by | Sep 27, 2025
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Issue date: 12/5/2024
12/5/2024 (Issue date) EN (English) 1/13
SECTION 1: Identification
1.1. Identification
Product form : Mixture
Trade name : Ultra Premium White LAM Resin 2000
CAS-No. : mixture
Product code : 30P-430
Formula : N/A
Other means of identification : Unsaturated Polyester Resin Product
Corrosion-Resistant Resin
1.2. Recommended use and restrictions on use
Use of the substance/mixture : Laminating
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909-546-1162
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids, Category 3 H226 Flammable liquid and vapour.
Acute toxicity (inhal.), Category 4 H332 Harmful if inhaled.
Skin corrosion/irritation, Category 2 H315 Causes skin irritation.
Serious eye damage/eye irritation, Category 2 H319 Causes serious eye irritation.
Reproductive toxicity, Category 2 H361 Suspected of damaging fertility or the unborn child.
Specific target organ toxicity Single exposure, Category 3,
Respiratory tract irritation
H335 May cause respiratory irritation.
Specific target organ toxicity Repeated exposure, Category 1 H372 Causes damage to organs through prolonged or repeated
exposure.
Full text of H-statements: see section 16
2.2. GHS Label elements, including precautionary statements
GHS US labelling
Hazard pictograms (GHS US) :
Signal word (GHS US) : Danger
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 2/13
Hazard statements (GHS US) : H226 – Flammable liquid and vapour.
H315 – Causes skin irritation.
H319 – Causes serious eye irritation.
H332 – Harmful if inhaled.
H335 – May cause respiratory irritation.
H361 – Suspected of damaging fertility or the unborn child.
H372 – Causes damage to organs through prolonged or repeated exposure.
Precautionary statements (GHS US) : P201 – Obtain special instructions before use.
P202 – Do not handle until all safety precautions have been read and understood.
P210 – Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P233 – Keep container tightly closed.
P240 – Ground/Bond container and receiving equipment.
P241 – Use explosion-proof electrical, lighting, ventilating equipment.
P242 – Use only non-sparking tools.
P243 – Take precautionary measures against static discharge.
P260 – Do not breathe dust/fume/gas/mist/vapours/spray.
P261 – Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 – Wash EXPOSED AREA. thoroughly after handling.
P270 – Do not eat, drink or smoke when using this product.
P271 – Use only outdoors or in a well-ventilated area.
P280 – Wear eye protection, protective clothing, protective gloves.
P302+P352 – If on skin: Wash with plenty of water.
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower.
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308+P313 – If exposed or concerned: Get medical advice/attention.
P312 – Call a poison center or doctor if you feel unwell.
P314 – Get medical advice/attention if you feel unwell.
P321 – Specific treatment (see supplemental first aid instruction on this label).
P332+P313 – If skin irritation occurs: Get medical advice/attention.
P337+P313 – If eye irritation persists: Get medical advice/attention.
P362+P364 – Take off contaminated clothing and wash it before reuse.
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish.
P403+P233 – Store in a well-ventilated place. Keep container tightly closed.
P403+P235 – Store in a well-ventilated place. Keep cool.
P405 – Store locked up.
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS..
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substances
Not applicable
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 3/13
3.2. Mixtures
Name Product identifier % GHS-US classification
styrene, inhibited CAS-No.: 100-42-5 44 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2, H319
Repr. 2, H361
STOT RE 1, H372
Aquatic Chronic 3, H412
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible). IF exposed or concerned: Get medical advice/attention. Call a
poison center or a doctor if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe
fresh air. Allow the victim to rest. Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER/doctor if you feel unwell. Call a poison center or a doctor if you feel
unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Take off immediately all contaminated clothing. Wash with plenty
of water/ . Wash contaminated clothing before reuse. If skin irritation occurs: wash throughly for
five minutes. seek medical attention. Get medical advice/attention. Specific treatment (see seek
medical attention. on this label). If skin irritation or rash occurs: Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center or a doctor if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Sand. Water spray. Dry powder. Foam. Carbon dioxide.
Unsuitable extinguishing media : Do not use a heavy water stream.
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 4/13
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapour. Flammable liquid and vapour.
Explosion hazard : May form flammable/explosive vapour-air mixture.
Reactivity in case of fire : No reactivity hazard other than the effects described in sub-sections below.
Hazardous decomposition products in case of fire : Toxic fumes may be released.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: “Exposure controls/personal
protection”.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapours are flammable.
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 5/13
Precautions for safe handling : Wear personal protective equipment. Wash hands and other exposed areas with mild soap and
water before eating, drinking or smoking and when leaving work. Provide good ventilation in
process area to prevent formation of vapour. No open flames. No smoking. Use only non-
sparking tools. Use only outdoors or in a well-ventilated area. Obtain special instructions before
use. Do not handle until all safety precautions have been read and understood. Eliminate all
ignition sources if safe to do so. Take precautionary measures against static discharge. Keep
away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Ground/bond container and receiving equipment. Flammable vapours may accumulate in the
container. Use explosion-proof equipment. Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store locked up.
Store in a well-ventilated place. Keep cool.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Ultra Premium White LAM Resin 2000 (mixture)
No additional information available
styrene, inhibited (100-42-5)
USA – ACGIH – Occupational Exposure Limits
ACGIH OEL TWA [ppm] 20 ppm
ACGIH OEL STEL [ppm] 40 ppm
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves.
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 6/13
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. [In case of inadequate ventilation] wear respiratory protection.
Personal protective equipment symbol(s):
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Colour : White
Odour : characteristic
Odour threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 293 F
Flash point : 86 F
Relative evaporation rate (butylacetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapour. Flammable liquid and vapour.
Vapour pressure : No data available
Relative vapour density at 20 C : No data available
Relative density : 1.10
Density : 1.1 kg/l
Solubility : No data available
Partition coefficient n-octanol/water (Log Pow) : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive limits : No data available
Explosive properties : No data available
Oxidising properties : No data available
9.2. Other information
VOC content : 480 g/l VOC is based on 100% Evaporation of monomers.
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapour.
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 7/13
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapour. May form
flammable/explosive vapour-air mixture. Flammable liquid and vapour.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) : Not classified
Acute toxicity (dermal) : Not classified
Acute toxicity (inhalation) : Harmful if inhaled.
Ultra Premium White LAM Resin 2000 (mixture)
ATE US (gases) 4500 ppmv/4h
ATE US (vapours) 11 mg/l/4h
ATE US (dust,mist) 1.5 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 oral > 6000 mg/kg bodyweight (Hamster, Male, Weight of evidence, Oral)
LD50 dermal rat > 2000 mg/kg bodyweight (OECD 402: Acute Dermal Toxicity, 24 h, Rat, Male / female,
Experimental value, Dermal)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 Inhalation – Rat 11.8 mg/l air (4 h, Rat, Inconclusive, insufficient data, Inhalation (vapours))
LC50 Inhalation – Rat [ppm] 2770 ppm/4h (Rat; Literature study)
ATE US (vapours) 11 mg/l/4h
Skin corrosion/irritation : Causes skin irritation.
styrene, inhibited (100-42-5)
pH Not applicable
Serious eye damage/irritation : Causes serious eye irritation.
styrene, inhibited (100-42-5)
pH Not applicable
Respiratory or skin sensitisation : Not classified
Germ cell mutagenicity : Not classified
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 8/13
Carcinogenicity : Not classified
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status Reasonably anticipated to be Human Carcinogen
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
STOT-single exposure : May cause respiratory irritation.
STOT-repeated exposure : Causes damage to organs through prolonged or repeated exposure.
styrene, inhibited (100-42-5)
STOT-repeated exposure Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Viscosity, kinematic : No data available
styrene, inhibited (100-42-5)
Viscosity, kinematic 0.8 mm /s
Potential adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Dangerous for the environment. Harmful to aquatic life.
styrene, inhibited (100-42-5)
LC50 – Fish [1] 10 mg/l (OECD 203: Fish, Acute Toxicity Test, 96 h, Pimephales promelas, Flow-through
system, Fresh water, Experimental value, GLP)
EC50 – Crustacea [1] 4.7 mg/l (OECD 202: Daphnia sp. Acute Immobilisation Test, 48 h, Daphnia magna, Flow-
through system, Fresh water, Experimental value, GLP)
ErC50 algae 4.9 mg/l (EPA OTS 797.1050, 72 h, Pseudokirchneriella subcapitata, Static system, Fresh
water, Experimental value, GLP)
12.2. Persistence and degradability
Ultra Premium White LAM Resin 2000 (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Biodegradable in the soil. Readily biodegradable in water.
Chemical oxygen demand (COD) 2.8 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 (Literature study)
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 9/13
12.3. Bioaccumulative potential
Ultra Premium White LAM Resin 2000 (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF – Fish [1] 35.5 (Carassius auratus, Literature study)
Partition coefficient n-octanol/water (Log Pow) 2.96 (Experimental value, OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method, 25 C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (20 C)
Organic Carbon Normalized Adsorption Coefficient
(Log Koc)
2.55 (log Koc, Estimated value)
Ecology - soil Low potential for adsorption in soil.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Regional legislation (waste) : Disposal must be done according to official regulations.
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Sewage disposal recommendations : Do not discharge into drains.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site..
Additional information : Handle empty containers with care because residual vapours are flammable. Flammable
vapours may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT / TDG / IMDG / IATA
14.1. UN number
DOT NA No : UN1866
UN-No. (TDG) : UN1866
UN-No. (IMDG) : 1866
UN-No. (IATA) : 1866
14.2. UN proper shipping name
Proper Shipping Name (DOT) : Resin solution
Proper Shipping Name (TDG) : RESIN SOLUTION
Proper Shipping Name (IMDG) : RESIN SOLUTION
Proper Shipping Name (IATA) : Resin solution
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 10/13
14.3. Transport hazard class(es)
DOT
Transport hazard class(es) (DOT) : 3
Hazard labels (DOT) : 3
TDG
Transport hazard class(es) (TDG) : 3
Hazard labels (TDG) : 3
IMDG
Transport hazard class(es) (IMDG) : 3
Danger labels (IMDG) : 3
IATA
Transport hazard class(es) (IATA) : 3
Danger labels (IATA) : 3
14.4. Packing group
Packing group (DOT) : III
Packing group (TDG) : III
Packing group (IMDG) : III
Packing group (IATA) : III
14.5. Environmental hazards
Other information : No supplementary information available.
14.6. Special precautions for user
DOT
UN-No.(DOT) : UN1866
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 11/13
DOT Special Provisions (49 CFR 172.102) : B1 - If the material has a flash point at or above 38 C (100 F) and below 93 C (200 F), then the
bulk packaging requirements of 173.241 of this subchapter are applicable. If the material has a
flash point of less than 38 C (100 F), then the bulk packaging requirements of 173.242 of this
subchapter are applicable.
B52 - Notwithstanding the provisions of 173.24b of this subchapter, non-reclosing pressure relief
devices are authorized on DOT 57 portable tanks.
IB3 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids
with a vapor pressure less than or equal to 110 kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55
C (1.3 bar at 131 F) are authorized, except for UN2672 (also see Special Provision IP8 in Table
2 for UN2672).
T2 - 1.5 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk temperature
during transport, and tf is the temperature in degrees celsius of the liquid during filling.
DOT Packaging Exceptions (49 CFR 173.xxx) : 150
DOT Packaging Non Bulk (49 CFR 173.xxx) : 173
DOT Packaging Bulk (49 CFR 173.xxx) : 242
DOT Quantity Limitations Passenger aircraft/rail (49
CFR 173.27)
: 60 L
DOT Quantity Limitations Cargo aircraft only (49
CFR 175.75)
: 220 L
DOT Vessel Stowage Location : A - The material may be stowed on deck or under deck on a cargo vessel and on a
passenger vessel.
TDG
UN-No. (TDG) : UN1866
Explosive Limit and Limited Quantity Index : 5 L
Excepted quantities (TDG) : E1
Passenger Carrying Road Vehicle or Passenger
Carrying Railway Vehicle Index
: 60 L
Emergency Response Guide (ERG) Number : 127
IMDG
Special provisions (IMDG) : 223, 955
Packing instructions (IMDG) : P001, LP01
Special packing provisions (IMDG) : PP1
IBC packing instructions (IMDG) : IBC03
Tank instructions (IMDG) : T2
Tank special provisions (IMDG) : TP1
EmS-No. (Fire) : F-E - FIRE SCHEDULE Echo - NON-WATER-REACTIVE FLAMMABLE LIQUIDS
EmS-No. (Spillage) : S-E - SPILLAGE SCHEDULE Echo - FLAMMABLE LIQUIDS, FLOATING ON WATER
Stowage category (IMDG) : A
Properties and observations (IMDG) : Miscibility with water depends upon the composition.
IATA
PCA Excepted quantities (IATA) : E1
PCA Limited quantities (IATA) : Y344
PCA limited quantity max net quantity (IATA) : 10L
PCA packing instructions (IATA) : 355
PCA max net quantity (IATA) : 60L
CAO packing instructions (IATA) : 366
CAO max net quantity (IATA) : 220L
Special provisions (IATA) : A3
ERG code (IATA) : 3L
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
Not applicable
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 12/13
SECTION 15: Regulatory information
15.1. US Federal regulations
Commercial status of components according to the United States Environmental Protection Agency s Toxic Substances Control Act (TSCA):
Name CAS-No. Listing Commercial
status
Flags
styrene, inhibited 100-42-5 Present Active
styrene, inhibited (100-42-5)
Subject to reporting requirements of United States SARA Section 313
Listed on EPA Hazardous Air Pollutant (HAPS)
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard - No
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity
- Male
No significant risk
level (NSRL)
Maximum allowable
dose level (MADL)
Yes No No No 27 g/day
Component State or local regulations
styrene, inhibited(100-42-5) U.S. - Massachusetts - Right To Know List; U.S. - New Jersey - Right to Know Hazardous
Substance List; U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Other information : None.
Ultra Premium White LAM Resin 2000
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
12/5/2024 (Issue date) EN (English) 13/13
Full text of H-statements
H226 Flammable liquid and vapour.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H361 Suspected of damaging fertility or the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause temporary
incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended solids) that can
be ignited under almost all ambient temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change at elevated
temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature conditions.
Includes flammable liquids with flash points below 73 F and boiling points above 100 F. as well
as liquids with flash points between 73 F and 100 F. (Classes IB IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo hazardous
polymerization in the absence of inhibitors.
Personal protection : H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
Safety Data Sheet (SDS), USA
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or
implied including but not limited to any implied warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or
liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
by | Sep 27, 2025
CORROSION ISO RESIN
Unsaturated Polyester Resin
Liquid.
