by | Sep 27, 2025
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
SDS Matline+ April 15, 2018
SAFETY DATA SHEET
According to Reach regulation n 1907/2006/CE
1. PRODUCT IDENTIFICATION AND
Product Identifier : Matline+101, 201, 301, 401, 501, 1001
Product type : Chemically bonded carded nonwoven
Company identification : Composite Essential Materials, LLC 315
NW Peacock Blvd.
Port St Lucie, FL 34986
772-344-0034
772-934-3663 fax
Uses : Print blocker or lamination bulker
2. Hazards Identification
Product classification This article is not regulated as hazardous
Hazard of using:
To our knowledge, none that are related to the product itself.
Dangers of burns if product is melted
3. COMPOSITION
Main components
: Polyester fibers
Binder: Styrene Acrylic
Additives: Microspheres made of PAN/PVDC containing isobutane
4. FIRST AID
Skin contact
Eye contact
:
:
No specific measure
Not applicable
5. FIREFIGHTING MEASURES
Flammability class : Class B : solid liquefiable
Specific hazards : Regarding flammable gasses, toxic fumes and contact with molten
material (see 10)
Extinguishing media : Water with extinguishing additive or CO2 powder
6. ACCIDENTAL RELEASE MEASURES
Inert, the product does not require special measures
7. STORAGE AND HANDLING
Precautions for safe handling and
storage :
Store at room temperature in original packaging
Do not store with flammable materials
Store away from heat sources
Store in a dry place
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection
Hand protection : Not applicable
Eye protection : Not applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Matte
Physical state at 20 C : Solid
Color : White
Odor : Odorless
Melting point 160 C
Solubility in water
: Insoluble
10. STABILTY AND REACTIVITY
Stability : In case of thermal decomposition, toxic fumes and gases
may be generated. These decomposition products and oxidation
products depend on the conditions of combustion.
The material in the molten state will not be brought into contact with
the skin which could stick and cause burns.
Unburnt residues and contaminated water will be eliminated after
fire following means according to the legislation on the protection of the environment.
11. TOXICOLOGICAL INFORMATION
According to our experience and information provided to us, the product has no harmful effects under normal
conditions of handling and implementation.
12. ECOLOGICAL INFORMATION
The product has no known special effect
13. DISPOSAL CONSIDERATION
Waste disposal : Dispose of in accordance with
local/regional/international regulations
14. TRANSPORTATION INFORMATION
No hazardous material for transportation
15. REGULATORY INFORMATION
No mandatory informative labeling
16. OTHER INFORMATION
Other data : No information available
This Safety Data Sheet (MSDS) for nonwoven is given voluntarily following the recommendations of the EDANA
(Guidelines / Instructions Relating to nonwovens for MSDS – MSDS / RV7 / 002b). This SDS is a means of transmitting vital information on
risks (including transport information, handling, storage and emergency actions) from the supplier of the fleece to the user thereof.
Nonwovens are generally not considered to pose risks, MSDS is not legally required but should be considered as a means of information. It is
based on the recommendations of the European Community (Commission Directive 93/112 / EC of 10 Dec. 93).
The information in this SDS was developed by the Company PGI at the express request of its customers and to the best of his knowledge and
experience. Accordingly, the information contained in this SDS does not have the force of warranty and cannot engage the responsibility of
PGI.
Users of non-woven product may feel exempted from the safety rules relating to delivered product and to comply with local regulations and
other obligations.
by | Sep 27, 2025
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
SDS Matline+ April 15, 2018
SAFETY DATA SHEET
According to Reach regulation n 1907/2006/CE
1. PRODUCT IDENTIFICATION AND
Product Identifier : Matline+101, 201, 301, 401, 501, 1001
Product type : Chemically bonded carded nonwoven
Company identification : Composite Essential Materials, LLC 315
NW Peacock Blvd.
Port St Lucie, FL 34986
772-344-0034
772-934-3663 fax
Uses : Print blocker or lamination bulker
2. Hazards Identification
Product classification This article is not regulated as hazardous
Hazard of using:
To our knowledge, none that are related to the product itself.
Dangers of burns if product is melted
3. COMPOSITION
Main components
: Polyester fibers
Binder: Styrene Acrylic
Additives: Microspheres made of PAN/PVDC containing isobutane
4. FIRST AID
Skin contact
Eye contact
:
:
No specific measure
Not applicable
5. FIREFIGHTING MEASURES
Flammability class : Class B : solid liquefiable
Specific hazards : Regarding flammable gasses, toxic fumes and contact with molten
material (see 10)
Extinguishing media : Water with extinguishing additive or CO2 powder
6. ACCIDENTAL RELEASE MEASURES
Inert, the product does not require special measures
7. STORAGE AND HANDLING
Precautions for safe handling and
storage :
Store at room temperature in original packaging
Do not store with flammable materials
Store away from heat sources
Store in a dry place
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection
Hand protection : Not applicable
Eye protection : Not applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Matte
Physical state at 20 C : Solid
Color : White
Odor : Odorless
Melting point 160 C
Solubility in water
: Insoluble
10. STABILTY AND REACTIVITY
Stability : In case of thermal decomposition, toxic fumes and gases
may be generated. These decomposition products and oxidation
products depend on the conditions of combustion.
The material in the molten state will not be brought into contact with
the skin which could stick and cause burns.
Unburnt residues and contaminated water will be eliminated after
fire following means according to the legislation on the protection of the environment.
11. TOXICOLOGICAL INFORMATION
According to our experience and information provided to us, the product has no harmful effects under normal
conditions of handling and implementation.
12. ECOLOGICAL INFORMATION
The product has no known special effect
13. DISPOSAL CONSIDERATION
Waste disposal : Dispose of in accordance with
local/regional/international regulations
14. TRANSPORTATION INFORMATION
No hazardous material for transportation
15. REGULATORY INFORMATION
No mandatory informative labeling
16. OTHER INFORMATION
Other data : No information available
This Safety Data Sheet (MSDS) for nonwoven is given voluntarily following the recommendations of the EDANA
(Guidelines / Instructions Relating to nonwovens for MSDS – MSDS / RV7 / 002b). This SDS is a means of transmitting vital information on
risks (including transport information, handling, storage and emergency actions) from the supplier of the fleece to the user thereof.
