flammable liquid and vaporSkin corrosion/irritation
Category 2
H315 Causes skin irritationSerious eye damage/eye
irritation Category 2A
H319 Causes serious eye irritationSkin sensitization, Category
1
H317 May cause an allergic skin reactionCarcinogenicity Category 2H351 Suspected of causing cancerReproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn childSpecific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritationSpecific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02GHS07GHS08
Signal word (GHS-US) :DangerHazard statements (GHS-US) :H225 – Highly flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)2/12 H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) :P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P362+P364 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)3/12NameProduct identifier%GHS-US classificationProprietary Resin(CAS-No.) TRADE SECRET<= 51Not classifiedstyrene, inhibited(CAS-No.) 100-42-5<= 35Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
methyl ethyl ketone(CAS-No.) 78-93-3<= 7Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
n-butyl acetate(CAS-No.) 123-86-4<= 1Flam. Liq. 3, H226
STOT SE 3, H336
Aquatic Acute 3, H402
1,6-hexanediol diacrylate(CAS-No.) 13048-33-4<= 1Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.5Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell.
First-aid measures after skin contact :Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapor.Explosion hazard :May form flammable/explosive vapor-air mixture.Reactivity :No reactivity hazard other than the effects described in sub-sections below.
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)4/12
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection.Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapors are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Eliminate all ignition sources if safe to do so. Do not breathe
dust/fume/gas/mist/vapors/spray.
Hygiene measures :Wash HANDS thoroughly after handling. Contaminated work clothing should not be allowed out
of the workplace. Wash contaminated clothing before reuse. Do not eat, drink or smoke when
using this product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
Proprietary Resin (TRADE SECRET)Not applicable
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)5/12methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppm (Methyl ethyl ketone (MEK); USA; Time-
weighted average exposure limit 8 h; TLV - Adopted
Value)
ACGIHACGIH STEL (ppm)300 ppm (Methyl ethyl ketone (MEK); USA; Short time
value; TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)Not applicablen-butyl acetate (123-86-4)ACGIHACGIH TWA (ppm)150 ppm (n-Butyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)200 ppm (n-Butyl acetate; USA; Short time value; TLV
- Adopted Value)
1,6-hexanediol diacrylate (13048-33-4)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective glovesEye protection:Chemical goggles or safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :Black
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= -6.67 C
Relative evaporation rate (butyl acetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor.
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :<=
Specific gravity / density :1.05
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)6/12Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)12 mg/l/4h (Rat; Literature study)LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000.000 mg/kg body weightATE US (dermal)2820.000 mg/kg body weightATE US (gases)2770.000 ppmV/4hATE US (vapors)12.000 mg/l/4hATE US (dust, mist)1.500 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129.000 mg/kg body weightn-butyl acetate (123-86-4)LD50 oral rat10770 mg/kg (Rat; Equivalent or similar to OECD 423; Experimental value; 12789 mg/kg; Rat;
Equivalent or similar to OECD 423; Experimental value; 10760 mg/kg bodyweight; Rat)
LD50 dermal rabbit> 17600 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >14112
mg/kg bodyweight; Rabbit)
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)7/12
n-butyl acetate (123-86-4)
ATE US (oral)10770.000 mg/kg body weight1,6-hexanediol diacrylate (13048-33-4)LD50 oral rat> 5000 mg/kg (Rat)LD50 dermal rabbit3600 mg/kg (Rabbit)ATE US (dermal)3600.000 mg/kg body weightSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitization :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) Status3 – Reasonably anticipated to be Human Carcinogencobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure:May cause respiratory irritation.Specific target organ toxicity repeated
exposure
:Causes damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedPotential Adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause an allergic skin reaction. May cause respiratory irritation.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
methyl ethyl ketone (78-93-3)EC50 Daphnia 1308 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
LC50 fish 22993 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Static
system; Fresh water; Experimental value)
cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
n-butyl acetate (123-86-4)LC50 fish 118 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)8/12
12.2.Persistence and degradabilityBLACK PATTERN SURFACING COATING (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityReadily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42Proprietary Resin (TRADE SECRET)Persistence and degradabilityNot established.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
BOD (% of ThOD)> 0.5 (5 days; Literature study)cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.n-butyl acetate (123-86-4)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Not established.Biochemical oxygen demand (BOD)
0.15 – 0.5 g O /g substance
Chemical oxygen demand (COD)
2.32 g O /g substance
ThOD
2.21 g O /g substance
1,6-hexanediol diacrylate (13048-33-4)Persistence and degradabilityInherently biodegradable.
12.3.Bioaccumulative potential
BLACK PATTERN SURFACING COATING (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (BCF)Log Pow2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Proprietary Resin (TRADE SECRET)Bioaccumulative potentialNot established.methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).n-butyl acetate (123-86-4)BCF fish 114 (BCF)Log Pow2.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 25
C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)9/121,6-hexanediol diacrylate (13048-33-4)Bioaccumulative potentialNo bioaccumulation data available.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (19 C)Log KocKoc,352; Estimated value; log Koc; 2.55; Estimated valuemethyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log KocKoc,34; Calculated valueEcology - soilSlightly harmful to plants.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)n-butyl acetate (123-86-4)Surface tension0.0613 N/m (20 C; 1 g/l)Log Koclog Koc,SRC PCKOCWIN v2.0; 1.268 - 1.844; QSAR
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.Other information :Avoid release to the environment.
SECTION 13: Disposal considerations
13.1.Disposal methods
Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapors are flammable.Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) :PAINTClass (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120Packing group (DOT) :II - Medium DangerHazard labels (DOT) :3 - Flammable liquidOther information :No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) :UN 1263 paint, 3, IIUN-No. (IMDG) :1263Proper Shipping Name (IMDG) :paintClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)10/12
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
Proprietary Resin (TRADE SECRET)Not listed on the United States TSCA (Toxic Substances Control Act) inventorymethyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporing requirements of the United States SARA Section 313
CERCLA RQ5000 lbcobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventoryn-butyl acetate (123-86-4)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporing requirements of the United States SARA Section 313
CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Delayed (chronic) health hazard
Fire hazard
1,6-hexanediol diacrylate (13048-33-4)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)Proprietary Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)n-butyl acetate (123-86-4)Listed on the Canadian DSL (Domestic Substances List)1,6-hexanediol diacrylate (13048-33-4)Listed on the Canadian DSL (Domestic Substances List)
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)11/12
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
YesNoNoNo0.1 g/daystyrene, inhibited (100-42-5)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone (78-93-3)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
n-butyl acetate (123-86-4)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Revision date :10/31/2018Other information :None.Full text of H-phrases:---
---
H225Highly flammable liquid and vapor---
---
H226Flammable liquid and vapor---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H332Harmful if inhaled---
---
H335May cause respiratory irritation---
---
H336May cause drowsiness or dizziness---
---
H351Suspected of causing cancer---
---
H361Suspected of damaging fertility or the unborn child---
---
H372Causes damage to organs through prolonged or repeated exposure---
---
H400Very toxic to aquatic life---
---
H402Harmful to aquatic life---
---
H411Toxic to aquatic life with long lasting effects
BLACK PATTERN SURFACING COATING
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
10/31/2018EN (English US)12/12NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 08/26/2019
08/26/2019 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : CRYSTAL CLEAR SEALER
CAS-No. : mixture
Product code : 823
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : WOOD SEALER
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS US classification
Flammable liquids Category 3 H226 Flammable liquid and vapour
Skin corrosion/irritation Category 2 H315 Causes skin irritation
Serious eye damage/eye irritation Category 2 H319 Causes serious eye irritation
Skin sensitization, Category 1 H317 May cause an allergic skin reaction
Reproductive toxicity Category 2 H361 Suspected of damaging fertility or the unborn child
Specific target organ toxicity (single exposure) Category 3 H335 May cause respiratory irritation
Specific target organ toxicity (repeated exposure) Category 1 H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic environment – Acute Hazard Category 2 H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labeling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Hazard statements (GHS US) : H226 – Flammable liquid and vapour
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H401 – Toxic to aquatic life
Precautionary statements (GHS US) : P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical/ventilating/lighting equipment
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 2/11
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust/fume/gas/mist/vapors/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 – If on skin: Wash with plenty of water
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center or doctor if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use media other than water to extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to hazardous or special waste collection point, in
accordance with local, regional, national and/or international regulation
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS US classification
styrene, inhibited
(CAS-No.) 100-42-5 <= 53 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
acetone
(CAS-No.) 67-64-1 <= 15 Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.8 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible).
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 3/11
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow affected person to
breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a
position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel
unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: Get medical advice/attention. Specific treatment (see supplemental first aid instruction
on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential Adverse human health effects and
symptoms
: Harmful if inhaled.
Symptoms/effects : May cause genetic defects. May cause cancer.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapour.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity in case of fire : No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 4/11
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapor. No open flames. No smoking. Use only non-
sparking tools. Use only outdoors or in a well-ventilated area. Avoid breathing
dust/fume/gas/mist/vapors/spray. Obtain special instructions before use. Do not handle until all
safety precautions have been read and understood. Eliminate all ignition sources if safe to do
so.
Hygiene measures : Wash hands, forearms and face thoroughly after handling. Do not eat, drink or smoke when
using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical/ventilating/lighting
equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : Keep in fireproof
place. Keep container tightly closed. Store in a well-ventilated place. Keep cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm
ACGIH ACGIH STEL (ppm) 40 ppm
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
acetone (67-64-1)
ACGIH ACGIH TWA (ppm) 250 ppm
ACGIH ACGIH STEL (ppm) 500 ppm
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves.
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 5/11
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : >= 56.1 C
Flash point : 3 – 5 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapour.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : <= 1
Solubility : No data available
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapour. May form flammable/explosive vapor-
air mixture.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) : Not classified
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Not classified
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 6/11
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat > 2000 mg/kg body weight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000 mg/kg body weight
ATE US (dermal) 5010 mg/kg body weight
ATE US (gases) 2770 ppmV/4h
ATE US (vapors) 11 mg/l/4h
ATE US (dust, mist) 1.5 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129 mg/kg body weight
acetone (67-64-1)
LD50 oral rat 5800 mg/kg (Equivalent or similar to OECD 401, Rat, Female, Experimental value, Oral)
LD50 dermal rabbit 20000 mg/kg (Equivalent or similar to OECD 402, Rabbit, Male, Experimental value, Dermal)
LC50 inhalation rat (mg/l) 76 mg/l (Other, 4 h, Rat, Female, Experimental value, Inhalation (vapours))
ATE US (oral) 5800 mg/kg body weight
ATE US (dermal) 20000 mg/kg body weight
ATE US (vapors) 76 mg/l/4h
ATE US (dust, mist) 76 mg/l/4h
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Not classified.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
STOT-single exposure : May cause respiratory irritation.
styrene, inhibited (100-42-5)
STOT-single exposure May cause respiratory irritation.
acetone (67-64-1)
STOT-single exposure May cause drowsiness or dizziness.