SAFETY DATA SHEET
GHS product identifier
Other means of identification
Product type
Emergency telephone
number (with hours of
operation)
Section 1. Identification
:
:
:
:
Supplier’s details :INTERPLASTIC CORPORATION
1225 Willow Lake Boulevard
St. Paul, MN 55110-5145
651.481.6860
CORROSION ISO RESIN
Relevant identified uses of the substance or mixture and uses advised against
Product code :COR75-AA-861HC
Industrial applications.
CHEMTREC 24-Hour Emergency Telephone
US and Canada 800.424.9300
Outside US and Canada +1 703.741.5970
Section 2. Hazards identification
FLAMMABLE LIQUIDS – Category 3
ACUTE TOXICITY (inhalation) – Category 4
SKIN IRRITATION – Category 2
EYE IRRITATION – Category 2A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) – Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) –
Category 1
Classification of the
substance or mixture
:
Signal word :Danger
Hazard statements :Flammable liquid and vapor.
Harmful if inhaled.
Causes serious eye irritation.
Causes skin irritation.
May cause respiratory irritation.
Causes damage to organs through prolonged or repeated exposure. (hearing organs)
Hazard pictograms :
Precautionary statements
GHS label elements
Percentage of the mixture consisting of ingredient(s) of unknown dermal toxicity: 46.1%
OSHA/HCS status :This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 1/14
CORROSION ISO RESIN COR75-AA-861HC
Section 2. Hazards identification
Prevention :Wear protective gloves. Wear eye or face protection. Keep away from heat, hot
surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-
proof electrical, ventilating, lighting and all material-handling equipment. Use only non-
sparking tools. Take precautionary measures against static discharge. Keep container
tightly closed. Use only outdoors or in a well-ventilated area. Do not breathe vapor. Do
not eat, drink or smoke when using this product. Wash hands thoroughly after handling.
Response :Get medical attention if you feel unwell. IF INHALED: Remove person to fresh air and
keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with
water or shower. IF ON SKIN: Wash with plenty of soap and water. Take off
contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical
attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get
medical attention.
Storage :Store in a well-ventilated place. Keep cool. Store containers in a safe place.
Disposal :Dispose of contents and container in accordance with all local, regional, national and
international regulations. Do not pressurize, cut, weld, braze, solder, drill, grind or
expose containers to heat or sources of ignition.
Hazards not otherwise
classified
:None known.
Section 3. Composition/information on ingredients
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Other means of
identification
:Unsaturated Polyester Resin
Substance/mixture :
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Any concentration shown as exact is based on formula.
VOC content is listed in Section 9.
Environmental composition is shown in Section 15.
styrene <= 46.2 100-42-5
Ingredient name % CAS number
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Get medical attention. If necessary, call a poison center or physician. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Section 4. First aid measures
Eye contact
Inhalation :
:
Description of necessary first aid measures
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention. Buffered baby shampoo will aid in removal of resin.
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 2/14
CORROSION ISO RESIN COR75-AA-861HC
Section 4. First aid measures
Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been swallowed and
the exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention following
exposure or if feeling unwell. Never give anything by mouth to an unconscious person.
If unconscious, place in recovery position and get medical attention immediately.
Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Flush contaminated skin with plenty of water. Remove contaminated clothing and
shoes. Continue to rinse for at least 10 minutes. Get medical attention. Wash clothing
before reuse. Clean shoes thoroughly before reuse.
Skin contact
Ingestion :
:
Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation.
Notes to physician :Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments :No specific treatment.
Most important symptoms/effects, acute and delayed
Inhalation :Harmful if inhaled. May cause respiratory irritation.
No known significant effects or critical hazards.:Ingestion
Skin contact :Causes skin irritation.
Causes serious eye irritation.:Eye contact
Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation Adverse symptoms may include the following:
respiratory tract irritation
coughing
No specific data.
Adverse symptoms may include the following:
irritation
redness
:
:
:
Eye contact :Adverse symptoms may include the following:
pain or irritation
watering
redness
Potential acute health effects
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Section 5. Fire-fighting measures
Use dry chemical, CO , water spray (fog) or foam.
Extinguishing media
Do not use water jet.
Suitable extinguishing
media
:
Unsuitable extinguishing
media
:
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 3/14
CORROSION ISO RESIN COR75-AA-861HC
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a
fire or if heated, a pressure increase will occur and the container may burst, with the risk
of a subsequent explosion. The vapor/gas is heavier than air and will spread along the
ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective
equipment for fire-fighters
:
:
:
Special protective actions
for fire-fighters
:
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
:
:No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Large spill :
Small spill :
Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders:If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".
Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and
place in container for disposal according to local regulations (see Section 13). Dispose
of via a licensed waste disposal contractor. Contaminated absorbent material may pose
the same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal. Wear appropriate respiratory protection.
Wear protective clothing and eye or face protection:
Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Absorb with an inert material and transfer the spilled material and absorbent to an
appropriate waste disposal container. Wear appropriate respirator when ventilation is
inadequate. Wear eye/face protection.
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 4/14
CORROSION ISO RESIN COR75-AA-861HC
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Do not store above the following temperature: 38 C (100.4 F). Store in accordance with
local regulations. Store in a segregated and approved area. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Eliminate all ignition
sources. Separate from oxidizing materials. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. See Section 10 for incompatible
materials before handling or use. Store containers in a safe place.
:
:
Protective measures Put on appropriate personal protective equipment (see Section 8). Do not breathe
vapor or mist. Do not ingest. Avoid contact with eyes, skin and clothing. Use only with
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do
not enter storage areas and confined spaces unless adequately ventilated. Keep in the
original container or an approved alternative made from a compatible material, kept
tightly closed when not in use. Store and use away from heat, sparks, open flame or
any other ignition source. Use explosion-proof electrical (ventilating, lighting and
material handling) equipment. Use only non-sparking tools. Take precautionary
measures against electrostatic discharges. Empty containers retain product residue
and can be hazardous. Do not reuse container.
:
Precautions for safe handling
styrene ACGIH TLV (United States, 3/2017).
TWA: 20 ppm 8 hours.
TWA: 85 mg/m 8 hours.
STEL: 40 ppm 15 minutes.
STEL: 170 mg/m 15 minutes.
OSHA PEL 1989 (United States, 3/1989).
TWA: 50 ppm 8 hours.
TWA: 215 mg/m 8 hours.
STEL: 100 ppm 15 minutes.
STEL: 425 mg/m 15 minutes.
OSHA PEL Z2 (United States, 2/2013).
TWA: 100 ppm 8 hours.
CEIL: 200 ppm
AMP: 600 ppm 5 minutes.
NIOSH REL (United States, 10/2016).
TWA: 50 ppm 10 hours.
TWA: 215 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
STEL: 425 mg/m 15 minutes.
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Control parameters
Occupational exposure limits
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 5/14
CORROSION ISO RESIN COR75-AA-861HC
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles.
Eye/face protection
Respiratory protection :
:
:
Body protection Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product. When there is a risk of ignition from static electricity, wear anti-
static protective clothing. For the greatest protection from static discharges, clothing
should include anti-static overalls, boots and gloves.
:
Environmental exposure
controls
:Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures :
Individual protection measures
Skin protection
Other skin protection :Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Liquid.
Not available.
Sweetish.Odor
pH
VariousColor
Evaporation rate <1 (butyl acetate = 1)
Flash point Closed cup: 31 C (87.8 F)
Not applicable.
0.1 ppmOdor threshold
:
:
:
:
:
:
:
:
Appearance
Boiling point :145 C (293 F)
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 6/14
CORROSION ISO RESIN COR75-AA-861HC
Section 9. Physical and chemical properties
Vapor pressure
Relative density
Vapor density
Solubility
0.9 to 1.3
3.6 [Air = 1]
0.67 kPa (5 mm Hg) [room temperature]
Not available.
Auto-ignition temperature Not available.
Not available.
Viscosity Not available.
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
Lower and upper explosive
(flammable) limits
:Lower: 0.9%
Upper: 6.8%
Solubility in water :Not applicable.
VOC content :46.4 % (w/w) As shipped, including monomers and additives.
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
:
Incompatible materials :
Possibility of hazardous
reactions
:Hazardous reactions or instability may occur under certain conditions of storage or use.
Reactivity :No specific test data related to reactivity available for this product or its ingredients.
Hazardous polymerization may occur under certain conditions of storage or use. Keep
away from heat and direct sunlight. Keep away from heat and flame. Keep away from
oxidizing agents.
Reactive or incompatible with the following materials: metals, acids and alkalis.
Incompatible with alkali metals. Incompatible with some alkalis. Incompatible with some
strong acids. Incompatible with copper alloys, brass.
Section 11. Toxicological information
Acute toxicity
styrene LC50 Inhalation Gas. Rat 2770 ppm 4 hours
LC50 Inhalation Vapor Rat 11800 mg/m 4 hours
LD50 Oral Rat 2650 mg/kg -
Product/ingredient name Result Species Dose Exposure
Irritation/Corrosion
Information on toxicological effects
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 7/14
CORROSION ISO RESIN COR75-AA-861HC
Section 11. Toxicological information
Carcinogenicity
Not available.
Conclusion/Summary :
Mutagenicity
Not available.
Teratogenicity
Not available.
Reproductive toxicity
Not available.
styrene Eyes - Mild irritant Human - 50 parts per
million
-
Eyes - Moderate irritantRabbit - 24 hours 100
milligrams
-
Eyes - Severe irritantRabbit - 100
milligrams
-
Skin - Mild irritant Rabbit - 500
milligrams
-
Skin - Moderate irritantRabbit - 100 Percent-
Product/ingredient name Result Score Exposure Observation
Sensitization
Not available.
Species
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
styrene Category 3 Not applicable.Respiratory tract
irritation
Name Category
Name Category
styrene Category 1 Inhalation hearing organs
Aspiration hazard
Route of
exposure
Target organs
Route of
exposure
Target organs
Classification
styrene - 2B Reasonably anticipated to be a human carcinogen.
Product/ingredient name NTPIARCOSHA
Styrene manufacturers have determined that the weight of evidence for the
carcinogenicity of this substance does not meet the criteria for classification.
Styrene is listed by IARC as a possible carcinogen to humans (Group 2B) based on
"limited evidence" in humans, "limited evidence" in animals and "other relevant data".
The United States NTP listed styrene as reasonably anticipated to be a human
carcinogen based on "limited evidence" from studies in humans, "sufficient evidence"
from studies in experimental animals, and supporting data on mechanisms of
carcinogenesis. The significance of these results for humans has not been established
through risk assessment.
A study of long term effects of workers exposed to styrene levels in the range of 25-35 ppm for an 8-hour TWA indicated
a possible mild hearing loss.
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 8/14
CORROSION ISO RESIN COR75-AA-861HC
Section 11. Toxicological information
Not available.
Information on the likely
routes of exposure
Inhalation :Harmful if inhaled. May cause respiratory irritation.
No known significant effects or critical hazards.:Ingestion
Skin contact :Causes skin irritation.
Causes serious eye irritation.:Eye contact
Causes damage to organs through prolonged or repeated exposure.General :
No known significant effects or critical hazards.Carcinogenicity :
No known significant effects or critical hazards.Mutagenicity :
No known significant effects or critical hazards.Teratogenicity :
Developmental effects :No known significant effects or critical hazards.
Fertility effects :No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Inhalation Adverse symptoms may include the following:
respiratory tract irritation
coughing
No specific data.
Adverse symptoms may include the following:
irritation
redness
:
:
:
Eye contact :Adverse symptoms may include the following:
pain or irritation
watering
redness
Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure
Numerical measures of toxicity
Acute toxicity estimates
Name Result
styrene ASPIRATION HAZARD - Category 1
:Not available.
Potential acute health effects
Potential immediate
effects
:Not available.
Short term exposure
Potential delayed effects:Not available.
Potential immediate
effects
:Not available.
Long term exposure
Potential delayed effects:Not available.
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 9/14
CORROSION ISO RESIN COR75-AA-861HC
Section 11. Toxicological information
Oral 5750.1 mg/kg
Inhalation (gases) 6010.5 ppm
Inhalation (vapors) 25.6 mg/l
Route ATE value
Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects :No known significant effects or critical hazards.
Product/ingredient name
styrene 0.35 13.49 low
Product/ingredient name Aquatic half-life Photolysis Biodegradability
styrene - - Readily
Toxicity
styrene Acute EC50 1400 g/l Fresh water Algae - Pseudokirchneriella
subcapitata
72 hours
Acute EC50 720 g/l Fresh water Algae - Pseudokirchneriella
subcapitata
96 hours
Acute EC50 4700 g/l Fresh water Daphnia - Daphnia magna 48 hours
Acute LC50 52 mg/l Marine water Crustaceans - Artemia salina48 hours
Acute LC50 4020 g/l Fresh water Fish - Pimephales promelas 96 hours
Chronic NOEC 63 g/l Fresh water Algae - Pseudokirchneriella
subcapitata
96 hours
Product/ingredient name SpeciesResult Exposure
Persistence and degradability
styrene OECD 70 % - Readily - 28 days - -
Product/ingredient name Test DoseResult Inoculum
Soil/water partition
coefficient (KOC)
:Not available.
Mobility in soil
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
:Disposal methods
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 10/14
CORROSION ISO RESIN COR75-AA-861HC
Section 13. Disposal considerations
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers.
Section 14. Transport information
RESIN
SOLUTION
3
III
RESIN
SOLUTION
3
III
RESIN
SOLUTION
UN1866
3
III
UN1866 UN1866
Reportable quantity 2169.9 lbs / 985.11 kg [236.58 gal / 895.56 L]. Package sizes
shipped in quantities less than the product reportable quantity are not subject to the RQ
(reportable quantity) transportation requirements.
DOT
Classification
IMDGIATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to Annex II of MARPOL and
the IBC Code
No. No.No.
Transport within user s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
:Not available.
:
Product classified as per the following sections of the Transportation of Dangerous
Goods Regulations: 2.18-2.19 (Class 3).
Mexico
Classification
UN1866
RESIN
SOLUTION
3
III
No.
DOT Classification
TDG Classification
:
:
TDG
Classification
UN1866
RESIN
SOLUTION
3
III
No.
Section 15. Regulatory information
U.S. Federal regulations
Clean Water Act (CWA) 307: Naphthenic acids, copper salts
Clean Water Act (CWA) 311: styrene
:
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
:
Clean Air Act Section 602
Class I Substances
:Not listed
Clean Air Act Section 602
Class II Substances
:Not listed
TSCA 8(a) PAIR: 4-tert-butylpyrocatechol; 2-methoxy-1-methylethyl acetate
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
SARA 302/304
Composition/information on ingredients
Listed
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 11/14
CORROSION ISO RESIN COR75-AA-861HC
Section 15. Regulatory information
The following components are listed: STYRENE; PHENYLETHYLENEMassachusetts :
SARA 313
Product name CAS number %
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Styrene
Form R - Reporting
requirements
Supplier notification
California Prop. 65
New York :The following components are listed: Styrene
New Jersey :The following components are listed: STYRENE MONOMER; BENZENE, ETHENYL-
Pennsylvania :The following components are listed: BENZENE, ETHENYL-
State regulations
SARA 304 RQ :Not applicable.