Nonwovens are generally not considered to pose risks, MSDS is not legally required but should be considered as a means of information. It is
based on the recommendations of the European Community (Commission Directive 93/112 / EC of 10 Dec. 93).
The information in this SDS was developed by the Company PGI at the express request of its customers and to the best of his knowledge and
experience. Accordingly, the information contained in this SDS does not have the force of warranty and cannot engage the responsibility of
PGI.
Users of non-woven product may feel exempted from the safety rules relating to delivered product and to comply with local regulations and
other obligations.
by | Sep 27, 2025
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
SDS Matline+ April 15, 2018
SAFETY DATA SHEET
According to Reach regulation n 1907/2006/CE
1. PRODUCT IDENTIFICATION AND
Product Identifier : Matline+101, 201, 301, 401, 501, 1001
Product type : Chemically bonded carded nonwoven
Company identification : Composite Essential Materials, LLC 315
NW Peacock Blvd.
Port St Lucie, FL 34986
772-344-0034
772-934-3663 fax
Uses : Print blocker or lamination bulker
2. Hazards Identification
Product classification This article is not regulated as hazardous
Hazard of using:
To our knowledge, none that are related to the product itself.
Dangers of burns if product is melted
3. COMPOSITION
Main components
: Polyester fibers
Binder: Styrene Acrylic
Additives: Microspheres made of PAN/PVDC containing isobutane
4. FIRST AID
Skin contact
Eye contact
:
:
No specific measure
Not applicable
5. FIREFIGHTING MEASURES
Flammability class : Class B : solid liquefiable
Specific hazards : Regarding flammable gasses, toxic fumes and contact with molten
material (see 10)
Extinguishing media : Water with extinguishing additive or CO2 powder
6. ACCIDENTAL RELEASE MEASURES
Inert, the product does not require special measures
7. STORAGE AND HANDLING
Precautions for safe handling and
storage :
Store at room temperature in original packaging
Do not store with flammable materials
Store away from heat sources
Store in a dry place
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection
Hand protection : Not applicable
Eye protection : Not applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Matte
Physical state at 20 C : Solid
Color : White
Odor : Odorless
Melting point 160 C
Solubility in water
: Insoluble
10. STABILTY AND REACTIVITY
Stability : In case of thermal decomposition, toxic fumes and gases
may be generated. These decomposition products and oxidation
products depend on the conditions of combustion.
The material in the molten state will not be brought into contact with
the skin which could stick and cause burns.
Unburnt residues and contaminated water will be eliminated after
fire following means according to the legislation on the protection of the environment.
11. TOXICOLOGICAL INFORMATION
According to our experience and information provided to us, the product has no harmful effects under normal
conditions of handling and implementation.
12. ECOLOGICAL INFORMATION
The product has no known special effect
13. DISPOSAL CONSIDERATION
Waste disposal : Dispose of in accordance with
local/regional/international regulations
14. TRANSPORTATION INFORMATION
No hazardous material for transportation
15. REGULATORY INFORMATION
No mandatory informative labeling
16. OTHER INFORMATION
Other data : No information available
This Safety Data Sheet (MSDS) for nonwoven is given voluntarily following the recommendations of the EDANA
(Guidelines / Instructions Relating to nonwovens for MSDS – MSDS / RV7 / 002b). This SDS is a means of transmitting vital information on
risks (including transport information, handling, storage and emergency actions) from the supplier of the fleece to the user thereof.
Nonwovens are generally not considered to pose risks, MSDS is not legally required but should be considered as a means of information. It is
based on the recommendations of the European Community (Commission Directive 93/112 / EC of 10 Dec. 93).
The information in this SDS was developed by the Company PGI at the express request of its customers and to the best of his knowledge and
experience. Accordingly, the information contained in this SDS does not have the force of warranty and cannot engage the responsibility of
PGI.
Users of non-woven product may feel exempted from the safety rules relating to delivered product and to comply with local regulations and
other obligations.
by | Sep 27, 2025
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
SDS Matline+ April 15, 2018
SAFETY DATA SHEET
According to Reach regulation n 1907/2006/CE
1. PRODUCT IDENTIFICATION AND
Product Identifier : Matline+101, 201, 301, 401, 501, 1001
Product type : Chemically bonded carded nonwoven
Company identification : Composite Essential Materials, LLC 315
NW Peacock Blvd.
Port St Lucie, FL 34986
772-344-0034
772-934-3663 fax
Uses : Print blocker or lamination bulker
2. Hazards Identification
Product classification This article is not regulated as hazardous
Hazard of using:
To our knowledge, none that are related to the product itself.
Dangers of burns if product is melted
3. COMPOSITION
Main components
: Polyester fibers
Binder: Styrene Acrylic
Additives: Microspheres made of PAN/PVDC containing isobutane
4. FIRST AID
Skin contact
Eye contact
:
:
No specific measure
Not applicable
5. FIREFIGHTING MEASURES
Flammability class : Class B : solid liquefiable
Specific hazards : Regarding flammable gasses, toxic fumes and contact with molten
material (see 10)
Extinguishing media : Water with extinguishing additive or CO2 powder
6. ACCIDENTAL RELEASE MEASURES
Inert, the product does not require special measures
7. STORAGE AND HANDLING
Precautions for safe handling and
storage :
Store at room temperature in original packaging
Do not store with flammable materials
Store away from heat sources
Store in a dry place
315 NW Peacock Blvd 772-344-0034
Port Saint Lucie, FL 34986 fax 772-934-3663
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Personal protection
Hand protection : Not applicable
Eye protection : Not applicable
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Matte
Physical state at 20 C : Solid
Color : White
Odor : Odorless
Melting point 160 C
Solubility in water
: Insoluble
10. STABILTY AND REACTIVITY
Stability : In case of thermal decomposition, toxic fumes and gases
may be generated. These decomposition products and oxidation
products depend on the conditions of combustion.
The material in the molten state will not be brought into contact with
the skin which could stick and cause burns.
Unburnt residues and contaminated water will be eliminated after
fire following means according to the legislation on the protection of the environment.
11. TOXICOLOGICAL INFORMATION
According to our experience and information provided to us, the product has no harmful effects under normal
conditions of handling and implementation.