STOT-repeated exposure : Causes damage to organs through prolonged or repeated exposure.
styrene, inhibited (100-42-5)
STOT-repeated exposure Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
Potential Adverse human health effects and
symptoms
: Harmful if inhaled.
Symptoms/effects : May cause genetic defects. May cause cancer.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 7/11
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : The product is not considered harmful to aquatic organisms or to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)
LC50 fish 1 10 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 1 4.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae) 4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
acetone (67-64-1)
LC50 fish 1 5540 mg/l (EU Method C.1, 96 h, Salmo gairdneri, Static system, Fresh water, Experimental
value, Nominal concentration)
12.2. Persistence and degradability
CRYSTAL CLEAR SEALER (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42 (Literature study)
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
acetone (67-64-1)
Persistence and degradability Biodegradable in the soil. Biodegradable in the soil under anaerobic conditions. Readily
biodegradable in water.
Biochemical oxygen demand (BOD)
1.43 g O /g substance
Chemical oxygen demand (COD)
1.92 g O /g substance
ThOD
2.2 g O /g substance
BOD (% of ThOD) 0.872 (20 day(s), Literature study)
12.3. Bioaccumulative potential
CRYSTAL CLEAR SEALER (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus, Literature study)
Log Pow 2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 8/11
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
acetone (67-64-1)
BCF fish 1 0.69 (Pisces)
BCF other aquatic organisms 1 3 (BCFWIN, Calculated value)
Log Pow -0.24 (Test data)
Bioaccumulative potential Not bioaccumulative.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (20 C)
Log Koc 2.55 (log Koc, Estimated value)
Ecology - soil Low potential for adsorption in soil.
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
acetone (67-64-1)
Surface tension 0.0237 N/m
Ecology - soil No (test)data on mobility of the substance available.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation.
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transport document description : UN1866 Resin solution, 3, II
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : Resin solution
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : II - Medium Danger
Hazard labels (DOT) : 3 - Flammable liquid
DOT Packaging Non Bulk (49 CFR 173.xxx) : 173
DOT Packaging Bulk (49 CFR 173.xxx) : 242
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 9/11
DOT Special Provisions (49 CFR 172.102) : 149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packaging may be increased to
5 L (1.3 gallons).
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / 1 + a (tr - tf) Where: tr is the maximum mean bulk temperature
during transport, and tf is the temperature in degrees celsius of the liquid during filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx) : 150
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
: 5 L
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
: 60 L
DOT Vessel Stowage Location : B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number : 127
Other information : No supplementary information available.
Transportation of Dangerous Goods
Not applicable
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, II
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : II - substances presenting medium danger
Limited quantities (IMDG) : 5 L
Air transport
Transport document description (IATA) : UN 1866 Resin solution, 3, II
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : Resin solution
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 10/11
acetone (67-64-1)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
CERCLA RQ 5000 lb
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
acetone (67-64-1)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
Yes No No No 27 g/day
Component State or local regulations
styrene, inhibited(100-42-5) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
acetone(67-64-1) U.S. - New Jersey - Right to Know Hazardous Substance List; U.S. - Pennsylvania -
RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date : 08/26/2019
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information : None.
CRYSTAL CLEAR SEALER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
08/26/2019 EN (English US) 11/11
Full text of H-phrases:
H225 Highly flammable liquid and vapour
H226 Flammable liquid and vapour
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
H332 Harmful if inhaled
H335 May cause respiratory irritation
H336 May cause drowsiness or dizziness
H351 Suspected of causing cancer
H361 Suspected of damaging fertility or the unborn child
H372 Causes damage to organs through prolonged or repeated exposure
H400 Very toxic to aquatic life
H401 Toxic to aquatic life
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixturesTrade name :WHITE EZ SANDING PRIMERCAS-No. :mixtureProduct code :714-061Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 2
H225 Highly flammable liquid and vaporSkin corrosion/irritation
Category 2
H315 Causes skin irritationSerious eye damage/eye
irritation Category 2A
H319 Causes serious eye irritationCarcinogenicity Category 2H351 Suspected of causing cancerReproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn childSpecific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02GHS07GHS08
Signal word (GHS-US) :DangerHazard statements (GHS-US) :H225 – Highly flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) :P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)2/14 P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
P270 – Do not eat, drink or smoke when using this product
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P314 – Get medical advice/attention if you feel unwell
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationtalc(CAS-No.) 14807-96-6<= 35Not classifiedProprietary Resin(CAS-No.) TRADE SECRET<= 25Not classifiedstyrene, inhibited(CAS-No.) 100-42-5<= 18Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
titanium(IV) oxide(CAS-No.) 13463-67-7<= 10Carc. 2, H351methyl ethyl ketone(CAS-No.) 78-93-3<= 6Flam. Liq. 2, H225
STOT SE 3, H336
n-butyl acetate(CAS-No.) 123-86-4<= 6Flam. Liq. 3, H226
STOT SE 3, H336
solvent nr 5(CAS-No.) 64742-89-8<= 2Flam. Liq. 2, H225isobutyl acetate(CAS-No.) 110-19-0<= 1Flam. Liq. 2, H2252-propanol(CAS-No.) 67-63-0<= 1Flam. Liq. 2, H225
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.5Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)3/14First-aid measures after inhalation :Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact :Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label).
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapor.Explosion hazard :May form flammable/explosive vapor-air mixture.Reactivity :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection.Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)4/14
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapors are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Eliminate all ignition sources if safe to do so. Do not breathe
dust/fume/gas/mist/vapors/spray.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
Proprietary Resin (TRADE SECRET)Not applicablemethyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppm (Methyl ethyl ketone (MEK); USA; Time-
weighted average exposure limit 8 h; TLV - Adopted
Value)
ACGIHACGIH STEL (ppm)300 ppm (Methyl ethyl ketone (MEK); USA; Short time
value; TLV - Adopted Value)
talc (14807-96-6)ACGIHACGIH TWA (mg/m )2 mg/m (Talc (containing no asbestos fibers); USA;
Time-weighted average exposure limit 8 h; TLV -
Adopted Value; Respirable fraction. The value is for
particulate matter containing no asbestos and < 1%
crystalline silica; Talc (containing asbestos fibers); 0.1
fibers/cm ; USA; Time-weighted average exposure
limit 8 h; TLV - Adopted Value; Respirable fibers:
length > 5 m; aspect ratio 3:1, as determined by the
membrane filter method at 400-450X magnification (4-
mm objective), using phase-contrast illumination)
cobalt(II) 2-ethylhexanoate (136-52-7)Not applicablen-butyl acetate (123-86-4)ACGIHACGIH TWA (ppm)150 ppm (n-Butyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)200 ppm (n-Butyl acetate; USA; Short time value; TLV
– Adopted Value)
isobutyl acetate (110-19-0)ACGIHACGIH TWA (ppm)150 ppm (Isobutyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)5/142-propanol (67-63-0)ACGIHACGIH TWA (ppm)200 ppm (2-propanol; USA; Time-weighted average
exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)400 ppm (2-propanol; USA; Short time value; TLV –
Adopted Value)
titanium(IV) oxide (13463-67-7)ACGIHACGIH TWA (mg/m )10 mg/m (Titanium dioxide; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
solvent nr 5 (64742-89-8)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective glovesEye protection:Chemical goggles or safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :off white
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= -11.1 C
Relative evaporation rate (butyl acetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor.
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :<=
Specific gravity / density :1.42Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)6/14Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)12 mg/l/4h (Rat; Literature study)LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000.000 mg/kg body weightATE US (dermal)2820.000 mg/kg body weightATE US (gases)2770.000 ppmV/4hATE US (vapors)12.000 mg/l/4hATE US (dust, mist)1.500 mg/l/4hmethyl ethyl ketone (78-93-3)ATE US (oral)2737.000 mg/kg body weightATE US (dermal)6480.000 mg/kg body weightATE US (gases)11300.000 ppmV/4hATE US (vapors)34.000 mg/l/4hATE US (dust, mist)34.000 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129.000 mg/kg body weightn-butyl acetate (123-86-4)LD50 oral rat10770 mg/kg (Rat; Equivalent or similar to OECD 423; Experimental value; 12789 mg/kg; Rat;
Equivalent or similar to OECD 423; Experimental value; 10760 mg/kg bodyweight; Rat)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)7/14
n-butyl acetate (123-86-4)
LD50 dermal rabbit> 17600 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >14112
mg/kg bodyweight; Rabbit)
ATE US (oral)10770.000 mg/kg body weightisobutyl acetate (110-19-0)LD50 oral rat13400 mg/kg (Rat)LD50 dermal rabbit> 5000 mg/kg (Rabbit)ATE US (oral)13400.000 mg/kg body weight2-propanol (67-63-0)LD50 dermal rabbit12870 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; 16.4; Rabbit)LC50 inhalation rat (mg/l)73 mg/l/4h (Rat)ATE US (oral)5045.000 mg/kg body weightATE US (dermal)12870.000 mg/kg body weightATE US (vapors)73.000 mg/l/4hATE US (dust, mist)73.000 mg/l/4htitanium(IV) oxide (13463-67-7)LD50 oral rat> 10000 mg/kg (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure; Experimental
value; > 5000 mg/kg bodyweight; Rat; Experimental value)
LD50 dermal rabbit> 10000 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)> 6.8 mg/l/4h (Rat; Experimental value)solvent nr 5 (64742-89-8)LD50 oral rat> 10000 mg/kg (Rat)LD50 dermal rabbit18000 mg/kg (Rabbit)LC50 inhalation rat (mg/l)301 mg/l/4h (Rat)ATE US (dermal)18000.000 mg/kg body weightATE US (vapors)301.000 mg/l/4hATE US (dust, mist)301.000 mg/l/4hSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitization :Not classifiedGerm cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) Status3 – Reasonably anticipated to be Human Carcinogentalc (14807-96-6)IARC group3 – Not classifiablecobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humans2-propanol (67-63-0)IARC group3 – Not classifiabletitanium(IV) oxide (13463-67-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure:Not classifiedSpecific target organ toxicity repeated
exposure
:Causes damage to organs through prolonged or repeated exposure.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)8/14Aspiration hazard :Not classifiedPotential Adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
methyl ethyl ketone (78-93-3)EC50 Daphnia 1308 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
LC50 fish 22993 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Static
system; Fresh water; Experimental value)
talc (14807-96-6)LC50 fish 1> 100 g/l (LC50; 24 h; Brachydanio rerio)cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
n-butyl acetate (123-86-4)LC50 fish 118 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
isobutyl acetate (110-19-0)LC50 fish 1100 mg/l (LC50; 96 h)EC50 Daphnia 2146 – 192 mg/l (EC50; 48 h)2-propanol (67-63-0)LC50 fish 29640 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
EC50 Daphnia 213299 mg/l (EC50; Other; 48 h; Daphnia magna)Threshold limit algae 1> 1000 mg/l (EC50; UBA; 72 h; Scenedesmus subspicatus)titanium(IV) oxide (13463-67-7)EC50 Daphnia 1> 100 mg/l (LC50; Equivalent or similar to OECD 202; 48 h; Daphnia magna; Static system;
Fresh water; Weight of evidence)
Threshold limit algae 161 mg/l (EC50; Other; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water;
Experimental value)
12.2.Persistence and degradability
WHITE EZ SANDING PRIMER (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityReadily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)9/14Proprietary Resin (TRADE SECRET)Persistence and degradabilityNot established.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
BOD (% of ThOD)> 0.5 (5 days; Literature study)talc (14807-96-6)Persistence and degradabilityBiodegradability: not applicable.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.n-butyl acetate (123-86-4)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Not established.Biochemical oxygen demand (BOD)
0.15 – 0.5 g O /g substance
Chemical oxygen demand (COD)
2.32 g O /g substance
ThOD
2.21 g O /g substance
isobutyl acetate (110-19-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Photolysis in the air. Not
established.
