39STYRENE3_TDS.pdf
39STYRENE1_TDS.pdf
39PROPG-D_TDS.pdf
39OMS-D_TDS.pdf
Page 1 of 1
Technical Data Sheet
Odorless Mineral Spirits
Test Unit Method Min Max Qualitative
Aromatics ppm ASTM E-169 – 1000 –
Distillation DP FAH ASTM D-86 – 395 –
Distillation, IBP FAH ASTM D-86 330 – –
Flash Point, TCC FAH ASTM D-56 115 – –
Odor – Smell – – Pass
Saybolt Color SAY ASTM D-6045 30 – –
Specific Gravity 60/60 F – ASTM D4052 0.740 0.770 –
These specifications are typical and represent the quality of our product in general. The information
herein is to assist customers in determining whether out product is suitable for their applications. Our
product is intended for sale to industrial and commercial customers. We recommend that customers inspect
and test our products before use and satisfy themselves as to content and suitability. We warrant that our
products will meet our written specification. Nothing herein shall constitute any other warranty expressed
or implied, including any warranty of merchantability or fitness, nor is protection from any law or patent
to be inferred. Health and safety information, as well as safe handling instructions are available through
our Safety Data Sheet for this product. For more information about our products, please call (323)245-
2345.
Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
39MSD60-D_TDS.pdf
Technical Data Sheet
Mineral Spirits
Property Units Limits Results Method
Purity
Appearance
Color Saybolt >28 30
PH
Water
Density @ 15.6C API 43.2 57.5 54.3 ASTM D 4052
Disclaimer: These specifications represent the quality of our product in general
and may vary from batch to batch and producer to producer. If you are looking
for particular specifications please call our office or email your representative.
Shell Oil and Chemical Distributor
P.O. Box 39524
4578 Brazil Street
Los Angeles, CA 90039
Tel: (323) 245-2345
(818) 242-8486
Fax (818) 242-7804
www.aglayne.com
39MMAG_TDS.pdf
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
39MMA_TDS.pdf
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet
39MMA-D_TDS.pdf
Interplastic Corporation makes no warranties regarding any material and/or samples described in this report. All properties
specified above are approximate and may vary from material delivered. Delivered material complies with the Certificate of
Analysis on each shipment of product. Interplastic Corporation makes no representations of fact regarding the material
except those specified above. Final determination of part or application and the suitability of the material for the use
contemplated is the sole responsibility of the buyer. Our technical sales representatives will assist in developing procedures
to fit individual requirements as a customer accommodation, but all advice is accepted at your risk and should be checked for
suitability to your particular processes and needs. These test data and properties are based on results obtained for a specific
material under the specified test conditions. They are not to be used as specifications and are not warranted as performance
attributes for any product or system.
INTERPLASTIC CORPORATION
2015 Northeast Broadway Street
Minneapolis, Minnesota 55413-1775
651.481.6860 Fax 612.331.4235
www.interplastic.com
Revised: 10/2022
COR50-ZZ-00805 is methyl methacrylate monomer (MMA). MMA is a colorless liquid for industrial use primarily as a
reactive solvent (diluent) for polymerization. MMA contains a small amount of stabilizing inhibitor to prevent premature
polymerization.
APPLICATION TYPICAL PROPERTIES
Colorless industrial reactive diluent for polymerization Methyl Methacrylate
Viscosity 0.53 cPs
APHA Color, maximum 10
Specific Gravity, 25 C 0.939
Flash Point, C 10
COR50-ZZ-00805
Reactive Diluent Solution
Technical Data Sheet