by | Sep 27, 2025
DESCRIPTION:
COMPATIBLE LIDS:
ITEM NUMBERS
WITH DESCRIPTION:
RESIN:
PRINT AREA:
LABEL SIZE:
VOLUME: (Brimfull)16.4 fl. oz. 485ml
QDSL122 – Rev. D – 1/19/2017
Revision Date and History:
9-25-2019 – New Product
SHIPPING PALLET CONFIGURATION
Standard pallet quantity
may change at time of shipment.
AVERAGE PART WEIGHT: 16.7 g
Note: The above information has been provided in
good faith. However, we will not be held responsible
for errors resulting in the utilization of this
information. This document is subject to change at
any time. Please verify the accuracy of this
information with your Sales Representative at time of
utilization.
6110 Abbott Drive, Omaha, NE 68110-2805
P.O. Box 8400, Omaha, NE 68108-0400
Phone: 402-341-7300 | 800-228-9545
Fax: 402-346-2509
www.airliteplastics.com
PALLET HEIGHT: 97″
PARTS PER PALLET: 15,000
CARTONS PER PALLET:
CARTONS PER LAYER: 6
1651B
309 Diameter – 16 oz. PP Cup
PRODUCT INFORMATION SHEET
500
Vertical
18.9 lbs.
20 stacks of 25
Polypropylene (PP)
PACKAGING SPECIFICATIONS
L309 – LLDPE Flat Lid
L309RA – LLDPE Recessed Lid
L309H – PP Lid with Breathable Holes
L309i – PP IML Flat Lid
C016C501CB – 01C White Freezer Grade
C016C500FB – 00F Natural Freezer Grade
2-5/8″ x 10″
LENGTH
19.00″
WIDTH
15.31″
HEIGHT
18.25″
Front or Back: 2-5/8″ x 3-3/4″
CARTON CONFIGURATION
NUMBER OF LAYERS: 5
30
PARTS PER CARTON:
PARTS / STACKS:
CARTON WEIGHT:
STACK ORIENTATION:
by | Sep 27, 2025
PRODUCT INFORMATION SHEET
Standard pallet quantity may change
at shipment.
SHIPPING PALLET
CONFIGURATION
CARTON CONFIGURATION
AVERAGE PART WEIGHT: 14.5 g
DESCRIPTION: 16 oz PP Cup – 408 Diameter
COMPATIBLE LIDS: L408 Flat Lid – L408N Flat Lid – L408R Recessed Lid
ITEM NUMBER / DESCRIPTION:
RESIN: Polypropylene
PRINT AREA: 2-1/8″ X 12-1/8″
LABEL SIZE: Front or Back: 2-1/8″ X 4-1/2″
VOLUME: (Brimfull): 18.6 fl. oz. 550 ml.
W
L
H
24.3 ” 19.3 ” 17.6 ”
LENGTH: WIDTH: HEIGHT:
PARTS / CARTON: 1,000
PARTS / STACK: 20 of 50
CARTON WEIGHT: 32.5 lbs
STACK ORIENTATION: Vertical
PACKAGING SPECIFICATIONS
CARTONS / LAYER: 4
NUMBER OF LAYERS: 5
CARTONS / PALLET: 20
PALLET HEIGHT: 94”
PARTS / PALLET: 20,000
C016Z500F – 00F Natural Freezer Grade
C016Z501C – 01C White Non-Freezer Grade
C016Z501C-C – 01C-C White Freezer Grade
Z1651
Note: The above information has been provided in good faith,
however, we will not be held responsible for errors resulting in the
utilization of this information. This document is subject to change
at any time. Please verify the accuracy of this information with
your Sales Representative at time of Utilization.
6110 Abbott Drive, Omaha, NE 68110-2805
P.O. Box 1649 Omaha, NE 68101-1649
Phone: (402) 341-7300 (800) 228-9545
Fax: (402) 346-2509
www.airliteplastics.com
QD121
Date issued: July 13, 2005
Revised:
by | Sep 27, 2025
by | Sep 27, 2025
TECHNICAL DATA SHEET
(T132BS)
Products Description
T132BS designed for use in spray up with general purpose and silane sizing, it has an excellent compatibility with
unsaturated polyester (UP) and vinyl resin(VE) system.