12. ECOLOGICAL INFORMATION
The product has no known special effect
13. DISPOSAL CONSIDERATION
Waste disposal : Dispose of in accordance with
local/regional/international regulations
14. TRANSPORTATION INFORMATION
No hazardous material for transportation
15. REGULATORY INFORMATION
No mandatory informative labeling
16. OTHER INFORMATION
Other data : No information available
This Safety Data Sheet (MSDS) for nonwoven is given voluntarily following the recommendations of the EDANA
(Guidelines / Instructions Relating to nonwovens for MSDS – MSDS / RV7 / 002b). This SDS is a means of transmitting vital information on
risks (including transport information, handling, storage and emergency actions) from the supplier of the fleece to the user thereof.
Nonwovens are generally not considered to pose risks, MSDS is not legally required but should be considered as a means of information. It is
based on the recommendations of the European Community (Commission Directive 93/112 / EC of 10 Dec. 93).
The information in this SDS was developed by the Company PGI at the express request of its customers and to the best of his knowledge and
experience. Accordingly, the information contained in this SDS does not have the force of warranty and cannot engage the responsibility of
PGI.
Users of non-woven product may feel exempted from the safety rules relating to delivered product and to comply with local regulations and
other obligations.
by | Sep 27, 2025
SAFETY DATA SHEET
Page 1 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Material Name: Surmat and Conformat
GHS Product Identifier
Product Name(s): All Continuous Filament Mat Products
Other Means of Identification
Synonyms: CFM, JW, N700, N701, N702, N720, N721, N751, N754, N758,
N760, N761, N764, N767, N786, N863, S, SF, S200
Recommended Use and Restrictions
Recommended Use: Input in the production of glass reinforcement products.
Restrictions: No information available.
Supplier s Details
Supplier Information:
Superior Huntingdon Composites, LLC
294 Industrial Park Rd.
Vanceburg, KY 41179
Telephone: 1-606-796-6789
(8:00 am to 5:00 pm ET, weekdays)
Emergency Phone Numbers:
Emergency Contacts: 1-606-796-6789
Health and Technical Contacts:
1-606-796-6789 (8:00 am to 5:00 pm ET, weekdays)
Classification
This product is not considered hazardous according to the OSHA Hazard Communication Standard 2012 (29
CFR 1910.1200).
GHS Label Elements, Including Precautionary Statements
Emergency Overview: No unusual conditions are expected from this product.
Skin Irritation Fiberglass may cause temporary skin irritation. Individuals should wear long sleeves, gloves
and eye protection when handling material, Cleanse skin with soap and cold water after handling. Wash work
clothes separately and rinse washer.
Dust Irritation A disposable mask designed for nuisance type dusts can be used when handling material in
order to prevent irritation to the nose or throat due to dust or airborne particles.
Section 1: Product and Company Information
Section 2: Hazards Identification
SAFETY DATA SHEET
Page 2 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Common Name CAS No. Wt. %
Fiber Glass (non respirable)*1 65997-17-3 84- 96%
Organic Surface Binder NA 4-16%
A-type chemical composition* Glass Fibers; Lead and Boron free; 18-30 micron average fiber diameter. Organic
Surface Binder (Thermoset Polyester) 4%-16% (typical content). As manufactured, continuous filament glass fibers are
not respirable. Continuous filament glass products that are chopped, crushed or severely mechanically processed
during manufacturing or use may contain a very small amount of respirable particulate, some of which may be glass
shards. See Section 8 of Material Safety Data Sheet for exposure limit data.
*A-glass is composed primarily of oxides of silicon, sodium, calcium and aluminum, fused in an amorphous vitreous state.
The product covered in this SDS is an article and therefore is exempt from listing on the national chemical inventories
in particular on the US EPA Toxic Substances Control Act (TSCA).
Component Related Regulatory Information
This product may be regulated, have exposure limits or other information identified as the
following: glass wool fiber, fibrous glass and nuisance particulates.
Component Information/Information on Non-Hazardous Components
No additional information available.
Description of First Aid Measures
Inhalation:
Move person to fresh air. Seek medical attention if irritation persists.
Skin Contact:
For skin contact, wash with mild soap and cold water. Do not wash with warm water because
this will open up the pores of the skin, which will cause further penetration of the fibers. Use a
washcloth to help remove fibers. To avoid further irritation, do not rub or scratch affected areas.
Rubbing or scratching may force fibers into skin. If irritation persists get medical attention.
Eye Contact:
Immediately flush eyes with plenty of running water for at least 15 minutes. If irritation persists
get medical attention.
Ingestion:
Ingestion of this material is unlikely. If it does occur, gently wipe or rinse mouth with water. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. Contact po ison control center, emergency
room or physician for treatment.
Section 3: Composition Information
Section 4: First Aid Measures
SAFETY DATA SHEET
Page 3 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Suitable Extinguishing Media
Water fog, foam, carbon dioxide (CO2) or dry chemical. Use extinguishers appropriate for the surrounding
area, paying close attention to electrical equipment or dissimilar combustibles stored in adjacent areas.
Specific Hazards Arising from Material
Hazardous decomposition will not occur. Primary byproducts of combustion are CO, CO2 Carbon particulate
and glass fibers. Other undetermined compounds could be released in small quantities.
Special Protective Equipment
Use self-contained breathing apparatus (SCBA) and full bunker turnout gear in a sustained fire.
Additional Information
Flash point: None Flash point method: Not determined
Upper flammability limit: None Lower flammability limit: None
Flammability class: Non-flammable Vapor density (Air=1): N/A
Unusual fire and
Explosion hazards None known
Containment Procedures
This material will settle out of air. If concentrated on land, it can be scooped up for disposal as non-
hazardous waste. This material will sink and disperse along the bottom of waterways and ponds.
It cannot easily be removed after it is waterborne; however, the material is non-hazardous in water.
Clean-up Procedures
Scoop up material and put into a suitable container for disposal as a non-hazardous waste.
Response Procedures
Isolate area. Keep personnel away.
Precautions for Safe Handling
Keep product in its packaging, as long as practicable to minimize potential dust generation. Keep
work areas clean. Avoid unnecessary handling of scrap materials. Wear PPE as described in
Section 8.
Storage Procedures
For optimum performance store in area at or below 25 degrees C with relative humidity less than 65%.