No products were found.
Inventory list
Australia :All components are listed or exempted.
Canada :All components are listed or exempted.
China :All components are listed or exempted.
Europe :Not determined.
Japan :Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Republic of Korea :All components are listed or exempted.
Malaysia :Not determined.
New Zealand :All components are listed or exempted.
Philippines :Not determined.
Taiwan :All components are listed or exempted.
Turkey :Not determined.
United States :All components are listed or exempted.
Thailand :Not determined.
Viet Nam :Not determined.
SARA 311/312
Classification :FLAMMABLE LIQUIDS - Category 3
ACUTE TOXICITY (inhalation) - Category 4
SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) - Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) -
Category 1
:The following components are listed. For more information go to www.P65Warnings.ca.gov.
styrene 100-42-5 <= 47.0
styrene 100-42-5 46.09
Any concentration shown as exact is based on formula.
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 12/14
CORROSION ISO RESIN COR75-AA-861HC
Section 16. Other information
12/4/2018
History
Date of printing
Date of issue/Date of
revision
Version
Prepared by
Date of previous issue
:
:
:
:
:
12/4/2018
9/4/2018
1.01
Hazardous Material Information System (U.S.A.)
2
3
1
1
3
2
*
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS
ratings are to be used with a fully implemented HMIS program. HMIS is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS
Personal Protective Equipment (PPE) codes, consult the HMIS Implementation Manual.
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright 1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright 2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to
be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in
NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA
or not, anyone using the 704 systems to classify chemicals does so at their own risk.
Procedure used to derive the classification
Classification Justification
FLAMMABLE LIQUIDS - Category 3 On basis of test data
ACUTE TOXICITY (inhalation) - Category 4 Calculation method
SKIN IRRITATION - Category 2 Calculation method
EYE IRRITATION - Category 2A Calculation method
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) - Category 3
Calculation method
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) -
Category 1
Calculation method
Health, Safety and Environmental Department
For questions about the
SDS, contact
:iasafety@ip-corporation.com
New form 08-2018
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 13/14
CORROSION ISO RESIN COR75-AA-861HC
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Notice to reader
Indicates information that has changed from previously issued version.
References :
Key to abbreviations :ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
29 CFR 1910.1200 Hazard Communication Standard, March 2012
CCR Title 27 Division 4 Office of Environmental Health Hazard Assessment (California
Prop. 65)
American Composites Manufacturers Association
Styrene Information and Research Center
Date of issue/Date of revision :12/4/2018 Date of previous issue :9/4/2018 Version:1.01 14/14
by | Sep 27, 2025
DCPD LAMINATING RESIN
Unsaturated Polyester Resin
Liquid.
SAFETY DATA SHEET
GHS product identifier
Other means of identification
Product type
Emergency telephone
number (with hours of
operation)
Section 1. Identification
:
:
:
:
Supplier’s details :INTERPLASTIC CORPORATION
1225 Willow Lake Boulevard
St. Paul, MN 55110-5145
651.481.6860
DCPD LAMINATING RESIN
Relevant identified uses of the substance or mixture and uses advised against
Product code :COR61-AA-332
Industrial applications.
CHEMTREC 24-Hour Emergency Telephone
US and Canada 800.424.9300
Outside US and Canada +1 703.741.5970
Section 2. Hazards identification
FLAMMABLE LIQUIDS – Category 3
ACUTE TOXICITY (inhalation) – Category 4
SKIN IRRITATION – Category 2
EYE IRRITATION – Category 2A
SKIN SENSITIZATION – Category 1
CARCINOGENICITY – Category 2
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) – Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) –
Category 1
Classification of the
substance or mixture
:
Signal word :Danger
Hazard pictograms :
GHS label elements
Percentage of the mixture consisting of ingredient(s) of unknown dermal toxicity: 30.4%
Percentage of the mixture consisting of ingredient(s) of unknown inhalation toxicity: 2%
OSHA/HCS status :This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 1/15
DCPD LAMINATING RESIN COR61-AA-332
Section 2. Hazards identification
Hazard statements :Flammable liquid and vapor.
Harmful if inhaled.
Causes serious eye irritation.
Causes skin irritation.
May cause an allergic skin reaction.
Suspected of causing cancer.
May cause respiratory irritation.
Causes damage to organs through prolonged or repeated exposure. (hearing organs)
Precautionary statements
Prevention :Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Wear protective gloves. Wear eye or face protection.
Wear protective clothing. Keep away from heat, hot surfaces, sparks, open flames and
other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting
and all material-handling equipment. Use only non-sparking tools. Take precautionary
measures against static discharge. Keep container tightly closed. Use only outdoors or
in a well-ventilated area. Do not breathe vapor. Do not eat, drink or smoke when using
this product. Wash hands thoroughly after handling. Contaminated work clothing must
not be allowed out of the workplace.
Response :Get medical attention if you feel unwell. IF exposed or concerned: Get medical
attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER or physician if you feel unwell. IF ON SKIN (or hair): Take off
immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN:
Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin
irritation or rash occurs: Get medical attention. IF IN EYES: Rinse cautiously with
water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing. If eye irritation persists: Get medical attention.
Storage :Store in a well-ventilated place. Keep cool. Store containers in a safe place.
Disposal :Dispose of contents and container in accordance with all local, regional, national and
international regulations. Do not pressurize, cut, weld, braze, solder, drill, grind or
expose containers to heat or sources of ignition.
Hazards not otherwise
classified
:None known.
Section 3. Composition/information on ingredients
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Other means of
identification
:Unsaturated Polyester Resin
Substance/mixture :
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Any concentration shown as exact is based on formula.
VOC content is listed in Section 9.
Environmental composition is shown in Section 15.
styrene <= 29.0 100-42-5
Proprietary Proprietary -
2-hydroxyethyl methacrylate <= 1.0 868-77-9
cobalt bis(2-ethylhexanoate) <= 1.0 136-52-7
Ingredient name % CAS number
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 2/15
DCPD LAMINATING RESIN COR61-AA-332
Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and
keep at rest in a position comfortable for breathing. If material has been swallowed and
the exposed person is conscious, give small quantities of water to drink. Stop if the
exposed person feels sick as vomiting may be dangerous. Do not induce vomiting
unless directed to do so by medical personnel. If vomiting occurs, the head should be
kept low so that vomit does not enter the lungs. Get medical attention. Never give
anything by mouth to an unconscious person. If unconscious, place in recovery position
and get medical attention immediately. Maintain an open airway. Loosen tight clothing
such as a collar, tie, belt or waistband.
Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash
contaminated clothing thoroughly with water before removing it, or wear gloves.
Continue to rinse for at least 10 minutes. Get medical attention. In the event of any
complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean
shoes thoroughly before reuse.
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Get medical attention. If necessary, call a poison center or physician. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Section 4. First aid measures
Eye contact
Skin contact
Inhalation
Ingestion :
:
:
:
Notes to physician :Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Description of necessary first aid measures
Specific treatments :No specific treatment.
Most important symptoms/effects, acute and delayed
Inhalation :Harmful if inhaled. May cause respiratory irritation.
No known significant effects or critical hazards.:Ingestion
Skin contact :Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye irritation.:Eye contact
Over-exposure signs/symptoms
Skin contact
Ingestion
Inhalation Adverse symptoms may include the following:
respiratory tract irritation
coughing
No specific data.
Adverse symptoms may include the following:
irritation
redness
:
:
:
Eye contact :Adverse symptoms may include the following:
pain or irritation
watering
redness
Potential acute health effects
Indication of immediate medical attention and special treatment needed, if necessary
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention. Buffered baby shampoo will aid in removal of resin.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 3/15
DCPD LAMINATING RESIN COR61-AA-332
Section 4. First aid measures
Protection of first-aiders:No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water
before removing it, or wear gloves.
See toxicological information (Section 11)
Section 5. Fire-fighting measures
Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
Hazardous thermal
decomposition products
Specific hazards arising
from the chemical
Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
Flammable liquid and vapor. Runoff to sewer may create fire or explosion hazard. In a
fire or if heated, a pressure increase will occur and the container may burst, with the risk
of a subsequent explosion. The vapor/gas is heavier than air and will spread along the
ground. Vapors may accumulate in low or confined areas or travel a considerable
distance to a source of ignition and flash back.
Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special protective
equipment for fire-fighters
Use dry chemical, CO , water spray (fog) or foam.
Extinguishing media
:
:
:
Do not use water jet.
Suitable extinguishing
media
:
Unsuitable extinguishing
media
:
Special protective actions
for fire-fighters
:
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
:
:No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Shut off all ignition sources.
No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Small spill :
Methods and materials for containment and cleaning up
For non-emergency
personnel
For emergency responders:If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".
Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Absorb with an inert material and transfer the spilled material and absorbent to an
appropriate waste disposal container. Wear appropriate respirator when ventilation is
inadequate. Wear eye/face protection.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 4/15
DCPD LAMINATING RESIN COR61-AA-332
Section 6. Accidental release measures
Large spill :Stop leak if without risk. Move containers from spill area. Use spark-proof tools and
explosion-proof equipment. Approach release from upwind. Prevent entry into sewers,
water courses, basements or confined areas. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and
place in container for disposal according to local regulations (see Section 13). Dispose
of via a licensed waste disposal contractor. Contaminated absorbent material may pose
the same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal. Wear appropriate respiratory protection.
Wear protective clothing and eye or face protection:
Section 7. Handling and storage
Advice on general
occupational hygiene
Conditions for safe storage,
including any
incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is
handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.
Do not store above the following temperature: 38 C (100.4 F). Store in accordance with
local regulations. Store in a segregated and approved area. Store in original container
protected from direct sunlight in a dry, cool and well-ventilated area, away from
incompatible materials (see Section 10) and food and drink. Eliminate all ignition
sources. Separate from oxidizing materials. Keep container tightly closed and sealed
until ready for use. Containers that have been opened must be carefully resealed and
kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. See Section 10 for incompatible
materials before handling or use. Store containers in a safe place.
:
:
Protective measures Put on appropriate personal protective equipment (see Section 8). Persons with a
history of skin sensitization problems should not be employed in any process in which
this product is used. Avoid exposure - obtain special instructions before use. Do not
handle until all safety precautions have been read and understood. Do not get in eyes
or on skin or clothing. Do not breathe vapor or mist. Do not ingest. Use only with
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Do
not enter storage areas and confined spaces unless adequately ventilated. Keep in the
original container or an approved alternative made from a compatible material, kept
tightly closed when not in use. Store and use away from heat, sparks, open flame or
any other ignition source. Use explosion-proof electrical (ventilating, lighting and
material handling) equipment. Use only non-sparking tools. Take precautionary
measures against electrostatic discharges. Empty containers retain product residue
and can be hazardous. Do not reuse container.
:
Precautions for safe handling
styrene ACGIH TLV (United States, 3/2017).
TWA: 20 ppm 8 hours.
TWA: 85 mg/m 8 hours.
STEL: 40 ppm 15 minutes.
STEL: 170 mg/m 15 minutes.
OSHA PEL 1989 (United States, 3/1989).
TWA: 50 ppm 8 hours.
TWA: 215 mg/m 8 hours.
STEL: 100 ppm 15 minutes.
STEL: 425 mg/m 15 minutes.
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Control parameters
Occupational exposure limits
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 5/15
DCPD LAMINATING RESIN COR61-AA-332
Section 8. Exposure controls/personal protection
OSHA PEL Z2 (United States, 2/2013).
TWA: 100 ppm 8 hours.
CEIL: 200 ppm
AMP: 600 ppm 5 minutes.
NIOSH REL (United States, 10/2016).
TWA: 50 ppm 10 hours.
TWA: 215 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
STEL: 425 mg/m 15 minutes.
Proprietary ACGIH TLV (United States, 3/2017).
TWA: 10 ppm 8 hours.
OSHA PEL 1989 (United States, 3/1989).
TWA: 50 ppm 8 hours.
TWA: 240 mg/m 8 hours.
STEL: 100 ppm 15 minutes.
STEL: 485 mg/m 15 minutes.
NIOSH REL (United States, 10/2016).
TWA: 50 ppm 10 hours.
TWA: 240 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
STEL: 485 mg/m 15 minutes.
OSHA PEL (United States, 6/2016).
CEIL: 100 ppm
CEIL: 480 mg/m
2-hydroxyethyl methacrylate None.
cobalt bis(2-ethylhexanoate) ACGIH TLV (United States, 3/2017).
TWA: 0.02 mg/m , (as Co) 8 hours.
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles.
Eye/face protection :
Environmental exposure
controls
:Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Contaminated work clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures :
Individual protection measures
Skin protection
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 6/15
DCPD LAMINATING RESIN COR61-AA-332
Section 8. Exposure controls/personal protection
Hand protection
Based on the hazard and potential for exposure, select a respirator that meets the
appropriate standard or certification. Respirators must be used according to a
respiratory protection program to ensure proper fitting, training, and other important
aspects of use.
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Respiratory protection :
:
Body protection Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product. When there is a risk of ignition from static electricity, wear anti-
static protective clothing. For the greatest protection from static discharges, clothing
should include anti-static overalls, boots and gloves.
:
Other skin protection :Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Solubility
Liquid.
Not available.
0.9 to 1.3
3.6 [Air = 1]
0.2 to 0.67 kPa (1.5 to 5 mm Hg) [room temperature]
Not available.
Aromatic. Sweetish.Odor
pH
VariousColor
Evaporation rate <1 (butyl acetate = 1)
Auto-ignition temperature
Flash point
Not available.
Closed cup: >31 C (>87.8 F)
Not available.
Not applicable.
Viscosity Not available.
0.1 ppmOdor threshold
Partition coefficient: n-
octanol/water
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Appearance
Boiling point :145 to 168 C (293 to 334.4 F)
Lower and upper explosive
(flammable) limits
:Lower: 0.9%
Upper: 6.8%
Solubility in water :Not applicable.
VOC content :30.8 % (w/w) As shipped, including monomers and additives.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 7/15
DCPD LAMINATING RESIN COR61-AA-332
Section 10. Stability and reactivity
Hazardous decomposition
products
Conditions to avoid Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
allow vapor to accumulate in low or confined areas.
Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
The product is stable.Chemical stability
Reactive or incompatible with the following materials:
oxidizing materials
:
:
:
Incompatible materials :
Possibility of hazardous
reactions
:Hazardous reactions or instability may occur under certain conditions of storage or use.
Reactivity :No specific test data related to reactivity available for this product or its ingredients.
Hazardous polymerization may occur under certain conditions of storage or use. Keep
away from heat and direct sunlight. Keep away from heat and flame. Keep away from
oxidizing agents.
