by | Sep 27, 2025
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1Product identifier: BE769 – Epoxy Tooling Board
Not a hazardous substance
CAS: Non-applicable
Other means of identification:
Non-applicable
1.2Relevant identified uses of the substance or mixture and uses advised against:
Relevant uses: Non Hazardous Substance . For industrial user only.
Uses advised against: All uses not specified in this section or in section 7.3
1.3Details of the supplier of the safety data sheet:
Base Materials
Base Materials Ltd,20 Ashville Way
LE8 6NU Leicester – Whetstone – United Kingdom
Phone: 0116 286 5073
sales@base-materials.com
https://www.base-materials.com/
1.4Emergency telephone number: Ecostar Environmental – Reference Code: EREF-00111 : Telephone: +44 800
246 1972 (office hours), WhatsApp: +44 7496 228 905 (office hours), 24/7
Service +44 800 246 1274
SECTION 2: HAZARDS IDENTIFICATION
2.1Classification of the substance or mixture:
When milling: Dust will be produced
GB CLP Regulation:
The product is not classified as hazardous according to GB CLP Regulation.
2.2Label elements:
GB CLP Regulation:
None
2.3Other hazards:
Product does not meet PBT/vPvB criteria
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1Substance:
Chemical description: Epoxides
Components:
In accordance with Annex II of The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020, the product
contains:
Identification Chemical name/Classification
Concentratio
n
CAS:Non-applicable
Not a hazardous substance
100 %
To obtain more information on the hazards of the substances consult sections 11, 12 and 16.
3.2Mixture:
Non-applicable
Reaction product based on epoxy
SECTION 4: FIRST AID MEASURES
4.1Description of first aid measures:
Consult a doctor in case of discomfort showing the SDS for the product.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 1/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 4: FIRST AID MEASURES (continued)
By inhalation:
In case of symptoms, move the person affected into fresh air.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case
of changes to the skin (stinging, redness, rashes, blisters, ), seek medical advice with this Safety Data Sheet
By eye contact:
Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS
for the product.
By ingestion/aspiration:
In case of consumption in large quantities, it is recommended to seek medical assistance.
Dust: Provide fresh air.
4.2Most important symptoms and effects, both acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3Indication of any immediate medical attention and special treatment needed:
Non-applicable
SECTION 5: FIREFIGHTING MEASURES
5.1Extinguishing media:
Suitable extinguishing media:
Product is non-flammable, with a low risk of fire due to the flammability characteristics of the product in normal
conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of
improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,…)
Unsuitable extinguishing media:
Non-applicable
5.2Special hazards arising from the substance or mixture:
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of storage,
handling and use.
5.3Advice for firefighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained
breathing apparatus (SCBA). Minimum emergency facilities and equipment should be available (fire blankets,
portable first aid kit,…).
Additional provisions:
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an
accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and
tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures. Avoid spillage
of the products used to extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1Personal precautions, protective equipment and emergency procedures:
For non-emergency personnel:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
For emergency responders:
Wear protective equipment. Keep unprotected persons away. See section 8.
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
6.2Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and
ground water.
6.3Methods and material for containment and cleaning up:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 2/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 6: ACCIDENTAL RELEASE MEASURES (continued)
It is recommended:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
6.4Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1Precautions for safe handling:
A.-General precautions for safe use
Comply with the current legislation concerning the prevention of industrial risks with regards manually
handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).
B.-Technical recommendations for the prevention of fires and explosions
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of
storage, handling and use.
C.-Technical recommendations on general occupational hygiene
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.-Technical recommendations to prevent environmental risks
It is not necessary to take special measures to prevent environmental risks. For more information see
subsection 6.2
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
7.2Conditions for safe storage, including any incompatibilities:
A.-Technical measures for storage
Store in a cool, dry, well-ventilated location
B.-General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see
subsection 10.5
7.3Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding
the uses of this product.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1Control parameters:
Substances whose occupational exposure limits have to be monitored in the workplace:
Nuisance dust: Inhalable dust 10 mg/m3 // Respirable dust 4 mg/m3
DNEL (Workers):
Non-applicable
DNEL (General population):
Non-applicable
PNEC:
Non-applicable
8.2Exposure controls:
A.-Individual protection measures, such as personal protective equipment
As a preventative measure it is recommended to use basic Personal Protective Equipment, with the
corresponding <>. For more information on Personal Protective Equipment (storage, use,
cleaning, maintenance, class of protection, ) consult the information leaflet provided by the manufacturer. For
more information see subsection 7.1. All information contained herein is a recommendation which needs
some specification from the labour risk prevention services as it is not known whether the company has
additional measures at its disposal.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 3/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
B.-Respiratory protection
The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are
exceeded.
C.-Specific protection for the hands
Pictogram PPE Remarks
Mandatory hand
protection
Protective gloves against minor risks
Replace gloves in case of any sign of damage. For prolonged periods of
exposure to the product for professional users/industrials, we
recommend using CE III gloves in line with standards EN ISO
21420:2020 and EN ISO 374-1:2016+A1:2018
D.-Eye and face protection
Pictogram PPE Remarks
Mandatory face
protection
Panoramic glasses against
splash/projections.
Clean daily and disinfect periodically according to the manufacturer s
instructions. Use if there is a risk of splashing.
E.-Body protection
Pictogram PPE Remarks
Work clothing
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO 6529:2013,
EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994.
Anti-slip work shoes
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO
20345:2012 y EN 13832-1:2007
F.-Additional emergency measures
It is not necessary to take additional emergency measures.
Environmental exposure controls:
In accordance with the community legislation for the protection of the environment it is recommended to avoid
environmental spillage of both the product and its container. For additional information see subsection 7.1.D
The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations
2012:
V.O.C. (Supply): 0 % weight
V.O.C. density at 20 C: 0 kg/m (0 g/L)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1Information on basic physical and chemical properties:
For complete information see the product datasheet.
Appearance:
Physical state at 20 C: Solid
Appearance: Not available
Colour: Green
Odour: Not available
Odour threshold: Non-applicable *
Volatility:
Boiling point at atmospheric pressure: Non-applicable *
Vapour pressure at 20 C: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 4/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)
Vapour pressure at 50 C: Non-applicable *
Evaporation rate at 20 C: Non-applicable *
Product description:
Density at 20 C: ca. 700 kg/m
Relative density at 20 C: ca. 0.7
Dynamic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 40 C: Non-applicable *
Concentration: Non-applicable *
pH: Non-applicable *
Vapour density at 20 C: Non-applicable *
Partition coefficient n-octanol/water 20 C: Non-applicable *
Solubility in water at 20 C: Non-applicable *
Solubility properties: Non-applicable *
Decomposition temperature: Non-applicable *
Melting point/freezing point: Non-applicable *
Flammability:
Flash Point: Non-applicable
Flammability (solid, gas): Non-applicable *
Autoignition temperature: Non-applicable *
Lower flammability limit: Non-applicable *
Upper flammability limit: Non-applicable *
Explosive (Solid):
Lower explosive limit: Non-applicable *
Upper explosive limit: Non-applicable *
Particle characteristics:
Median equivalent diameter: Non-applicable *
9.2Other information:
Information with regard to physical hazard classes:
Explosive properties: Non-applicable *
Oxidising properties: Non-applicable *
Corrosive to metals: Non-applicable *
Heat of combustion: Non-applicable *
Aerosols-total percentage (by mass) of
flammable components:
Non-applicable *
Other safety characteristics:
Surface tension at 20 C: Non-applicable *
Refraction index: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY
10.1Reactivity:
No hazardous reactions are expected because the product is stable under recommended storage conditions. See
section 7 from Safety Data Sheet.
10.2Chemical stability:
Chemically stable under the indicated conditions of storage, handling and use.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 5/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 10: STABILITY AND REACTIVITY (continued)
10.3Possibility of hazardous reactions:
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not
expected.
10.4Conditions to avoid:
Applicable for handling and storage at room temperature:
Shock and friction Contact with air Increase in temperature Sunlight Humidity
Not applicable Not applicable Not applicable Not applicable Not applicable
10.5Incompatible materials:
Acids Water Oxidising materials Combustible materials Others
Avoid strong acids Not applicable Not applicable Not applicable
Avoid alkalis or strong
bases
10.6Hazardous decomposition products:
See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the
decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO ),
carbon monoxide and other organic compounds.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1Information on toxicological effects:
LD50 oral > 2000 mg/kg (rat)
Dangerous health implications:
In case of exposure that is repetitive, prolonged or at concentrations higher than the recommended occupational
exposure limits, adverse effects on health may result, depending on the means of exposure:
A-Ingestion (acute effect):
– Acute toxicity: Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
B-Inhalation (acute effect):
– Acute toxicity : Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
C-Contact with the skin and the eyes (acute effect):
– Contact with the skin: Based on available data, the classification criteria are not met
– Contact with the eyes: Based on available data, the classification criteria are not met
D-CMR effects (carcinogenicity, mutagenicity and toxicity to reproduction):
– Carcinogenicity: Based on available data, the classification criteria are not met
IARC: Non-applicable
– Mutagenicity: Based on available data, the classification criteria are not met
– Reproductive toxicity: Based on available data, the classification criteria are not met
E-Sensitizing effects:
– Respiratory: Based on available data, the classification criteria are not met
– Skin: Based on available data, the classification criteria are not met
F-Specific target organ toxicity (STOT) – single exposure:
Based on available data, the classification criteria are not met
G-Specific target organ toxicity (STOT)-repeated exposure:
– Specific target organ toxicity (STOT)-repeated exposure: Based on available data, the classification criteria
are not met
– Skin: Based on available data, the classification criteria are not met, as it does not contain substances
classified as hazardous for this effect. For more information see section 3.
H-Aspiration hazard:
Based on available data, the classification criteria are not met
Other information:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 6/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 11: TOXICOLOGICAL INFORMATION (continued)
Non-applicable
Specific toxicology information on the substances:
Not available
SECTION 12: ECOLOGICAL INFORMATION
The experimental information related to the eco-toxicological properties of the product itself is not available
Based on available data, the classification criteria are not met
12.1Toxicity:
Not available
12.2Persistence and degradability:
Not available
12.3Bioaccumulative potential:
Not available
12.4Mobility in soil:
Not available
12.5Results of PBT and vPvB assessment:
Product does not meet PBT/vPvB criteria
12.6Other adverse effects:
Not described
SECTION 13: DISPOSAL CONSIDERATIONS
13.1Waste treatment methods:
Code Description Waste class
It is not possible to assign a specific code, as it depends on the intended use by the
user
Non dangerous
Type of waste:
Non-applicable
Waste management (disposal and evaluation):
Consult the authorized waste service manager on the assessment and disposal operations in accordance The
Waste Regulations 2011, 2011 No. 988. As under 15 01 of the code and in case the container has been in direct
contact with the product, it will be processed the same way as the actual product. Otherwise, it will be processed
as non-dangerous residue. Waste should not be disposed of to drains. See paragraph 6.2.
Regulations related to waste management:
In accordance with Annex II of UK REACH the provisions related to waste management are stated:
UK legislation: The Waste Regulations 2011.