Section 5: Fire Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
SAFETY DATA SHEET
Page 4 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Exposure Limits
Fiber Glass Continuous Filament (65997-17-3)
Ingredient OSHA PEL
(8-hr TWA)
ACGIH TLV
(8-hr TWA)
Non-respirable fibers and particulate 15 mg/m
3
(total dust)(a) 5 mg/m
3
(inhalable fraction)
Respirable particulate 5 mg/m
3
(respirable dust)(b) None
Respirable particulate with fiber like
dimensions (glass shards)
None Established None Established
Engineering Measures
Ventilation: General dilution ventilation and/or local exhaust ventilation should be provided as necessary
to maintain exposures below occupational exposure limits.
Individual Protection Measures, Such as Personal Protective Equipment
Respiratory Protection: A properly fitted NIOSH approved N 95 series disposable dust respirator such as
the 3M model 8210 (model 8271 in high humidity environments) or equivalent should be used when high
dust levels are encountered, the level of glass fibers in the air exceeds the occupational exposure limits,
or if irritation occurs.
Skin Protection: Normal work clothing (long sleeved shirts and long pants) is recommended. Use
impervious gloves. Skin irritation is known to occur chiefly at pressure points such as around neck,
wrists, waist, and between fingers.
Eye/Face Protection Equipment: Wear safety glasses with side shields, goggles or face shield.
OTHER PROTECTIVE EQUIPMENT: None required. Barrier creams can be of help to ultra-sensitive
individuals. It is recommended to wash work clothing separate from other laundry. Rinse washer at end of
cycle.
Section 8: Exposure Controls and Personal Protection
SAFETY DATA SHEET
Page 5 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Information on Basic Physical and Chemical Properties
Appearance: White / off white
Odor: None
Physical State: Solid
pH: N/A
Vapor pressure (mm Hg @ 20
0
C): N/A
Vapor Density (Air = 1): N/A
Boiling Point: N/A
Solubility (H2O): Insoluble
Specific Gravity (Water =1): 2.5 2.6
Freezing Point: N/A
Evaporation Rate (n-Butyl Acetate=1): N/A
Viscosity: N/A
VOC: <0.4%
Melting (Softening) Point: >650
0
C
Partition Coefficient N/A
Auto Ignition Temperature N/A
Chemical Stability
This is a stable material.
Hazardous Reactions
None known
Conditions to Avoid
None known
Incompatible Materials
None known
Hazardous Decomposition Products
Fiberglass alone will not burn. But smoking of the sizings or binders may occur in
temperature environments exceeding 205 degrees C. These same ingredients will release
carbon monoxide and carbon dioxide in a sustained fire situation. See Section 5 of SDS for
information on hazardous combustion products.
Section 9: Physical and Chemical Properties
Section 10: Stability and Reactivity
SAFETY DATA SHEET
Page 6 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
Information on likely routes of exposure
Inhalation May cause coughing, nose and throat irritation, and sneezing. People with pre-existing
respiratory conditions may experience difficulty breathing, congestion and chest tightness.
Eye contact May cause temporary eye irritation.
Skin contact May cause temporary irritation to the affected area.
Ingestion May cause irritation of the throat, stomach and gastrointestinal tract. Not an expected route of
exposure.
Symptoms related to the physical, chemical and toxicological characteristics
Symptoms May cause temporary irritation to the affected area.
Delayed and immediate effects and chronic effects from short and long term exposure
Fiber Glass Continuous Filament: The International Agency for Research on Cancer (IARC) in
June, 1987, categorized fiber glass continuous filament as not classifiable with respect to human
carcinogenicity (Group 3). The evidence from human as well as animal studies was evaluated by
IARC as insufficient to classify fiber glass continuous filament as a possible, probable, or
confirmed cancer causing material.
The American Conference of Governmental Industrial Hygienists (ACGIH) A4 classification, not
classifiable as a human carcinogen, for respirable continuous filament glass fibers is based on
inadequate data in terms of its carcinogenicity in humans and/or animals.
For respirable continuous filament glass fibers, a TLV-TWA of 1 fiber/cc was adopted to protect
workers against mechanical irritation. The TLV-TWA of 5 mg/m3 was adopted for nonrespirable
glass filament fiber, measured as inhalable dust, to prevent mechanical irritation of the upper
respiratory tract.
Note: There are no known chronic health effects connected with long-term use or contact
with these products.
Products that are chopped, crushed or severely mechanically processed during manufacture or
use may contain a very small amount of respirable glass fiber-like fragments. NIOSH defines
respirable fibers as greater than 5 microns in length and less than 3 microns in diameter with an
aspect ratio of > 5:1(length-to-width ratio).
Chronic Study in Animals
A laboratory test was conducted with a different product (special application glass fiber) with
comparable composition and durability. Test animals breathing very high concentrations of
respirable fibers on a long-term basis developed fibrosis, lung cancer and mesothelioma.
About 23% of the rats (n=43) exposed to 1022 f/cc for 5 hrs/day, 7 days/week for 52 weeks
developed lung tumors (adenoma and carcinoma). Five percent (5%) of the unexposed control
group (n=38) developed lung tumors (adenoma and carcinoma).
Five percent (5%) of the rats in the exposed group developed mesothelioma and 12.5% developed
advanced fibrosis. None of the rats in the unexposed control group developed mesothelioma and
0.6 % developed advance fibrosis.
Section 11: Toxicological Information
SAFETY DATA SHEET
Page 7 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
A second group of rats was exposed to a similar concentration of asbestos (respirable amosite
fibers) for 5 hours/day, 7 days a week for 52 weeks. 38% of the rats developed lung tumors
(adenoma and carcinoma) and 5 % developed mesothelioma. 14.5 % developed advance fibrosis.
Importantly, this result, that is similar disease rates for the special application fiber and amosite
asbestos, had been predicted in a 1996 scientific paper (Inhal. Tox. 8:323-343, 1996 ref). That
paper specifically stated that in rats all fibers which were durable enough to remain in a rat lung
f o r two (2) years or more, would produce the same disease rates if the exposures were the same.
While the special application fiber is much less durable than asbestos, it is stable enough to
remain in the rat lung for more than the two (2) year time period. The results of the current study
are therefore not unexpected, and they do not indicate that similar disease rates would be seen in
longer lived species or humans, exposed to these fibers.