Reactive or incompatible with the following materials: metals, acids and alkalis.
Incompatible with alkali metals. Incompatible with some alkalis. Incompatible with some
strong acids. Incompatible with copper alloys., brass.
Section 11. Toxicological information
Acute toxicity
styrene LC50 Inhalation Gas. Rat 2770 ppm 4 hours
LC50 Inhalation Vapor Rat 11800 mg/m 4 hours
LD50 Oral Rat 2650 mg/kg –
Proprietary LD50 Oral Rat 4900 mg/kg –
2-hydroxyethyl methacrylateLD50 Oral Rat 5050 mg/kg –
cobalt bis(2-ethylhexanoate)LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 1.22 g/kg –
Product/ingredient name Result Species Dose Exposure
Mutagenicity
Irritation/Corrosion
styrene Eyes – Mild irritant Human – 50 parts per
million
–
Eyes – Moderate irritantRabbit – 24 hours 100
milligrams
–
Eyes – Severe irritantRabbit – 100
milligrams
–
Skin – Mild irritant Rabbit – 500
milligrams
–
Skin – Moderate irritantRabbit – 100 Percent-
Proprietary Eyes – Mild irritant Rabbit – 91 milligrams-
Skin – Moderate irritantRabbit – 100 Percent-
Product/ingredient name Result Score Exposure Observation
Sensitization
Not available.
Species
Information on toxicological effects
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 8/15
DCPD LAMINATING RESIN COR61-AA-332
Section 11. Toxicological information
Carcinogenicity
Not available.
Conclusion/Summary :
Not available.
Teratogenicity
Not available.
Reproductive toxicity
Not available.
Information on the likely
routes of exposure
Inhalation :Harmful if inhaled. May cause respiratory irritation.
No known significant effects or critical hazards.:Ingestion
Skin contact :Causes skin irritation. May cause an allergic skin reaction.
Causes serious eye irritation.:Eye contact
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
styrene Category 3 Not applicable.Respiratory tract
irritation
Proprietary Category 3 Not applicable.Narcotic effects
Name Category
Name Category
styrene Category 1 Inhalation hearing organs
Aspiration hazard
Name Result
styrene ASPIRATION HAZARD – Category 1
Route of
exposure
Target organs
Route of
exposure
Target organs
:Not available.
Potential acute health effects
Classification
styrene – 2B Reasonably anticipated to be a human carcinogen.
Proprietary – 2B –
cobalt bis(2-ethylhexanoate)- 2B Reasonably anticipated to be a human carcinogen.
Product/ingredient name NTPIARCOSHA
Styrene manufacturers have determined that the weight of evidence for the
carcinogenicity of this substance does not meet the criteria for classification.
Styrene is listed by IARC as a possible carcinogen to humans (Group 2B) based on
“limited evidence” in humans, “limited evidence” in animals and “other relevant data”.
The United States NTP listed styrene as reasonably anticipated to be a human
carcinogen based on “limited evidence” from studies in humans, “sufficient evidence”
from studies in experimental animals, and supporting data on mechanisms of
carcinogenesis. The significance of these results for humans has not been established
through risk assessment.
A study of long term effects of workers exposed to styrene levels in the range of 25-35 ppm for an 8-hour TWA indicated
a possible mild hearing loss.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 9/15
DCPD LAMINATING RESIN COR61-AA-332
Section 11. Toxicological information
Not available.
Causes damage to organs through prolonged or repeated exposure. Once sensitized, a
severe allergic reaction may occur when subsequently exposed to very low levels.
General :
Suspected of causing cancer. Risk of cancer depends on duration and level of
exposure.
Carcinogenicity :
No known significant effects or critical hazards.Mutagenicity :
No known significant effects or critical hazards.Teratogenicity :
Developmental effects :No known significant effects or critical hazards.
Fertility effects :No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Inhalation Adverse symptoms may include the following:
respiratory tract irritation
coughing
No specific data.
Adverse symptoms may include the following:
irritation
redness
:
:
:
Eye contact :Adverse symptoms may include the following:
pain or irritation
watering
redness
Potential chronic health effects
Delayed and immediate effects and also chronic effects from short and long term exposure
Numerical measures of toxicity
Oral 8975.8 mg/kg
Inhalation (gases) 9739 ppm
Inhalation (vapors) 41.49 mg/l
Route ATE value
Acute toxicity estimates
Potential immediate
effects
:Not available.
Short term exposure
Potential delayed effects:Not available.
Potential immediate
effects
:Not available.
Long term exposure
Potential delayed effects:Not available.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 10/15
DCPD LAMINATING RESIN COR61-AA-332
Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects :No known significant effects or critical hazards.
Product/ingredient name
styrene 0.35 13.49 low
Proprietary 3.48 15 to 140 low
2-hydroxyethyl methacrylate0.42 – low
cobalt bis(2-ethylhexanoate)- 15600 high
Product/ingredient name Aquatic half-life Photolysis Biodegradability
styrene – – Readily
Toxicity
styrene Acute EC50 1400 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
72 hours
Acute EC50 720 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
Acute EC50 4700 g/l Fresh water Daphnia – Daphnia magna 48 hours
Acute LC50 52 mg/l Marine water Crustaceans – Artemia salina48 hours
Acute LC50 4020 g/l Fresh water Fish – Pimephales promelas 96 hours
Chronic NOEC 63 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
2-hydroxyethyl methacrylateAcute LC50 227000 g/l Fresh waterFish – Pimephales promelas –
Juvenile (Fledgling, Hatchling,
Weanling)
96 hours
Product/ingredient name SpeciesResult Exposure
Persistence and degradability
styrene OECD 70 % – Readily – 28 days – –
Product/ingredient name Test DoseResult Inoculum
Soil/water partition
coefficient (KOC)
:Not available.
Mobility in soil
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Vapor from product residues may create a highly flammable or explosive atmosphere
inside the container. Do not cut, weld or grind used containers unless they have been
cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact
with soil, waterways, drains and sewers.
:Disposal methods
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 11/15
DCPD LAMINATING RESIN COR61-AA-332
Section 14. Transport information
RESIN
SOLUTION
3
III
RESIN
SOLUTION
3
III
RESIN
SOLUTION
UN1866
3
III
UN1866 UN1866
Reportable quantity 3515.9 lbs / 1596.2 kg [383.34 gal / 1451.1 L]. Package sizes
shipped in quantities less than the product reportable quantity are not subject to the RQ
(reportable quantity) transportation requirements.
DOT
Classification
IMDGIATA
UN number
UN proper
shipping name
Transport
hazard class(es)
Packing group
Additional information
Environmental
hazards
Special precautions for user
Transport in bulk according
to Annex II of MARPOL and
the IBC Code
No. No.No.
Transport within user s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
:Not available.
:
Product classified as per the following sections of the Transportation of Dangerous
Goods Regulations: 2.18-2.19 (Class 3).
Mexico
Classification
UN1866
RESIN
SOLUTION
3
III
No.
DOT Classification
TDG Classification
:
:
TDG
Classification
UN1866
RESIN
SOLUTION
3
III
No.
Section 15. Regulatory information
U.S. Federal regulations
Clean Water Act (CWA) 307: Naphthenic acids, copper salts; ethylbenzene
Clean Water Act (CWA) 311: styrene; ethylbenzene; xylene; maleic anhydride
:
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
:
Clean Air Act Section 602
Class I Substances
:Not listed
Clean Air Act Section 602
Class II Substances
:Not listed
TSCA 8(a) PAIR: 4-tert-butylpyrocatechol; cinnamaldehyde; bornan-2-one; Poly(oxy-1,2-
ethanediyl), -[4-(1,1,3,3-tetramethylbutyl)phenyl]- -hydroxy-; triethyl phosphate
TSCA 8(a) CDR Exempt/Partial exemption: Not determined
TSCA 8(c) calls for record of SAR: triethyl phosphate
Styrene
Quinone
Cobalt Compounds
Cobalt Compounds
Cobalt Compounds
Ethyl benzene
Xylenes
Maleic anhydride
Hydroquinone
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 12/15
DCPD LAMINATING RESIN COR61-AA-332
Section 15. Regulatory information
The following components are listed: STYRENE; PHENYLETHYLENE; ProprietaryMassachusetts :
SARA 313
Product name CAS number %
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Styrene
-Methyl styrene
Ethylbenzene
Form R – Reporting
requirements
Supplier notification
California Prop. 65
New York :The following components are listed: Styrene
New Jersey :The following components are listed: STYRENE MONOMER; BENZENE, ETHENYL-;
COBALT compounds; Proprietary
Pennsylvania :The following components are listed: BENZENE, ETHENYL-; COBALT COMPOUNDS
State regulations
SARA 302/304
SARA 304 RQ :12487512.5 lbs / 5669330.7 kg [1361526.1 gal / 5153937 L]
1,4-dihydroxybenzene <0.1 Yes.500 / 10000- 100 -
Composition/information on ingredients
Name % EHS(lbs) (lbs)(gallons) (gallons)
SARA 302 TPQ SARA 304 RQ
Inventory list
Australia :Not determined.
Canada :All components are listed or exempted.
China :All components are listed or exempted.
Europe :Not determined.
Japan :Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Malaysia :Not determined.
New Zealand :All components are listed or exempted.
Philippines :Not determined.
SARA 311/312
Classification :FLAMMABLE LIQUIDS - Category 3
ACUTE TOXICITY (inhalation) - Category 4
SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
SKIN SENSITIZATION - Category 1
CARCINOGENICITY - Category 2
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) - Category 3
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) -
Category 1
:The following components are listed. For more information go to www.P65Warnings.ca.gov.
styrene 100-42-5 <= 29.0
cobalt bis(2-ethylhexanoate) 136-52-7 <= 1.0
styrene 100-42-5 28.44
cobalt bis(2-ethylhexanoate) 136-52-7 0.12
Any concentration shown as exact is based on formula.
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 13/15
DCPD LAMINATING RESIN COR61-AA-332
Section 15. Regulatory information
Republic of Korea :All components are listed or exempted.
Taiwan :All components are listed or exempted.
Turkey :Not determined.
United States :All components are listed or exempted.
Thailand :Not determined.
Viet Nam :Not determined.
Section 16. Other information
8/31/2018
History
Date of printing :
Hazardous Material Information System (U.S.A.)
2
3
1
1
3
2
*
National Fire Protection Association (U.S.A.)
Health
Special
Instability/Reactivity
Flammability
Health
Flammability
Physical hazards
Caution: HMIS ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks. Although HMIS ratings and the associated label are not required on
SDSs or products leaving a facility under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS
ratings are to be used with a fully implemented HMIS program. HMIS is a registered trademark and service
mark of the American Coatings Association, Inc.
The customer is responsible for determining the PPE code for this material. For more information on HMIS
Personal Protective Equipment (PPE) codes, consult the HMIS Implementation Manual.
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright 1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright 2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to
be interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in
NFPA 49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA
or not, anyone using the 704 systems to classify chemicals does so at their own risk.
Procedure used to derive the classification
Classification Justification
FLAMMABLE LIQUIDS - Category 3 On basis of test data
ACUTE TOXICITY (inhalation) - Category 4 Calculation method
SKIN IRRITATION - Category 2 Calculation method
EYE IRRITATION - Category 2A Calculation method
SKIN SENSITIZATION - Category 1 Calculation method
CARCINOGENICITY - Category 2 Calculation method
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Respiratory tract
irritation) - Category 3
Calculation method
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) (hearing organs) -
Category 1
Calculation method
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 14/15
DCPD LAMINATING RESIN COR61-AA-332
Section 16. Other information
Date of issue/Date of
revision
Version
Prepared by
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Notice to reader
Date of previous issue
:
:
:
:
Indicates information that has changed from previously issued version.
References :
Key to abbreviations :ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
8/31/2018
No previous validation
1
Health, Safety and Environmental Department
For questions about the
SDS, contact
:iasafety@ip-corporation.com
29 CFR 1910.1200 Hazard Communication Standard, March 2012
CCR Title 27 Division 4 Office of Environmental Health Hazard Assessment (California
Prop. 65)
American Composites Manufacturers Association
Styrene Information and Research Center
New form 08-2018
Date of issue/Date of revision :8/31/2018 Date of previous issue :No previous validationVersion:1 15/15
by | Sep 27, 2025
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixtures
Trade name : STYROSAFE LAMINATING RESIN
CAS-No. : mixture
Product code : 30P-106A
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : LAMINATING RESIN FOR EPS
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vapor
Acute toxicity (inhalation)
Category 4
H332 Harmful if inhaled
Skin corrosion/irritation
Category 2
H315 Causes skin irritation
Serious eye damage/eye
irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category
1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2 H351 Suspected of causing cancer
Reproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn child
Specific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritation
Specific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic life
Full text of H statements : see section 16
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 2/11
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H402 – Harmful to aquatic life
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 3/11
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin
(CAS-No.) TRADE SECRET <= 72 Not classified
2-hydroxyethyl methacrylate, stabilized
(CAS-No.) 868-77-9 <= 22 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
styrene, inhibited
(CAS-No.) 100-42-5 <= 11 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.5 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible). IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor/physician if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh
air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Call a
poison center/doctor/physician if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below. Flammable liquid
and vapor.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 4/11
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so.
Take precautionary measures against static discharge. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Ground/bond container and
receiving equipment. Flammable vapors may accumulate in the container. Use explosion-proof
equipment. Wear personal protective equipment. Do not breathe
dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool. Store locked up.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 5/11
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIH ACGIH STEL (ppm) 40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Not applicable
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. Wear respiratory
protection
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 64 C
Flash point : < 30 - 34 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : 1.1
Solubility : No data available
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 6/11
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapor.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Inhalation: Harmful if inhaled.
STYROSAFE LAMINATING RESIN (mixture)
ATE US (gases) 4500.000 ppmV/4h
ATE US (vapors) 11.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000.000 mg/kg body weight
ATE US (dermal) 2820.000 mg/kg body weight
ATE US (gases) 2770.000 ppmV/4h
ATE US (vapors) 12.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129.000 mg/kg body weight
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 7/11
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LD50 oral rat 5564 mg/kg body weight (Rat; Experimental value)
LD50 dermal rabbit > 5000 mg/kg (Rabbit; Experimental value)
ATE US (oral) 5564.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status 3 – Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure : May cause respiratory irritation.
Specific target organ toxicity repeated
exposure
: Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Harmful to aquatic life.
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LC50 fish 1 227 mg/l (LC50; 96 h)
EC50 Daphnia 1 171 mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
EC50 Daphnia 2 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
Threshold limit algae 1 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 8/11
12.2. Persistence and degradability
STYROSAFE LAMINATING RESIN (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the
soil.
12.3. Bioaccumulative potential
STYROSAFE LAMINATING RESIN (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (BCF)
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
BCF fish 1 1.3 - 1.5 (BCF)
Log Pow -0.55 - 0.49
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
Log Koc Koc,352; Estimated value; log Koc; 2.55; Estimated value
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Effect on the global warming : No known effects from this product.