SECTION 14: TRANSPORT INFORMATION
This product is not regulated for transport (ADR/RID,IMDG,IATA)
SECTION 15: REGULATORY INFORMATION
15.1Safety, health and environmental regulations/legislation specific for the substance or mixture:
– Substances listed in UK candidate list of substances of very high concern (SVHCs): Non-applicable
– Substances listed in UK REACH Authorisation List (Annex 14): Non-applicable
The Control of Major Accident Hazards Regulations 2015:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 7/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 15: REGULATORY INFORMATION (continued)
Non-applicable
Restrictions to commercialisation and the use of certain dangerous substances and mixtures (Annex
XVII UK REACH, etc .):
Non-applicable
Specific provisions in terms of protecting people or the environment:
It is recommended to use the information included in this safety data sheet as a basis for conducting workplace-
specific risk assessments in order to establish the necessary risk prevention measures for the handling, use,
storage and disposal of this product.
Other legislation:
The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020.
The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU
Exit) Regulations 2020.
Control of Substances Hazardous to Health Regulations 2002 (as amended)
EH40/2005 Workplace exposure limits.
SECTION 16: OTHER INFORMATION
Legislation related to safety data sheets:
This safety data sheet has been designed in accordance with ANNEX II-The REACH etc. (Amendment etc.) (EU
Exit) Regulations 2020.
Texts of the legislative phrases mentioned in section 3:
The phrases indicated do not refer to the product itself; they are present merely for informative purposes and
refer to the individual components which appear in section 3
GB CLP Regulation:
Non-applicable
Advice related to training:
Training is recommended in order to prevent industrial risks for staff using this product and to facilitate their
comprehension and interpretation of this safety data sheet, as well as the label on the product.
Principal bibliographical sources:
http://echa.europa.eu
http://eur-lex.europa.eu
Abbreviations and acronyms:
ADR: European agreement concerning the international carriage of dangerous goods by road
IMDG: International maritime dangerous goods code
IATA: International Air Transport Association
ICAO: International Civil Aviation Organisation
COD: Chemical Oxygen Demand
BOD5: 5day biochemical oxygen demand
BCF: Bioconcentration factor
LD50: Lethal Dose 50
LC50: Lethal Concentration 50
EC50: Effective concentration 50
LogPOW: Octanolwater partition coefficient
Koc: Partition coefficient of organic carbon
UFI: unique formula identifier
IARC: International Agency for Research on Cancer
Theinformationcontainedinthissafetydatasheetisbasedonsources,technicalknowledgeandcurrentlegislationatUK,withoutbeingabletoguaranteeitsaccuracy.
Thisinformationcannotbeconsideredaguaranteeofthepropertiesoftheproduct,itissimplyadescriptionofthesecurityrequirements.Theoccupationalmethodology
andconditionsforusersofthisproductarenotwithinourawarenessorcontrol,anditisultimatelytheresponsibilityoftheusertotakethenecessarymeasurestoobtain
thelegalrequirementsconcerningthemanipulation,storage,useanddisposalofchemicalproducts.Theinformationonthissafetydatasheetonlyreferstothisproduct,
whichshouldnotbeusedforneedsotherthanthosespecified.
– END OF SAFETY DATA SHEET –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 8/8
by | Sep 27, 2025
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1Product identifier: BE769 – Epoxy Tooling Board
Not a hazardous substance
CAS: Non-applicable
Other means of identification:
Non-applicable
1.2Relevant identified uses of the substance or mixture and uses advised against:
Relevant uses: Non Hazardous Substance . For industrial user only.
Uses advised against: All uses not specified in this section or in section 7.3
1.3Details of the supplier of the safety data sheet:
Base Materials
Base Materials Ltd,20 Ashville Way
LE8 6NU Leicester – Whetstone – United Kingdom
Phone: 0116 286 5073
sales@base-materials.com
https://www.base-materials.com/
1.4Emergency telephone number: Ecostar Environmental – Reference Code: EREF-00111 : Telephone: +44 800
246 1972 (office hours), WhatsApp: +44 7496 228 905 (office hours), 24/7
Service +44 800 246 1274
SECTION 2: HAZARDS IDENTIFICATION
2.1Classification of the substance or mixture:
When milling: Dust will be produced
GB CLP Regulation:
The product is not classified as hazardous according to GB CLP Regulation.
2.2Label elements:
GB CLP Regulation:
None
2.3Other hazards:
Product does not meet PBT/vPvB criteria
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1Substance:
Chemical description: Epoxides
Components:
In accordance with Annex II of The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020, the product
contains:
Identification Chemical name/Classification
Concentratio
n
CAS:Non-applicable
Not a hazardous substance
100 %
To obtain more information on the hazards of the substances consult sections 11, 12 and 16.
3.2Mixture:
Non-applicable
Reaction product based on epoxy
SECTION 4: FIRST AID MEASURES
4.1Description of first aid measures:
Consult a doctor in case of discomfort showing the SDS for the product.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 1/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 4: FIRST AID MEASURES (continued)
By inhalation:
In case of symptoms, move the person affected into fresh air.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case
of changes to the skin (stinging, redness, rashes, blisters, ), seek medical advice with this Safety Data Sheet
By eye contact:
Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS
for the product.
By ingestion/aspiration:
In case of consumption in large quantities, it is recommended to seek medical assistance.
Dust: Provide fresh air.
4.2Most important symptoms and effects, both acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3Indication of any immediate medical attention and special treatment needed:
Non-applicable
SECTION 5: FIREFIGHTING MEASURES
5.1Extinguishing media:
Suitable extinguishing media:
Product is non-flammable, with a low risk of fire due to the flammability characteristics of the product in normal
conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of
improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,…)
Unsuitable extinguishing media:
Non-applicable
5.2Special hazards arising from the substance or mixture:
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of storage,
handling and use.
5.3Advice for firefighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained
breathing apparatus (SCBA). Minimum emergency facilities and equipment should be available (fire blankets,
portable first aid kit,…).
Additional provisions:
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an
accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and
tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures. Avoid spillage
of the products used to extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1Personal precautions, protective equipment and emergency procedures:
For non-emergency personnel:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
For emergency responders:
Wear protective equipment. Keep unprotected persons away. See section 8.
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
6.2Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and
ground water.
6.3Methods and material for containment and cleaning up:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 2/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 6: ACCIDENTAL RELEASE MEASURES (continued)
It is recommended:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
6.4Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1Precautions for safe handling:
A.-General precautions for safe use
Comply with the current legislation concerning the prevention of industrial risks with regards manually
handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).
B.-Technical recommendations for the prevention of fires and explosions
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of
storage, handling and use.
C.-Technical recommendations on general occupational hygiene
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.-Technical recommendations to prevent environmental risks
It is not necessary to take special measures to prevent environmental risks. For more information see
subsection 6.2
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
7.2Conditions for safe storage, including any incompatibilities:
A.-Technical measures for storage
Store in a cool, dry, well-ventilated location
B.-General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see
subsection 10.5
7.3Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding
the uses of this product.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1Control parameters:
Substances whose occupational exposure limits have to be monitored in the workplace:
Nuisance dust: Inhalable dust 10 mg/m3 // Respirable dust 4 mg/m3
DNEL (Workers):
Non-applicable
DNEL (General population):
Non-applicable
PNEC:
Non-applicable
8.2Exposure controls:
A.-Individual protection measures, such as personal protective equipment
As a preventative measure it is recommended to use basic Personal Protective Equipment, with the
corresponding <>. For more information on Personal Protective Equipment (storage, use,
cleaning, maintenance, class of protection, ) consult the information leaflet provided by the manufacturer. For
more information see subsection 7.1. All information contained herein is a recommendation which needs
some specification from the labour risk prevention services as it is not known whether the company has
additional measures at its disposal.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 3/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
B.-Respiratory protection
The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are
exceeded.
C.-Specific protection for the hands
Pictogram PPE Remarks
Mandatory hand
protection
Protective gloves against minor risks
Replace gloves in case of any sign of damage. For prolonged periods of
exposure to the product for professional users/industrials, we
recommend using CE III gloves in line with standards EN ISO
21420:2020 and EN ISO 374-1:2016+A1:2018
D.-Eye and face protection
Pictogram PPE Remarks
Mandatory face
protection
Panoramic glasses against
splash/projections.
Clean daily and disinfect periodically according to the manufacturer s
instructions. Use if there is a risk of splashing.
E.-Body protection
Pictogram PPE Remarks
Work clothing
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO 6529:2013,
EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994.
Anti-slip work shoes
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO
20345:2012 y EN 13832-1:2007
F.-Additional emergency measures
It is not necessary to take additional emergency measures.
Environmental exposure controls:
In accordance with the community legislation for the protection of the environment it is recommended to avoid
environmental spillage of both the product and its container. For additional information see subsection 7.1.D
The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations
2012:
V.O.C. (Supply): 0 % weight
V.O.C. density at 20 C: 0 kg/m (0 g/L)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1Information on basic physical and chemical properties:
For complete information see the product datasheet.
Appearance:
Physical state at 20 C: Solid
Appearance: Not available
Colour: Green
Odour: Not available
Odour threshold: Non-applicable *
Volatility:
Boiling point at atmospheric pressure: Non-applicable *
Vapour pressure at 20 C: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 4/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)
Vapour pressure at 50 C: Non-applicable *
Evaporation rate at 20 C: Non-applicable *
Product description:
Density at 20 C: ca. 700 kg/m
Relative density at 20 C: ca. 0.7
Dynamic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 40 C: Non-applicable *
Concentration: Non-applicable *
pH: Non-applicable *
Vapour density at 20 C: Non-applicable *
Partition coefficient n-octanol/water 20 C: Non-applicable *
Solubility in water at 20 C: Non-applicable *
Solubility properties: Non-applicable *
Decomposition temperature: Non-applicable *
Melting point/freezing point: Non-applicable *
Flammability:
Flash Point: Non-applicable
Flammability (solid, gas): Non-applicable *
Autoignition temperature: Non-applicable *
Lower flammability limit: Non-applicable *
Upper flammability limit: Non-applicable *
Explosive (Solid):
Lower explosive limit: Non-applicable *
Upper explosive limit: Non-applicable *
Particle characteristics:
Median equivalent diameter: Non-applicable *
9.2Other information:
Information with regard to physical hazard classes:
Explosive properties: Non-applicable *
Oxidising properties: Non-applicable *
Corrosive to metals: Non-applicable *
Heat of combustion: Non-applicable *
Aerosols-total percentage (by mass) of
flammable components:
Non-applicable *
Other safety characteristics:
Surface tension at 20 C: Non-applicable *
Refraction index: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY
10.1Reactivity:
No hazardous reactions are expected because the product is stable under recommended storage conditions. See
section 7 from Safety Data Sheet.
10.2Chemical stability:
Chemically stable under the indicated conditions of storage, handling and use.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 5/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 10: STABILITY AND REACTIVITY (continued)
10.3Possibility of hazardous reactions:
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not
expected.