Component Carcinogenicity
Fiber Glass Continuous Filament (65997-17-3)
ACGIH: A4 Not classified as a human carcinogen.
IARC: Group 3 not classifiable as to its carcinogenicity to humans October 2001
meeting
No data available for this product. This material is not anticipated to harm animals, plants or fish.
Waste Disposal Methods
Material if discarded, is not expected to be a characteristic hazardous waste under RCRA. Dispose of
waste material and packaging materials according to Local, State, Federal and Provincial Environmental
Regulations.
US DOT/TDG (Canada) Information
Shipping Name: Not regulated for transport
Hazard Class: None
UN/NA #: None
Packing Group: None
Required Labels: None
Marine Pollutant: None
Additional Transportation Regulations:
No additional information available.
Section 12: Ecological Information
Section 13: Disposal Considerations
Section 14: Transport Information
SAFETY DATA SHEET
Page 8 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
US Federal Regulations:
A: General Product Information
No additional information available.
B: Component Analysis
No additional information available.
The following is provided to aid in the preparation of SARA 311 and 312 reports.
Acute Health Hazard: Yes
Chronic Health Hazard: No
Fire Hazard: No
Sudden Release of Pressure Hazard: No
Reactive Hazard: No
C: Clean Air Act
There are no components that appear on the Clean Air Act 1990 Hazardous Air
Pollutants List.
State Regulations:
A: General Product Information
No additional information available.
B: Component Analysis – State
None
Other Regulations:
A: General Product Information
No additional information available.
B: Component Analysis – Inventory
Component
Fiber Glass (Continuous Filament)
CAS #
65997-17-3
TSCA
Yes
DSL
Yes
EINECS
266-046-0
C: Component Analysis WHMIS IDL
The following components are identified under the Canadian Hazardous Products Act
Ingredient Disclosure List: None
WHMIS Status: Not controlled
WHMIS Classification: None
D: Other Government Regulations
Continuous filament glass products are not classified as a Dangerous Substance or a
Dangerous Preparations under the EU Directive 88/379/EEC.
1. Classification and Labeling (EEC)
This product is not required to be labeled under Council Directives
88/379EEC, 67/548/EEC, Annex I, and 97/69/EC.
2. Certification statement for:
Directive 2002/95/EC for RoHS and Directive 2002/96/EC for WEEE
Based on our current glass analyses, HFP certifies that our fiberglass mats are
well below the requirements of both of these Directives.
Section 15: Regulatory Information
SAFETY DATA SHEET
Page 9 of 9
Product Name: Surmat and Conformat Effective: 10/08/18
Supersedes: 08/07/18
HMIS and NFPA Hazard Ratings:
Category HMIS NFPA
Acute Health 1 1
Flammability 0 0
Reactivity 0 0
NFPA Unusual Hazards: None.
HMIS Personal Protection: To be supplied by user depending upon use.
Reasonable care has been taken in the preparation of this information, but the manufacturer makes no
warranty of the merchantability or any other warranty, expressed or implied, with respect to this information.
The manufacturer makes no representations and assumes no liability for any direct, incidental or
consequential damages resulting from its use.
Section 16: Other Information
by | Sep 27, 2025
INDEX
27M8
27M80D0375
27M80D0500
27M80D0750
27M80D1000
27M80P0375
27M80P0500
27M80P0750
27M80P1000
27M80PL625
27M80VP20
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
INDEX
27M8
27M80D0375
27M80D0500
27M80D0750
27M80D1000
27M80P0375
27M80P0500
27M80P0750
27M80P1000
27M80PL625
27M80VP20
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
INDEX
27M8
27M80D0375
27M80D0500
27M80D0750
27M80D1000
27M80P0375
27M80P0500
27M80P0750
27M80P1000
27M80PL625
27M80VP20
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
by | Sep 27, 2025
SAFETY DATA SHEET
Page 1 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Material Name: Continuous Filament Mat
GHS Product Identifier
Product Name(s): All Continuous Filament Mat Products
Other Means of Identification
Synonyms: CFM, EP Mat, GP Mat, M8610, M8612, M8615, M8620, M8635,
M8636, M8643, M8675, M8686
Recommended Use and Restrictions
Recommended Use: Input in the production of glass reinforcement products.
Restrictions: No information available.
Supplier s Details
Supplier Information:
Superior Huntingdon Composites, LLC
1200 Susquehanna Ave.
Huntingdon, PA 16652
Telephone: 1-814-641-8000
(8:00 am to 5:00 pm ET, weekdays)
Emergency Phone Numbers
Emergency Contacts:
CHEMTREC (24 hours every day): 1-800-424-9300
Health and Technical Contacts:
1-606-796-6789 (8:00 am to 5:00 pm ET, weekdays)
Classification
This product is not considered hazardous according to the OSHA Hazard Communication Standard 2012
(29 CFR 1910.1200).
GHS Label Elements, Including Precautionary Statements
Emergency Overview
No unusual conditions are expected from this product
Appearance: White / off white Physical State: Solid Odor: None
Section 1: Product and Company Information
Section 2: Hazards Identification
SAFETY DATA SHEET
Page 2 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Common Name CAS No. Wt. %
Fiber Glass (non-respirable)*1 65997-17-3 85 – 100%
Organic Surface Binder NA 0 – 15%
Note: *1 As manufactured, continuous filament glass fibers are not respirable. Continuous filament
glass products that are chopped, crushed or severely mechanically processed during manufacturing or
use may contain a very small amount of respirable particulate, some of which may be glass shards.
See Section 8 of Material Safety Data Sheet for exposure limit data.
Component Related Regulatory Information
This product may be regulated, have exposure limits or other information identified as the
following: glass wool fiber, fibrous glass and nuisance particulates.
Component Information/Information on Non-Hazardous Components
No additional information available.
Description of First Aid Measures
Inhalation:
Move person to fresh air. Seek medical attention if irritation persists.
Skin Contact:
For skin contact, wash with mild soap and cold water. Do not wash with warm water because this will open
up the pores of the skin, which will cause further penetration of the fibers. Use a washcloth to help remove
fibers. To avoid further irritation, do not rub or scratch affected areas. Rubbing or scratching may force
fibers into skin. If irritation persists, get medical attention.
Eye Contact:
Immediately flush eyes with plenty of running water for at least 15 minutes. If irritation persists, get medical
attention.