GWPmix comment : No known effects from this product.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 9/11
Additional information : Handle empty containers with care because residual vapors are flammable. Flammable vapors
may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) : RESIN SOLUTION
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
Hazard labels (DOT) : 3 - Flammable liquid
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 10/11
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
Yes No No No 0.1 g/day
styrene, inhibited (100-42-5)
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information : None.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 11/11
Full text of H-phrases:
---
---
H226 Flammable liquid and vapor
---
---
H315 Causes skin irritation
---
---
H317 May cause an allergic skin reaction
---
---
H319 Causes serious eye irritation
---
---
H332 Harmful if inhaled
---
---
H335 May cause respiratory irritation
---
---
H351 Suspected of causing cancer
---
---
H361 Suspected of damaging fertility or the unborn child
---
---
H372 Causes damage to organs through prolonged or repeated exposure
---
---
H400 Very toxic to aquatic life
---
---
H402 Harmful to aquatic life
---
---
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixtures
Trade name : STYROSAFE LAMINATING RESIN
CAS-No. : mixture
Product code : 30P-106A
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : LAMINATING RESIN FOR EPS
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vapor
Acute toxicity (inhalation)
Category 4
H332 Harmful if inhaled
Skin corrosion/irritation
Category 2
H315 Causes skin irritation
Serious eye damage/eye
irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category
1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2 H351 Suspected of causing cancer
Reproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn child
Specific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritation
Specific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic life
Full text of H statements : see section 16
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 2/11
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H402 – Harmful to aquatic life
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 3/11
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin
(CAS-No.) TRADE SECRET <= 72 Not classified
2-hydroxyethyl methacrylate, stabilized
(CAS-No.) 868-77-9 <= 22 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
styrene, inhibited
(CAS-No.) 100-42-5 <= 11 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.5 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible). IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor/physician if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh
air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Call a
poison center/doctor/physician if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below. Flammable liquid
and vapor.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 4/11
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so.
Take precautionary measures against static discharge. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Ground/bond container and
receiving equipment. Flammable vapors may accumulate in the container. Use explosion-proof
equipment. Wear personal protective equipment. Do not breathe
dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool. Store locked up.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 5/11
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIH ACGIH STEL (ppm) 40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Not applicable
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. Wear respiratory
protection
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 64 C
Flash point : < 30 - 34 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : 1.1
Solubility : No data available
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 6/11
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapor.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Inhalation: Harmful if inhaled.
STYROSAFE LAMINATING RESIN (mixture)
ATE US (gases) 4500.000 ppmV/4h
ATE US (vapors) 11.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000.000 mg/kg body weight
ATE US (dermal) 2820.000 mg/kg body weight
ATE US (gases) 2770.000 ppmV/4h
ATE US (vapors) 12.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129.000 mg/kg body weight
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 7/11
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LD50 oral rat 5564 mg/kg body weight (Rat; Experimental value)
LD50 dermal rabbit > 5000 mg/kg (Rabbit; Experimental value)
ATE US (oral) 5564.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status 3 – Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure : May cause respiratory irritation.
Specific target organ toxicity repeated
exposure
: Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Harmful to aquatic life.
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LC50 fish 1 227 mg/l (LC50; 96 h)
EC50 Daphnia 1 171 mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
EC50 Daphnia 2 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
Threshold limit algae 1 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 8/11
12.2. Persistence and degradability
STYROSAFE LAMINATING RESIN (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the
soil.
12.3. Bioaccumulative potential
STYROSAFE LAMINATING RESIN (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (BCF)
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
BCF fish 1 1.3 - 1.5 (BCF)
Log Pow -0.55 - 0.49
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
Log Koc Koc,352; Estimated value; log Koc; 2.55; Estimated value
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Effect on the global warming : No known effects from this product.
GWPmix comment : No known effects from this product.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 9/11
Additional information : Handle empty containers with care because residual vapors are flammable. Flammable vapors
may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) : RESIN SOLUTION
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
Hazard labels (DOT) : 3 - Flammable liquid
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 10/11
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
Yes No No No 0.1 g/day
styrene, inhibited (100-42-5)
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information : None.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 11/11
Full text of H-phrases:
---
---
H226 Flammable liquid and vapor
---
---
H315 Causes skin irritation
---
---
H317 May cause an allergic skin reaction
---
---
H319 Causes serious eye irritation
---
---
H332 Harmful if inhaled
---
---
H335 May cause respiratory irritation
---
---
H351 Suspected of causing cancer
---
---
H361 Suspected of damaging fertility or the unborn child
---
---
H372 Causes damage to organs through prolonged or repeated exposure
---
---
H400 Very toxic to aquatic life
---
---
H402 Harmful to aquatic life
---
---
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixtures
Trade name : STYROSAFE LAMINATING RESIN
CAS-No. : mixture
Product code : 30P-106A
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : LAMINATING RESIN FOR EPS
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vapor
Acute toxicity (inhalation)
Category 4
H332 Harmful if inhaled
Skin corrosion/irritation
Category 2
H315 Causes skin irritation
Serious eye damage/eye
irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category
1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2 H351 Suspected of causing cancer
Reproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn child
Specific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritation
Specific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic life
Full text of H statements : see section 16
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 2/11
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H402 – Harmful to aquatic life
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 3/11
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin
(CAS-No.) TRADE SECRET <= 72 Not classified
2-hydroxyethyl methacrylate, stabilized
(CAS-No.) 868-77-9 <= 22 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
styrene, inhibited
(CAS-No.) 100-42-5 <= 11 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.5 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible). IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor/physician if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh
air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Call a
poison center/doctor/physician if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below. Flammable liquid
and vapor.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 4/11
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so.
Take precautionary measures against static discharge. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Ground/bond container and
receiving equipment. Flammable vapors may accumulate in the container. Use explosion-proof
equipment. Wear personal protective equipment. Do not breathe
dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool. Store locked up.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 5/11
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIH ACGIH STEL (ppm) 40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Not applicable
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. Wear respiratory
protection
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 64 C
Flash point : < 30 - 34 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : 1.1
Solubility : No data available
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 6/11
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapor.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Inhalation: Harmful if inhaled.
STYROSAFE LAMINATING RESIN (mixture)
ATE US (gases) 4500.000 ppmV/4h
ATE US (vapors) 11.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000.000 mg/kg body weight
ATE US (dermal) 2820.000 mg/kg body weight
ATE US (gases) 2770.000 ppmV/4h
ATE US (vapors) 12.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129.000 mg/kg body weight
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 7/11
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LD50 oral rat 5564 mg/kg body weight (Rat; Experimental value)
LD50 dermal rabbit > 5000 mg/kg (Rabbit; Experimental value)
ATE US (oral) 5564.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status 3 – Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure : May cause respiratory irritation.
Specific target organ toxicity repeated
exposure
: Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Harmful to aquatic life.
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LC50 fish 1 227 mg/l (LC50; 96 h)
EC50 Daphnia 1 171 mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
EC50 Daphnia 2 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
Threshold limit algae 1 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 8/11
12.2. Persistence and degradability
STYROSAFE LAMINATING RESIN (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the
soil.
12.3. Bioaccumulative potential
STYROSAFE LAMINATING RESIN (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (BCF)
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
BCF fish 1 1.3 - 1.5 (BCF)
Log Pow -0.55 - 0.49
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
Log Koc Koc,352; Estimated value; log Koc; 2.55; Estimated value
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Effect on the global warming : No known effects from this product.
GWPmix comment : No known effects from this product.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 9/11
Additional information : Handle empty containers with care because residual vapors are flammable. Flammable vapors
may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) : RESIN SOLUTION
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
Hazard labels (DOT) : 3 - Flammable liquid
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 10/11
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
Yes No No No 0.1 g/day
styrene, inhibited (100-42-5)
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information : None.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 11/11
Full text of H-phrases:
---
---
H226 Flammable liquid and vapor
---
---
H315 Causes skin irritation
---
---
H317 May cause an allergic skin reaction
---
---
H319 Causes serious eye irritation
---
---
H332 Harmful if inhaled
---
---
H335 May cause respiratory irritation
---
---
H351 Suspected of causing cancer
---
---
H361 Suspected of damaging fertility or the unborn child
---
---
H372 Causes damage to organs through prolonged or repeated exposure
---
---
H400 Very toxic to aquatic life
---
---
H402 Harmful to aquatic life
---
---
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) Page 1
SECTION 1: Identification
1.1. Identification
Product form : Mixtures
Trade name : STYROSAFE LAMINATING RESIN
CAS-No. : mixture
Product code : 30P-106A
Formula : na
1.2. Recommended use and restrictions on use
Use of the substance/mixture : LAMINATING RESIN FOR EPS
1.3. Supplier
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazard(s) identification
2.1. Classification of the substance or mixture
GHS-US classification
Flammable liquids
Category 3
H226 Flammable liquid and vapor
Acute toxicity (inhalation)
Category 4
H332 Harmful if inhaled
Skin corrosion/irritation
Category 2
H315 Causes skin irritation
Serious eye damage/eye
irritation Category 2
H319 Causes serious eye irritation
Skin sensitization, Category
1
H317 May cause an allergic skin reaction
Carcinogenicity Category 2 H351 Suspected of causing cancer
Reproductive toxicity
Category 2
H361 Suspected of damaging fertility or the unborn child
Specific target organ
toxicity (single exposure)
Category 3
H335 May cause respiratory irritation
Specific target organ
toxicity (repeated exposure)
Category 1
H372 Causes damage to organs through prolonged or repeated exposure
Hazardous to the aquatic
environment – Acute
Hazard Category 3
H402 Harmful to aquatic life
Full text of H statements : see section 16
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 2/11
2.2. GHS Label elements, including precautionary statements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H317 – May cause an allergic skin reaction
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
H402 – Harmful to aquatic life
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/Bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust/fume/gas/mist/vapors/spray
P261 – Avoid breathing dust/fume/gas/mist/vapors/spray
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P272 – Contaminated work clothing must not be allowed out of the workplace
P273 – Avoid release to the environment
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – If on skin: Wash with plenty of water/
P303+P361+P353 – If on skin (or hair): Take off immediately all contaminated clothing. Rinse
skin with water/shower
P304+P340 – If inhaled: Remove person to fresh air and keep comfortable for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – If exposed or concerned: Get medical advice/attention
P312 – Call a poison center/doctor/ if you feel unwell
P314 – Get medical advice/attention if you feel unwell
P321 – Specific treatment (see … on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P333+P313 – If skin irritation or rash occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362+P364 – Take off contaminated clothing and wash it before reuse
P363 – Wash contaminated clothing before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards which do not result in classification
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Not applicable
3.2. Mixtures
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 3/11
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin
(CAS-No.) TRADE SECRET <= 72 Not classified
2-hydroxyethyl methacrylate, stabilized
(CAS-No.) 868-77-9 <= 22 Skin Irrit. 2, H315
Eye Irrit. 2, H319
Skin Sens. 1, H317
styrene, inhibited
(CAS-No.) 100-42-5 <= 11 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation), H332
Acute Tox. 4 (Inhalation:vapour), H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
cobalt(II) 2-ethylhexanoate
(CAS-No.) 136-52-7 <= 0.5 Eye Irrit. 2, H319
Skin Sens. 1, H317
Carc. 2, H351
Aquatic Acute 1, H400
Aquatic Chronic 2, H411
Full text of hazard classes and H-statements : see section 16
SECTION 4: First-aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical
advice (show the label where possible). IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor/physician if you feel unwell.
First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. Allow victim to breathe fresh
air. Allow the victim to rest. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. Call a
poison center/doctor/physician if you feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation
occurs: wash throughly for five minutes. seek medical attention. Get medical advice/attention.
Specific treatment (see seek medical attention. on this label). If skin irritation or rash occurs:
Get medical advice/attention.
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison
center/doctor/physician if you feel unwell.
4.2. Most important symptoms and effects (acute and delayed)
Symptoms/effects : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
4.3. Immediate medical attention and special treatment, if necessary
Treat symptomatically.
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below. Flammable liquid
and vapor.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 4/11
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. Do
not attempt to take action without suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no
smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
6.1.2. For emergency responders
Protective equipment : Do not attempt to take action without suitable protective equipment. Equip cleanup crew with
proper protection. For further information refer to section 8: "Exposure controls/personal
protection".
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Avoid release to the environment. Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released product, pump into suitable containers.
Methods for cleaning up : Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or
diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Notify authorities if product enters sewers or public waters.
Other information : Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection. For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a
well-ventilated area. Obtain special instructions before use. Do not handle until all safety
precautions have been read and understood. Eliminate all ignition sources if safe to do so.
Take precautionary measures against static discharge. Keep away from heat, hot surfaces,
sparks, open flames and other ignition sources. No smoking. Ground/bond container and
receiving equipment. Flammable vapors may accumulate in the container. Use explosion-proof
equipment. Wear personal protective equipment. Do not breathe
dust/fume/gas/mist/vapors/spray. Avoid contact with skin and eyes.
Hygiene measures : Wash HANDS thoroughly after handling. Wash contaminated clothing before reuse.
Contaminated work clothing should not be allowed out of the workplace. Do not eat, drink or
smoke when using this product. Always wash hands after handling the product.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed. Store in a well-
ventilated place. Keep cool. Store locked up.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 5/11
styrene, inhibited (100-42-5)
ACGIH ACGIH TWA (ppm) 20 ppm (Styrene, monomer; USA; Time-weighted
average exposure limit 8 h; TLV - Adopted Value)
ACGIH ACGIH STEL (ppm) 40 ppm (Styrene, monomer; USA; Short time value;
TLV - Adopted Value)
cobalt(II) 2-ethylhexanoate (136-52-7)
Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Not applicable
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Not applicable
8.2. Appropriate engineering controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available). Ensure good
ventilation of the work station.
Environmental exposure controls : Avoid release to the environment.
8.3. Individual protection measures/Personal protective equipment
Personal protective equipment:
Avoid all unnecessary exposure.
Hand protection:
Wear protective gloves
Eye protection:
Chemical goggles or safety glasses. Safety glasses
Skin and body protection:
Wear suitable protective clothing
Respiratory protection:
Wear appropriate mask. Wear respiratory
protection
Other information:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Colourless to yellow
Odor : characteristic
Odor threshold : No data available
pH : No data available
Melting point : Not applicable
Freezing point : No data available
Boiling point : 64 C
Flash point : < 30 - 34 C
Relative evaporation rate (butyl acetate=1) : No data available
Flammability (solid, gas) : Highly flammable liquid and vapor. Flammable liquid and vapor.
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : 1.1
Solubility : No data available
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 6/11
Log Pow : No data available
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosion limits : No data available
Explosive properties : No data available
Oxidizing properties : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below. Flammable liquid and vapor.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks.