ThOD
2.2 g O /g substance
BOD (% of ThOD)0.62-propanol (67-63-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. No (test)data on mobility of the substance available. Not established.
Biochemical oxygen demand (BOD)
1.19 g O /g substance
Chemical oxygen demand (COD)
2.23 g O /g substance
ThOD
2.4 g O /g substance
titanium(IV) oxide (13463-67-7)Persistence and degradabilityBiodegradability: not applicable. Low potential for mobility in soil.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
solvent nr 5 (64742-89-8)Persistence and degradabilityBiodegradability in soil: no data available. No (test)data on mobility of the components
available.
12.3.Bioaccumulative potential
WHITE EZ SANDING PRIMER (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (BCF)Log Pow2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)10/14
styrene, inhibited (100-42-5)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Proprietary Resin (TRADE SECRET)Bioaccumulative potentialNot established.methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).n-butyl acetate (123-86-4)BCF fish 114 (BCF)Log Pow2.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 25
C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.isobutyl acetate (110-19-0)BCF fish 14 - 9.7 (BCF)Log Pow1.59 - 1.78Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.2-propanol (67-63-0)Log Pow0.05 (Weight of evidence approach; Other; 25 C)Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.titanium(IV) oxide (13463-67-7)Bioaccumulative potentialNot bioaccumulative.solvent nr 5 (64742-89-8)Bioaccumulative potentialNo bioaccumulation data available.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (19 C)Log KocKoc,352; Estimated value; log Koc; 2.55; Estimated valuemethyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log KocKoc,34; Calculated valueEcology - soilSlightly harmful to plants.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)n-butyl acetate (123-86-4)Surface tension0.0613 N/m (20 C; 1 g/l)Log Koclog Koc,SRC PCKOCWIN v2.0; 1.268 - 1.844; QSARisobutyl acetate (110-19-0)Surface tension0.024 N/m (20 C)2-propanol (67-63-0)Surface tension0.021 N/m (25 C)
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.Other information :Avoid release to the environment.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)11/14
SECTION 13: Disposal considerations
13.1.Disposal methods
Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapors are flammable.Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) :PAINTClass (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120Packing group (DOT) :II - Medium DangerHazard labels (DOT) :3 - Flammable liquidOther information :No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) :UN 1263 paint, 3, IIUN-No. (IMDG) :1263Proper Shipping Name (IMDG) :paintClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
Proprietary Resin (TRADE SECRET)Not listed on the United States TSCA (Toxic Substances Control Act) inventory
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)12/14methyl ethyl ketone (78-93-3)CERCLA RQ5000 lbtalc (14807-96-6)Listed on the United States TSCA (Toxic Substances Control Act) inventorycobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventoryn-butyl acetate (123-86-4)CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Delayed (chronic) health hazard
Fire hazard
titanium(IV) oxide (13463-67-7)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)Proprietary Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)talc (14807-96-6)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)titanium(IV) oxide (13463-67-7)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
titanium(IV) oxide (13463-67-7)Listed on IARC (International Agency for Research on Cancer)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
YesNoNoNo0.1 g/day
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)13/14styrene, inhibited (100-42-5)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
talc (14807-96-6)U.S. - New Jersey - Right to Know Hazardous Substance Listtitanium(IV) oxide (13463-67-7)U.S. - New Jersey - Right to Know Hazardous Substance List
SECTION 16: Other information
Other information :None.Full text of H-phrases:---
---
H225Highly flammable liquid and vapor---
---
H226Flammable liquid and vapor---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H332Harmful if inhaled---
---
H335May cause respiratory irritation---
---
H336May cause drowsiness or dizziness---
---
H351Suspected of causing cancer---
---
H361Suspected of damaging fertility or the unborn child---
---
H372Causes damage to organs through prolonged or repeated exposure---
---
H400Very toxic to aquatic life---
---
H411Toxic to aquatic life with long lasting effectsNFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)14/14
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixturesTrade name :WHITE EZ SANDING PRIMERCAS-No. :mixtureProduct code :714-061Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 2
H225 Highly flammable liquid and vaporSkin corrosion/irritation
Category 2
H315 Causes skin irritationSerious eye damage/eye
irritation Category 2A
H319 Causes serious eye irritationCarcinogenicity Category 2H351 Suspected of causing cancerReproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn childSpecific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02GHS07GHS08
Signal word (GHS-US) :DangerHazard statements (GHS-US) :H225 – Highly flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) :P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)2/14 P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
P270 – Do not eat, drink or smoke when using this product
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P314 – Get medical advice/attention if you feel unwell
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationtalc(CAS-No.) 14807-96-6<= 35Not classifiedProprietary Resin(CAS-No.) TRADE SECRET<= 25Not classifiedstyrene, inhibited(CAS-No.) 100-42-5<= 18Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
titanium(IV) oxide(CAS-No.) 13463-67-7<= 10Carc. 2, H351methyl ethyl ketone(CAS-No.) 78-93-3<= 6Flam. Liq. 2, H225
STOT SE 3, H336
n-butyl acetate(CAS-No.) 123-86-4<= 6Flam. Liq. 3, H226
STOT SE 3, H336
solvent nr 5(CAS-No.) 64742-89-8<= 2Flam. Liq. 2, H225isobutyl acetate(CAS-No.) 110-19-0<= 1Flam. Liq. 2, H2252-propanol(CAS-No.) 67-63-0<= 1Flam. Liq. 2, H225
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.5Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)3/14First-aid measures after inhalation :Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact :Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label).
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapor.Explosion hazard :May form flammable/explosive vapor-air mixture.Reactivity :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection.Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)4/14
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapors are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Eliminate all ignition sources if safe to do so. Do not breathe
dust/fume/gas/mist/vapors/spray.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
Proprietary Resin (TRADE SECRET)Not applicablemethyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppm (Methyl ethyl ketone (MEK); USA; Time-
weighted average exposure limit 8 h; TLV - Adopted
Value)
ACGIHACGIH STEL (ppm)300 ppm (Methyl ethyl ketone (MEK); USA; Short time
value; TLV - Adopted Value)
talc (14807-96-6)ACGIHACGIH TWA (mg/m )2 mg/m (Talc (containing no asbestos fibers); USA;
Time-weighted average exposure limit 8 h; TLV -
Adopted Value; Respirable fraction. The value is for
particulate matter containing no asbestos and < 1%
crystalline silica; Talc (containing asbestos fibers); 0.1
fibers/cm ; USA; Time-weighted average exposure
limit 8 h; TLV - Adopted Value; Respirable fibers:
length > 5 m; aspect ratio 3:1, as determined by the
membrane filter method at 400-450X magnification (4-
mm objective), using phase-contrast illumination)
cobalt(II) 2-ethylhexanoate (136-52-7)Not applicablen-butyl acetate (123-86-4)ACGIHACGIH TWA (ppm)150 ppm (n-Butyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)200 ppm (n-Butyl acetate; USA; Short time value; TLV
– Adopted Value)
isobutyl acetate (110-19-0)ACGIHACGIH TWA (ppm)150 ppm (Isobutyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)5/142-propanol (67-63-0)ACGIHACGIH TWA (ppm)200 ppm (2-propanol; USA; Time-weighted average
exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)400 ppm (2-propanol; USA; Short time value; TLV –
Adopted Value)
titanium(IV) oxide (13463-67-7)ACGIHACGIH TWA (mg/m )10 mg/m (Titanium dioxide; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
solvent nr 5 (64742-89-8)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective glovesEye protection:Chemical goggles or safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :off white
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= -11.1 C
Relative evaporation rate (butyl acetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor.
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :<=
Specific gravity / density :1.42Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)6/14Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)12 mg/l/4h (Rat; Literature study)LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000.000 mg/kg body weightATE US (dermal)2820.000 mg/kg body weightATE US (gases)2770.000 ppmV/4hATE US (vapors)12.000 mg/l/4hATE US (dust, mist)1.500 mg/l/4hmethyl ethyl ketone (78-93-3)ATE US (oral)2737.000 mg/kg body weightATE US (dermal)6480.000 mg/kg body weightATE US (gases)11300.000 ppmV/4hATE US (vapors)34.000 mg/l/4hATE US (dust, mist)34.000 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129.000 mg/kg body weightn-butyl acetate (123-86-4)LD50 oral rat10770 mg/kg (Rat; Equivalent or similar to OECD 423; Experimental value; 12789 mg/kg; Rat;
Equivalent or similar to OECD 423; Experimental value; 10760 mg/kg bodyweight; Rat)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)7/14
n-butyl acetate (123-86-4)
LD50 dermal rabbit> 17600 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >14112
mg/kg bodyweight; Rabbit)
ATE US (oral)10770.000 mg/kg body weightisobutyl acetate (110-19-0)LD50 oral rat13400 mg/kg (Rat)LD50 dermal rabbit> 5000 mg/kg (Rabbit)ATE US (oral)13400.000 mg/kg body weight2-propanol (67-63-0)LD50 dermal rabbit12870 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; 16.4; Rabbit)LC50 inhalation rat (mg/l)73 mg/l/4h (Rat)ATE US (oral)5045.000 mg/kg body weightATE US (dermal)12870.000 mg/kg body weightATE US (vapors)73.000 mg/l/4hATE US (dust, mist)73.000 mg/l/4htitanium(IV) oxide (13463-67-7)LD50 oral rat> 10000 mg/kg (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure; Experimental
value; > 5000 mg/kg bodyweight; Rat; Experimental value)
LD50 dermal rabbit> 10000 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)> 6.8 mg/l/4h (Rat; Experimental value)solvent nr 5 (64742-89-8)LD50 oral rat> 10000 mg/kg (Rat)LD50 dermal rabbit18000 mg/kg (Rabbit)LC50 inhalation rat (mg/l)301 mg/l/4h (Rat)ATE US (dermal)18000.000 mg/kg body weightATE US (vapors)301.000 mg/l/4hATE US (dust, mist)301.000 mg/l/4hSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitization :Not classifiedGerm cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) Status3 – Reasonably anticipated to be Human Carcinogentalc (14807-96-6)IARC group3 – Not classifiablecobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humans2-propanol (67-63-0)IARC group3 – Not classifiabletitanium(IV) oxide (13463-67-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure:Not classifiedSpecific target organ toxicity repeated
exposure
:Causes damage to organs through prolonged or repeated exposure.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)8/14Aspiration hazard :Not classifiedPotential Adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
methyl ethyl ketone (78-93-3)EC50 Daphnia 1308 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
LC50 fish 22993 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Static
system; Fresh water; Experimental value)
talc (14807-96-6)LC50 fish 1> 100 g/l (LC50; 24 h; Brachydanio rerio)cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
n-butyl acetate (123-86-4)LC50 fish 118 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
isobutyl acetate (110-19-0)LC50 fish 1100 mg/l (LC50; 96 h)EC50 Daphnia 2146 – 192 mg/l (EC50; 48 h)2-propanol (67-63-0)LC50 fish 29640 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
EC50 Daphnia 213299 mg/l (EC50; Other; 48 h; Daphnia magna)Threshold limit algae 1> 1000 mg/l (EC50; UBA; 72 h; Scenedesmus subspicatus)titanium(IV) oxide (13463-67-7)EC50 Daphnia 1> 100 mg/l (LC50; Equivalent or similar to OECD 202; 48 h; Daphnia magna; Static system;
Fresh water; Weight of evidence)
Threshold limit algae 161 mg/l (EC50; Other; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water;
Experimental value)
12.2.Persistence and degradability
WHITE EZ SANDING PRIMER (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityReadily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)9/14Proprietary Resin (TRADE SECRET)Persistence and degradabilityNot established.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
BOD (% of ThOD)> 0.5 (5 days; Literature study)talc (14807-96-6)Persistence and degradabilityBiodegradability: not applicable.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.n-butyl acetate (123-86-4)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Not established.Biochemical oxygen demand (BOD)
0.15 – 0.5 g O /g substance
Chemical oxygen demand (COD)
2.32 g O /g substance
ThOD
2.21 g O /g substance
isobutyl acetate (110-19-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Photolysis in the air. Not
established.