10.4Conditions to avoid:
Applicable for handling and storage at room temperature:
Shock and friction Contact with air Increase in temperature Sunlight Humidity
Not applicable Not applicable Not applicable Not applicable Not applicable
10.5Incompatible materials:
Acids Water Oxidising materials Combustible materials Others
Avoid strong acids Not applicable Not applicable Not applicable
Avoid alkalis or strong
bases
10.6Hazardous decomposition products:
See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the
decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO ),
carbon monoxide and other organic compounds.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1Information on toxicological effects:
LD50 oral > 2000 mg/kg (rat)
Dangerous health implications:
In case of exposure that is repetitive, prolonged or at concentrations higher than the recommended occupational
exposure limits, adverse effects on health may result, depending on the means of exposure:
A-Ingestion (acute effect):
– Acute toxicity: Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
B-Inhalation (acute effect):
– Acute toxicity : Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
C-Contact with the skin and the eyes (acute effect):
– Contact with the skin: Based on available data, the classification criteria are not met
– Contact with the eyes: Based on available data, the classification criteria are not met
D-CMR effects (carcinogenicity, mutagenicity and toxicity to reproduction):
– Carcinogenicity: Based on available data, the classification criteria are not met
IARC: Non-applicable
– Mutagenicity: Based on available data, the classification criteria are not met
– Reproductive toxicity: Based on available data, the classification criteria are not met
E-Sensitizing effects:
– Respiratory: Based on available data, the classification criteria are not met
– Skin: Based on available data, the classification criteria are not met
F-Specific target organ toxicity (STOT) – single exposure:
Based on available data, the classification criteria are not met
G-Specific target organ toxicity (STOT)-repeated exposure:
– Specific target organ toxicity (STOT)-repeated exposure: Based on available data, the classification criteria
are not met
– Skin: Based on available data, the classification criteria are not met, as it does not contain substances
classified as hazardous for this effect. For more information see section 3.
H-Aspiration hazard:
Based on available data, the classification criteria are not met
Other information:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 6/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 11: TOXICOLOGICAL INFORMATION (continued)
Non-applicable
Specific toxicology information on the substances:
Not available
SECTION 12: ECOLOGICAL INFORMATION
The experimental information related to the eco-toxicological properties of the product itself is not available
Based on available data, the classification criteria are not met
12.1Toxicity:
Not available
12.2Persistence and degradability:
Not available
12.3Bioaccumulative potential:
Not available
12.4Mobility in soil:
Not available
12.5Results of PBT and vPvB assessment:
Product does not meet PBT/vPvB criteria
12.6Other adverse effects:
Not described
SECTION 13: DISPOSAL CONSIDERATIONS
13.1Waste treatment methods:
Code Description Waste class
It is not possible to assign a specific code, as it depends on the intended use by the
user
Non dangerous
Type of waste:
Non-applicable
Waste management (disposal and evaluation):
Consult the authorized waste service manager on the assessment and disposal operations in accordance The
Waste Regulations 2011, 2011 No. 988. As under 15 01 of the code and in case the container has been in direct
contact with the product, it will be processed the same way as the actual product. Otherwise, it will be processed
as non-dangerous residue. Waste should not be disposed of to drains. See paragraph 6.2.
Regulations related to waste management:
In accordance with Annex II of UK REACH the provisions related to waste management are stated:
UK legislation: The Waste Regulations 2011.
SECTION 14: TRANSPORT INFORMATION
This product is not regulated for transport (ADR/RID,IMDG,IATA)
SECTION 15: REGULATORY INFORMATION
15.1Safety, health and environmental regulations/legislation specific for the substance or mixture:
– Substances listed in UK candidate list of substances of very high concern (SVHCs): Non-applicable
– Substances listed in UK REACH Authorisation List (Annex 14): Non-applicable
The Control of Major Accident Hazards Regulations 2015:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 7/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 15: REGULATORY INFORMATION (continued)
Non-applicable
Restrictions to commercialisation and the use of certain dangerous substances and mixtures (Annex
XVII UK REACH, etc .):
Non-applicable
Specific provisions in terms of protecting people or the environment:
It is recommended to use the information included in this safety data sheet as a basis for conducting workplace-
specific risk assessments in order to establish the necessary risk prevention measures for the handling, use,
storage and disposal of this product.
Other legislation:
The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020.
The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU
Exit) Regulations 2020.
Control of Substances Hazardous to Health Regulations 2002 (as amended)
EH40/2005 Workplace exposure limits.
SECTION 16: OTHER INFORMATION
Legislation related to safety data sheets:
This safety data sheet has been designed in accordance with ANNEX II-The REACH etc. (Amendment etc.) (EU
Exit) Regulations 2020.
Texts of the legislative phrases mentioned in section 3:
The phrases indicated do not refer to the product itself; they are present merely for informative purposes and
refer to the individual components which appear in section 3
GB CLP Regulation:
Non-applicable
Advice related to training:
Training is recommended in order to prevent industrial risks for staff using this product and to facilitate their
comprehension and interpretation of this safety data sheet, as well as the label on the product.
Principal bibliographical sources:
http://echa.europa.eu
http://eur-lex.europa.eu
Abbreviations and acronyms:
ADR: European agreement concerning the international carriage of dangerous goods by road
IMDG: International maritime dangerous goods code
IATA: International Air Transport Association
ICAO: International Civil Aviation Organisation
COD: Chemical Oxygen Demand
BOD5: 5day biochemical oxygen demand
BCF: Bioconcentration factor
LD50: Lethal Dose 50
LC50: Lethal Concentration 50
EC50: Effective concentration 50
LogPOW: Octanolwater partition coefficient
Koc: Partition coefficient of organic carbon
UFI: unique formula identifier
IARC: International Agency for Research on Cancer
Theinformationcontainedinthissafetydatasheetisbasedonsources,technicalknowledgeandcurrentlegislationatUK,withoutbeingabletoguaranteeitsaccuracy.
Thisinformationcannotbeconsideredaguaranteeofthepropertiesoftheproduct,itissimplyadescriptionofthesecurityrequirements.Theoccupationalmethodology
andconditionsforusersofthisproductarenotwithinourawarenessorcontrol,anditisultimatelytheresponsibilityoftheusertotakethenecessarymeasurestoobtain
thelegalrequirementsconcerningthemanipulation,storage,useanddisposalofchemicalproducts.Theinformationonthissafetydatasheetonlyreferstothisproduct,
whichshouldnotbeusedforneedsotherthanthosespecified.
– END OF SAFETY DATA SHEET –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 8/8
by | Sep 27, 2025
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.1Product identifier: BE769 – Epoxy Tooling Board
Not a hazardous substance
CAS: Non-applicable
Other means of identification:
Non-applicable
1.2Relevant identified uses of the substance or mixture and uses advised against:
Relevant uses: Non Hazardous Substance . For industrial user only.
Uses advised against: All uses not specified in this section or in section 7.3
1.3Details of the supplier of the safety data sheet:
Base Materials
Base Materials Ltd,20 Ashville Way
LE8 6NU Leicester – Whetstone – United Kingdom
Phone: 0116 286 5073
sales@base-materials.com
https://www.base-materials.com/
1.4Emergency telephone number: Ecostar Environmental – Reference Code: EREF-00111 : Telephone: +44 800
246 1972 (office hours), WhatsApp: +44 7496 228 905 (office hours), 24/7
Service +44 800 246 1274
SECTION 2: HAZARDS IDENTIFICATION
2.1Classification of the substance or mixture:
When milling: Dust will be produced
GB CLP Regulation:
The product is not classified as hazardous according to GB CLP Regulation.
2.2Label elements:
GB CLP Regulation:
None
2.3Other hazards:
Product does not meet PBT/vPvB criteria
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
3.1Substance:
Chemical description: Epoxides
Components:
In accordance with Annex II of The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020, the product
contains:
Identification Chemical name/Classification
Concentratio
n
CAS:Non-applicable
Not a hazardous substance
100 %
To obtain more information on the hazards of the substances consult sections 11, 12 and 16.
3.2Mixture:
Non-applicable
Reaction product based on epoxy
SECTION 4: FIRST AID MEASURES
4.1Description of first aid measures:
Consult a doctor in case of discomfort showing the SDS for the product.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 1/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 4: FIRST AID MEASURES (continued)
By inhalation:
In case of symptoms, move the person affected into fresh air.
By skin contact:
In case of contact it is recommended to clean the affected area thoroughly with water and neutral soap. In case
of changes to the skin (stinging, redness, rashes, blisters, ), seek medical advice with this Safety Data Sheet
By eye contact:
Rinse with water until the product has been eliminated. In case of problems, consult a doctor showing the SDS
for the product.
By ingestion/aspiration:
In case of consumption in large quantities, it is recommended to seek medical assistance.
Dust: Provide fresh air.
4.2Most important symptoms and effects, both acute and delayed:
Acute and delayed effects are indicated in sections 2 and 11.
4.3Indication of any immediate medical attention and special treatment needed:
Non-applicable
SECTION 5: FIREFIGHTING MEASURES
5.1Extinguishing media:
Suitable extinguishing media:
Product is non-flammable, with a low risk of fire due to the flammability characteristics of the product in normal
conditions of storage, handling and use. In the case of the existence of sustained combustion as a result of
improper handling, storage or use any type of extinguishing agent can be used (ABC Powder, water,…)
Unsuitable extinguishing media:
Non-applicable
5.2Special hazards arising from the substance or mixture:
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of storage,
handling and use.
5.3Advice for firefighters:
Depending on the magnitude of the fire it may be necessary to use full protective clothing and self-contained
breathing apparatus (SCBA). Minimum emergency facilities and equipment should be available (fire blankets,
portable first aid kit,…).
Additional provisions:
Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an
accident or other emergencies. Eliminate all sources of ignition. In case of fire, cool the storage containers and
tanks for products susceptible to combustion, explosion or BLEVE as a result of high temperatures. Avoid spillage
of the products used to extinguish the fire into an aqueous medium.
SECTION 6: ACCIDENTAL RELEASE MEASURES
6.1Personal precautions, protective equipment and emergency procedures:
For non-emergency personnel:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
For emergency responders:
Wear protective equipment. Keep unprotected persons away. See section 8.
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
6.2Environmental precautions:
This product is not classified as hazardous to the environment. Keep product away from drains, surface and
ground water.
6.3Methods and material for containment and cleaning up:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 2/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 6: ACCIDENTAL RELEASE MEASURES (continued)
It is recommended:
Sweep up and shovel product or collect by other means and place in container for reuse (preferred) or disposal
6.4Reference to other sections:
See sections 8 and 13.
SECTION 7: HANDLING AND STORAGE
7.1Precautions for safe handling:
A.-General precautions for safe use
Comply with the current legislation concerning the prevention of industrial risks with regards manually
handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).
B.-Technical recommendations for the prevention of fires and explosions
Due to its non-inflammable nature, the product does not present a fire risk under normal conditions of
storage, handling and use.
C.-Technical recommendations on general occupational hygiene
Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.
D.-Technical recommendations to prevent environmental risks
It is not necessary to take special measures to prevent environmental risks. For more information see
subsection 6.2
Other information:
May form combustible dust concentrations in air. Keep away from sources of ignition – No smoking.
7.2Conditions for safe storage, including any incompatibilities:
A.-Technical measures for storage
Store in a cool, dry, well-ventilated location
B.-General conditions for storage
Avoid sources of heat, radiation, static electricity and contact with food. For additional information see
subsection 10.5
7.3Specific end use(s):
Except for the instructions already specified it is not necessary to provide any special recommendation regarding
the uses of this product.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1Control parameters:
Substances whose occupational exposure limits have to be monitored in the workplace:
Nuisance dust: Inhalable dust 10 mg/m3 // Respirable dust 4 mg/m3
DNEL (Workers):
Non-applicable
DNEL (General population):
Non-applicable
PNEC:
Non-applicable
8.2Exposure controls:
A.-Individual protection measures, such as personal protective equipment
As a preventative measure it is recommended to use basic Personal Protective Equipment, with the
corresponding <>. For more information on Personal Protective Equipment (storage, use,
cleaning, maintenance, class of protection, ) consult the information leaflet provided by the manufacturer. For
more information see subsection 7.1. All information contained herein is a recommendation which needs
some specification from the labour risk prevention services as it is not known whether the company has
additional measures at its disposal.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 3/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
B.-Respiratory protection
The use of protection equipment will be necessary if a mist forms or if the occupational exposure limits are
exceeded.