Eliminate all sources of ignition.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Inhalation: Harmful if inhaled.
STYROSAFE LAMINATING RESIN (mixture)
ATE US (gases) 4500.000 ppmV/4h
ATE US (vapors) 11.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE US (oral) 5000.000 mg/kg body weight
ATE US (dermal) 2820.000 mg/kg body weight
ATE US (gases) 2770.000 ppmV/4h
ATE US (vapors) 12.000 mg/l/4h
ATE US (dust, mist) 1.500 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE US (oral) 3129.000 mg/kg body weight
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 7/11
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LD50 oral rat 5564 mg/kg body weight (Rat; Experimental value)
LD50 dermal rabbit > 5000 mg/kg (Rabbit; Experimental value)
ATE US (oral) 5564.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : May cause an allergic skin reaction.
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
National Toxicology Program (NTP) Status 3 – Reasonably anticipated to be Human Carcinogen
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity single exposure : May cause respiratory irritation.
Specific target organ toxicity repeated
exposure
: Causes damage to organs through prolonged or repeated exposure.
Aspiration hazard : Not classified
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/effects after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled. May cause respiratory irritation.
Symptoms/effects after skin contact : Causes skin irritation. Irritation. May cause an allergic skin reaction.
Symptoms/effects after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
Ecology – general : Harmful to aquatic life.
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 46.51 mg/l (LOEC; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 1 0.212 mg/l (NOEC; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
LC50 fish 2 54.1 mg/l (LC50; ASTM; 96 h; Pimephales promelas; Flow-through system; Fresh water;
Read-across)
EC50 Daphnia 2 0.605 mg/l (LC50; ASTM; 48 h; Ceriodaphnia dubia; Static system; Salt water; Read-across)
Threshold limit algae 1 144 g/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
Threshold limit algae 2 32.2 g/l (NOEC; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Read-across)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
LC50 fish 1 227 mg/l (LC50; 96 h)
EC50 Daphnia 1 171 mg/l (NOEC; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
EC50 Daphnia 2 380 mg/l (EC50; OECD 202: Daphnia sp. Acute Immobilisation Test; 48 h; Daphnia magna;
Static system; Fresh water; Experimental value)
Threshold limit algae 1 836 mg/l (ErC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
Threshold limit algae 2 345 mg/l (EbC50; OECD 201: Alga, Growth Inhibition Test; 72 h; Pseudokirchneriella
subcapitata; Static system; Fresh water; Experimental value)
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 8/11
12.2. Persistence and degradability
STYROSAFE LAMINATING RESIN (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD)
2.8 g O /g substance
ThOD
3.07 g O /g substance
BOD (% of ThOD) 0.42
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Readily biodegradable in water. No (test)data on mobility of the substance available.
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Persistence and degradability Readily biodegradable in water. Biodegradability in soil: no data available. Adsorbs into the
soil.
12.3. Bioaccumulative potential
STYROSAFE LAMINATING RESIN (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (BCF)
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
BCF fish 1 1.2 (BCF; 131 days; Seriola quinqueradiata; Static system; Salt water; Read-across)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
2-hydroxyethyl methacrylate, stabilized (868-77-9)
BCF fish 1 1.3 - 1.5 (BCF)
Log Pow -0.55 - 0.49
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500).
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
Log Koc Koc,352; Estimated value; log Koc; 2.55; Estimated value
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Effect on the global warming : No known effects from this product.
GWPmix comment : No known effects from this product.
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Disposal methods
Waste treatment methods : Dispose of contents/container in accordance with licensed collector s sorting instructions.
Product/Packaging disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 9/11
Additional information : Handle empty containers with care because residual vapors are flammable. Flammable vapors
may accumulate in the container.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Proper Shipping Name (DOT) : RESIN SOLUTION
Class (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT) : III - Minor Danger
Hazard labels (DOT) : 3 - Flammable liquid
Other information : No supplementary information available.
Transportation of Dangerous Goods
Transport by sea
Transport document description (IMDG) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
Transport document description (IATA) : UN 1866 RESIN SOLUTION, 3, III
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Subject to reporting requirements of United States SARA Section 313
CERCLA RQ 1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the United States TSCA (Toxic Substances Control Act) inventory
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the United States TSCA (Toxic Substances Control Act) inventory
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 10/11
15.2. International regulations
CANADA
styrene, inhibited (100-42-5)
Listed on the Canadian DSL (Domestic Substances List)
cobalt(II) 2-ethylhexanoate (136-52-7)
Listed on the Canadian DSL (Domestic Substances List)
Unsaturated Polyester Resin (TRADE SECRET)
Not listed on the Canadian DSL (Domestic Substances List)/NDSL (Non-Domestic Substances List)
2-hydroxyethyl methacrylate, stabilized (868-77-9)
Listed on the Canadian DSL (Domestic Substances List)
EU-Regulations
No additional information available
National regulations
styrene, inhibited (100-42-5)
Listed on IARC (International Agency for Research on Cancer)
Listed as carcinogen on NTP (National Toxicology Program)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Male
No significant risk
level (NSRL)
Yes No No No 0.1 g/day
styrene, inhibited (100-42-5)
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) List
SECTION 16: Other information
Other information : None.
STYROSAFE LAMINATING RESIN
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
05/22/2018 EN (English US) 11/11
Full text of H-phrases:
---
---
H226 Flammable liquid and vapor
---
---
H315 Causes skin irritation
---
---
H317 May cause an allergic skin reaction
---
---
H319 Causes serious eye irritation
---
---
H332 Harmful if inhaled
---
---
H335 May cause respiratory irritation
---
---
H351 Suspected of causing cancer
---
---
H361 Suspected of damaging fertility or the unborn child
---
---
H372 Causes damage to organs through prolonged or repeated exposure
---
---
H400 Very toxic to aquatic life
---
---
H402 Harmful to aquatic life
---
---
H411 Toxic to aquatic life with long lasting effects
NFPA health hazard : 2 - Materials that, under emergency conditions, can cause
temporary incapacitation or residual injury.
NFPA fire hazard : 3 - Liquids and solids (including finely divided suspended
solids) that can be ignited under almost all ambient
temperature conditions.
NFPA reactivity : 2 - Materials that readily undergo violent chemical change
at elevated temperatures and pressures.
Hazard Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard - Materials capable of ignition under almost all normal temperature
conditions. Includes flammable liquids with flash points below 73 F and boiling points above
100 F. as well as liquids with flash points between 73 F and 100 F. (Classes IB & IC)
Physical : 1 Slight Hazard - Materials that are normally stable but can become unstable (self-react) at high
temperatures and pressures. Materials may react non-violently with water or undergo
hazardous polymerization in the absence of inhibitors.
Personal protection : H
H - Splash goggles, Gloves, Synthetic apron, Vapor respirator
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
Vinyl Ester Resin
Product name
Product type
Section 1. Identification
Chemical family Aromatic.
Relevant identified uses of the substance or mixture and uses advised against
SDS No. NA-1504:1132 (Version: 4.1)
Uses advised against
Identified uses Used in the manufacture of thermoset plastic parts.
No additional information.
LPT-68000
SAFETY DATA SHEET
Date of issue: 03/01/2020
Date of previous issue: 05/15/2019
Emergency telephone number
Supplier’s details
CHEMTREC Within USA and Canada
CHEMTREC Outside USA and Canada
CANUTEC Within Canada
+1 (800) 424-9300
+1 (703) 527-3887
+1 (613) 996-6666
CCN1023
AOC
955 Highway 57 East
Collierville, TN 38017
Phone Number: (901) 854-2800
Hours: 8AM-5pm (Central Time) Mon-Fri
AOC
38 Royal Road
Guelph, Ontario Canada N1H 1G3
Phone Number: (519) 821-5180
Hours: 8am-5pm (Eastern) Mon-Fri
E-Mail: aoc.sds@aocresins.com
Website: www.aocresins.com
United States: Canada:
Section 2. Hazards identification
OSHA/HCS status
FLAMMABLE LIQUIDS Category 3 H226
ACUTE TOXICITY (Inhalation) Category 4 H332
SKIN IRRITATION Category 2 H315
EYE IRRITATION Category 2A H319
CARCINOGENICITY Category 2 H351
REPRODUCTIVE TOXICITY Category 2 H361d
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) Category 3 H335
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) Category 1 H372
ASPIRATION HAZARD Category 1 H304
Classification of the substance or mixture
Signal word
Danger
Hazard statements
H226: Flammable liquid and vapor.
H332: Harmful if inhaled.
H319: Causes serious eye irritation.
H315: Causes skin irritation.
H361d: Suspected of damaging the unborn child.
H351: Suspected of causing cancer.
H304: May be fatal if swallowed and enters airways.
H335: May cause respiratory irritation.
H372: Causes damage to organs through prolonged or repeated exposure if inhaled. (hearing organs, kidneys)
Hazard pictograms
Precautionary statements
GHS label elements
General
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Page: 1 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 2. Hazards identification
Prevention
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P210: Keep away from heat, sparks, open flames and hot surfaces. – No smoking.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting/material-handling equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P233: Keep container tightly closed.
P271: Use only outdoors or in a well-ventilated area.
P260: Do not breathe vapor or mist.
P270: Do not eat, drink or smoke when using this product.
P264: Wash hands thoroughly after handling.
Response
P314: Get medical attention if you feel unwell.
P308+P313: IF exposed or concerned: Get medical attention.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312: Call a POISON CENTER or physician if you feel unwell.
P370+P378: In case of fire: Use dry chemical, CO , water spray (fog) or foam.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P331: Do NOT induce vomiting.
P308+P313: IF exposed or concerned: Get medical advice/attention.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P362+P364: Take off contaminated clothing and wash it before reuse.
P332+P313: If skin irritation occurs: Get medical attention.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing.
P337+P313: If eye irritation persists: Get medical attention.
P391: Collect spillage.
Storage
P405: Store locked up.
P403+P235: Store in a well-ventilated place. Keep cool.
P233: Keep container tightly closed.
Disposal
P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
Hazards not otherwise classified
None known.
Section 3. Composition/information on ingredients
Ingredient name CAS number %
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Substance/mixture
Occupational exposure limits, if available, are listed in Section 8.
Mixture.
styrene 100-42-5 36.9
methyl methacrylate 80-62-6 2.0
cobalt bis(2-ethylhexanoate) 136-52-7 0.3
Section 4. First aid measures
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Use of buffered baby
shampoo will aid in removal. If irritation persists, get medical attention.
Move the victim to a safe area as soon as possible. Allow the victim to rest in a well-ventilated area. If breathing is difficult, give oxygen.
If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Eye contact
Skin contact
Inhalation
Description of necessary first aid measures
Page: 2 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 4. First aid measures
Wash out mouth with water. Remove dentures if any. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not
enter the lungs. Seek immediate medical attention.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. If irritation persists, seek
medical attention. Wash contaminated clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion
Notes to physician
Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Most important symptoms/effects, acute and delayed
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Irritating to mouth, throat and stomach.
Causes serious eye irritation.
Causes skin irritation.
Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.
Eye contact
Skin contact
Inhalation
Ingestion
Over-exposure signs/symptoms
Eye contact
Inhalation
Skin contact
Ingestion
Adverse symptoms may include the following: pain or irritation, watering, redness.
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Adverse symptoms may include the following: irritation, redness.
Adverse symptoms may include the following: Irritating to mouth, throat and stomach.
Section 5. Fire-fighting measures
Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous thermal decomposition products
Specific hazards arising from the chemical
Decomposition products may include the following materials: carbon dioxide, carbon monoxide nitrogen oxides
Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a
subsequent explosion. The vapor/gas is heavier than air and will spread along the ground. Vapors may accumulate in low or confined
areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or explosion hazard. This
material is harmful to aquatic life with long lasting effects. Fire water contaminated with this material must be contained and prevented
from being discharged to any waterway, sewer or drain.
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated
in positive pressure mode.
Special protective equipment for fire-fighters
Use dry chemical, CO , water spray (fog) or foam.
Extinguishing media
Do not use water jet.
Suitable extinguishing media
Unsuitable extinguishing media
Special protective actions for fire-fighters
Page: 3 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see Section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment
if released in large quantities.
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble,
absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof
equipment. Dispose of via a licensed waste disposal contractor.
Methods and materials for containment and cleaning up
For non-emergency personnel
For emergency responders
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Do not touch or walk
through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist.
Provide adequate ventilation.
If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. See also the information in
“For non-emergency personnel”.
Small spill
Large spill
Section 7. Handling and storage
Advice on general occupational hygiene
Conditions for safe storage, including any incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash
hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating
areas. See also Section 8 for additional information on hygiene measures.
Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Eliminate all
ignition sources. Segregate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have
been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. Refer to the product label and/or technical data sheet for further information.
Protective measures
Put on appropriate personal protective equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove
contaminated clothing and protective equipment before entering eating areas. Do not breathe vapor or mist. Do not ingest. Avoid contact
with eyes, skin and clothing. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or
an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks,
open flame or any other ignition source. Use only non-sparking tools. Take precautionary measures against electrostatic discharges.
Empty containers retain product residue and can be hazardous. Do not reuse container.
Precautions for safe handling
styrene ACGIH TLV (United States, 3/2019). Absorbed through skin.
TWA: 20 ppm 8 hours.
STEL: 40 ppm 15 minutes.
OSHA PEL Z2 (United States, 2/2013).
TWA: 100 ppm 8 hours.
CEIL: 200 ppm
AMP: 600 ppm 5 minutes.
NIOSH REL (United States, 10/2016).
TWA: 50 ppm 10 hours.
TWA: 215 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Control parameters
Occupational exposure limits
Page: 4 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 8. Exposure controls/personal protection
STEL: 425 mg/m 15 minutes.
methyl methacrylate ACGIH TLV (United States, 3/2019). Skin sensitizer.
TWA: 50 ppm 8 hours.
STEL: 100 ppm 15 minutes.
NIOSH REL (United States, 10/2016).
TWA: 100 ppm 10 hours.
TWA: 410 mg/m 10 hours.
OSHA PEL (United States, 5/2018).
TWA: 100 ppm 8 hours.
TWA: 410 mg/m 8 hours.
ACGIH TLV (United States, 3/2012). Skin sensitizer.
STEL: 410 mg/m 8 hours.
TWA: 205 mg/m 8 hours.
cobalt bis(2-ethylhexanoate) OSHA PEL (United States).
TWA: 0.1 mg/m
ACGIH TLV (United States, 3/2019). Skin sensitizer. Inhalation
sensitizer.
TWA: 0.02 mg/m , (as Co) 8 hours.
Hand protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working
limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists or dusts.
Eye/face protection
Respiratory protection
Body protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Appropriate engineering controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker
exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or
dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Ensure that eyewash stations
and safety showers are close to the workstation location.