Ingestion:
Ingestion of this material is unlikely. If it does occur, watch the person for several days to make
sure that intestinal blockage does not occur.
Section 3: Composition Information
Section 4: First Aid Measures
SAFETY DATA SHEET
Page 3 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Suitable Extinguishing Media
Water fog, foam, carbon dioxide (CO2) or dry chemical.
Specific Hazards Arising From Material
Primary combustion products are carbon monoxide, hydrogen, carbon dioxide and water. Other
undetermined compounds could be released in small quantities.
Special Protective Equipment
Use self-contained breathing apparatus (SCBA) and full bunker turnout gear in a sustained fire.
Additional Information
Flash Point: None Flash Point Method: Not determined
Upper Flammability Limit: None Lower Flammability Limit: None
Flammability Class: Non-flammable Vapor density (Air=1): N/A
Unusual Fire and
Explosion Hazards: None known
Containment Procedures
This material will settle out of air. If concentrated on land, it can be scooped up for disposal as non-
hazardous waste. This material will sink and disperse along the bottom of waterways and ponds. It cannot
easily be removed after it is waterborne; however, the material is non-hazardous in water.
Clean-up Procedures
Scoop up material and put into a suitable container for disposal as a non-hazardous waste.
Response Procedures
Isolate area. Keep personnel away.
Precautions for Safe Handling
Keep product in its packaging as long as practicable to minimize potential dust generation. Keep work
areas clean. Avoid unnecessary handling of scrap materials. Wear PPE as described in Section 8.
Storage Procedures
No special procedures.
Section 5: Fire Fighting Measures
Section 6: Accidental Release Measures
Section 7: Handling and Storage
SAFETY DATA SHEET
Page 4 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Exposure Limits
Fiber Glass Continuous Filament (65997-17-3)
Ingredient OSHA PEL (8-hr TWA) ACGIH TLV (8-hr TWA)
Non-respirable fibers and particulate 15 mg/m
3
(total dust)(a) 5 mg/m
3
(inhalable fraction)
Respirable particulate 5 mg/m
3
(respirable dust)(b) None
Respirable particulate with fiber like
dimensions (glass shards)
None established None established
Engineering Measures
Ventilation: General dilution ventilation and/or local exhaust ventilation should be provided as necessary
to maintain exposures below occupational exposure limits.
Individual Protection Measures Such as Personal Protective Equipment
Respiratory Protection: A properly fitted NIOSH approved N 95 series disposable dust respirator such as
the 3M model 8210 (model 8271 in high humidity environments) or equivalent should be used when high
dust levels are encountered, the level of glass fibers in the air exceeds the occupational exposure limits, or
if irritation occurs.
Skin Protection: Normal work clothing (long sleeved shirts and long pants) is recommended. Use
impervious gloves. Skin irritation is known to occur chiefly at pressure points such as around neck, wrists,
waist, and between fingers.
Eye/Face Protection Equipment: Wear safety glasses with side shields, goggles, or face shield.
Information on Basic Physical and Chemical Properties
Appearance: White / off white
Odor: None
Physical State: Solid
pH: N/A
Vapor pressure (mm Hg @ 20
0
C): N/A
Vapor Density (Air = 1): N/A
Boiling Point: N/A
Solubility (H2O): Insoluble
Specific Gravity (Water = 1): 2.6
Freezing Point: N/A
Evaporation Rate (n-Butyl Acetate = 1): N/A
Viscosity: N/A
VOC: <0.4%
Section 8: Exposure Controls and Personal Protection
Section 9: Physical and Chemical Properties
SAFETY DATA SHEET
Page 5 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Melting (Softening) Point: >800 C
Partition Coefficient: N/A
Auto Ignition Temperature: N/A
Chemical Stability
This is a stable material.
Hazardous Reactions
None known
Conditions to Avoid
None known
Incompatible Materials
None known
Hazardous Decomposition Products
Sizings or binders may decompose in a fire. See Section 5 of SDS for information
on hazardous combustion products.
Information on Likely Routes of Exposure
Inhalation May cause coughing, nose and throat irritation, and sneezing. People with pre-existing
respiratory conditions may experience difficulty breathing, congestion and chest tightness.
Eye Contact May cause temporary eye irritation.
Skin Contact May cause temporary irritation to the affected area.
Ingestion May cause irritation of the throat, stomach, and gastrointestinal tract. Not an expected
route of exposure.
Symptoms Related to the Physical, Chemical, and Toxicological Characteristics
Symptoms May cause temporary irritation to the affected area.
Delayed and Immediate Effects and Chronic Effects from Short- and Long-Term Exposure
Fiber Glass Continuous Filament: The International Agency for Research on Cancer (IARC) in June,
1987, categorized fiber glass continuous filament as not classifiable with respect to human carcinogenicity
(Group 3). The evidence from human as well as animal studies was evaluated by IARC as insufficient to
classify fiber glass continuous filament as a possible, probable, or confirmed cancer causing material.
The American Conference of Governmental Industrial Hygienists (ACGIH) A4 classification, not classifiable
as a human carcinogen, for respirable continuous filament glass fibers is based on inadequate data in terms
of its carcinogenicity in humans and/or animals.
For respirable continuous filament glass fibers, a TLV-TWA of 1 fiber/cc was adopted to protect workers
against mechanical irritation. The TLV-TWA of 5 mg/m3 was adopted for nonrespirable glass filament fiber,
measured as inhalable dust, to prevent mechanical irritation of the upper respiratory tract.
Section 10: Stability and Reactivity
Section 11: Toxicological Information
SAFETY DATA SHEET
Page 6 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
Note: There are no known chronic health effects connected with long-term use or contact with these
products.
Products that are chopped, crushed or severely mechanically processed during manufacture or use may
contain a very small amount of respirable glass fiber-like fragments. NIOSH defines respirable fibers as
greater than 5 microns in length and less than 3 microns in diameter with an aspect ratio of > 5:1(length-to-
width ratio).
Chronic Study in Animals
A laboratory test was conducted with a different product (special application glass fiber) with comparable
composition and durability. Test animals breathing very high concentrations of respirable fibers on a long-
term basis developed fibrosis, lung cancer and mesothelioma.