ThOD
2.2 g O /g substance
BOD (% of ThOD)0.62-propanol (67-63-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. No (test)data on mobility of the substance available. Not established.
Biochemical oxygen demand (BOD)
1.19 g O /g substance
Chemical oxygen demand (COD)
2.23 g O /g substance
ThOD
2.4 g O /g substance
titanium(IV) oxide (13463-67-7)Persistence and degradabilityBiodegradability: not applicable. Low potential for mobility in soil.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
solvent nr 5 (64742-89-8)Persistence and degradabilityBiodegradability in soil: no data available. No (test)data on mobility of the components
available.
12.3.Bioaccumulative potential
WHITE EZ SANDING PRIMER (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (BCF)Log Pow2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)10/14
styrene, inhibited (100-42-5)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Proprietary Resin (TRADE SECRET)Bioaccumulative potentialNot established.methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).n-butyl acetate (123-86-4)BCF fish 114 (BCF)Log Pow2.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 25
C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.isobutyl acetate (110-19-0)BCF fish 14 - 9.7 (BCF)Log Pow1.59 - 1.78Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.2-propanol (67-63-0)Log Pow0.05 (Weight of evidence approach; Other; 25 C)Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.titanium(IV) oxide (13463-67-7)Bioaccumulative potentialNot bioaccumulative.solvent nr 5 (64742-89-8)Bioaccumulative potentialNo bioaccumulation data available.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (19 C)Log KocKoc,352; Estimated value; log Koc; 2.55; Estimated valuemethyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log KocKoc,34; Calculated valueEcology - soilSlightly harmful to plants.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)n-butyl acetate (123-86-4)Surface tension0.0613 N/m (20 C; 1 g/l)Log Koclog Koc,SRC PCKOCWIN v2.0; 1.268 - 1.844; QSARisobutyl acetate (110-19-0)Surface tension0.024 N/m (20 C)2-propanol (67-63-0)Surface tension0.021 N/m (25 C)
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.Other information :Avoid release to the environment.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)11/14
SECTION 13: Disposal considerations
13.1.Disposal methods
Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapors are flammable.Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) :PAINTClass (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120Packing group (DOT) :II - Medium DangerHazard labels (DOT) :3 - Flammable liquidOther information :No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) :UN 1263 paint, 3, IIUN-No. (IMDG) :1263Proper Shipping Name (IMDG) :paintClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
Proprietary Resin (TRADE SECRET)Not listed on the United States TSCA (Toxic Substances Control Act) inventory
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)12/14methyl ethyl ketone (78-93-3)CERCLA RQ5000 lbtalc (14807-96-6)Listed on the United States TSCA (Toxic Substances Control Act) inventorycobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventoryn-butyl acetate (123-86-4)CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Delayed (chronic) health hazard
Fire hazard
titanium(IV) oxide (13463-67-7)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)Proprietary Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)talc (14807-96-6)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)titanium(IV) oxide (13463-67-7)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
titanium(IV) oxide (13463-67-7)Listed on IARC (International Agency for Research on Cancer)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
YesNoNoNo0.1 g/day
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)13/14styrene, inhibited (100-42-5)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
talc (14807-96-6)U.S. - New Jersey - Right to Know Hazardous Substance Listtitanium(IV) oxide (13463-67-7)U.S. - New Jersey - Right to Know Hazardous Substance List
SECTION 16: Other information
Other information :None.Full text of H-phrases:---
---
H225Highly flammable liquid and vapor---
---
H226Flammable liquid and vapor---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H332Harmful if inhaled---
---
H335May cause respiratory irritation---
---
H336May cause drowsiness or dizziness---
---
H351Suspected of causing cancer---
---
H361Suspected of damaging fertility or the unborn child---
---
H372Causes damage to organs through prolonged or repeated exposure---
---
H400Very toxic to aquatic life---
---
H411Toxic to aquatic life with long lasting effectsNFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)14/14
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixturesTrade name :WHITE EZ SANDING PRIMERCAS-No. :mixtureProduct code :714-061Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 2
H225 Highly flammable liquid and vaporSkin corrosion/irritation
Category 2
H315 Causes skin irritationSerious eye damage/eye
irritation Category 2A
H319 Causes serious eye irritationCarcinogenicity Category 2H351 Suspected of causing cancerReproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn childSpecific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02GHS07GHS08
Signal word (GHS-US) :DangerHazard statements (GHS-US) :H225 – Highly flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) :P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)2/14 P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
P270 – Do not eat, drink or smoke when using this product
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P314 – Get medical advice/attention if you feel unwell
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
NameProduct identifier%GHS-US classificationtalc(CAS-No.) 14807-96-6<= 35Not classifiedProprietary Resin(CAS-No.) TRADE SECRET<= 25Not classifiedstyrene, inhibited(CAS-No.) 100-42-5<= 18Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
titanium(IV) oxide(CAS-No.) 13463-67-7<= 10Carc. 2, H351methyl ethyl ketone(CAS-No.) 78-93-3<= 6Flam. Liq. 2, H225
STOT SE 3, H336
n-butyl acetate(CAS-No.) 123-86-4<= 6Flam. Liq. 3, H226
STOT SE 3, H336
solvent nr 5(CAS-No.) 64742-89-8<= 2Flam. Liq. 2, H225isobutyl acetate(CAS-No.) 110-19-0<= 1Flam. Liq. 2, H2252-propanol(CAS-No.) 67-63-0<= 1Flam. Liq. 2, H225
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.5Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)3/14First-aid measures after inhalation :Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact :Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label).
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Foam. Dry powder. Carbon dioxide. Water spray. Sand.Unsuitable extinguishing media :Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapor.Explosion hazard :May form flammable/explosive vapor-air mixture.Reactivity :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Evacuate unnecessary personnel.
6.1.2.For emergency responders
Protective equipment :Equip cleanup crew with proper protection.Emergency procedures :Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)4/14
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapors are flammable.Precautions for safe handling :Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special
instructions before use. Do not handle until all safety precautions have been read and
understood. Eliminate all ignition sources if safe to do so. Do not breathe
dust/fume/gas/mist/vapors/spray.
Hygiene measures :Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions :Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIHACGIH STEL (ppm)40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
Proprietary Resin (TRADE SECRET)Not applicablemethyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppm (Methyl ethyl ketone (MEK); USA; Time-
weighted average exposure limit 8 h; TLV - Adopted
Value)
ACGIHACGIH STEL (ppm)300 ppm (Methyl ethyl ketone (MEK); USA; Short time
value; TLV - Adopted Value)
talc (14807-96-6)ACGIHACGIH TWA (mg/m )2 mg/m (Talc (containing no asbestos fibers); USA;
Time-weighted average exposure limit 8 h; TLV -
Adopted Value; Respirable fraction. The value is for
particulate matter containing no asbestos and < 1%
crystalline silica; Talc (containing asbestos fibers); 0.1
fibers/cm ; USA; Time-weighted average exposure
limit 8 h; TLV - Adopted Value; Respirable fibers:
length > 5 m; aspect ratio 3:1, as determined by the
membrane filter method at 400-450X magnification (4-
mm objective), using phase-contrast illumination)
cobalt(II) 2-ethylhexanoate (136-52-7)Not applicablen-butyl acetate (123-86-4)ACGIHACGIH TWA (ppm)150 ppm (n-Butyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)200 ppm (n-Butyl acetate; USA; Short time value; TLV
– Adopted Value)
isobutyl acetate (110-19-0)ACGIHACGIH TWA (ppm)150 ppm (Isobutyl acetate; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)5/142-propanol (67-63-0)ACGIHACGIH TWA (ppm)200 ppm (2-propanol; USA; Time-weighted average
exposure limit 8 h; TLV – Adopted Value)
ACGIHACGIH STEL (ppm)400 ppm (2-propanol; USA; Short time value; TLV –
Adopted Value)
titanium(IV) oxide (13463-67-7)ACGIHACGIH TWA (mg/m )10 mg/m (Titanium dioxide; USA; Time-weighted
average exposure limit 8 h; TLV – Adopted Value)
solvent nr 5 (64742-89-8)Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available).
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective glovesEye protection:Chemical goggles or safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Color :off white
Odor :characteristic
Odor threshold :No data available
pH :No data available
Melting point :No data available
Freezing point :No data available
Boiling point :>= 79.4 C
Flash point :>= -11.1 C
Relative evaporation rate (butyl acetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapor.