Hygiene measures
Individual protection measures
Other skin protection
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Liquid.
23.8 F / 30.6 C (Styrene)
1.1 (Water = 1)
3.6 (Air = 1) (Styrene )
5.0 mm Hg@ 68 F / 20 C (Styrene)
Aromatic.Odor
pH
Amber.Color
Evaporation rate < 1 (Butyl acetate = 1)
Flash point 88 F / 31 C (Styrene)
Not applicable.
0.01 - 0.1 ppm (Styrene)Odor threshold
Appearance
Boiling point 293 F / 145 C (Styrene)
Flammability (solid, gas) Not applicable.
Lower and upper explosive (flammable)
limits
Lower: 1.1% Upper: 6.1% (Styrene)
Page: 5 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 9. Physical and chemical properties
Solubility Slight.
Auto-ignition temperature 914 F / 490 C (Styrene)
Not available.
Viscosity Not available.
Partition coefficient: n-octanol/water
Molecular weight 1,000 to 15,000
Decomposition temperature Not available.
Section 10. Stability and reactivity
Hazardous decomposition products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat
or sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
The product is stable. Stable under recommended storage and handling conditions (see Section 7).
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials
Incompatible materials
Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
styrene LC50 Inhalation Gas. Rat 2770 ppm 4 hours
LC50 Inhalation Vapor Rat 11800 mg/m 4 hours
LC50 Inhalation Vapor Rat 5634.2 ppm 4 hours
LD50 Oral Rat 2650 mg/kg -
methyl methacrylate LC50 Inhalation Gas. Rat 7094 ppm 4 hours
LC50 Inhalation Vapor Rat 78000 mg/m 4 hours
LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 7872 mg/kg –
LD50 Oral Rat 7872 mg/kg –
cobalt bis(2-ethylhexanoate) LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 1.22 g/kg –
Ingredient name Result Species Dose Exposure
Carcinogenicity
Mutagenicity
Irritation/Corrosion
styrene Eyes – Mild irritant Human – 50 ppm –
Eyes – Moderate irritant Rabbit – 24 hours 100 mg-
Eyes – Severe irritant Rabbit – 100 mg –
Skin – Mild irritant Rabbit – 500 mg –
Skin – Moderate irritant Rabbit – 100 % –
Ingredient name Result Score Exposure Observation
Sensitization
Species
Information on toxicological effects
Classification
styrene – 2A Reasonably anticipated to be a human carcinogen.
methyl methacrylate – 3 –
cobalt bis(2-ethylhexanoate) – 2B Reasonably anticipated to be a human carcinogen.
Ingredient name NTPIARCACGIH
May cause sensitization by skin contact.
1) Negative Study A published study concluded that the mechanism for producing cancer in mice exposed to styrene
is not applicable in human metabolism. (June 2013 Pharmacology & Toxicology 66 (2013))
2) Negative Study A recent update to an extensive study of reinforced plastic workers from 1948-1977 concluded that
there was no coherent evidence that styrene exposure increased risk of cancer (March 2013 Epidemiology Vol. 24
Issue 2)
3) Positive Study Styrene induced pulmonary toxicity and carcinogenicity in mice was shown to be caused by a
metabolite of styrene, probably styrene oxide. (Dec.2001 Toxicology Vol.169 Issue 2)
Page: 6 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 11. Toxicological information
Teratogenicity
Reproductive toxicity
Inhalation
Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.
Irritating to mouth, throat and stomach.
Ingestion
Skin contact
Causes skin irritation.
Causes serious eye irritation.
Eye contact
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Adverse symptoms may include the following: Irritating to mouth, throat and stomach.
Adverse symptoms may include the following: irritation, redness.
Eye contact
Adverse symptoms may include the following: pain or irritation, watering, redness.
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Aspiration hazard
Potential acute health effects
No known significant effects or critical hazards.
Suspected of damaging the unborn child.
No known significant effects or critical hazards.
May cause respiratory irritation.
A study of long term effects of workers exposed to styrene levels in the range of 25-35 ppm, 8 hour TWA, indicated a possible mild
hearing loss.
May be fatal if swallowed and enters airways.
Inhalation
Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects
No known effect according to our database.
styrene 0.35 13.49 low
methyl methacrylate 1.38 – low
cobalt bis(2-ethylhexanoate) – 15600 high
Toxicity
styrene Acute EC50 1400 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
72 hours
Acute EC50 720 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
Acute EC50 4700 g/l Fresh water Daphnia – Daphnia magna 48 hours
Acute LC50 52 mg/l Marine water Crustaceans – Artemia salina 48 hours
Acute LC50 4020 g/l Fresh water Fish – Pimephales promelas 96 hours
Chronic NOEC 63 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
methyl methacrylate Acute LC50 130000 g/l Fresh water Fish – Pimephales promelas – Adult96 hours
Ingredient name SpeciesResult Exposure
Persistence and degradability
Soil/water partition coefficient (KOC)
Not available.
Mobility in soil
Not available.
Ingredient name
Page: 7 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues.
Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-
products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid disposal. Attempt to use product completely in accordance with intended use. Waste packaging should be
recycled. Incineration or landfill should only be considered when recycling is not feasible.
Disposal methods
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any
available use-specific information provided in the Exposure Scenario(s).
Special precautions
This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues. Do not cut, weld or grind used containers unless they
have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
Resin Solution
3
III
UN1866UN number
Proper shipping name
Transport hazard class(es)
Packing group
DOT /TDG / IMDG/IMO / ICAO/IATA and National regulations.
Additional information US regulations require the reporting of spills when the amount exceeds the Reportable
Quantity (RQ) for specific components of this material. See CERCLA in Section 15,
Regulatory Information, for the Reportable Quantities.
Environmental hazards Marine pollutant: No.
Special precautions for user Transport within user s premises: always transport in closed containers that are upright and
secure. Ensure that persons transporting the product know what to do in the event of an
accident or spillage.
IMDGEmergency schedules (EmS): F-E, S-E
Remarks: FP- 31 C
IATANo additional information.
Section 15. Regulatory information
International regulations lists
All components are listed or exempted.
SARA 313
SARA 311/312
United States inventory (TSCA 8b)
Australia (AICS) All components are listed or exempted.
Canada (DSL) All components are listed or exempted.
China (IECSC) All components are listed or exempted.
Europe (EINECS) Not determined.
Japan Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Republic of Korea (KECI) All components are listed or exempted.
Malaysia (EHS Register) Not determined.
New Zealand (NZIoC) All components are listed or exempted.
Philippines (PICCS) Not determined.
Taiwan (CSNN) All components are listed or exempted.
Per the June 13, 2016 Federal Register notice, EPA harmonized the EPCRA 311/312 hazard categories with the 2012 OSHA hazard
communication standard for classifying and labeling of chemicals (i.e. GHS). Please refer to Section 2 of the SDS to identify the appropriate
hazard categories for reporting purposes.
U.S. Federal regulations
Page: 8 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 15. Regulatory information
Ingredient name
styrene 100-42-5
methyl methacrylate 80-62-6
cobalt bis(2-ethylhexanoate) 136-52-7
Form R – Reporting
requirements
CAS number
California Prop. 65
State regulations
styrene – 1000 lbs. (453.6 kg)
methyl methacrylate – 1000 lbs. (453.6 kg)
CERCLA RQ –
WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer,
and Ethylene Glycol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Section 16. Other information
History
Version
Prepared by
AOC is a registered trademark of the AOC group of companies.
The information contained in this data sheet is based on laboratory data and field experience. We believe this information to be reliable, but do not
guarantee its applicability to the user s process or assume any liability for occurrences arising out of its use. The user, by accepting the products
as described herein, agrees to be responsible for thoroughly testing each such product before committing it to production.
Altek , Atryl , Atryl TCA , Chroma-Tek , EcoTek , FirePel , Hydropel , Moldtru , PulTru , Vibrin , Vicast , Vipel , the AOC name, the
AOC logo, and the Trusted Solutions logo are registered trademarks of the AOC group of companies.
Our recommendations should not be construed as inducements to infringe any patent or violate any law, safety code or insurance regulation.
The information and recommendations contained herein are to the best of our knowledge accurate and reliable, but no rights whatsoever may be
derived by any party other than those expressly agreed to with a selling entity of the AOC group of companies in a legally binding agreement. AOC
hereby makes no warranty of any kind, express or implied, including those of merchantability and fitness for purpose. Unless explicitly agreed to in
writing by AOC otherwise, all offers, quotations, sales and deliveries of AOC products are subject to the general conditions of sale of AOC.
Notice to reader
Date of previous issue
Indicates information that has changed from previously issued version.
Key to abbreviations ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by
the Protocol of 1978. (“Marpol” = marine pollution)
UN = United Nations
03/01/2020
05/15/2019
4.1
National Fire Protection Association (U.S.A.)
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright 1997, National Fire Protection Association, Quincy, MA 02269. This
reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.
Copyright 2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and
reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether
the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.
AOC Corporate Regulatory Affairs
This Safety Data Sheet (SDS) and its content are the confidential and proprietary information of AOC and it may not be modified, altered,
deconstructed, or presented in any other manner, without the explicit authorization of AOC and/or its legal counsel.
1
3
2
Health
Special
Instability
Flammability
Date of issue
Page: 9 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
by | Sep 27, 2025
Vinyl Ester Resin
Product name
Product type
Section 1. Identification
Chemical family Aromatic.
Relevant identified uses of the substance or mixture and uses advised against
SDS No. NA-1504:1132 (Version: 4.1)
Uses advised against
Identified uses Used in the manufacture of thermoset plastic parts.
No additional information.
LPT-68000
SAFETY DATA SHEET
Date of issue: 03/01/2020
Date of previous issue: 05/15/2019
Emergency telephone number
Supplier’s details
CHEMTREC Within USA and Canada
CHEMTREC Outside USA and Canada
CANUTEC Within Canada
+1 (800) 424-9300
+1 (703) 527-3887
+1 (613) 996-6666
CCN1023
AOC
955 Highway 57 East
Collierville, TN 38017
Phone Number: (901) 854-2800
Hours: 8AM-5pm (Central Time) Mon-Fri
AOC
38 Royal Road
Guelph, Ontario Canada N1H 1G3
Phone Number: (519) 821-5180
Hours: 8am-5pm (Eastern) Mon-Fri
E-Mail: aoc.sds@aocresins.com
Website: www.aocresins.com
United States: Canada:
Section 2. Hazards identification
OSHA/HCS status
FLAMMABLE LIQUIDS Category 3 H226
ACUTE TOXICITY (Inhalation) Category 4 H332
SKIN IRRITATION Category 2 H315
EYE IRRITATION Category 2A H319
CARCINOGENICITY Category 2 H351
REPRODUCTIVE TOXICITY Category 2 H361d
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) Category 3 H335
SPECIFIC TARGET ORGAN TOXICITY (REPEATED EXPOSURE) Category 1 H372
ASPIRATION HAZARD Category 1 H304
Classification of the substance or mixture
Signal word
Danger
Hazard statements
H226: Flammable liquid and vapor.
H332: Harmful if inhaled.
H319: Causes serious eye irritation.
H315: Causes skin irritation.
H361d: Suspected of damaging the unborn child.
H351: Suspected of causing cancer.
H304: May be fatal if swallowed and enters airways.
H335: May cause respiratory irritation.
H372: Causes damage to organs through prolonged or repeated exposure if inhaled. (hearing organs, kidneys)
Hazard pictograms
Precautionary statements
GHS label elements
General
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Page: 1 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 2. Hazards identification
Prevention
P201: Obtain special instructions before use.
P202: Do not handle until all safety precautions have been read and understood.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P210: Keep away from heat, sparks, open flames and hot surfaces. – No smoking.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/lighting/material-handling equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P233: Keep container tightly closed.
P271: Use only outdoors or in a well-ventilated area.
P260: Do not breathe vapor or mist.
P270: Do not eat, drink or smoke when using this product.
P264: Wash hands thoroughly after handling.
Response
P314: Get medical attention if you feel unwell.
P308+P313: IF exposed or concerned: Get medical attention.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P312: Call a POISON CENTER or physician if you feel unwell.
P370+P378: In case of fire: Use dry chemical, CO , water spray (fog) or foam.
P301+P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P331: Do NOT induce vomiting.
P308+P313: IF exposed or concerned: Get medical advice/attention.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P362+P364: Take off contaminated clothing and wash it before reuse.
P332+P313: If skin irritation occurs: Get medical attention.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue
rinsing.
P337+P313: If eye irritation persists: Get medical attention.
P391: Collect spillage.
Storage
P405: Store locked up.
P403+P235: Store in a well-ventilated place. Keep cool.
P233: Keep container tightly closed.
Disposal
P501: Dispose of contents and container in accordance with all local, regional, national and international regulations.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
Hazards not otherwise classified
None known.
Section 3. Composition/information on ingredients
Ingredient name CAS number %
There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are
classified as hazardous to health or the environment and hence require reporting in this section.
Substance/mixture
Occupational exposure limits, if available, are listed in Section 8.
Mixture.
styrene 100-42-5 36.9
methyl methacrylate 80-62-6 2.0
cobalt bis(2-ethylhexanoate) 136-52-7 0.3
Section 4. First aid measures
Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Use of buffered baby
shampoo will aid in removal. If irritation persists, get medical attention.
Move the victim to a safe area as soon as possible. Allow the victim to rest in a well-ventilated area. If breathing is difficult, give oxygen.
If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention.
Eye contact
Skin contact
Inhalation
Description of necessary first aid measures
Page: 2 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 4. First aid measures
Wash out mouth with water. Remove dentures if any. Stop if the exposed person feels sick as vomiting may be dangerous. Do not
induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not
enter the lungs. Seek immediate medical attention.
In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. If irritation persists, seek
medical attention. Wash contaminated clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion
Notes to physician
Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
Most important symptoms/effects, acute and delayed
See toxicological information (Section 11)
Indication of immediate medical attention and special treatment needed, if necessary
Irritating to mouth, throat and stomach.
Causes serious eye irritation.
Causes skin irritation.
Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.
Eye contact
Skin contact
Inhalation
Ingestion
Over-exposure signs/symptoms
Eye contact
Inhalation
Skin contact
Ingestion
Adverse symptoms may include the following: pain or irritation, watering, redness.
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Adverse symptoms may include the following: irritation, redness.
Adverse symptoms may include the following: Irritating to mouth, throat and stomach.
Section 5. Fire-fighting measures
Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
Hazardous thermal decomposition products
Specific hazards arising from the chemical
Decomposition products may include the following materials: carbon dioxide, carbon monoxide nitrogen oxides
Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and the container may burst, with the risk of a
subsequent explosion. The vapor/gas is heavier than air and will spread along the ground. Vapors may accumulate in low or confined
areas or travel a considerable distance to a source of ignition and flash back. Runoff to sewer may create fire or explosion hazard. This
material is harmful to aquatic life with long lasting effects. Fire water contaminated with this material must be contained and prevented
from being discharged to any waterway, sewer or drain.
Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated
in positive pressure mode.
Special protective equipment for fire-fighters
Use dry chemical, CO , water spray (fog) or foam.
Extinguishing media
Do not use water jet.
Suitable extinguishing media
Unsuitable extinguishing media
Special protective actions for fire-fighters
Page: 3 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 6. Accidental release measures
Environmental precautions
Personal precautions, protective equipment and emergency procedures
Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses,
basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-
combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see Section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers. Inform the relevant authorities if the
product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful to the environment
if released in large quantities.
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble,
absorb with an inert dry material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof
equipment. Dispose of via a licensed waste disposal contractor.
Methods and materials for containment and cleaning up
For non-emergency personnel
For emergency responders
No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Do not touch or walk
through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist.
Provide adequate ventilation.
If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
Wear appropriate respirator when ventilation is inadequate. Put on appropriate personal protective equipment. See also the information in
“For non-emergency personnel”.
Small spill
Large spill
Section 7. Handling and storage
Advice on general occupational hygiene
Conditions for safe storage, including any incompatibilities
Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash
hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating
areas. See also Section 8 for additional information on hygiene measures.
Store in accordance with local regulations. Store in a segregated and approved area. Store in original container protected from direct
sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Eliminate all
ignition sources. Segregate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have
been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination. Refer to the product label and/or technical data sheet for further information.
Protective measures
Put on appropriate personal protective equipment (see Section 8). Eating, drinking and smoking should be prohibited in areas where this
material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove
contaminated clothing and protective equipment before entering eating areas. Do not breathe vapor or mist. Do not ingest. Avoid contact
with eyes, skin and clothing. Avoid release to the environment. Use only with adequate ventilation. Wear appropriate respirator when
ventilation is inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or
an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks,
open flame or any other ignition source. Use only non-sparking tools. Take precautionary measures against electrostatic discharges.
Empty containers retain product residue and can be hazardous. Do not reuse container.
Precautions for safe handling
styrene ACGIH TLV (United States, 3/2019). Absorbed through skin.
TWA: 20 ppm 8 hours.
STEL: 40 ppm 15 minutes.
OSHA PEL Z2 (United States, 2/2013).
TWA: 100 ppm 8 hours.
CEIL: 200 ppm
AMP: 600 ppm 5 minutes.
NIOSH REL (United States, 10/2016).
TWA: 50 ppm 10 hours.
TWA: 215 mg/m 10 hours.
STEL: 100 ppm 15 minutes.
Section 8. Exposure controls/personal protection
Ingredient name Exposure limits
Control parameters
Occupational exposure limits
Page: 4 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 8. Exposure controls/personal protection
STEL: 425 mg/m 15 minutes.
methyl methacrylate ACGIH TLV (United States, 3/2019). Skin sensitizer.
TWA: 50 ppm 8 hours.
STEL: 100 ppm 15 minutes.
NIOSH REL (United States, 10/2016).
TWA: 100 ppm 10 hours.
TWA: 410 mg/m 10 hours.
OSHA PEL (United States, 5/2018).
TWA: 100 ppm 8 hours.
TWA: 410 mg/m 8 hours.
ACGIH TLV (United States, 3/2012). Skin sensitizer.
STEL: 410 mg/m 8 hours.
TWA: 205 mg/m 8 hours.
cobalt bis(2-ethylhexanoate) OSHA PEL (United States).
TWA: 0.1 mg/m
ACGIH TLV (United States, 3/2019). Skin sensitizer. Inhalation
sensitizer.
TWA: 0.02 mg/m , (as Co) 8 hours.
Hand protection
Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is
necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working
limits of the selected respirator.
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products
if a risk assessment indicates this is necessary.
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists or dusts.
Eye/face protection
Respiratory protection
Body protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Appropriate engineering controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker
exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or
dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end
of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Ensure that eyewash stations
and safety showers are close to the workstation location.
Hygiene measures
Individual protection measures
Other skin protection
Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this product.
Section 9. Physical and chemical properties
Physical state
Melting point
Vapor pressure
Relative density
Vapor density
Liquid.
23.8 F / 30.6 C (Styrene)
1.1 (Water = 1)
3.6 (Air = 1) (Styrene )
5.0 mm Hg@ 68 F / 20 C (Styrene)
Aromatic.Odor
pH
Amber.Color
Evaporation rate < 1 (Butyl acetate = 1)
Flash point 88 F / 31 C (Styrene)
Not applicable.
0.01 - 0.1 ppm (Styrene)Odor threshold
Appearance
Boiling point 293 F / 145 C (Styrene)
Flammability (solid, gas) Not applicable.
Lower and upper explosive (flammable)
limits
Lower: 1.1% Upper: 6.1% (Styrene)
Page: 5 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 9. Physical and chemical properties
Solubility Slight.
Auto-ignition temperature 914 F / 490 C (Styrene)
Not available.
Viscosity Not available.
Partition coefficient: n-octanol/water
Molecular weight 1,000 to 15,000
Decomposition temperature Not available.
Section 10. Stability and reactivity
Hazardous decomposition products
Conditions to avoid
Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat
or sources of ignition.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
The product is stable. Stable under recommended storage and handling conditions (see Section 7).
Chemical stability
Reactive or incompatible with the following materials: oxidizing materials
Incompatible materials
Possibility of hazardous reactions
Under normal conditions of storage and use, hazardous reactions will not occur.
Reactivity
No specific test data related to reactivity available for this product or its ingredients.
Section 11. Toxicological information
Acute toxicity
styrene LC50 Inhalation Gas. Rat 2770 ppm 4 hours
LC50 Inhalation Vapor Rat 11800 mg/m 4 hours
LC50 Inhalation Vapor Rat 5634.2 ppm 4 hours
LD50 Oral Rat 2650 mg/kg -
methyl methacrylate LC50 Inhalation Gas. Rat 7094 ppm 4 hours
LC50 Inhalation Vapor Rat 78000 mg/m 4 hours
LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 7872 mg/kg –
LD50 Oral Rat 7872 mg/kg –
cobalt bis(2-ethylhexanoate) LD50 Dermal Rabbit >5 g/kg –
LD50 Oral Rat 1.22 g/kg –
Ingredient name Result Species Dose Exposure
Carcinogenicity
Mutagenicity
Irritation/Corrosion
styrene Eyes – Mild irritant Human – 50 ppm –
Eyes – Moderate irritant Rabbit – 24 hours 100 mg-
Eyes – Severe irritant Rabbit – 100 mg –
Skin – Mild irritant Rabbit – 500 mg –
Skin – Moderate irritant Rabbit – 100 % –
Ingredient name Result Score Exposure Observation
Sensitization
Species
Information on toxicological effects
Classification
styrene – 2A Reasonably anticipated to be a human carcinogen.
methyl methacrylate – 3 –
cobalt bis(2-ethylhexanoate) – 2B Reasonably anticipated to be a human carcinogen.
Ingredient name NTPIARCACGIH
May cause sensitization by skin contact.
1) Negative Study A published study concluded that the mechanism for producing cancer in mice exposed to styrene
is not applicable in human metabolism. (June 2013 Pharmacology & Toxicology 66 (2013))
2) Negative Study A recent update to an extensive study of reinforced plastic workers from 1948-1977 concluded that
there was no coherent evidence that styrene exposure increased risk of cancer (March 2013 Epidemiology Vol. 24
Issue 2)
3) Positive Study Styrene induced pulmonary toxicity and carcinogenicity in mice was shown to be caused by a
metabolite of styrene, probably styrene oxide. (Dec.2001 Toxicology Vol.169 Issue 2)
Page: 6 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 11. Toxicological information
Teratogenicity
Reproductive toxicity
Inhalation
Harmful if inhaled. May cause respiratory irritation. May cause drowsiness or dizziness.
Irritating to mouth, throat and stomach.
Ingestion
Skin contact
Causes skin irritation.
Causes serious eye irritation.
Eye contact
Symptoms related to the physical, chemical and toxicological characteristics
Skin contact
Ingestion
Adverse symptoms may include the following: respiratory tract irritation, coughing.
Adverse symptoms may include the following: Irritating to mouth, throat and stomach.
Adverse symptoms may include the following: irritation, redness.
Eye contact
Adverse symptoms may include the following: pain or irritation, watering, redness.
Specific target organ toxicity (single exposure)
Specific target organ toxicity (repeated exposure)
Aspiration hazard
Potential acute health effects
No known significant effects or critical hazards.
Suspected of damaging the unborn child.
No known significant effects or critical hazards.
May cause respiratory irritation.
A study of long term effects of workers exposed to styrene levels in the range of 25-35 ppm, 8 hour TWA, indicated a possible mild
hearing loss.
May be fatal if swallowed and enters airways.
Inhalation
Section 12. Ecological information
LogPow BCF Potential
Bioaccumulative potential
Other adverse effects
No known effect according to our database.
styrene 0.35 13.49 low
methyl methacrylate 1.38 – low
cobalt bis(2-ethylhexanoate) – 15600 high
Toxicity
styrene Acute EC50 1400 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
72 hours
Acute EC50 720 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
Acute EC50 4700 g/l Fresh water Daphnia – Daphnia magna 48 hours
Acute LC50 52 mg/l Marine water Crustaceans – Artemia salina 48 hours
Acute LC50 4020 g/l Fresh water Fish – Pimephales promelas 96 hours
Chronic NOEC 63 g/l Fresh water Algae – Pseudokirchneriella
subcapitata
96 hours
methyl methacrylate Acute LC50 130000 g/l Fresh water Fish – Pimephales promelas – Adult96 hours
Ingredient name SpeciesResult Exposure
Persistence and degradability
Soil/water partition coefficient (KOC)
Not available.
Mobility in soil
Not available.
Ingredient name
Page: 7 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 13. Disposal considerations
The generation of waste should be avoided or minimized wherever possible. Empty containers or liners may retain some product residues.
Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-
products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local
authority requirements. Avoid disposal. Attempt to use product completely in accordance with intended use. Waste packaging should be
recycled. Incineration or landfill should only be considered when recycling is not feasible.
Disposal methods
The information in this section contains generic advice and guidance. The list of Identified Uses in Section 1 should be consulted for any
available use-specific information provided in the Exposure Scenario(s).
Special precautions
This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues. Do not cut, weld or grind used containers unless they
have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
Resin Solution
3
III
UN1866UN number
Proper shipping name
Transport hazard class(es)
Packing group
DOT /TDG / IMDG/IMO / ICAO/IATA and National regulations.
Additional information US regulations require the reporting of spills when the amount exceeds the Reportable
Quantity (RQ) for specific components of this material. See CERCLA in Section 15,
Regulatory Information, for the Reportable Quantities.
Environmental hazards Marine pollutant: No.
Special precautions for user Transport within user s premises: always transport in closed containers that are upright and
secure. Ensure that persons transporting the product know what to do in the event of an
accident or spillage.
IMDGEmergency schedules (EmS): F-E, S-E
Remarks: FP- 31 C
IATANo additional information.
Section 15. Regulatory information
International regulations lists
All components are listed or exempted.
SARA 313
SARA 311/312
United States inventory (TSCA 8b)
Australia (AICS) All components are listed or exempted.
Canada (DSL) All components are listed or exempted.
China (IECSC) All components are listed or exempted.
Europe (EINECS) Not determined.
Japan Japan inventory (ENCS): Not determined.
Japan inventory (ISHL): Not determined.
Republic of Korea (KECI) All components are listed or exempted.
Malaysia (EHS Register) Not determined.
New Zealand (NZIoC) All components are listed or exempted.
Philippines (PICCS) Not determined.
Taiwan (CSNN) All components are listed or exempted.
Per the June 13, 2016 Federal Register notice, EPA harmonized the EPCRA 311/312 hazard categories with the 2012 OSHA hazard
communication standard for classifying and labeling of chemicals (i.e. GHS). Please refer to Section 2 of the SDS to identify the appropriate
hazard categories for reporting purposes.
U.S. Federal regulations
Page: 8 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
Section 15. Regulatory information
Ingredient name
styrene 100-42-5
methyl methacrylate 80-62-6
cobalt bis(2-ethylhexanoate) 136-52-7
Form R – Reporting
requirements
CAS number
California Prop. 65
State regulations
styrene – 1000 lbs. (453.6 kg)
methyl methacrylate – 1000 lbs. (453.6 kg)
CERCLA RQ –
WARNING: This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer,
and Ethylene Glycol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Section 16. Other information
History
Version
Prepared by
AOC is a registered trademark of the AOC group of companies.
The information contained in this data sheet is based on laboratory data and field experience. We believe this information to be reliable, but do not
guarantee its applicability to the user s process or assume any liability for occurrences arising out of its use. The user, by accepting the products
as described herein, agrees to be responsible for thoroughly testing each such product before committing it to production.
Altek , Atryl , Atryl TCA , Chroma-Tek , EcoTek , FirePel , Hydropel , Moldtru , PulTru , Vibrin , Vicast , Vipel , the AOC name, the
AOC logo, and the Trusted Solutions logo are registered trademarks of the AOC group of companies.
Our recommendations should not be construed as inducements to infringe any patent or violate any law, safety code or insurance regulation.
The information and recommendations contained herein are to the best of our knowledge accurate and reliable, but no rights whatsoever may be
derived by any party other than those expressly agreed to with a selling entity of the AOC group of companies in a legally binding agreement. AOC
hereby makes no warranty of any kind, express or implied, including those of merchantability and fitness for purpose. Unless explicitly agreed to in
writing by AOC otherwise, all offers, quotations, sales and deliveries of AOC products are subject to the general conditions of sale of AOC.
Notice to reader
Date of previous issue
Indicates information that has changed from previously issued version.
Key to abbreviations ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by
the Protocol of 1978. (“Marpol” = marine pollution)
UN = United Nations
03/01/2020
05/15/2019
4.1
National Fire Protection Association (U.S.A.)
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright 1997, National Fire Protection Association, Quincy, MA 02269. This
reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.
Copyright 2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be interpreted and applied only by properly trained individuals to identify fire, health and
reactivity hazards of chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA 49 and NFPA 325, which would be used as a guideline only. Whether
the chemicals are classified by NFPA or not, anyone using the 704 systems to classify chemicals does so at their own risk.
AOC Corporate Regulatory Affairs
This Safety Data Sheet (SDS) and its content are the confidential and proprietary information of AOC and it may not be modified, altered,
deconstructed, or presented in any other manner, without the explicit authorization of AOC and/or its legal counsel.
1
3
2
Health
Special
Instability
Flammability
Date of issue
Page: 9 of 9Date of issue: 03/01/2020
Date of previous issue: 05/15/2019NA-1504:1132 (Version: 4.1)
LPT-68000