C.-Specific protection for the hands
Pictogram PPE Remarks
Mandatory hand
protection
Protective gloves against minor risks
Replace gloves in case of any sign of damage. For prolonged periods of
exposure to the product for professional users/industrials, we
recommend using CE III gloves in line with standards EN ISO
21420:2020 and EN ISO 374-1:2016+A1:2018
D.-Eye and face protection
Pictogram PPE Remarks
Mandatory face
protection
Panoramic glasses against
splash/projections.
Clean daily and disinfect periodically according to the manufacturer s
instructions. Use if there is a risk of splashing.
E.-Body protection
Pictogram PPE Remarks
Work clothing
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO 6529:2013,
EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994.
Anti-slip work shoes
Replace before any evidence of deterioration. For periods of prolonged
exposure to the product for professional/industrial users CE III is
recommended, in accordance with the regulations in EN ISO
20345:2012 y EN 13832-1:2007
F.-Additional emergency measures
It is not necessary to take additional emergency measures.
Environmental exposure controls:
In accordance with the community legislation for the protection of the environment it is recommended to avoid
environmental spillage of both the product and its container. For additional information see subsection 7.1.D
The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations
2012:
V.O.C. (Supply): 0 % weight
V.O.C. density at 20 C: 0 kg/m (0 g/L)
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
9.1Information on basic physical and chemical properties:
For complete information see the product datasheet.
Appearance:
Physical state at 20 C: Solid
Appearance: Not available
Colour: Green
Odour: Not available
Odour threshold: Non-applicable *
Volatility:
Boiling point at atmospheric pressure: Non-applicable *
Vapour pressure at 20 C: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 4/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)
Vapour pressure at 50 C: Non-applicable *
Evaporation rate at 20 C: Non-applicable *
Product description:
Density at 20 C: ca. 700 kg/m
Relative density at 20 C: ca. 0.7
Dynamic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 20 C: Non-applicable *
Kinematic viscosity at 40 C: Non-applicable *
Concentration: Non-applicable *
pH: Non-applicable *
Vapour density at 20 C: Non-applicable *
Partition coefficient n-octanol/water 20 C: Non-applicable *
Solubility in water at 20 C: Non-applicable *
Solubility properties: Non-applicable *
Decomposition temperature: Non-applicable *
Melting point/freezing point: Non-applicable *
Flammability:
Flash Point: Non-applicable
Flammability (solid, gas): Non-applicable *
Autoignition temperature: Non-applicable *
Lower flammability limit: Non-applicable *
Upper flammability limit: Non-applicable *
Explosive (Solid):
Lower explosive limit: Non-applicable *
Upper explosive limit: Non-applicable *
Particle characteristics:
Median equivalent diameter: Non-applicable *
9.2Other information:
Information with regard to physical hazard classes:
Explosive properties: Non-applicable *
Oxidising properties: Non-applicable *
Corrosive to metals: Non-applicable *
Heat of combustion: Non-applicable *
Aerosols-total percentage (by mass) of
flammable components:
Non-applicable *
Other safety characteristics:
Surface tension at 20 C: Non-applicable *
Refraction index: Non-applicable *
*Not relevant due to the nature of the product, not providing information property of its hazards.
SECTION 10: STABILITY AND REACTIVITY
10.1Reactivity:
No hazardous reactions are expected because the product is stable under recommended storage conditions. See
section 7 from Safety Data Sheet.
10.2Chemical stability:
Chemically stable under the indicated conditions of storage, handling and use.
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 5/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 10: STABILITY AND REACTIVITY (continued)
10.3Possibility of hazardous reactions:
Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not
expected.
10.4Conditions to avoid:
Applicable for handling and storage at room temperature:
Shock and friction Contact with air Increase in temperature Sunlight Humidity
Not applicable Not applicable Not applicable Not applicable Not applicable
10.5Incompatible materials:
Acids Water Oxidising materials Combustible materials Others
Avoid strong acids Not applicable Not applicable Not applicable
Avoid alkalis or strong
bases
10.6Hazardous decomposition products:
See subsection 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the
decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO ),
carbon monoxide and other organic compounds.
SECTION 11: TOXICOLOGICAL INFORMATION
11.1Information on toxicological effects:
LD50 oral > 2000 mg/kg (rat)
Dangerous health implications:
In case of exposure that is repetitive, prolonged or at concentrations higher than the recommended occupational
exposure limits, adverse effects on health may result, depending on the means of exposure:
A-Ingestion (acute effect):
– Acute toxicity: Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
B-Inhalation (acute effect):
– Acute toxicity : Based on available data, the classification criteria are not met
– Corrosivity/Irritability: Based on available data, the classification criteria are not met
C-Contact with the skin and the eyes (acute effect):
– Contact with the skin: Based on available data, the classification criteria are not met
– Contact with the eyes: Based on available data, the classification criteria are not met
D-CMR effects (carcinogenicity, mutagenicity and toxicity to reproduction):
– Carcinogenicity: Based on available data, the classification criteria are not met
IARC: Non-applicable
– Mutagenicity: Based on available data, the classification criteria are not met
– Reproductive toxicity: Based on available data, the classification criteria are not met
E-Sensitizing effects:
– Respiratory: Based on available data, the classification criteria are not met
– Skin: Based on available data, the classification criteria are not met
F-Specific target organ toxicity (STOT) – single exposure:
Based on available data, the classification criteria are not met
G-Specific target organ toxicity (STOT)-repeated exposure:
– Specific target organ toxicity (STOT)-repeated exposure: Based on available data, the classification criteria
are not met
– Skin: Based on available data, the classification criteria are not met, as it does not contain substances
classified as hazardous for this effect. For more information see section 3.
H-Aspiration hazard:
Based on available data, the classification criteria are not met
Other information:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 6/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 11: TOXICOLOGICAL INFORMATION (continued)
Non-applicable
Specific toxicology information on the substances:
Not available
SECTION 12: ECOLOGICAL INFORMATION
The experimental information related to the eco-toxicological properties of the product itself is not available
Based on available data, the classification criteria are not met
12.1Toxicity:
Not available
12.2Persistence and degradability:
Not available
12.3Bioaccumulative potential:
Not available
12.4Mobility in soil:
Not available
12.5Results of PBT and vPvB assessment:
Product does not meet PBT/vPvB criteria
12.6Other adverse effects:
Not described
SECTION 13: DISPOSAL CONSIDERATIONS
13.1Waste treatment methods:
Code Description Waste class
It is not possible to assign a specific code, as it depends on the intended use by the
user
Non dangerous
Type of waste:
Non-applicable
Waste management (disposal and evaluation):
Consult the authorized waste service manager on the assessment and disposal operations in accordance The
Waste Regulations 2011, 2011 No. 988. As under 15 01 of the code and in case the container has been in direct
contact with the product, it will be processed the same way as the actual product. Otherwise, it will be processed
as non-dangerous residue. Waste should not be disposed of to drains. See paragraph 6.2.
Regulations related to waste management:
In accordance with Annex II of UK REACH the provisions related to waste management are stated:
UK legislation: The Waste Regulations 2011.
SECTION 14: TRANSPORT INFORMATION
This product is not regulated for transport (ADR/RID,IMDG,IATA)
SECTION 15: REGULATORY INFORMATION
15.1Safety, health and environmental regulations/legislation specific for the substance or mixture:
– Substances listed in UK candidate list of substances of very high concern (SVHCs): Non-applicable
– Substances listed in UK REACH Authorisation List (Annex 14): Non-applicable
The Control of Major Accident Hazards Regulations 2015:
– CONTINUED ON NEXT PAGE –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 7/8
BE769 – Epoxy Tooling Board
Safety data sheet
According to UK REACH
SECTION 15: REGULATORY INFORMATION (continued)
Non-applicable
Restrictions to commercialisation and the use of certain dangerous substances and mixtures (Annex
XVII UK REACH, etc .):
Non-applicable
Specific provisions in terms of protecting people or the environment:
It is recommended to use the information included in this safety data sheet as a basis for conducting workplace-
specific risk assessments in order to establish the necessary risk prevention measures for the handling, use,
storage and disposal of this product.
Other legislation:
The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020.
The Chemicals (Health and Safety) and Genetically Modified Organisms (Contained Use) (Amendment etc.) (EU
Exit) Regulations 2020.
Control of Substances Hazardous to Health Regulations 2002 (as amended)
EH40/2005 Workplace exposure limits.
SECTION 16: OTHER INFORMATION
Legislation related to safety data sheets:
This safety data sheet has been designed in accordance with ANNEX II-The REACH etc. (Amendment etc.) (EU
Exit) Regulations 2020.
Texts of the legislative phrases mentioned in section 3:
The phrases indicated do not refer to the product itself; they are present merely for informative purposes and
refer to the individual components which appear in section 3
GB CLP Regulation:
Non-applicable
Advice related to training:
Training is recommended in order to prevent industrial risks for staff using this product and to facilitate their
comprehension and interpretation of this safety data sheet, as well as the label on the product.
Principal bibliographical sources:
http://echa.europa.eu
http://eur-lex.europa.eu
Abbreviations and acronyms:
ADR: European agreement concerning the international carriage of dangerous goods by road
IMDG: International maritime dangerous goods code
IATA: International Air Transport Association
ICAO: International Civil Aviation Organisation
COD: Chemical Oxygen Demand
BOD5: 5day biochemical oxygen demand
BCF: Bioconcentration factor
LD50: Lethal Dose 50
LC50: Lethal Concentration 50
EC50: Effective concentration 50
LogPOW: Octanolwater partition coefficient
Koc: Partition coefficient of organic carbon
UFI: unique formula identifier
IARC: International Agency for Research on Cancer
Theinformationcontainedinthissafetydatasheetisbasedonsources,technicalknowledgeandcurrentlegislationatUK,withoutbeingabletoguaranteeitsaccuracy.
Thisinformationcannotbeconsideredaguaranteeofthepropertiesoftheproduct,itissimplyadescriptionofthesecurityrequirements.Theoccupationalmethodology
andconditionsforusersofthisproductarenotwithinourawarenessorcontrol,anditisultimatelytheresponsibilityoftheusertotakethenecessarymeasurestoobtain
thelegalrequirementsconcerningthemanipulation,storage,useanddisposalofchemicalproducts.Theinformationonthissafetydatasheetonlyreferstothisproduct,
whichshouldnotbeusedforneedsotherthanthosespecified.
– END OF SAFETY DATA SHEET –
Date of compilation: 14/03/2023 Revised: 09/10/2023 Version: 7 (Replaced 6) Page 8/8
by | Sep 27, 2025
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
1 / 8
SECTION 1. IDENTIFICATION
Product name : SikaBlock M600 N
Company name : Sika Corporation
201 Polito Avenue
Lyndhurst, NJ 07071
USA
www.sikausa.com
Telephone : (201) 933-8800
Telefax : (201) 804-1076
E-mail address : ehs@sika-corp.com
Emergency telephone : CHEMTREC: 800-424-9300
INTERNATIONAL: +1-703-527-3887
Recommended use of the
chemical and restrictions on
use
: For further information, refer to product data sheet.
