by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70 +/- 2
psi ASTM D-412 4,200
psi ASTM D-790 140,000
% ASTM D-412 80
pli ASTM D-624 700
– Visual Black
ft*lb/in. ASTM D-256 4.5
Units Component A Component B
(A/B) – –
(A/B) 58 42
g/mL 1.14 – 1.16 1.04 – 1.06
cPs 550 – 750 1500 – 1700
Visual Pale Yellow Black
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
2500 lbNet Weight
38 lbNet Weight
Component B: 450 lbNet Weight
2250 lbNet Weight
38 lbNet Weight
275 gallon plastic tote
275 gallon plastic tote
Impact Strength
55 gallon steel drum (open top)
5 gallon plastic pail (open top)
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
5 gallon plastic pail (open top)
Tack Free Time at Gel
Demold Time 5 – 8
90% Cure Time* 24
Color
Gel Time @ 130 – 150 F 50 – 55
Shore Hardness
Tensile Strength
Fluxural Modulus
Elongation
Tear Strength
Physical Properties (Final Product)
CE 5370
TECHNICAL DATA SHEET
Cast Elastomer Polyurethane System
CE 5370 is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough and flexible with
high impact and tear resistance along with excellent chemical and water resistance. CE 5370 performs well as
Auto Facia bumper, Spoiler and Flaring applications.
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
by | Sep 27, 2025
by | Sep 27, 2025
1000 South Linwood Avenue
Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 04/23/2018
CE 3690
Product Information
CE 3690 is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough and
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 3690 performs well for urethane rotational molding applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 500-700 500-700
Specific Gravity (gr/ml) 1.14-1.16 1.01-1.03
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 95 +/-5
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Natural
Handling Characteristics
Mix Ratio by Weight A/B 53/47
Mix Ratio by Volume A/B 50/50
Gel Time (at 75F ), (Seconds) 180 +/-10
Tack Free Time (Minutes) at Gel
Demold Time (Minutes) 20-40
90% Cure Time (Hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue
Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 04/23/2018
CE 3690
Product Information
CE 3690 is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough and
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 3690 performs well for urethane rotational molding applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 500-700 500-700
Specific Gravity (gr/ml) 1.14-1.16 1.01-1.03
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 95 +/-5
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Natural
Handling Characteristics
Mix Ratio by Weight A/B 53/47
Mix Ratio by Volume A/B 50/50
Gel Time (at 75F ), (Seconds) 180 +/-10
Tack Free Time (Minutes) at Gel
Demold Time (Minutes) 20-40
90% Cure Time (Hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70 – 75
psi ASTM D-412 > 3500
psi ASTM D-790 > 8000
% ASTM D-412 5
pli ASTM D-624 –
– Visual Natural/Pigmented
Units Component A Component B
(A/B) – –
(A/B) 50 50
g/mL 1.14 – 1.16 1.08 – 1.10
cPs 60 – 150 200 – 250
Visual Pale Yellow Opaque/White
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
38 lbNet Weight
Component B: 450 lbNet Weight
38 lbNet Weight
Physical Properties (Final Product)
CE 0787
TECHNICAL DATA SHEET
Cast Elastomer Polyurethane System
CE 0787 is a High Performance, multi-purpose polyurethane cast elastomer designed for hand
mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE 0787 is tough with high impact resistance along with excellent chemical
and water resistance. CE 0787 performs well for many casting applications with a low viscosity it
picks up excellent detail in silicone molds.
Shore Hardness
Tensile Strength
Fluxural Strength
Elongation
Tear Strength
Gel Time @ 75 F 160 – 200
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
55 gallon steel drum (open top)
5 gallon plastic pail (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
5 gallon plastic pail (open top)
Tack Free Time at Gel
Demold Time 10 – 20
90% Cure Time* 24
Color
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
by | Sep 27, 2025
Product Information
Units Test Method Results
Shore D ASTM D-2240 70 – 75
psi ASTM D-412 > 3500
psi ASTM D-790 > 8000
% ASTM D-412 5
pli ASTM D-624 –
– Visual Natural/Pigmented
Units Component A Component B
(A/B) – –
(A/B) 50 50
g/mL 1.14 – 1.16 1.08 – 1.10
cPs 60 – 150 200 – 250
Visual Pale Yellow Opaque/White
Seconds
Minutes
Minutes
Hours
Storage and Shelf Life
Packaging
Component A: 500 lbNet Weight
38 lbNet Weight
Component B: 450 lbNet Weight
38 lbNet Weight
Physical Properties (Final Product)
CE 0787
TECHNICAL DATA SHEET
Cast Elastomer Polyurethane System
CE 0787 is a High Performance, multi-purpose polyurethane cast elastomer designed for hand
mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE 0787 is tough with high impact resistance along with excellent chemical
and water resistance. CE 0787 performs well for many casting applications with a low viscosity it
picks up excellent detail in silicone molds.
Shore Hardness
Tensile Strength
Fluxural Strength
Elongation
Tear Strength
Gel Time @ 75 F 160 – 200
Handling Characteristics
Mix Ratio by Volume
Mix Ratio by Weight
Specific Gravity @ 75 F
Viscocity @ 75 F
55 gallon steel drum (open top)
5 gallon plastic pail (open top)
For more information contact Eteco, Inc. (714) 480-1370 | info@etecoinc.com
www.etecoinc.com
Color
*Final properties will be reached in a course of several days. Properties are typical and not for specifications*
Components should be kept well sealed in a dry place from 70 to 90 F. Shelf life of unopened containers is six
(6) months from manufacturing date. Mix Component B well prior to each use. Purge opened containers with
dry nitrogen before resealing. Refer to product SDS for more information.