Vapor pressure :No data available
Relative vapor density at 20 C :No data available
Relative density :<=
Specific gravity / density :1.42Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)6/14Viscosity, kinematic :No data available
Viscosity, dynamic :No data available
Explosion limits :No data available
Explosive properties :No data available
Oxidizing properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)12 mg/l/4h (Rat; Literature study)LC50 inhalation rat (ppm)2770 ppm/4h (Rat; Literature study)ATE US (oral)5000.000 mg/kg body weightATE US (dermal)2820.000 mg/kg body weightATE US (gases)2770.000 ppmV/4hATE US (vapors)12.000 mg/l/4hATE US (dust, mist)1.500 mg/l/4hmethyl ethyl ketone (78-93-3)ATE US (oral)2737.000 mg/kg body weightATE US (dermal)6480.000 mg/kg body weightATE US (gases)11300.000 ppmV/4hATE US (vapors)34.000 mg/l/4hATE US (dust, mist)34.000 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129.000 mg/kg body weightn-butyl acetate (123-86-4)LD50 oral rat10770 mg/kg (Rat; Equivalent or similar to OECD 423; Experimental value; 12789 mg/kg; Rat;
Equivalent or similar to OECD 423; Experimental value; 10760 mg/kg bodyweight; Rat)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)7/14
n-butyl acetate (123-86-4)
LD50 dermal rabbit> 17600 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >14112
mg/kg bodyweight; Rabbit)
ATE US (oral)10770.000 mg/kg body weightisobutyl acetate (110-19-0)LD50 oral rat13400 mg/kg (Rat)LD50 dermal rabbit> 5000 mg/kg (Rabbit)ATE US (oral)13400.000 mg/kg body weight2-propanol (67-63-0)LD50 dermal rabbit12870 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; 16.4; Rabbit)LC50 inhalation rat (mg/l)73 mg/l/4h (Rat)ATE US (oral)5045.000 mg/kg body weightATE US (dermal)12870.000 mg/kg body weightATE US (vapors)73.000 mg/l/4hATE US (dust, mist)73.000 mg/l/4htitanium(IV) oxide (13463-67-7)LD50 oral rat> 10000 mg/kg (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure; Experimental
value; > 5000 mg/kg bodyweight; Rat; Experimental value)
LD50 dermal rabbit> 10000 mg/kg (Rabbit; Literature study)LC50 inhalation rat (mg/l)> 6.8 mg/l/4h (Rat; Experimental value)solvent nr 5 (64742-89-8)LD50 oral rat> 10000 mg/kg (Rat)LD50 dermal rabbit18000 mg/kg (Rabbit)LC50 inhalation rat (mg/l)301 mg/l/4h (Rat)ATE US (dermal)18000.000 mg/kg body weightATE US (vapors)301.000 mg/l/4hATE US (dust, mist)301.000 mg/l/4hSkin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitization :Not classifiedGerm cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) Status3 – Reasonably anticipated to be Human Carcinogentalc (14807-96-6)IARC group3 – Not classifiablecobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humans2-propanol (67-63-0)IARC group3 – Not classifiabletitanium(IV) oxide (13463-67-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure:Not classifiedSpecific target organ toxicity repeated
exposure
:Causes damage to organs through prolonged or repeated exposure.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)8/14Aspiration hazard :Not classifiedPotential Adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/effects after skin contact :Causes skin irritation.Symptoms/effects after eye contact :Causes serious eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
methyl ethyl ketone (78-93-3)EC50 Daphnia 1308 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
LC50 fish 22993 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Static
system; Fresh water; Experimental value)
talc (14807-96-6)LC50 fish 1> 100 g/l (LC50; 24 h; Brachydanio rerio)cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
n-butyl acetate (123-86-4)LC50 fish 118 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
isobutyl acetate (110-19-0)LC50 fish 1100 mg/l (LC50; 96 h)EC50 Daphnia 2146 – 192 mg/l (EC50; 48 h)2-propanol (67-63-0)LC50 fish 29640 mg/l (LC50; OECD 203: Fish, Acute Toxicity Test; 96 h; Pimephales promelas; Flow-
through system; Fresh water; Experimental value)
EC50 Daphnia 213299 mg/l (EC50; Other; 48 h; Daphnia magna)Threshold limit algae 1> 1000 mg/l (EC50; UBA; 72 h; Scenedesmus subspicatus)titanium(IV) oxide (13463-67-7)EC50 Daphnia 1> 100 mg/l (LC50; Equivalent or similar to OECD 202; 48 h; Daphnia magna; Static system;
Fresh water; Weight of evidence)
Threshold limit algae 161 mg/l (EC50; Other; 72 h; Pseudokirchneriella subcapitata; Static system; Fresh water;
Experimental value)
12.2.Persistence and degradability
WHITE EZ SANDING PRIMER (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityReadily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)9/14Proprietary Resin (TRADE SECRET)Persistence and degradabilityNot established.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
BOD (% of ThOD)> 0.5 (5 days; Literature study)talc (14807-96-6)Persistence and degradabilityBiodegradability: not applicable.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
cobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.n-butyl acetate (123-86-4)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Not established.Biochemical oxygen demand (BOD)
0.15 – 0.5 g O /g substance
Chemical oxygen demand (COD)
2.32 g O /g substance
ThOD
2.21 g O /g substance
isobutyl acetate (110-19-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Photolysis in the air. Not
established.
ThOD
2.2 g O /g substance
BOD (% of ThOD)0.62-propanol (67-63-0)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. No (test)data on mobility of the substance available. Not established.
Biochemical oxygen demand (BOD)
1.19 g O /g substance
Chemical oxygen demand (COD)
2.23 g O /g substance
ThOD
2.4 g O /g substance
titanium(IV) oxide (13463-67-7)Persistence and degradabilityBiodegradability: not applicable. Low potential for mobility in soil.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
solvent nr 5 (64742-89-8)Persistence and degradabilityBiodegradability in soil: no data available. No (test)data on mobility of the components
available.
12.3.Bioaccumulative potential
WHITE EZ SANDING PRIMER (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (BCF)Log Pow2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)10/14
styrene, inhibited (100-42-5)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.Proprietary Resin (TRADE SECRET)Bioaccumulative potentialNot established.methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).n-butyl acetate (123-86-4)BCF fish 114 (BCF)Log Pow2.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 25
C)
Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.isobutyl acetate (110-19-0)BCF fish 14 - 9.7 (BCF)Log Pow1.59 - 1.78Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500). Not established.2-propanol (67-63-0)Log Pow0.05 (Weight of evidence approach; Other; 25 C)Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.titanium(IV) oxide (13463-67-7)Bioaccumulative potentialNot bioaccumulative.solvent nr 5 (64742-89-8)Bioaccumulative potentialNo bioaccumulation data available.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (19 C)Log KocKoc,352; Estimated value; log Koc; 2.55; Estimated valuemethyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log KocKoc,34; Calculated valueEcology - soilSlightly harmful to plants.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)n-butyl acetate (123-86-4)Surface tension0.0613 N/m (20 C; 1 g/l)Log Koclog Koc,SRC PCKOCWIN v2.0; 1.268 - 1.844; QSARisobutyl acetate (110-19-0)Surface tension0.024 N/m (20 C)2-propanol (67-63-0)Surface tension0.021 N/m (25 C)
12.5.Other adverse effects
Effect on the global warming :No known effects from this product.GWPmix comment :No known effects from this product.Other information :Avoid release to the environment.
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)11/14
SECTION 13: Disposal considerations
13.1.Disposal methods
Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information :Handle empty containers with care because residual vapors are flammable.Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) :PAINTClass (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120Packing group (DOT) :II - Medium DangerHazard labels (DOT) :3 - Flammable liquidOther information :No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) :UN 1263 paint, 3, IIUN-No. (IMDG) :1263Proper Shipping Name (IMDG) :paintClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium danger
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
Proprietary Resin (TRADE SECRET)Not listed on the United States TSCA (Toxic Substances Control Act) inventory
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)12/14methyl ethyl ketone (78-93-3)CERCLA RQ5000 lbtalc (14807-96-6)Listed on the United States TSCA (Toxic Substances Control Act) inventorycobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventoryn-butyl acetate (123-86-4)CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Delayed (chronic) health hazard
Fire hazard
titanium(IV) oxide (13463-67-7)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)Proprietary Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)talc (14807-96-6)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)titanium(IV) oxide (13463-67-7)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
titanium(IV) oxide (13463-67-7)Listed on IARC (International Agency for Research on Cancer)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
YesNoNoNo0.1 g/day
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)13/14styrene, inhibited (100-42-5)U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
talc (14807-96-6)U.S. - New Jersey - Right to Know Hazardous Substance Listtitanium(IV) oxide (13463-67-7)U.S. - New Jersey - Right to Know Hazardous Substance List
SECTION 16: Other information
Other information :None.Full text of H-phrases:---
---
H225Highly flammable liquid and vapor---
---
H226Flammable liquid and vapor---
---
H315Causes skin irritation---
---
H317May cause an allergic skin reaction---
---
H319Causes serious eye irritation---
---
H332Harmful if inhaled---
---
H335May cause respiratory irritation---
---
H336May cause drowsiness or dizziness---
---
H351Suspected of causing cancer---
---
H361Suspected of damaging fertility or the unborn child---
---
H372Causes damage to organs through prolonged or repeated exposure---
---
H400Very toxic to aquatic life---
---
H411Toxic to aquatic life with long lasting effectsNFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
WHITE EZ SANDING PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
04/18/2018EN (English US)14/14
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 11/12/2020
11/12/2020EN (English)Page 1
SECTION 1: Identification
1.1. Identification
Product form :MixtureTrade name :DURATEC WHITE FLEX IMC PRIMERCAS-No. :mixtureProduct code :714-007Formula :na
1.2. Recommended use and restrictions on use
Use of the substance/mixture :COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number :ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids,
Category 2
H225 Highly flammable liquid and vapour.Skin corrosion/irritation,
Category 2
H315 Causes skin irritation.Serious eye damage/eye
irritation, Category 2
H319 Causes serious eye irritation.Skin sensitisation,
Category 1
H317 May cause an allergic skin reaction.Carcinogenicity, Category
2
H351 Suspected of causing cancer.Reproductive toxicity,
Category 2
H361 Suspected of damaging fertility or the unborn child.Specific target organ
toxicity Single exposure,
Category 1
H370 Causes damage to organs.Specific target organ
toxicity Single exposure,
Category 3, Respiratory
tract irritation
H335 May cause respiratory irritation.Specific target organ
toxicity Repeated
exposure, Category 1
H372 Causes damage to organs through prolonged or repeated exposure.Hazardous to the aquatic
environment Acute
Hazard, Category 2
H401 Toxic to aquatic life
Full text of H statements : see section 16
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)2/14
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :Signal word (GHS US) :DangerHazard statements (GHS US) :H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H370 – Causes damage to organs.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
Precautionary statements (GHS US) :P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment.
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust, fume, mist, spray, vapours.
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace.
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P307+P311 – If exposed: Call a poison center/doctor.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center or doctor if you feel unwell.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal
regulations..
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)3/14
3.2. Mixtures
NameProduct identifier%GHS-US classificationUnsaturated Polyester Resin(CAS-No.) TRADE SECRET<= 42Not classifiedtalc(CAS-No.) 14807-96-6<= 35Carc. 2, H351styrene, inhibited(CAS-No.) 100-42-5<= 24Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
methyl ethyl ketone(CAS-No.) 78-93-3<= 16Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
titanium(IV) oxide(CAS-No.) 13463-67-7<= 10Carc. 2, H351
Aquatic Acute 3, H402
methanol(CAS-No.) 67-56-1<= 1.5Flam. Liq. 2, H225
Acute Tox. 3 (Oral), H301
Acute Tox. 3 (Inhalation), H331
STOT SE 1, H370
cobalt(II) 2-ethylhexanoate(CAS-No.) 136-52-7<= 0.8Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general :Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation :Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. Call a
poison center or a doctor if you feel unwell.