SECTION 2. HAZARDS IDENTIFICATION
GHS classification in accordance with the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Combustible dust
GHS label elements
Signal Word
: Warning
Hazard Statements
: If small particles are generated during further processing, han-
dling or by other means, may form combustible dust concentra- tions in air.
Additional Labeling
There are no ingredients with unknown acute toxicity used in a mixture at a concentration >= 1%.
Other hazards
None known.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
2 / 8
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Mixtures
Components
No hazardous ingredients
SECTION 4. FIRST AID MEASURES
General advice : No hazards which require special first aid measures.
If inhaled : Move to fresh air.
In case of skin contact : Take off contaminated clothing and shoes immediately.
Wash off with soap and plenty of water.
In case of eye contact : Flush eyes with water as a precaution.
Remove contact lenses.
Keep eye wide open while rinsing.
If swallowed : Clean mouth with water and drink afterwards plenty of water.
Do not induce vomiting without medical advice.
Do not give milk or alcoholic beverages.
Never give anything by mouth to an unconscious person.
Most important symptoms
and effects, both acute and
delayed
: No known significant effects or hazards.
No information available.
Notes to physician : Treat symptomatically.
SECTION 5. FIRE-FIGHTING MEASURES
Suitable extinguishing media : Use extinguishing measures that are appropriate to local cir-
cumstances and the surrounding environment.
Further information : Collect contaminated fire extinguishing water separately. This
must not be discharged into drains.
Fire residues and contaminated fire extinguishing water must
be disposed of in accordance with local regulations.
Special protective equipment
for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
SECTION 6. ACCIDENTAL RELEASE MEASURES
Environmental precautions
: Local authorities should be advised if significant spillages
cannot be contained.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
3 / 8
Methods and materials for
containment and cleaning up
: Keep in suitable, closed containers for disposal.
SECTION 7. HANDLING AND STORAGE
Advice on protection against
fire and explosion
: Normal measures for preventive fire protection.
Advice on safe handling : For personal protection see section 8.
No special handling advice required.
Follow standard hygiene measures when handling chemical
products.
Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated
place.
Store in accordance with local regulations.
Materials to avoid : No special restrictions on storage with other products.
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Engineering measures : Use of adequate ventilation should be sufficient to control
worker exposure to airborne contaminants. If the use of this
product generates dust, fumes, gas, vapor or mist, use pro-
cess enclosures, local exhaust ventilation or other engineer-
ing controls to keep worker exposure below any recommend-
ed or statutory limits.
Personal protective equipment
Respiratory protection : Use a properly fitted NIOSH approved air-purifying or air-fed
respirator complying with an approved standard if a risk as-
sessment indicates this is necessary.
The filter class for the respirator must be suitable for the max- imum expected contaminant concentration
(gas/vapor/aerosol/particulates) that may arise when han-
dling the product. If this concentration is exceeded, self-
contained breathing apparatus must be used.
Hand protection : Chemical-resistant, impervious gloves complying with an
approved standard should be worn at all times when handling
chemical products if a risk assessment indicates this is nec-
essary.
Eye protection : Safety eyewear complying with an approved standard should
be used when a risk assessment indicates this is necessary.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
4 / 8
Skin and body protection : Choose body protection in relation to its type, to the concen-
tration and amount of dangerous substances, and to the spe-
cific work-place.
Protective measures : Do not breathe dust.
Hygiene measures : Wash hands before breaks and immediately after handling
the product.
Remove contaminated clothing and protective equipment
before entering eating areas.
Avoid breathing dust.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : solid
Color : various
Odor : odorless
Odor Threshold : No data available
pH : Not applicable
Melting point/range / Freezing
point
: No data available
Boiling point/boiling range : No data available
Flash point : Not applicable
Evaporation rate : No data available
Flammability (solid, gas) : May form combustible dust concentrations in air during pro-
cessing, handling or other means.
Upper explosion limit / Upper
flammability limit
: No data available
Lower explosion limit / Lower
flammability limit
: No data available
Vapor pressure : No data available
Relative vapor density : No data available
Density : ca. 0.05 – 1.75 g/cm3
Solubility(ies)
Water solubility : No data available
Solubility in other solvents : No data available
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
5 / 8
Partition coefficient: n-
octanol/water
: No data available
Autoignition temperature : No data available
Decomposition temperature : No data available
Viscosity
Viscosity, dynamic : No data available
Viscosity, kinematic : No data available
Explosive properties : No data available
Oxidizing properties : No data available
Volatile organic compounds
(VOC) content
: Not applicable
SECTION 10. STABILITY AND REACTIVITY
Reactivity : No dangerous reaction known under conditions of normal use.
Chemical stability : The product is chemically stable.
Possibility of hazardous reac-
tions
: Stable under recommended storage conditions.
Conditions to avoid : No data available
Incompatible materials : No data available
Hazardous decomposition
products
: No decomposition if stored and applied as directed.
SECTION 11. TOXICOLOGICAL INFORMATION
Not classified due to lack of data.
Skin corrosion/irritation
Not classified due to lack of data.
Serious eye damage/eye irritation
Not classified due to lack of data.
Respiratory or skin sensitization
Skin sensitization
Not classified due to lack of data.
Respiratory sensitization
Not classified due to lack of data.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
6 / 8
Germ cell mutagenicity
Not classified due to lack of data.
Carcinogenicity
Not classified due to lack of data.
IARC Not applicable
OSHA Not applicable
NTP Not applicable
Reproductive toxicity
Not classified due to lack of data.
STOT-single exposure
Not classified due to lack of data.
STOT-repeated exposure
Not classified due to lack of data.
Aspiration toxicity
Not classified due to lack of data.
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Other adverse effects
Product:
Additional ecological infor-
mation
: Do not empty into drains; dispose of this material and its con-
tainer in a safe way.
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
Waste from residues : Disposal of this product, solutions and any by-products should
at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional
local authority requirements.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
7 / 8
Contaminated packaging : Empty containers should be taken to an approved waste han-
dling site for recycling or disposal.
SECTION 14. TRANSPORT INFORMATION
International Regulations
IATA-DGR
Not regulated as a dangerous good
IMDG-Code
Not regulated as a dangerous good
Domestic regulation
49 CFR
Not regulated as a dangerous good
SECTION 15. REGULATORY INFORMATION
TSCA list : This product is an article under TSCA 40 CFR 720.3 (c).
No substances are subject to a Significant New Use Rule.
No substances are subject to TSCA 12(b) export notification requirements.
CERCLA Reportable Quantity
This material does not contain any components with a CERCLA RQ.
SARA 304 Extremely Hazardous Substances Reportable Quantity
This material does not contain any components with a section 304 EHS RQ.
SARA 302 Extremely Hazardous Substances Threshold Planning Quantity
This material does not contain any components with a section 302 EHS TPQ.
SARA 311/312 Hazards
: Combustible dust
SARA 313
: This material does not contain any chemical components with
known CAS numbers that exceed the threshold (De Minimis)
reporting levels established by SARA Title III, Section 313.
Clean Air Act
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air
Act Section 112 (40 CFR 61).
California Prop. 65
WARNING: This product can expose you to chemicals including Titanium dioxide, which is known to
the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Safety Data Sheet
according to OSHA 1910.1200 Hazard Communication Standard
SikaBlock M600 N
Revision Date 08/17/2023
Print Date 08/17/2023
8 / 8
SECTION 16. OTHER INFORMATION
Full text of other abbreviations
Notes to Reader
The information contained in this Safety Data Sheet applies only to the actual Sika Corporation
(“Sika”) product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data re- garding the identified product that Sika believes to be reliable as of the date hereof. Prior to each
use of any Sika product, the user must always read and follow the warnings and instructions on
the product’s current Product Data Sheet, product label and Safety Data Sheet for each Sika
product, which are available at web site and/or telephone number listed in Section 1 of this SDS.
SIKA MAKES NO W ARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY
ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER
ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE
RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INF RINGE ON ANY
PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at
www.sikausa.com or 201- 933-8800.
Revision Date 08/17/2023
000000108457
US / Z8
by | Sep 27, 2025
Page 1/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
51.0.8
1 Identification
Product identifier
Trade name: LAB 850
Article number:L850
Application of the substance / the mixtureUrethane Board
Details of the supplier of the safety data sheet
Sika Advanced Resins, US
EHS Department
Manufacturer/Supplier:
Supplier’s Name: Sika Advanced Resins, US
Headquarters:
30800 Stephenson Hwy
Madison Heights, MI 48071
USA
advancedresins.ehs@us.sika.com
Information department:Product safety department
Emergency telephone number:
During normal opening times: +1 (248) 588-2270
CHEMTREC 24-hour Emergency: +1 (800) 424-9300
2 Hazard(s) identification
Classification of the substance or mixture
Combustible Dust May form combustible dust concentrations in air.
Label elements
GHS label elementsThe substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictogramsVoid
Signal wordWarning
Hazard statements
May form combustible dust concentrations in air.
Classification system:
NFPA ratings (scale 0 – 4)
0
1
0
Health = 0
Fire = 1
Reactivity = 0
HMIS-ratings (scale 0 – 4)
HEALTH
FIRE
REACTIVITY
0
1
0
Health = 0
Fire = 1
Reactivity = 0
(Contd. on page 2)
US
Page 2/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 1)
51.0.8
Other hazards
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
3 Composition/information on ingredients
Chemical characterization: Substances
CAS No. Description
Rigid Polymeric Block
4 First-aid measures
Description of first aid measures
After inhalation:Supply fresh air; consult doctor in case of complaints.
After skin contact:Generally the product does not irritate the skin.
After eye contact:Dust: Rinse opened eye for several minutes under running water, then consult a doctor.
After swallowing:If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:Use fire fighting measures that suit the environment.
Special hazards arising from the substance or mixture
Formation of toxic gases is possible during heating or in case of fire.
Advice for firefighters
Protective equipment:Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations.
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid formation of dust.
Ensure adequate ventilation
Environmental precautions:Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:Pick up mechanically.
Reference to other sections
See Section 7 for information on safe handling.
(Contd. on page 3)
US
Page 3/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 2)
51.0.8
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Protective Action Criteria for Chemicals
PAC-1:
Substance is not listed.
PAC-2:
Substance is not listed.
PAC-3:
Substance is not listed.
7 Handling and storage
Handling:
Precautions for safe handling
Provide suction extractors if dust is formed.
Extractors are required on all machines used for thermal processing or splinter removal processes.
Any deposit of dust which cannot be avoided must be regularly removed.
Use appropriate industrial vacuum cleaners or central vacuum systems for dust removal.
Information about protection against explosions and fires:
Dust can combine with air to form an explosive mixture.
The product forms flammable fumes when heated.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:No special requirements.
Information about storage in one common storage facility:Not required.
Further information about storage conditions:None.
Specific end use(s)No further relevant information available.
8 Exposure controls/personal protection
Additional information about design of technical systems:No further data; see item 7.
Control parameters
Components with limit values that require monitoring at the workplace:Not required.
Additional information:The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment:
General protective and hygienic measures:Wash hands before breaks and at the end of work.
Breathing equipment:Dust mask
Protection of hands:
Wear gloves for the protection against mechanical hazards according to EN 388.