55 gallon steel drum (closed top)
5 gallon plastic pail (open top)
Tack Free Time at Gel
Demold Time 10 – 20
90% Cure Time* 24
Color
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best knowledge of Eteco, Inc. The data on
these sheets relates only to the specific material designated herein. Eteco, Inc. assumes no legal responsibility for use or reliance upon this data. The user
should conduct sufficient investigation to establish the suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 06/1/2014
CE 0726B
Product Information
CE 726B is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough yet
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 0726B performs well as Concrete Stamp pad and Concrete Form Liners.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 200 – 300 600 – 900
Specific Gravity (gr/ml) 1.01 – 1.03 1.02 – 1.05
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70- 75
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Opaque
Handling Characteristics
Mix Ratio by Weight (Component A: Component B) 53a / 47b
Mix ratio by volume 50a / 50b
Gel Time (at 75 degrees F), (seconds) 160 – 200
Tack Free Time (seconds) at Gel
Demold Time (minutes) 15 25
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of 48 hours.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product MSDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: (714) 480-1370, Fax: (714) 558-1990
Date: 06/1/2014
CE 0726B
Product Information
CE 726B is a High Performance, multi-purpose polyurethane designed for processing through plural
component, high pressure or low pressure dispensing equipment. Once fully cured, it is tough yet
flexible with high impact and tear resistance along with excellent chemical and water resistance.
CE 0726B performs well as Concrete Stamp pad and Concrete Form Liners.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 200 – 300 600 – 900
Specific Gravity (gr/ml) 1.01 – 1.03 1.02 – 1.05
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70- 75
Tensile Strength (psi), ASTM D-412 N/A
Elongation (%), ASTM D-412 N/A
Tear Strength (pli), ASTM D-624, Die C N/A
Color Opaque
Handling Characteristics
Mix Ratio by Weight (Component A: Component B) 53a / 47b
Mix ratio by volume 50a / 50b
Gel Time (at 75 degrees F), (seconds) 160 – 200
Tack Free Time (seconds) at Gel
Demold Time (minutes) 15 25
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of 48 hours.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product MSDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: 714 480 1370 Fax: 714 558 1990
Date: 03/11/2013
CE0717 WHT
Product Information
CE0717 WHT is a High Performance, multi-purpose polyurethane Cast Elastomer designed for Hand
Mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE0717 WHT is tough with high impact resistance along with excellent chemical
and water resistance. CE0717 WHT performs well as Horns, Teeth and Tusk for Taxidermy
applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 60 – 150 200 – 250
Specific Gravity (gr/ml) 1.14 – 1.16 1.08 – 1.10
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70 – 75
Tensile Strength (psi), ASTM D-412 >3500
Elongation (%), ASTM D-412 5.0
Flexural Strength ASTM D-790 >8,000
Color White
Handling Characteristics
Mix Ratio by Volume (Component A: Component B) 50A / 50B
Mix Ratio by Weight 52A / 48B
Gel Time (at 75oF), (seconds) 180 – 210
Tack Free Time (seconds) at Gel
Demold Time 10-20 minutes
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
by | Sep 27, 2025
1000 South Linwood Avenue, Santa Ana, CA 92705
Phone: 714 480 1370 Fax: 714 558 1990
Date: 03/11/2013
CE0717 WHT
Product Information
CE0717 WHT is a High Performance, multi-purpose polyurethane Cast Elastomer designed for Hand
Mixing or processing through plural component, high pressure or low pressure dispensing equipment.
Once fully cured, CE0717 WHT is tough with high impact resistance along with excellent chemical
and water resistance. CE0717 WHT performs well as Horns, Teeth and Tusk for Taxidermy
applications.
Physical Properties (Components)
Component A Component B
Viscosity at 75oF (cps) 60 – 150 200 – 250
Specific Gravity (gr/ml) 1.14 – 1.16 1.08 – 1.10
Physical Properties (Final Product)
Hardness, Shore A, ASTM D-2240 70 – 75
Tensile Strength (psi), ASTM D-412 >3500
Elongation (%), ASTM D-412 5.0
Flexural Strength ASTM D-790 >8,000
Color White
Handling Characteristics
Mix Ratio by Volume (Component A: Component B) 50A / 50B
Mix Ratio by Weight 52A / 48B
Gel Time (at 75oF), (seconds) 180 – 210
Tack Free Time (seconds) at Gel
Demold Time 10-20 minutes
90% Cure Time (hours)* 24
(*) Final physical properties will be reached in a course of several days.
Storage and Shelf Life
Components should be kept well sealed in a dry place from 70 to 90oF. Shelf life of unopened
containers is six (6) months from manufacturing date. Mix Component B well prior to each use. Purge
opened containers with dry nitrogen before resealing. Refer to product SDS for more information.
Packaging
Component A: 55 gallons steel drum (closed top) 500 lb Net Weight
Component B: 55 gallons steel drum (open top) 450 lb Net Weight
Non-Warranty: This information is furnished without warranty, expressed or implied, except that is accurate to the best
knowledge of Eteco, Inc. The data on these sheets relates only to the specific material designated herein. Eteco, Inc. assumes
no legal responsibility for use or reliance upon this data. The user should conduct sufficient investigation to establish the
suitability of any product for its intended use.