First-aid measures after skin contact :Rinse skin with water/shower. Take off immediately all contaminated clothing. Wash with plenty
of water/ . Wash contaminated clothing before reuse. If skin irritation occurs: Get medical
advice/attention. Specific treatment (see supplemental first aid instruction on this label). If skin
irritation occurs: Get medical advice/attention.
First-aid measures after eye contact :Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention. If eye irritation
persists: Get medical advice/attention.
First-aid measures after ingestion :Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact :Causes skin irritation. Irritation.Symptoms/effects after eye contact :Causes serious eye irritation. Eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media :Sand. Water spray. Dry powder. Foam. Carbon dioxide.Unsuitable extinguishing media :Do not use a heavy water stream.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)4/14
5.2. Specific hazards arising from the chemical
Fire hazard :Highly flammable liquid and vapour.Explosion hazard :May form flammable/explosive vapour-air mixture.Reactivity in case of fire :No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions :Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting :Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures :Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1.For non-emergency personnel
Protective equipment :Gloves. Protective goggles. Protective clothing.Emergency procedures :Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.
6.1.2.For emergency responders
Protective equipment :Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures :Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment :Dam up the liquid spill. Contain released product, pump into suitable containers.Methods for cleaning up :Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information :Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed :Handle empty containers with care because residual vapours are flammable.Precautions for safe handling :Wear personal protective equipment. Eliminate all ignition sources if safe to do so. Wash hands
and other exposed areas with mild soap and water before eating, drinking or smoking and
when leaving work. Provide good ventilation in process area to prevent formation of vapour. No
open flames. No smoking. Use only non-sparking tools. Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood. Use only outdoors or
in a well-ventilated area. Do not breathe dust/fume/gas/mist/vapours/spray. Keep away from
heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond
container and receiving equipment. Take precautionary measures against static discharge.
Flammable vapours may accumulate in the container. Use explosion-proof equipment. Avoid
contact with skin and eyes.
Hygiene measures :Wash hands, forearms and face thoroughly after handling. Wash contaminated clothing before
reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling
the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures :Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical/ventilating/lighting
equipment.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)5/14Storage conditions :Keep only in the original container in a cool, well ventilated place away from : Keep in fireproof
place. Keep container tightly closed. Store locked up. Store in a well-ventilated place. Keep
cool.
Incompatible products :Strong bases. Strong acids.Incompatible materials :Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)ACGIHACGIH TWA (ppm)20 ppmACGIHACGIH STEL (ppm)40 ppmUnsaturated Polyester Resin (TRADE SECRET)Not applicable methyl ethyl ketone (78-93-3)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)300 ppmmethanol (67-56-1)ACGIHACGIH TWA (ppm)200 ppmACGIHACGIH STEL (ppm)250 ppmtalc (14807-96-6)ACGIHACGIH TWA (mg/m )2 mg/m (Respirable fraction. The value is for
particulate matter containing no asbestos and < 1%
crystalline silica)
0.1 fibers/cm (Respirable fibers: length > 5 m; aspect
ratio 3:1, as determined by the membrane filter
method at 400-450X magnification (4-mm objective),
using phase-contrast illumination)
cobalt(II) 2-ethylhexanoate (136-52-7)Not applicable titanium(IV) oxide (13463-67-7)ACGIHACGIH TWA (mg/m )10 mg/m
8.2. Appropriate engineering controls
Appropriate engineering controls :Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls :Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:Avoid all unnecessary exposure.
Hand protection:Wear protective gloves.Eye protection:Chemical goggles or safety glasses. Safety glassesSkin and body protection:Wear suitable protective clothing
Respiratory protection:Wear appropriate mask. [In case of inadequate ventilation] wear respiratory protection.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)6/14
Other information:Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state :Liquid
Colour :off white
Odour :characteristic
Odour threshold :No data available
pH :No data available
Melting point :Not applicable
Freezing point :No data available
Boiling point :>= 64.4 C
Flash point :>= -6.67 C
Relative evaporation rate (butylacetate=1) :No data available
Flammability (solid, gas) :Highly flammable liquid and vapour.
Vapour pressure :No data available
Relative vapour density at 20 C :No data available
Relative density :<=
Density :1.32Solubility :No data available
Log Pow :No data available
Auto-ignition temperature :No data available
Decomposition temperature :No data available
Viscosity, kinematic :No data availableViscosity, dynamic :No data available
Explosive limits :No data available
Explosive properties :No data available
Oxidising properties :No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1.Reactivity
No reactivity hazard other than the effects described in sub-sections below. Highly flammable liquid and vapour.
10.2.Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapour. May form
flammable/explosive vapour-air mixture.
10.3.Possibility of hazardous reactions
Not established.
10.4.Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of
ignition.
10.5.Incompatible materials
Strong acids. Strong bases.
10.6.Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1.Information on toxicological effects
Acute toxicity (oral) :Not classifiedAcute toxicity (dermal) :Not classified
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)7/14Acute toxicity (inhalation) :Not classifiedstyrene, inhibited (100-42-5)LD50 oral rat5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)LD50 dermal rat> 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit5010 mg/kg (Rabbit; Literature study)LC50 Inhalation – Rat11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))LC50 Inhalation – Rat [ppm]2770 ppm/4h (Rat; Literature study)ATE US (oral)5000 mg/kg bodyweightATE US (dermal)5010 mg/kg bodyweightATE US (gases)2770 ppmv/4hATE US (vapours)11 mg/l/4hATE US (dust,mist)1.5 mg/l/4hmethyl ethyl ketone (78-93-3)LD50 oral rat2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit> 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral)2193 mg/kg bodyweightmethanol (67-56-1)LD50 oral rat1187 – 2769 mg/kg bodyweight (BASF test, Rat, Male / female, Weight of evidence, Aqueous
solution, Oral, 7 day(s))
LD50 dermal rabbit17100 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal)LC50 Inhalation – Rat128.2 mg/l air (BASF test, 4 h, Rat, Male / female, Experimental value, Inhalation (vapours))ATE US (oral)100 mg/kg bodyweightATE US (dermal)17100 mg/kg bodyweightATE US (gases)700 ppmv/4hATE US (vapours)3 mg/l/4hATE US (dust,mist)0.5 mg/l/4hcobalt(II) 2-ethylhexanoate (136-52-7)LD50 oral rat3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat> 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)ATE US (oral)3129 mg/kg bodyweighttitanium(IV) oxide (13463-67-7)LD50 oral rat> 5000 mg/kg bodyweight (OECD 425: Acute Oral Toxicity: Up-and-Down Procedure, Rat,
Female, Experimental value, Oral, 14 day(s))
LC50 Inhalation – Rat> 6.82 mg/l (Other, 4 h, Rat, Male, Experimental value, Inhalation (dust), 14 day(s))Skin corrosion/irritation :Causes skin irritation.Serious eye damage/irritation :Causes serious eye irritation.Respiratory or skin sensitisation :May cause an allergic skin reaction.Germ cell mutagenicity :Not classifiedCarcinogenicity :Suspected of causing cancer.styrene, inhibited (100-42-5)IARC group2B – Possibly carcinogenic to humansNational Toxicology Program (NTP) StatusReasonably anticipated to be Human Carcinogentalc (14807-96-6)IARC group3 – Not classifiable, 2B – Possibly carcinogenic to humanscobalt(II) 2-ethylhexanoate (136-52-7)IARC group2B – Possibly carcinogenic to humanstitanium(IV) oxide (13463-67-7)IARC group2B – Possibly carcinogenic to humansReproductive toxicity :Suspected of damaging fertility or the unborn child.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)8/14STOT-single exposure :Causes damage to organs. May cause respiratory irritation.styrene, inhibited (100-42-5)STOT-single exposureMay cause respiratory irritation.methyl ethyl ketone (78-93-3)STOT-single exposureMay cause drowsiness or dizziness.methanol (67-56-1)STOT-single exposureCauses damage to organs.STOT-repeated exposure :Causes damage to organs through prolonged or repeated exposure.styrene, inhibited (100-42-5)STOT-repeated exposureCauses damage to organs through prolonged or repeated exposure.Aspiration hazard :Not classifiedViscosity, kinematic :No data availablePotential adverse human health effects and
symptoms
:Harmful if inhaled. Based on available data, the classification criteria are not met.Symptoms/effects :May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation :Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact :Causes skin irritation. Irritation.Symptoms/effects after eye contact :Causes serious eye irritation. Eye irritation.
SECTION 12: Ecological information
12.1.Toxicity
Ecology – general :The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)LC50 fish 110 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 14.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae)4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
methyl ethyl ketone (78-93-3)LC50 fish 12993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae)1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
methanol (67-56-1)LC50 fish 115400 mg/l (EPA 660/3 – 75/009, 96 h, Lepomis macrochirus, Flow-through system, Fresh
water, Experimental value, Lethal)
EC50 Daphnia 118260 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 96 h, Daphnia magna, Semi-
static system, Fresh water, Experimental value, Locomotor effect)
ErC50 (algae)22000 mg/l (OECD 201: Alga, Growth Inhibition Test, 96 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value)
talc (14807-96-6)LC50 fish 1> 100 g/l (24 h, Brachydanio rerio, Semi-static system)cobalt(II) 2-ethylhexanoate (136-52-7)LC50 fish 146.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)9/14
cobalt(II) 2-ethylhexanoate (136-52-7)
EC50 Daphnia 10.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)LC50 fish 254.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 20.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)Threshold limit algae 1144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 232.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
titanium(IV) oxide (13463-67-7)LC50 fish 1> 100 mg/l (Equivalent or similar to OECD 203, 96 h, Oncorhynchus mykiss, Static system,
Fresh water, Experimental value, Nominal concentration)
ErC50 (algae)61 mg/l (EPA 600/9-78-018, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, Nominal concentration)
12.2.Persistence and degradability
DURATEC WHITE FLEX IMC PRIMER (mixture)Persistence and degradabilityNot established.styrene, inhibited (100-42-5)Persistence and degradabilityBiodegradable in the soil. Readily biodegradable in water.Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD)0.42 (Literature study)Unsaturated Polyester Resin (TRADE SECRET)Persistence and degradabilityNot established.methyl ethyl ketone (78-93-3)Persistence and degradabilityReadily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
methanol (67-56-1)Persistence and degradabilityReadily biodegradable in the soil. Readily biodegradable in water.Biochemical oxygen demand (BOD)
0.6 – 1.12 g O /g substance
Chemical oxygen demand (COD)
1.42 g O /g substance
ThOD
1.5 g O /g substance
talc (14807-96-6)Persistence and degradabilityBiodegradability: not applicable.Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
BOD (% of ThOD)Not applicablecobalt(II) 2-ethylhexanoate (136-52-7)Persistence and degradabilityReadily biodegradable in water. No (test)data on mobility of the substance available.titanium(IV) oxide (13463-67-7)Persistence and degradabilityBiodegradability: not applicable.Chemical oxygen demand (COD)
Not applicable (inorganic)
ThOD
Not applicable (inorganic)
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)10/14
12.3.Bioaccumulative potentialDURATEC WHITE FLEX IMC PRIMER (mixture)Bioaccumulative potentialNot established.styrene, inhibited (100-42-5)BCF fish 135.5 (Carassius auratus, Literature study)Log Pow2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4).Unsaturated Polyester Resin (TRADE SECRET)Bioaccumulative potentialNot established.methyl ethyl ketone (78-93-3)Log Pow0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potentialLow potential for bioaccumulation (Log Kow < 4). Not established.methanol (67-56-1)BCF fish 11 - 4.5 (72 h, Cyprinus carpio, Static system, Fresh water, Experimental value)Log Pow-0.77 (Experimental value)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).cobalt(II) 2-ethylhexanoate (136-52-7)BCF fish 11.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)Bioaccumulative potentialLow potential for bioaccumulation (BCF < 500).titanium(IV) oxide (13463-67-7)Bioaccumulative potentialNot bioaccumulative.