T132BS mainly apply for the truck body parts, unit bath, yacht, etc.
Characteristics Products Code
Low static electricity and excellent choppability and dispersity. ERS240-T132BS
Fast wet out and easy exhaust bubble. E: Eglass
Used for various of spray gun and transport system. RS: Multi-end Roving
Providing composites with excellent physical and 240: Linear Density 2400tex
chemical properties and high intension. T132BS: Sizing Code
Technical Data
Testing Item Testing Methord Standard Value
Moisture Content (%) GB/T 9914.1-2001 idt ISO 3344 1997 0.20
Loss on Ignition (%) GB/T 9914.2-2001 eqv ISO 1887 1995 1.22
Linear Density (tex) GB/T 7690.1-2001 idt ISO 1889 1997 2400/3100
Packaging
T132BS is packed in thermoplastic or PE bags and stacked on pallets or separately put in cartons. Each
pallet stacks 48 or 64 rolls, each roll weights 19kg. Pallets should not be stacked more than 2 layers and
cartons not in more than 5 layers. Roll packaging Each roll is wrapped in PE film, stacked on pallets or
put into cartons.
Storage
Product should be stored in dry, cool and rainproof place. Optimum storage conditions are between the
temperature 5-35 and with the humidity between 35-65%.it is recommended that the product should
be stored under room temperature for at least 24 hours before use. Prior to using the product, please do
not open the bag to prevent moisture getting into product. The product should be used within 12
months from the time of delivery.
by | Sep 27, 2025
TECHNICAL DATA SHEET
(TCR132D)
Description
TCR glass multi- end continuous roving without mechanical twist roving, with excellent acid corrosion resistance.
TCR132D is for general purpose spray up application, silane sizing, excellent compatibility with unsaturated
polyester and vinyl resin.
Characteristics Product code
Low static electricity, TCR132D-2400- 11S
Excellent choppability and dispersity TCR TCR-glass
Fast wet out and excellent mold conformity 132D Product and sizing code
Suitable for different gun and manipulator system 2400 Linear density 2400tex
Good mechanical properties, high tensile modulus 11 Filament diameter
S Assembled roving
Technical Data
Packaging
Roving is packed in thermoplastic or PE bags and stacked on pallets or separately put in cartons.
Each pallet stacks 48 or 64 rolls, each roll weighs 19kg or according to the demand of customer.
Pallets should not be stacked over 2 layers and cartons not over 5 layers.
Storage
This product should be stored in a dry, cool and rainproof place, with temperature from 5 to 35
and humidity between 35% and 65%. It is recommended to be put under room temperature for over
24 hours prior to use. Keeping in intact package when not used to avoid damp
Test item test standard standard value
moisture (%) GB/T 9914.1-2001 idt ISO 3344 1997 0.20
LOI (%) GB/T 9914.2-2001 eqv ISO 1887 1995 1.05
Linear density (tex) GB/T 7690.1-2001 idt ISO 1889 1997 2400,3100
by | Sep 27, 2025
Nittobo
This technical documentation is an evaluation result offered for inside evaluation
in your company, and it is only an example of the measurement to the last, and we
are not things guaranteeing equal to the purpose of your company without being
concerned with clear statement or a suggestion.
In addition, we are not things taking responsibility even if it is what kind of kind
about the damage to be caused by the use of this technical documentation, the
handling or safekeeping.