About 23% of the rats (n=43) exposed to 1022 f/cc for 5 hrs/day, 7 days/week for 52 weeks developed lung
tumors (adenoma and carcinoma). Five percent (5%) of the unexposed control group (n=38) developed lung
tumors (adenoma and carcinoma).
Five percent (5%) of the rats in the exposed group developed mesothelioma and 12.5% developed
advanced fibrosis. None of the rats in the unexposed control group developed mesothelioma and 0.6 %
developed advance fibrosis.
A second group of rats was exposed to a similar concentration of asbestos (respirable amosite fibers) for 5
hours/day, 7 days a week for 52 weeks. 38% of the rats developed lung tumors (adenoma and carcinoma)
and 5 % developed mesothelioma. 14.5 % developed advance fibrosis.
Importantly, this result, that is similar disease rates for the special application fiber and amosite asbestos,
had been predicted in a 1996 scientific paper (Inhal. Tox. 8:323-343, 1996 ref). That paper specifically
stated that in rats all fibers which were durable enough to remain in a rat lung f o r two (2) years or more,
would produce the same disease rates if the exposures were the same. While the special application fiber is
much less durable than asbestos, it is stable enough to remain in the rat lung for more than the two (2) year
time period. The results of the current study are therefore not unexpected, and they do not indicate that
similar disease rates would be seen in longer lived species or humans, exposed to these fibers.
Component Carcinogenicity
Fiber Glass Continuous Filament (65997-17-3)
ACGIH: A4 Not classified as a human carcinogen
IARC: Group 3 not classifiable as to its carcinogenicity to humans October 2001 meeting
No data available for this product. This material is not anticipated to harm animals, plants, or fish.
Waste Disposal Methods
Material, if discarded, is not expected to be a characteristic hazardous waste under RCRA. Dispose of
waste material and packaging materials according to Local, State, Federal and Provincial Environmental
Regulations.
Section 12: Ecological Information
Section 13: Disposal Considerations
SAFETY DATA SHEET
Page 7 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
US DOT/TDG (Canada) Information
Shipping Name: Not regulated for transport
Hazard Class: None
UN/NA #: None
Packing Group: None
Required Labels: None
Marine Pollutant: None
Additional Transportation Regulations:
No additional information available.
US Federal Regulations
A: General Product Information
No additional information available.
B: Component Analysis
No additional information available.
The following is provided to aid in the preparation of SARA 311 and 312 reports.
Acute Health Hazard: Yes
Chronic Health Hazard: No
Fire Hazard: No
Sudden Release of Pressure Hazard: No
Reactive Hazard: No
C: Clean Air Act
There are no components that appear on the Clean Air Act 1990 Hazardous Air Pollutants List.
State Regulations
A: General Product Information
No additional information available.
B: Component Analysis – State
None
Other Regulations
A: General Product Information
No additional information available.
B: Component Analysis – Inventory
Component
Fiber Glass
(Continuous Filament)
CAS #
65997-17-3
TSCA
Yes
DSL
Yes
EINECS
266-046-0
Section 14: Transport Information
Section 15: Regulatory Information
SAFETY DATA SHEET
Page 8 of 8
Product Name: Continuous Filament Mat Effective: 10/08/18
Supersedes: 08/07/17
C: Component Analysis WHMIS IDL
The following components are identified under the Canadian Hazardous Products Act Ingredient
Disclosure List: None
WHMIS Status: Not controlled
WHMIS Classification: None
D: Other Government Regulations
Continuous filament glass products are not classified as a Dangerous Substance or a Dangerous
Preparations under the EU Directive 88/379/EEC.
1. Classification and Labeling (EEC)
This product is not required to be labeled under Council Directives 88/379EEC, 67/548/EEC,
Annex I, and 97/69/EC.
2. Certification Statement for:
Directive 2002/95/EC for RoHS and Directive 2002/96/EC for WEEE
Based on our current glass analyses, HFP certifies that our fiberglass mats are well below the
requirements of both of these Directives.
HMIS and NFPA Hazard Ratings
Category HMIS NFPA
Acute Health 1 1
Flammability 0 0
Reactivity 0 0
NFPA Unusual Hazards
None
HMIS Personal Protection
To be supplied by user depending upon use.
Reasonable care has been taken in the preparation of this information, but the manufacturer makes no warranty of
the merchantability or any other warranty, expressed or implied, with respect to this information. The manufacturer
makes no representations and assumes no liability for any direct, incidental, or consequential damages resulting
from its use.
Section 16: Other Information
by | Sep 27, 2025
INDEX
27M8
27M80D0375
27M80D0500
27M80D0750
27M80D1000
27M80P0375
27M80P0500
27M80P0750
27M80P1000
27M80PL625
27M80VP20
SAFETY DATA SHEET
Page 1 of 6 CORECELL
TM
FOAM
1 Product and Company Identification
Product identification: CORECELL
TM
Foam A,K,M,P,S,T series
Application of the material: Structural rigid foam panel
Supplier/Manufacturer: Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809
USA Tel: 401-396-5008
For additional information : Health, Safety and Environment department:
Email:
regulatory@gurit.com
Emergency phone number: 1-800-424-9300
Date of issue: 28/05/15
2 Hazards Identification
THIS PRODUCT WHEN SOLD IS NOT CLASSIFIED AS A HAZAR DOUS CHEMICAL PER OSHA HCS-2012.
However, when subject to machining operations under normal condition of use, the release of dust may pose a
combustible dust risk if work is not performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
– Prevent dust accumulations to minimize explosion hazard.
– Keep away from all ignition sources including heat, sparks and flame.
3 Composition/Information on Ingredients
Corecell
TM
is a structural expanded polymer product having some of the characteristics of SAN copolymer
CAS 9003-54-7. The chemicals listed below will be released when processing the product. Trace levels of
residual acrylonitrile monomers is also expected to be released in small amounts during processing operations.
Chemical name CAS number % concentration
Acetone 67-64-1 1 5 %
Hexane isomers 92112-69-1 1 5 %
SAFETY DATA SHEET
Page 2 of 6 CORECELL
TM
FOAM
6 Accidental Release Measures
Personal precautions, protective equipment and emergency procedures: No special measures required.
Clean up methods and materials: Vacuum or sweep up material.
5 Fire-Fighting Measures
Suitable extinguishing media: Water, foam, carbon dioxide or dry chemical fire extinguishers.