(Contd. on page 4)
US
Page 4/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 3)
51.0.8
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Eye protection:Not required.
Body protection:Protective work clothing
9 Physical and chemical properties
Information on basic physical and chemical properties
General Information
Appearance:
Form: Solidified mass
Color: According to product specification
Odor: Odorless
Odor threshold: Not determined.
pH-value: Not applicable.
Change in condition
Melting point/Melting range:Undetermined.
Boiling point/Boiling range:Undetermined.
Flash point: Not applicable.
Flammability (solid, gaseous):Product is not flammable.
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: Not applicable.
Density at 20 C (68 F): 1.18 g/cm (9.85 lbs/gal)
Relative density Not determined.
Vapor density Not applicable.
Evaporation rate Not applicable.
(Contd. on page 5)
US
Page 5/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 4)
51.0.8
Solubility in / Miscibility with
Water: Soluble.
Partition coefficient (n-octanol/water):Not determined.
Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
VOC content: 0.00 %
Solids content: 100.0 %
Other information No further relevant information available.
* 10 Stability and reactivity
ReactivityNo further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.
Possibility of hazardous reactionsNo dangerous reactions known.
Conditions to avoidNo further relevant information available.
Incompatible materials:No further relevant information available.
Hazardous decomposition products:Carbon monoxide and carbon dioxide
11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin:No irritant effect.
on the eye:No irritating effect.
Sensitization:No sensitizing effects known.
Additional toxicological information:
Carcinogenic categories
IARC (International Agency for Research on Cancer)
Substance is not listed.
NTP (National Toxicology Program)
Substance is not listed.
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.
US
(Contd. on page 6)
Page 6/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 5)
51.0.8
12 Ecological information
Toxicity
Aquatic toxicity:No further relevant information available.
Persistence and degradabilityNo further relevant information available.
Behavior in environmental systems:
Bioaccumulative potentialNo further relevant information available.
Mobility in soilNo further relevant information available.
Additional ecological information:
General notes:
At present there are no ecotoxicological assessments.
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT:Not applicable.
vPvB:Not applicable.
Other adverse effectsNo further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation:
The generation of the waste should be minimized whenever possble. Disposal of this product must comply with the
requirements of the the national and local regulations.
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation:Disposal must be made according to official regulations.
Recommended cleansing agent:Water, if necessary with cleansing agents.
14 Transport information
UN-Number
DOT, ADN, IMDG, IATA not regulated
UN proper shipping name Solid Plastic Mass, NOI
DOT, ADN, IMDG, IATA not regulated
Transport hazard class(es) Not regulated
DOT, ADN, IMDG, IATA
Class not regulated
Packing group Not regulated
DOT, IMDG, IATA not regulated
(Contd. on page 7)
US
Page 7/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 6)
51.0.8
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN “Model Regulation”: not regulated
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is not listed.
Section 313 (Specific toxic chemical listings):
Substance is not listed.
TSCA (Toxic Substances Control Act):
ACTIVE
Chemicals regulated by TSCA Section 12(b)
Substance is not listed.
Chemical regulated by TSCA 5(a)(2)rule:
Substance is not listed.
Hazardous Air Pollutants
Substance is not listed.
Proposition 65
Chemicals known to cause cancer:
Substance is not listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is not listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
Substance is not listed.
(Contd. on page 8)
US
Page 8/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/06/2020 Reviewed on 07/06/2020
Trade name: LAB 850
(Contd. of page 7)
51.0.8
TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
Listed in CWC Regulations
Substance is not listed.
GHS label elementsThe substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictogramsVoid
Signal wordWarning
Hazard statements
May form combustible dust concentrations in air.
Chemical safety assessment:A Chemical Safety Assessment has not been carried out.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Date of preparation / last revision07/06/2020 / 16
Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
HMIS: Hazardous Materials Identification System (USA)
VOC: Volatile Organic Compounds (USA, EU)
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
NIOSH: National Institute for Occupational Safety
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
* Data compared to the previous version altered.
US
by | Sep 27, 2025
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Material Safety Data Sheet
according to regulation EC No. 1907/2006 REACH
obomodulan
302 pink
Polyurethane board material [1]
Printing date: 20.07.2020 Reviewed: 20.07.2020
1.) IDENTIFICATION OF THE SUBSTANCE OR MIXTU RE AND OF THE COMPANY NAME
Commercial name: obomodulan
302 pink
Use of substance/mixtures: model making material
Supplier: OBO-Werke GmbH
Am Bahnhof 5
31655 Stadthagen Germany
phone +49/5721/7801 -0
fax +49/5721/77855
Please take note that this document is not a legal requirement.
2.) HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
This substance isn t classified as hazardous in accordance with regulation (EC) no. 1272/2008.
2.2. Label elements
There is no requirement for the product to be specially labelled according to EC directives in
correspondence to national laws.
2.3. Other hazards
When milling: danger of dust explosion
3.) COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization: reaction product based on polyurethane
4.) FIRST AID MEASURES
4.1. Description of first aid measures
Eye contact: Dust: immediately flush eyes with plenty of water, occasionally lifting the upper
and lower eyelids. Check for and remove any contacts lenses. Get medical
attention if irritation occurs.
Inhalation: Dust: remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical attention if symptoms occur.
Skin contact: Dust: flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur.
Swallow: Dust: wash out mouth with water. Remove victim to fresh air and keep at rest in
a position comfortable for breathing. Get medical attention if symptoms occur.
4.2. Most important symptoms and effects, both acute and delayed potential acute health effects
There are no data available
4.3. Indication of any immediate medical attention and special treatment needed
There are no data available
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
..2
[2]
5.) FIRE-FIGHTING MEASURES
5.1. Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the fire surroundings.
5.2. Special hazards arising from the substance or mixture
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible
5.3. Advice for firefighters
Promptly isolate the scene by removing all persona from the vicinity of the incident if there is a fire. No
action shall be taken involving any personal risk or without suitable training.
Special protective equipment for fire -fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
(SCBA) with a full face-piece operated in positive pressure mode clothing for fire-fighters (including
helmets, protective boots and gloves)
6.) ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Dust can create explosive mixture. Keep away from sources of ignition, no smoking. Don t breathe dust.
Provide adequate ventilation.
6.2. Environmental precautions
No special measures are necessary.
6.3. Methods and materials f or containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Avoid dust formation
6.4. Reference to other sections:
None
7.) HANDLING AND STORAGE
7.1. Precautions for safe handling
No special measures necessary if used correctly. Avoid dust formation. Keep away from source of
ignition, No smoking
Advice on protection against fire and explosion
Dust can create explosive mixture.
7.2. Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. No special measures necessary. Keep away from direct
sunlight and avoid temperature variations.
7.3. Specific end uses(s):
No information available
8.) EXPOSURE CONTR OLS/PERSONAL PROTECTION
8.1. Control parameters
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Contains no substances with occupational exposure limit values
..3
[3]
8.2. Exposure controls
Appropriate engineering controls
No special measures necessary.
Individual protection and Hygiene measures
May form combustible dust concentrations in air. Keep away from source of ignition. No smoking
Eye/face protection
Dust production eye glasses, wear suitable (dust-tight) gloves
Skin /hand protection
Protective clothing, safety shoes
Respiratory protection:
While machining in case of dust formation wear micro dust mask.
9.) PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties Appearance:
Physical state: solid, board/block
Colour: pink
Odour: odourless
pH: not available
Flash point: not available
Density: 300 kg/m
Solubility: not soluble in water
9.2. Other information
No additional information
10.) STABILITY AND REACTIVITY
10.1. Reactivity
No information available
10.2. Chemical stability
The product is stable.
10.3. Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Condition to avoid
No special measure are necessary. Do not overheat > 200 C to avoid thermal decomposition
10.5. Incompatible materials
Not specific data available
10.6. Hazardous decomposition products
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible.
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
11.) TOXICOLOGICAL INFORMATIONS
11.1. Information on toxicological effects
Acute toxicity: not available
..4
[4]
Irritation/corrosion: dust particles, like other inert materials, are mechanically irritating eyes
Sensitization: based on available data, classification criteria are not met
Carcinogenicity: based on available data, classification criteria are not met
Aspiration hazard: based on available data, classification criteria are not met
12.) ECOLOGICAL INFORMATION
12.1. Toxicity: not available
12.2. Persistence and degradability : not degradable
12.3. Bio accumulative potential: not available
12.4. Mobility in soil: not available
12.5. Results of PBT and vPvB assessment : not available
12.6. Other adverse effects: not available
13.) DISPOSAL CONSIDERATIONS
13.1. Waste treatment / methods of disposal:
Dispose in compliance of local regulations. Recycling should be preferred to disposal.
14.) TRANSPORT INFORMATION
ADR/RID-AND/ADNR IMDG IATA
14.1. UN number Not regulated Not regulated Not regulated
14.2. UN proper shipping name
14.3. Transport hazard – – –
14.4. Packing group – – –
14.5. Environmental hazards no
14.6. Special precautions for user No dangerous good Not available Not available
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code: not available
15.) REGULATROY INFORMATION
15.1. Safety, health and environmental regulations specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Article 57)
None of the components are listed
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
National regulatory information:
Not water contaminating
15.2. Chemical safety assessment:
For this product a chemical safety assessment is not required.
..5
[5]
16.) OTHER INFORMATION:
Information given under items 4 to 8 and 10 to 12 do partly not refer to the use and the regular employing of
the product (in this sense consult information on use and on product) but to liberation of major amount in case
of accidents and irregularities.
Notice to reader:
The information contained in the safety data sheet corresponds to our level of knowledge at the time of publications. All
warranties are excluded. Our most current general sales conditions shall apply. Please consult the product data sheet prior to
any use and processing.
Stadthagen, 20.07.2020
by | Sep 27, 2025
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Material Safety Data Sheet
according to regulation EC No. 1907/2006 REACH
obomodulan
302 pink
Polyurethane board material [1]
Printing date: 20.07.2020 Reviewed: 20.07.2020
1.) IDENTIFICATION OF THE SUBSTANCE OR MIXTU RE AND OF THE COMPANY NAME
Commercial name: obomodulan
302 pink
Use of substance/mixtures: model making material
Supplier: OBO-Werke GmbH
Am Bahnhof 5
31655 Stadthagen Germany
phone +49/5721/7801 -0
fax +49/5721/77855
Please take note that this document is not a legal requirement.
2.) HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
This substance isn t classified as hazardous in accordance with regulation (EC) no. 1272/2008.
2.2. Label elements
There is no requirement for the product to be specially labelled according to EC directives in
correspondence to national laws.
2.3. Other hazards
When milling: danger of dust explosion
3.) COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization: reaction product based on polyurethane
4.) FIRST AID MEASURES
4.1. Description of first aid measures
Eye contact: Dust: immediately flush eyes with plenty of water, occasionally lifting the upper
and lower eyelids. Check for and remove any contacts lenses. Get medical
attention if irritation occurs.
Inhalation: Dust: remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical attention if symptoms occur.
Skin contact: Dust: flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur.
Swallow: Dust: wash out mouth with water. Remove victim to fresh air and keep at rest in
a position comfortable for breathing. Get medical attention if symptoms occur.
4.2. Most important symptoms and effects, both acute and delayed potential acute health effects
There are no data available
4.3. Indication of any immediate medical attention and special treatment needed
There are no data available
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
..2
[2]
5.) FIRE-FIGHTING MEASURES
5.1. Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the fire surroundings.