12.4.Mobility in soil
styrene, inhibited (100-42-5)Surface tension0.032 N/m (20 C)Log Koc2.55 (log Koc, Estimated value)Ecology - soilLow potential for adsorption in soil.methyl ethyl ketone (78-93-3)Surface tension0.024 N/m (20 C)Log Koc1.53 (log Koc, Calculated value)Ecology - soilHighly mobile in soil. Slightly harmful to plants.methanol (67-56-1)Surface tension0.023 N/m (20 C)Log Koc0.088 (log Koc, SRC PCKOCWIN v2.0, Calculated value)Ecology - soilHighly mobile in soil.cobalt(II) 2-ethylhexanoate (136-52-7)Surface tension0.064 N/m (20 C; 1 g/l)titanium(IV) oxide (13463-67-7)Ecology - soilLow potential for mobility in soil.
12.5.Other adverse effects
Other information :Avoid release to the environment.
SECTION 13: Disposal considerations
13.1.Disposal methods
Waste treatment methods :Dispose of contents/container in accordance with licensed collector s sorting instructions.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)11/14Product/Packaging disposal recommendations :Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to hazardous or special waste collection point, in accordance with local,
regional, national and/or international regulation.
Additional information :Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials :Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOTTransport document description :UN1263 Paint, 3, II UN-No.(DOT) :UN1263 Proper Shipping Name (DOT) :Paint Class (DOT) :3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120 Packing group (DOT) :II - Medium Danger Hazard labels (DOT) :3 - Flammable liquid DOT Packaging Non Bulk (49 CFR 173.xxx) :173 DOT Packaging Bulk (49 CFR 173.xxx) :242DOT Special Provisions (49 CFR 172.102) :149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
TP28 - A portable tank having a minimum test pressure of 2.65 bar (265 kPa) may be used
provided the calculated test pressure is 2.65 bar or less based on the MAWP of the hazardous
material, as defined in 178.275 of this subchapter, where the test pressure is 1.5 times the
MAWP.
DOT Packaging Exceptions (49 CFR 173.xxx):150 DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:5 L DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
:60 L DOT Vessel Stowage Location :B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number :128 Other information :No supplementary information available.
Transportation of Dangerous GoodsTransport by sea
Transport document description (IMDG) :UN 1263 PAINT, 3, IIUN-No. (IMDG) :1263
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)12/14Proper Shipping Name (IMDG) :PAINTClass (IMDG) :3 - Flammable liquidsPacking group (IMDG) :II - substances presenting medium dangerLimited quantities (IMDG) :5 L
Air transport
Transport document description (IATA) :UN 1263 paint, 3, IIUN-No. (IATA) :1263Proper Shipping Name (IATA) :paintClass (IATA) :3 - Flammable LiquidsPacking group (IATA) :II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ1000 lbSARA Section 311/312 Hazard ClassesImmediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
methyl ethyl ketone (78-93-3)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ5000 lbmethanol (67-56-1)Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ5000 lbSARA Section 311/312 Hazard ClassesFire hazard
Delayed (chronic) health hazard
Immediate (acute) health hazard
talc (14807-96-6)Listed on the United States TSCA (Toxic Substances Control Act) inventorycobalt(II) 2-ethylhexanoate (136-52-7)Listed on the United States TSCA (Toxic Substances Control Act) inventorytitanium(IV) oxide (13463-67-7)Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)Listed on the Canadian DSL (Domestic Substances List)Unsaturated Polyester Resin (TRADE SECRET)Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)methyl ethyl ketone (78-93-3)Listed on the Canadian DSL (Domestic Substances List)methanol (67-56-1)Listed on the Canadian DSL (Domestic Substances List)
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)13/14talc (14807-96-6)Listed on the Canadian DSL (Domestic Substances List)cobalt(II) 2-ethylhexanoate (136-52-7)Listed on the Canadian DSL (Domestic Substances List)titanium(IV) oxide (13463-67-7)Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
titanium(IV) oxide (13463-67-7)Listed on IARC (International Agency for Research on Cancer)
15.3. US State regulations
styrene, inhibited (100-42-5)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
YesNoNoNo27 g/daymethanol (67-56-1)U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
NoYesNoNoComponentState or local regulationsstyrene, inhibited(100-42-5)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
talc(14807-96-6)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methanol(67-56-1)U.S. - New Jersey - Right to Know Hazardous Substance List; U.S. - Pennsylvania -
RTK (Right to Know) List
titanium(IV) oxide(13463-67-7)U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date :11/12/2020Other information :None.
DURATEC WHITE FLEX IMC PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
11/12/2020EN (English)14/14
Full text of H-statements:H225Highly flammable liquid and vapour.H226Flammable liquid and vapour.H301Toxic if swallowed.H315Causes skin irritation.H317May cause an allergic skin reaction.H319Causes serious eye irritation.H331Toxic if inhaled.H332Harmful if inhaled.H335May cause respiratory irritation.H336May cause drowsiness or dizziness.H351Suspected of causing cancer.H361Suspected of damaging fertility or the unborn child.H370Causes damage to organs.H372Causes damage to organs through prolonged or repeated exposure.H400Very toxic to aquatic life.H401Toxic to aquatic lifeH402Harmful to aquatic lifeH411Toxic to aquatic life with long lasting effects.
NFPA health hazard :2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard :3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity :2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard RatingHealth :2 Moderate Hazard - Temporary or minor injury may occurFlammability :3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical :1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
:HPersonal protection H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date: 01/10/2020
01/10/2020 EN (English) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : WHITE SURFACE PRIMER
CAS-No. : mixture
Product code : 714-002
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : COATING
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids, Category 2 H225 Highly flammable liquid and vapour.
Skin corrosion/irritation, Category 2 H315 Causes skin irritation.
Serious eye damage/eye irritation, Category 2 H319 Causes serious eye irritation.
Skin sensitisation, Category 1 H317 May cause an allergic skin reaction.
Carcinogenicity, Category 2 H351 Suspected of causing cancer.
Reproductive toxicity, Category 2 H361 Suspected of damaging fertility or the unborn child.
Specific target organ toxicity Single exposure, Category 1 H370 Causes damage to organs.
Specific target organ toxicity Single exposure, Category 3, Respiratory tract
irritation
H335 May cause respiratory irritation.
Specific target organ toxicity Repeated exposure, Category 1 H372 Causes damage to organs through prolonged or repeated
exposure.
Hazardous to the aquatic environment Acute Hazard, Category 2 H401 Toxic to aquatic life
Full text of H statements : see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Hazard statements (GHS US) : H225 – Highly flammable liquid and vapour.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H361 – Suspected of damaging fertility or the unborn child.
H370 – Causes damage to organs.
H372 – Causes damage to organs through prolonged or repeated exposure.
H401 – Toxic to aquatic life
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 2/14
Precautionary statements (GHS US) : P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust, fume, mist, spray, vapours.
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash hands, forearms and face thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P307+P311 – If exposed: Call a poison center/doctor
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P363 – Wash contaminated clothing before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to in accordance with local, state, and federal regulations.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
Name Product identifier % GHS-US classification
talc
(CAS-No.) 14807-96-6 <= 33 Carc. 2, H351
styrene, inhibited
(CAS-No.) 100-42-5 <= 23 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Aquatic Acute 2, H401
methyl ethyl ketone
(CAS-No.) 78-93-3 <= 13 Flam. Liq. 2, H225
Eye Irrit. 2, H319
STOT SE 3, H336
titanium(IV) oxide
(CAS-No.) 13463-67-7 <= 7 Carc. 2, H351
Aquatic Acute 3, H402
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 3/14
Name Product identifier % GHS-US classification
methanol
(CAS-No.) 67-56-1 <= 1 Flam. Liq. 2, H225
Acute Tox. 3 (Oral), H301
Acute Tox. 3 (Inhalation), H331
STOT SE 1, H370
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.8 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. Suspected of causing cancer. IF
exposed or concerned: Get medical advice/attention.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air
and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Take off immediately all contaminated clothing. Wash with plenty
of water/ . Wash contaminated clothing before reuse. If skin irritation occurs: wash throughly
for five minutes. seek medical attention. Get medical advice/attention. Specific treatment (see
seek medical attention. on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapour.
Explosion hazard : May form flammable/explosive vapour-air mixture.
Reactivity in case of fire : No reactivity hazard other than the effects described in sub-sections below.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 4/14
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapours are flammable.
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapour. No open flames. No smoking. Use only non-
sparking tools. Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES,
MIST, OR VAPORS. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so. Do
not breathe dust/fume/gas/mist/vapours/spray.
Hygiene measures : Wash HANDS thoroughly after handling. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm
ACGIH ACGIH STEL (ppm) 40 ppm
methyl ethyl ketone (78-93-3)
ACGIH ACGIH TWA (ppm) 200 ppm
ACGIH ACGIH STEL (ppm) 300 ppm
titanium(IV) oxide (13463-67-7)
ACGIH ACGIH TWA (mg/m ) 10 mg/m
methanol (67-56-1)
ACGIH ACGIH TWA (ppm) 200 ppm
ACGIH ACGIH STEL (ppm) 250 ppm
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 5/14
talc (14807-96-6)
ACGIH ACGIH TWA (mg/m ) 2 mg/m (Respirable fraction. The value is for
particulate matter containing no asbestos and < 1%
crystalline silica)
0.1 fibers/cm (Respirable fibers: length > 5 m; aspect
ratio 3:1, as determined by the membrane filter
method at 400-450X magnification (4-mm objective),
using phase-contrast illumination)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves.
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Colour : off white
Odour : characteristic
Odour threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : >= 64.4 C
Flash point : 4 – 7 C
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapour.