Specific hazards: Formation of toxic gases will occur during thermal decomposition or in case
of fire. Hazardous combustion products include Carbon monoxide, Carbon
dioxide, Nitrogen oxides, Hydrogen cyanide and Hydrogen bromide.
Protective equipment: Wear fully protective suit with self contained breathing apparatus (SCBA)
with a face-piece operated in positive pressure mode. Reduce direct exposure
to smoke and fumes.
4 First-Aid Measures
Eye contact: If dust particles become lodged in eyes, rinse immediately with plenty of water. If symptoms
persist, consult a physician.
Skin contact: No need for specific measures.
Ingestion: In case of persistent symptoms, consult a physician.
Inhalation: If affected by dust or vapors, remove individual to fresh air. If condition persists, obtain
medical attention.
Most important symptoms/effects: Upper respiratory system irritation.
Immediate medical attention and special treatment: No special requirements.
7 Handling and Storage
Handling: Machining operations which can produce dust should be properly fitted to a dust collection system.
Prevent formation of dust that could create explosive atmospheres.
Provide adequate general ventilation and local exhaust ventilation during machining and processing
operations to control airborne contaminant exposure.
Processing the product through heated equipment or tools could enhance the release of organic vapors.
Accumulation of static electricity charges may appear during machining operations or handling of the
material. Ensure all machining equipment are bonded and grounded to reduce static energy build-up.
Static electricity might give an unpleasant sensation but is not a possible source of ignition.
Storage: Protect from heat and open flames. This product is a combustible material and should be stored
according to the national or local Fire Code.
Trace levels of organic vapors may be released for a while after machining operations. Ensure good
mechanical ventilation for storage of large quantities of the processed product.
Date of issue: 28/05/15
SAFETY DATA SHEET
Page 3 of 6 CORECELL
TM
FOAM
8 Exposure Controls / Personal Protection
Exposure limits :
Ingredient name CAS# OSHA (PEL) ACGIH (TLV)
Acetone 67-64-1 1000 ppm (TWA)
500 ppm
(TWA)
;
750 ppm (STEL)
Hexane isomers 92112-69-1 –
500 ppm
(TWA)
;
1000 ppm (STEL)
Particulates Not Otherwise Regulated – 15 mg/m
3
(TWA) –
Note: Dust fraction size from machining operations will not constitute a respirable dust issue.
Engineering controls: Provide general and local exhaust ventilation to control airborne contaminant.
Personal protection equipments:
– Wear safety glasses/goggles.
– Wear general purpose gloves and protective work clothing.
– Wear approved NIOSH respirator with organic vapour cartridge if vapors are not adequately
controlled. Breathing protection recommended if excessive dust is generated.
General measures: Handle product with good industrial and safety practices.
Date of issue: 28/05/15
9 Physical and Chemical Properties
Physical state: Solid
Color: Yellow
Odor: Nearly odorless
Flash point: Not applicable
Melting point: Softening point 70
o
C – 120
o
C (158
o
F – 248
o
F)
Thermal degradation: >180
o
C (356
o
F)
Boiling point: Not applicable
Ignition temperature: Not available
Relative density: 0.05-0.5 g/cm
3
Vapor pressure: Not applicable
Solubility in water: Insoluble
Note: Items not included in this section are not available or not relevant to this product.
SAFETY DATA SHEET
Page 4 of 6 CORECELL
TM
FOAM
11 Toxicological Information
Toxicological data:
Substance LC50 (Inhalation Rat) LD50 (Oral Rat)
Acetone 21 000 ppm (8h) 5800 mg/kg
Route of exposure (when processing product): inhalation, eye contact.
Dust and vapors released when machining the product may cause irritation to upper
respiratory tract.
Dust and vapors released when machining the product may cause eye irritation.
Product is not expected to present harmful effects if swallowed.
Sensitization: No sensitizing effects known.
Chronic toxicity: No data available.
The product has not been tested as a whole for its possible chronic effects.
Additional information: It is recommended that pregnant or breastfeeding women should not be working in
areas where this product is processed.
Date of issue: 28/05/15
10 Stability and Reactivity
Chemical stability: This product is stable.
Conditions to avoid: Do not overheat to avoid thermal decomposition. Keep away from open flames.
Chemical reactivity: No relevant information available.
Possibility of hazardous reactions: No hazardous reactions known.
Incompatibility with other substances: Strong oxidizers, strong acids and bases will damage the product.
Hazardous decomposition products: Decomposition products include but are not limited to: Residual
monomers, Carbon monoxide, Carbon dioxide, Nitrogen oxides,
Hydrogen cyanide and Hydrogen bromide.
SAFETY DATA SHEET
Page 5 of 6 CORECELL
TM
FOAM
Regulatory status: This product is subject to hazardous classification only if machining or processing
the product is considered normal conditions of use. See safety label at the end of this
Safety Data Sheet as required by OSHA HCS.
TSCA (USA): All substances are listed.
California Prop. 65: This product contains trace quantities of a substance known to the State of California
to cause cancer: Acrylonitrile.
15 Regulatory Information
14 Transport Information
Regulatory status
(DOT; IMDG/IATA): Not regulated for transport.
13 Disposal Considerations
Waste disposal: Product is stable and may be disposed of in approved landfills. Toxic gases will be
generated if product is burned. Disposal of waste material should be done according to
applicable Federal and State regulations.
16 Other Information
References: 29CFR 1910.1200 OSHA Hazard Communication Standard (2012);
Notice to the reader:
To the best of our knowledge, the information contained herein is accurate at the date of its publication.
However, this shall not constitute a guarantee for any specific product features and shall not establish a
legally valid contractual relationship.
12 Ecological Information
Ecotoxicity data: No data available.
Persistence, biodegradability and mobility: No data available.
Date of issue: 28/05/15
SAFETY LABEL
Page 6 of 6 CORECELL
TM
FOAM
Corecell
TM
Foam
When this product is subject to processing methods under normal condition
of use, the release of dust may pose a combustible dust risk if work is not
performed under good industrial and safety practices.
WARNING!
May form combustible dust in the air.
Prevent dust accumulations to minimize explosion hazard.
Keep away from all ignition sources including heat, sparks and flame.
Gurit (USA) Inc.
115 Broadcommon Road
Bristol, Rhode Island 02809 USA
Tel: 401-396-5008