5.2. Special hazards arising from the substance or mixture
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible
5.3. Advice for firefighters
Promptly isolate the scene by removing all persona from the vicinity of the incident if there is a fire. No
action shall be taken involving any personal risk or without suitable training.
Special protective equipment for fire -fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
(SCBA) with a full face-piece operated in positive pressure mode clothing for fire-fighters (including
helmets, protective boots and gloves)
6.) ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Dust can create explosive mixture. Keep away from sources of ignition, no smoking. Don t breathe dust.
Provide adequate ventilation.
6.2. Environmental precautions
No special measures are necessary.
6.3. Methods and materials f or containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Avoid dust formation
6.4. Reference to other sections:
None
7.) HANDLING AND STORAGE
7.1. Precautions for safe handling
No special measures necessary if used correctly. Avoid dust formation. Keep away from source of
ignition, No smoking
Advice on protection against fire and explosion
Dust can create explosive mixture.
7.2. Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. No special measures necessary. Keep away from direct
sunlight and avoid temperature variations.
7.3. Specific end uses(s):
No information available
8.) EXPOSURE CONTR OLS/PERSONAL PROTECTION
8.1. Control parameters
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Contains no substances with occupational exposure limit values
..3
[3]
8.2. Exposure controls
Appropriate engineering controls
No special measures necessary.
Individual protection and Hygiene measures
May form combustible dust concentrations in air. Keep away from source of ignition. No smoking
Eye/face protection
Dust production eye glasses, wear suitable (dust-tight) gloves
Skin /hand protection
Protective clothing, safety shoes
Respiratory protection:
While machining in case of dust formation wear micro dust mask.
9.) PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties Appearance:
Physical state: solid, board/block
Colour: pink
Odour: odourless
pH: not available
Flash point: not available
Density: 300 kg/m
Solubility: not soluble in water
9.2. Other information
No additional information
10.) STABILITY AND REACTIVITY
10.1. Reactivity
No information available
10.2. Chemical stability
The product is stable.
10.3. Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Condition to avoid
No special measure are necessary. Do not overheat > 200 C to avoid thermal decomposition
10.5. Incompatible materials
Not specific data available
10.6. Hazardous decomposition products
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible.
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
11.) TOXICOLOGICAL INFORMATIONS
11.1. Information on toxicological effects
Acute toxicity: not available
..4
[4]
Irritation/corrosion: dust particles, like other inert materials, are mechanically irritating eyes
Sensitization: based on available data, classification criteria are not met
Carcinogenicity: based on available data, classification criteria are not met
Aspiration hazard: based on available data, classification criteria are not met
12.) ECOLOGICAL INFORMATION
12.1. Toxicity: not available
12.2. Persistence and degradability : not degradable
12.3. Bio accumulative potential: not available
12.4. Mobility in soil: not available
12.5. Results of PBT and vPvB assessment : not available
12.6. Other adverse effects: not available
13.) DISPOSAL CONSIDERATIONS
13.1. Waste treatment / methods of disposal:
Dispose in compliance of local regulations. Recycling should be preferred to disposal.
14.) TRANSPORT INFORMATION
ADR/RID-AND/ADNR IMDG IATA
14.1. UN number Not regulated Not regulated Not regulated
14.2. UN proper shipping name
14.3. Transport hazard – – –
14.4. Packing group – – –
14.5. Environmental hazards no
14.6. Special precautions for user No dangerous good Not available Not available
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code: not available
15.) REGULATROY INFORMATION
15.1. Safety, health and environmental regulations specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Article 57)
None of the components are listed
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
National regulatory information:
Not water contaminating
15.2. Chemical safety assessment:
For this product a chemical safety assessment is not required.
..5
[5]
16.) OTHER INFORMATION:
Information given under items 4 to 8 and 10 to 12 do partly not refer to the use and the regular employing of
the product (in this sense consult information on use and on product) but to liberation of major amount in case
of accidents and irregularities.
Notice to reader:
The information contained in the safety data sheet corresponds to our level of knowledge at the time of publications. All
warranties are excluded. Our most current general sales conditions shall apply. Please consult the product data sheet prior to
any use and processing.
Stadthagen, 20.07.2020
by | Sep 27, 2025
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Material Safety Data Sheet
according to regulation EC No. 1907/2006 REACH
obomodulan
302 pink
Polyurethane board material [1]
Printing date: 20.07.2020 Reviewed: 20.07.2020
1.) IDENTIFICATION OF THE SUBSTANCE OR MIXTU RE AND OF THE COMPANY NAME
Commercial name: obomodulan
302 pink
Use of substance/mixtures: model making material
Supplier: OBO-Werke GmbH
Am Bahnhof 5
31655 Stadthagen Germany
phone +49/5721/7801 -0
fax +49/5721/77855
Please take note that this document is not a legal requirement.
2.) HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
This substance isn t classified as hazardous in accordance with regulation (EC) no. 1272/2008.
2.2. Label elements
There is no requirement for the product to be specially labelled according to EC directives in
correspondence to national laws.
2.3. Other hazards
When milling: danger of dust explosion
3.) COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization: reaction product based on polyurethane
4.) FIRST AID MEASURES
4.1. Description of first aid measures
Eye contact: Dust: immediately flush eyes with plenty of water, occasionally lifting the upper
and lower eyelids. Check for and remove any contacts lenses. Get medical
attention if irritation occurs.
Inhalation: Dust: remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical attention if symptoms occur.
Skin contact: Dust: flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur.
Swallow: Dust: wash out mouth with water. Remove victim to fresh air and keep at rest in
a position comfortable for breathing. Get medical attention if symptoms occur.
4.2. Most important symptoms and effects, both acute and delayed potential acute health effects
There are no data available
4.3. Indication of any immediate medical attention and special treatment needed
There are no data available
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
..2
[2]
5.) FIRE-FIGHTING MEASURES
5.1. Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the fire surroundings.
5.2. Special hazards arising from the substance or mixture
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible
5.3. Advice for firefighters
Promptly isolate the scene by removing all persona from the vicinity of the incident if there is a fire. No
action shall be taken involving any personal risk or without suitable training.
Special protective equipment for fire -fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
(SCBA) with a full face-piece operated in positive pressure mode clothing for fire-fighters (including
helmets, protective boots and gloves)
6.) ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Dust can create explosive mixture. Keep away from sources of ignition, no smoking. Don t breathe dust.
Provide adequate ventilation.
6.2. Environmental precautions
No special measures are necessary.
6.3. Methods and materials f or containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Avoid dust formation
6.4. Reference to other sections:
None
7.) HANDLING AND STORAGE
7.1. Precautions for safe handling
No special measures necessary if used correctly. Avoid dust formation. Keep away from source of
ignition, No smoking
Advice on protection against fire and explosion
Dust can create explosive mixture.
7.2. Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. No special measures necessary. Keep away from direct
sunlight and avoid temperature variations.
7.3. Specific end uses(s):
No information available
8.) EXPOSURE CONTR OLS/PERSONAL PROTECTION
8.1. Control parameters
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Contains no substances with occupational exposure limit values
..3
[3]
8.2. Exposure controls
Appropriate engineering controls
No special measures necessary.
Individual protection and Hygiene measures
May form combustible dust concentrations in air. Keep away from source of ignition. No smoking
Eye/face protection
Dust production eye glasses, wear suitable (dust-tight) gloves
Skin /hand protection
Protective clothing, safety shoes
Respiratory protection:
While machining in case of dust formation wear micro dust mask.
9.) PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties Appearance:
Physical state: solid, board/block
Colour: pink
Odour: odourless
pH: not available
Flash point: not available
Density: 300 kg/m
Solubility: not soluble in water
9.2. Other information
No additional information
10.) STABILITY AND REACTIVITY
10.1. Reactivity
No information available
10.2. Chemical stability
The product is stable.
10.3. Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Condition to avoid
No special measure are necessary. Do not overheat > 200 C to avoid thermal decomposition
10.5. Incompatible materials
Not specific data available
10.6. Hazardous decomposition products
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible.
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
11.) TOXICOLOGICAL INFORMATIONS
11.1. Information on toxicological effects
Acute toxicity: not available
..4
[4]
Irritation/corrosion: dust particles, like other inert materials, are mechanically irritating eyes
Sensitization: based on available data, classification criteria are not met
Carcinogenicity: based on available data, classification criteria are not met
Aspiration hazard: based on available data, classification criteria are not met
12.) ECOLOGICAL INFORMATION
12.1. Toxicity: not available
12.2. Persistence and degradability : not degradable
12.3. Bio accumulative potential: not available
12.4. Mobility in soil: not available
12.5. Results of PBT and vPvB assessment : not available
12.6. Other adverse effects: not available
13.) DISPOSAL CONSIDERATIONS
13.1. Waste treatment / methods of disposal:
Dispose in compliance of local regulations. Recycling should be preferred to disposal.
14.) TRANSPORT INFORMATION
ADR/RID-AND/ADNR IMDG IATA
14.1. UN number Not regulated Not regulated Not regulated
14.2. UN proper shipping name
14.3. Transport hazard – – –
14.4. Packing group – – –
14.5. Environmental hazards no
14.6. Special precautions for user No dangerous good Not available Not available
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code: not available
15.) REGULATROY INFORMATION
15.1. Safety, health and environmental regulations specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Article 57)
None of the components are listed
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
National regulatory information:
Not water contaminating
15.2. Chemical safety assessment:
For this product a chemical safety assessment is not required.
..5
[5]
16.) OTHER INFORMATION:
Information given under items 4 to 8 and 10 to 12 do partly not refer to the use and the regular employing of
the product (in this sense consult information on use and on product) but to liberation of major amount in case
of accidents and irregularities.
Notice to reader:
The information contained in the safety data sheet corresponds to our level of knowledge at the time of publications. All
warranties are excluded. Our most current general sales conditions shall apply. Please consult the product data sheet prior to
any use and processing.
Stadthagen, 20.07.2020
by | Sep 27, 2025
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Material Safety Data Sheet
according to regulation EC No. 1907/2006 REACH
obomodulan
302 pink
Polyurethane board material [1]
Printing date: 20.07.2020 Reviewed: 20.07.2020
1.) IDENTIFICATION OF THE SUBSTANCE OR MIXTU RE AND OF THE COMPANY NAME
Commercial name: obomodulan
302 pink
Use of substance/mixtures: model making material
Supplier: OBO-Werke GmbH
Am Bahnhof 5
31655 Stadthagen Germany
phone +49/5721/7801 -0
fax +49/5721/77855
Please take note that this document is not a legal requirement.
2.) HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
This substance isn t classified as hazardous in accordance with regulation (EC) no. 1272/2008.
2.2. Label elements
There is no requirement for the product to be specially labelled according to EC directives in
correspondence to national laws.
2.3. Other hazards
When milling: danger of dust explosion
3.) COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization: reaction product based on polyurethane
4.) FIRST AID MEASURES
4.1. Description of first aid measures
Eye contact: Dust: immediately flush eyes with plenty of water, occasionally lifting the upper
and lower eyelids. Check for and remove any contacts lenses. Get medical
attention if irritation occurs.
Inhalation: Dust: remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical attention if symptoms occur.
Skin contact: Dust: flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur.