Vapour pressure : No data available
Relative vapour density at 20 C : No data available
Relative density : <= 1.3
Density : 11 g/l
Solubility : No data available
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 6/14
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapour. May form
flammable/explosive vapour-air mixture.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) : Not classified
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Not classified
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat > 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000 mg/kg bodyweight
ATE US (dermal) 5010 mg/kg bodyweight
ATE US (gases) 2770 ppmv/4h
ATE US (vapours) 11 mg/l/4h
ATE US (dust,mist) 1.5 mg/l/4h
methyl ethyl ketone (78-93-3)
LD50 oral rat 2193 mg/kg bodyweight (Equivalent or similar to OECD 423, Rat, Male / female, Read-across,
Oral)
LD50 dermal rabbit > 10 ml/kg (Equivalent or similar to OECD 402, 24 h, Rabbit, Male, Experimental value,
Dermal)
ATE US (oral) 2193 mg/kg bodyweight
titanium(IV) oxide (13463-67-7)
LD50 oral rat > 5000 mg/kg bodyweight (OECD 425: Acute Oral Toxicity: Up-and-Down Procedure, Rat,
Female, Experimental value, Oral, 14 day(s))
LC50 inhalation rat (mg/l) > 6.82 mg/l (Other, 4 h, Rat, Male, Experimental value, Inhalation (dust), 14 day(s))
methanol (67-56-1)
LD50 oral rat 1187 – 2769 mg/kg bodyweight (BASF test, Rat, Male / female, Weight of evidence, Aqueous
solution, Oral, 7 day(s))
LD50 dermal rabbit 17100 mg/kg (Rabbit, Inconclusive, insufficient data, Dermal)
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 7/14
methanol (67-56-1)
LC50 inhalation rat (mg/l) 128.2 mg/l air (BASF test, 4 h, Rat, Male / female, Experimental value, Inhalation (vapours))
ATE US (oral) 100 mg/kg bodyweight
ATE US (dermal) 17100 mg/kg bodyweight
ATE US (gases) 700 ppmv/4h
ATE US (vapours) 3 mg/l/4h
ATE US (dust,mist) 0.5 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg bodyweight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg bodyweight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129 mg/kg bodyweight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitisation : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status Reasonably anticipated to be Human Carcinogen
titanium(IV) oxide (13463-67-7)
IARC group 2B – Possibly carcinogenic to humans
talc (14807-96-6)
IARC group 3 – Not classifiable, 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
STOT-single exposure : Causes damage to organs. May cause respiratory irritation.
styrene, inhibited (100-42-5)
STOT-single exposure May cause respiratory irritation.
methyl ethyl ketone (78-93-3)
STOT-single exposure May cause drowsiness or dizziness.
methanol (67-56-1)
STOT-single exposure Causes damage to organs.
STOT-repeated exposure : Causes damage to organs through prolonged or repeated exposure.
styrene, inhibited (100-42-5)
STOT-repeated exposure Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
Potential adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.). Suspected of damaging fertility or the unborn child. Causes damage to
organs through prolonged or repeated exposure.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation.
Symptoms/effects after eye contact : Causes serious eye irritation.
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 8/14
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : The product is not considered harmful to aquatic organisms nor to cause long-term adverse
effects in the environment.
styrene, inhibited (100-42-5)
LC50 fish 1 10 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 Daphnia 1 4.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 (algae) 4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
methyl ethyl ketone (78-93-3)
LC50 fish 1 2993 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Static system,
Fresh water, Experimental value, GLP)
EC50 Daphnia 1 308 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Static
system, Fresh water, Experimental value, GLP)
ErC50 (algae) 1972 mg/l (OECD 201: Alga, Growth Inhibition Test, 72 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value, GLP)
titanium(IV) oxide (13463-67-7)
LC50 fish 1 > 100 mg/l (Equivalent or similar to OECD 203, 96 h, Oncorhynchus mykiss, Static system,
Fresh water, Experimental value, Nominal concentration)
ErC50 (algae) 61 mg/l (EPA 600/9-78-018, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, Nominal concentration)
methanol (67-56-1)
LC50 fish 1 15400 mg/l (EPA 660/3 – 75/009, 96 h, Lepomis macrochirus, Flow-through system, Fresh
water, Experimental value, Lethal)
EC50 Daphnia 1 18260 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 96 h, Daphnia magna, Semi-
static system, Fresh water, Experimental value, Locomotor effect)
ErC50 (algae) 22000 mg/l (OECD 201: Alga, Growth Inhibition Test, 96 h, Pseudokirchneriella subcapitata,
Static system, Fresh water, Experimental value)
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h, Brachydanio rerio, Semi-static system)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
12.2. Persistence and degradability
WHITE SURFACE PRIMER (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42 (Literature study)
methyl ethyl ketone (78-93-3)
Persistence and degradability Readily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD)
2.03 g O /g substance
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 9/14
methyl ethyl ketone (78-93-3)
Chemical oxygen demand (COD)
2.31 g O /g substance
ThOD
2.44 g O /g substance
titanium(IV) oxide (13463-67-7)
Persistence and degradability Biodegradability: not applicable.
Chemical oxygen demand (COD)
Not applicable (inorganic)
ThOD
Not applicable (inorganic)
methanol (67-56-1)
Persistence and degradability Readily biodegradable in the soil. Readily biodegradable in water.
Biochemical oxygen demand (BOD)
0.6 – 1.12 g O /g substance
Chemical oxygen demand (COD)
1.42 g O /g substance
ThOD
1.5 g O /g substance
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD)
Not applicable
Chemical oxygen demand (COD)
Not applicable
ThOD
Not applicable
BOD (% of ThOD) Not applicable
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
12.3. Bioaccumulative potential
WHITE SURFACE PRIMER (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus, Literature study)
Log Pow 2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
methyl ethyl ketone (78-93-3)
Log Pow 0.3 (Experimental value, OECD 117: Partition Coefficient (n-octanol/water), HPLC method, 40
C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established.
titanium(IV) oxide (13463-67-7)
Bioaccumulative potential Not bioaccumulative.
methanol (67-56-1)
BCF fish 1 1 - 4.5 (72 h, Cyprinus carpio, Static system, Fresh water, Experimental value)
Log Pow -0.77 (Experimental value)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (20 C)
Log Koc 2.55 (log Koc, Estimated value)
Ecology - soil Low potential for adsorption in soil.
methyl ethyl ketone (78-93-3)
Surface tension 0.024 N/m (20 C)
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 10/14
methyl ethyl ketone (78-93-3)
Log Koc 1.53 (log Koc, Calculated value)
Ecology - soil Highly mobile in soil. Slightly harmful to plants.
titanium(IV) oxide (13463-67-7)
Ecology - soil Low potential for mobility in soil.
methanol (67-56-1)
Surface tension 0.023 N/m (20 C)
Log Koc 0.088 (log Koc, SRC PCKOCWIN v2.0, Calculated value)
Ecology - soil Highly mobile in soil.
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information : Handle empty containers with care because residual vapours are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transport document description : UN1866 Resin solution, 3, II
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : Resin solution
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : II - Medium Danger
Hazard labels (DOT) : 3 - Flammable liquid
DOT Packaging Non Bulk (49 CFR 173.xxx) : 173
DOT Packaging Bulk (49 CFR 173.xxx) : 242
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 11/14
DOT Special Provisions (49 CFR 172.102) : 149 - When transported as a limited quantity or a consumer commodity, the maximum net
capacity specified in 173.150(b)(2) of this subchapter for inner packagings may be increased to
5 L (1.3 gallons).
383 - Packages containing toy plastic or paper caps for toy pistols described as UN0349,
Articles, explosive, n.o.s. (Toy caps), 1.4S or NA0337, Toy caps, 1.4S are not subject to the
subpart E (labeling) requirements of this part when offered for transportation by motor vehicle,
rail freight, cargo vessel, and cargo aircraft and, notwithstanding the packing method assigned
in 173.62 of this subchapter, in conformance with the following conditions:
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure
relief devices are authorized on DOT 57 portable tanks.
IB2 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1). Additional Requirement: Only liquids with a vapor pressure less than or equal to 110
kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55 C (1.3 bar at 131 F) are authorized.
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
TP8 - A portable tank having a minimum test pressure of 1.5 bar (150 kPa) may be used when
the flash point of the hazardous material transported is greater than 0 C (32 F).
DOT Packaging Exceptions (49 CFR 173.xxx) : 150
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
: 5 L
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
: 60 L
DOT Vessel Stowage Location : B - (i) The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel carrying a number of passengers limited to not more than the larger of 25
passengers, or one passenger per each 3 m of overall vessel length; and (ii) On deck only on
passenger vessels in which the number of passengers specified in paragraph (k)(2)(i) of this
section is exceeded.
Emergency Response Guide (ERG) Number : 127
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, II
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : II - substances presenting medium danger
Air transport
Transport document description (IATA) : UN 1866 Resin solution, 3, II
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : Resin solution
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : II - Medium Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 12/14
methyl ethyl ketone (78-93-3)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Not subject to reporting requirements of the United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ 5000 lb
titanium(IV) oxide (13463-67-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
methanol (67-56-1)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 5000 lb
SARA Section 311/312 Hazard Classes Fire hazard
Delayed (chronic) health hazard
Immediate (acute) health hazard
talc (14807-96-6)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
methyl ethyl ketone (78-93-3)
Listed on the Canadian DSL (Domestic Substances List)
titanium(IV) oxide (13463-67-7)
Listed on the Canadian DSL (Domestic Substances List)
methanol (67-56-1)
Listed on the Canadian DSL (Domestic Substances List)
talc (14807-96-6)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
titanium(IV) oxide (13463-67-7)
Listed on IARC (International Agency for Research on Cancer)
15.3. US State regulations
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 13/14
styrene, inhibited (100-42-5)
U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
Yes No No No 27 g/day
methanol (67-56-1)
U.S. -
California -
Proposition 65
- Carcinogens
List
U.S. - California -
Proposition 65 -
Developmental
Toxicity
U.S. - California -
Proposition 65 -
Reproductive
Toxicity - Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk level
(NSRL)
Maximum allowable
dose level (MADL)
No Yes No No
Component State or local regulations
styrene, inhibited(100-42-5) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methyl ethyl ketone(78-93-3) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
talc(14807-96-6) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
titanium(IV) oxide(13463-67-7) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know
Hazardous Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
methanol(67-56-1) U.S. - New Jersey - Right to Know Hazardous Substance List; U.S. - Pennsylvania -
RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Revision date : 01/10/2020
Other information : None.
Full text of H-statements:
H225 Highly flammable liquid and vapour.
H226 Flammable liquid and vapour.
H301 Toxic if swallowed.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H331 Toxic if inhaled.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
H361 Suspected of damaging fertility or the unborn child.
H370 Causes damage to organs.
H372 Causes damage to organs through prolonged or repeated exposure.
H400 Very toxic to aquatic life.
H401 Toxic to aquatic life
H402 Harmful to aquatic life
H411 Toxic to aquatic life with long lasting effects.
WHITE SURFACE PRIMER
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/10/2020 EN (English) 14/14
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