Swallow: Dust: wash out mouth with water. Remove victim to fresh air and keep at rest in
a position comfortable for breathing. Get medical attention if symptoms occur.
4.2. Most important symptoms and effects, both acute and delayed potential acute health effects
There are no data available
4.3. Indication of any immediate medical attention and special treatment needed
There are no data available
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
..2
[2]
5.) FIRE-FIGHTING MEASURES
5.1. Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the fire surroundings.
5.2. Special hazards arising from the substance or mixture
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible
5.3. Advice for firefighters
Promptly isolate the scene by removing all persona from the vicinity of the incident if there is a fire. No
action shall be taken involving any personal risk or without suitable training.
Special protective equipment for fire -fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
(SCBA) with a full face-piece operated in positive pressure mode clothing for fire-fighters (including
helmets, protective boots and gloves)
6.) ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Dust can create explosive mixture. Keep away from sources of ignition, no smoking. Don t breathe dust.
Provide adequate ventilation.
6.2. Environmental precautions
No special measures are necessary.
6.3. Methods and materials f or containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Avoid dust formation
6.4. Reference to other sections:
None
7.) HANDLING AND STORAGE
7.1. Precautions for safe handling
No special measures necessary if used correctly. Avoid dust formation. Keep away from source of
ignition, No smoking
Advice on protection against fire and explosion
Dust can create explosive mixture.
7.2. Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. No special measures necessary. Keep away from direct
sunlight and avoid temperature variations.
7.3. Specific end uses(s):
No information available
8.) EXPOSURE CONTR OLS/PERSONAL PROTECTION
8.1. Control parameters
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Contains no substances with occupational exposure limit values
..3
[3]
8.2. Exposure controls
Appropriate engineering controls
No special measures necessary.
Individual protection and Hygiene measures
May form combustible dust concentrations in air. Keep away from source of ignition. No smoking
Eye/face protection
Dust production eye glasses, wear suitable (dust-tight) gloves
Skin /hand protection
Protective clothing, safety shoes
Respiratory protection:
While machining in case of dust formation wear micro dust mask.
9.) PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties Appearance:
Physical state: solid, board/block
Colour: pink
Odour: odourless
pH: not available
Flash point: not available
Density: 300 kg/m
Solubility: not soluble in water
9.2. Other information
No additional information
10.) STABILITY AND REACTIVITY
10.1. Reactivity
No information available
10.2. Chemical stability
The product is stable.
10.3. Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Condition to avoid
No special measure are necessary. Do not overheat > 200 C to avoid thermal decomposition
10.5. Incompatible materials
Not specific data available
10.6. Hazardous decomposition products
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible.
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
11.) TOXICOLOGICAL INFORMATIONS
11.1. Information on toxicological effects
Acute toxicity: not available
..4
[4]
Irritation/corrosion: dust particles, like other inert materials, are mechanically irritating eyes
Sensitization: based on available data, classification criteria are not met
Carcinogenicity: based on available data, classification criteria are not met
Aspiration hazard: based on available data, classification criteria are not met
12.) ECOLOGICAL INFORMATION
12.1. Toxicity: not available
12.2. Persistence and degradability : not degradable
12.3. Bio accumulative potential: not available
12.4. Mobility in soil: not available
12.5. Results of PBT and vPvB assessment : not available
12.6. Other adverse effects: not available
13.) DISPOSAL CONSIDERATIONS
13.1. Waste treatment / methods of disposal:
Dispose in compliance of local regulations. Recycling should be preferred to disposal.
14.) TRANSPORT INFORMATION
ADR/RID-AND/ADNR IMDG IATA
14.1. UN number Not regulated Not regulated Not regulated
14.2. UN proper shipping name
14.3. Transport hazard – – –
14.4. Packing group – – –
14.5. Environmental hazards no
14.6. Special precautions for user No dangerous good Not available Not available
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code: not available
15.) REGULATROY INFORMATION
15.1. Safety, health and environmental regulations specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Article 57)
None of the components are listed
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
National regulatory information:
Not water contaminating
15.2. Chemical safety assessment:
For this product a chemical safety assessment is not required.
..5
[5]
16.) OTHER INFORMATION:
Information given under items 4 to 8 and 10 to 12 do partly not refer to the use and the regular employing of
the product (in this sense consult information on use and on product) but to liberation of major amount in case
of accidents and irregularities.
Notice to reader:
The information contained in the safety data sheet corresponds to our level of knowledge at the time of publications. All
warranties are excluded. Our most current general sales conditions shall apply. Please consult the product data sheet prior to
any use and processing.
Stadthagen, 20.07.2020
by | Sep 27, 2025
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Material Safety Data Sheet
according to regulation EC No. 1907/2006 REACH
obomodulan
302 pink
Polyurethane board material [1]
Printing date: 20.07.2020 Reviewed: 20.07.2020
1.) IDENTIFICATION OF THE SUBSTANCE OR MIXTU RE AND OF THE COMPANY NAME
Commercial name: obomodulan
302 pink
Use of substance/mixtures: model making material
Supplier: OBO-Werke GmbH
Am Bahnhof 5
31655 Stadthagen Germany
phone +49/5721/7801 -0
fax +49/5721/77855
Please take note that this document is not a legal requirement.
2.) HAZARDS IDENTIFICATION
2.1. Classification of the substance or mixture
This substance isn t classified as hazardous in accordance with regulation (EC) no. 1272/2008.
2.2. Label elements
There is no requirement for the product to be specially labelled according to EC directives in
correspondence to national laws.
2.3. Other hazards
When milling: danger of dust explosion
3.) COMPOSITION / INFORMATION ON INGREDIENTS
Chemical characterization: reaction product based on polyurethane
4.) FIRST AID MEASURES
4.1. Description of first aid measures
Eye contact: Dust: immediately flush eyes with plenty of water, occasionally lifting the upper
and lower eyelids. Check for and remove any contacts lenses. Get medical
attention if irritation occurs.
Inhalation: Dust: remove victim to fresh air and keep at rest in a position comfortable for
breathing. Get medical attention if symptoms occur.
Skin contact: Dust: flush contaminated skin with plenty of water. Remove contaminated
clothing and shoes. Get medical attention if symptoms occur.
Swallow: Dust: wash out mouth with water. Remove victim to fresh air and keep at rest in
a position comfortable for breathing. Get medical attention if symptoms occur.
4.2. Most important symptoms and effects, both acute and delayed potential acute health effects
There are no data available
4.3. Indication of any immediate medical attention and special treatment needed
There are no data available
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
..2
[2]
5.) FIRE-FIGHTING MEASURES
5.1. Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the fire surroundings.
5.2. Special hazards arising from the substance or mixture
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible
5.3. Advice for firefighters
Promptly isolate the scene by removing all persona from the vicinity of the incident if there is a fire. No
action shall be taken involving any personal risk or without suitable training.
Special protective equipment for fire -fighters:
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus
(SCBA) with a full face-piece operated in positive pressure mode clothing for fire-fighters (including
helmets, protective boots and gloves)
6.) ACCIDENTAL RELEASE MEASURES
6.1. Personal precautions, protective equipment and emergency procedures
Dust can create explosive mixture. Keep away from sources of ignition, no smoking. Don t breathe dust.
Provide adequate ventilation.
6.2. Environmental precautions
No special measures are necessary.
6.3. Methods and materials f or containment and cleaning up
Take up mechanically, placing in appropriate containers for disposal. Avoid dust formation
6.4. Reference to other sections:
None
7.) HANDLING AND STORAGE
7.1. Precautions for safe handling
No special measures necessary if used correctly. Avoid dust formation. Keep away from source of
ignition, No smoking
Advice on protection against fire and explosion
Dust can create explosive mixture.
7.2. Conditions for safe storage, including any incompatibilities
Store in accordance with local regulations. No special measures necessary. Keep away from direct
sunlight and avoid temperature variations.
7.3. Specific end uses(s):
No information available
8.) EXPOSURE CONTR OLS/PERSONAL PROTECTION
8.1. Control parameters
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
Contains no substances with occupational exposure limit values
..3
[3]
8.2. Exposure controls
Appropriate engineering controls
No special measures necessary.
Individual protection and Hygiene measures
May form combustible dust concentrations in air. Keep away from source of ignition. No smoking
Eye/face protection
Dust production eye glasses, wear suitable (dust-tight) gloves
Skin /hand protection
Protective clothing, safety shoes
Respiratory protection:
While machining in case of dust formation wear micro dust mask.
9.) PHYSICAL AND CHEMICAL PROPERTIES
9.1. Information on basic physical and chemical properties Appearance:
Physical state: solid, board/block
Colour: pink
Odour: odourless
pH: not available
Flash point: not available
Density: 300 kg/m
Solubility: not soluble in water
9.2. Other information
No additional information
10.) STABILITY AND REACTIVITY
10.1. Reactivity
No information available
10.2. Chemical stability
The product is stable.
10.3. Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
10.4. Condition to avoid
No special measure are necessary. Do not overheat > 200 C to avoid thermal decomposition
10.5. Incompatible materials
Not specific data available
10.6. Hazardous decomposition products
Carbon monoxide, nitrogen oxide, isocyanate vapor and traces of hydrogen cyanide is possible.
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
11.) TOXICOLOGICAL INFORMATIONS
11.1. Information on toxicological effects
Acute toxicity: not available
..4
[4]
Irritation/corrosion: dust particles, like other inert materials, are mechanically irritating eyes
Sensitization: based on available data, classification criteria are not met
Carcinogenicity: based on available data, classification criteria are not met
Aspiration hazard: based on available data, classification criteria are not met
12.) ECOLOGICAL INFORMATION
12.1. Toxicity: not available
12.2. Persistence and degradability : not degradable
12.3. Bio accumulative potential: not available
12.4. Mobility in soil: not available
12.5. Results of PBT and vPvB assessment : not available
12.6. Other adverse effects: not available
13.) DISPOSAL CONSIDERATIONS
13.1. Waste treatment / methods of disposal:
Dispose in compliance of local regulations. Recycling should be preferred to disposal.
14.) TRANSPORT INFORMATION
ADR/RID-AND/ADNR IMDG IATA
14.1. UN number Not regulated Not regulated Not regulated
14.2. UN proper shipping name
14.3. Transport hazard – – –
14.4. Packing group – – –
14.5. Environmental hazards no
14.6. Special precautions for user No dangerous good Not available Not available
14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code: not available
15.) REGULATROY INFORMATION
15.1. Safety, health and environmental regulations specific for the substance or mixture
EU Regulation (EC) No. 1907/2006 (REACH) Article 57)
None of the components are listed
Sitz der Gesellschaft: Stadthagen
Reg.: Amtsgericht Stadthagen HRB 907
Gesch ftsf hrer: Kurt H ther, Torben Teichler
National regulatory information:
Not water contaminating
15.2. Chemical safety assessment:
For this product a chemical safety assessment is not required.
..5
[5]
16.) OTHER INFORMATION:
Information given under items 4 to 8 and 10 to 12 do partly not refer to the use and the regular employing of
the product (in this sense consult information on use and on product) but to liberation of major amount in case
of accidents and irregularities.
Notice to reader:
The information contained in the safety data sheet corresponds to our level of knowledge at the time of publications. All
warranties are excluded. Our most current general sales conditions shall apply. Please consult the product data sheet prior to
any use and processing.
Stadthagen, 20.07.2020