Aug.10.2010
GLASSFIBER
TECHNICAL DATA
RS240PG-633WN
Product Data (nominal values)
RS240PG- 633WN
Strand Treatment – Silane
Roving Tex
[Tex] 2340
Loss on Ignition
[%] 1.10
Solubility in Acetone
[%] 15
Moisture Content
[%] Less than0.1
Alkali Content
[%] Less than0.8
Package Height
[mm] 260
Package Diameter
[mm] 270
Package Weight
[kg] 18.0
by | Sep 27, 2025
by | Sep 27, 2025
by | Sep 27, 2025
Information
PO box 45 – 3900 AA
Verlaat
22 – 3901 RG
Veenendaal
The Netherlands
T
+31 (0)318 537 111
composites@lantor.com
Soric
XF
Datasheet
Soric
XF
Lantor Soric
XF
The cost effective sol ution for closed mould processes
Is used as core material and infusion medium
elbitapmoc dna nevownon retseylop elbats erusserp a sI
with all regular types of resins, including Polyester,
Vinylester, Phenolic and Epoxy
,noisufnI gnidulcni ,sessecorp dluom desolc rof elbatius sI
RTM Light, RTM Heavy
Applications Lantor Soric
XF
Marine: hulls, decks and structures of boats and yachts
,sreliart ,srac fo slenap dna strap :noitatropsnarT
trucks and RV s
liar thgil ,sniart fo roiretxe dna roiretni :tisnart ssaM
and buses
Leisure: kayaks, surfboards, pools and tubs
Industrial: cladding panels, fans, containers and tanks
Wind Energy: nacelle and spinners
Dimensional data
Typical mechanical properties of Lantor Soric
XF*
impregnated with unsaturated polyester resin
Properties XF 1.5XF 2XF 3XF 4XF 5XF 6XF 10
Thickness mm1,52,03,04,05,06,010,0
Roll length m10080 50 40 30 25 15
Roll width m1,271,271,271,271,271,271,27
Thickness loss at 0,8 bar %<10<10<10<10<10<10<10
Max processing temp. C170170170170170170170
Resin uptake kg/m
2
1,01,01,41,92,42,85,4
Dry weight g/m
2
100135180250320345625
Density impregnated kg/m
3
650600600600600600600
Mechanical properties unitvaluetest met hod
Flexural strength MPa 8
ASTM D790
Flexural modulus MPa 800 ASTM D790
Tensile strength across layers MPa 4 ASTM C297
Compression strength: 10% strain MPa 8 ISO 844
Shear strength MPa 3,5 ASTM C273-61
Shear modulus MPa 35 ASTM C273-61
*Soric
XF 3
The information contained in this document has been compiled in good faith by Lantor BV,
but nevertheless no representation or warranty is given as to the accuracy or
completeness of the (technical) information provided herein. Lantor BV can not be held
liable of
any damages arising from any (printing) errors or omissions in this information.
Lantor BV reserves the right to make changes with respect to the information provided
at any time without further notice.
Combines maximum weight
reduction with optimal
ow behaviour in structural
core applications
Interlaminar ow medium
tnorf wo elbats dna dellortnoC
COMPOSITES
committed to the core
www.lantor.com
V2.2/02.2020
by | Sep 27, 2025
TECHNICAL DATASHEET DRAFT
SAP No. 20011291 Article Description Y-E-687g/m -635mm
Textile Structure 7010148 SAERTEX
ARTICLE CONSTRUCTION (in accordance with EN 13473-1)
Layer Construction Areal weight Tolerance Material
3 0 307 g/m +/- 5,0 % E-glass 600 TEX
2 45 184 g/m +/- 5,0 % E-glass 300 TEX
1 -45 184 g/m +/- 5,0 % E-glass 300 TEX
Stitching 12 g/m +/- 3 g/m PES [Polyester] 76 dtex
Fiber input can be determined individually
FURTHER CHARACTERISTICS
Gauge 10,0 Stitching pattern tricot-warp Width (nominal) 635 mm
Stitch length 3,00 mm Total tolerance 5,3 % Total areal weight 687 g/m
Labelling (Standard) Every roll is equipped with a label in the core. A further label is located outside on
the foil or on the box.
Packaging (Standard) Every roll is wound on a cardboard core and wrapped in foil. Further packaging
options can be determined individually.
Storage Keep in original packaging. Store in a dry environment. Avoid direct sunlight.
(recommendation) Fabrics to be kept under processing conditions at least 24 hours
prior to use to avoid problems with humidity and electrostatic charge.
– Confidential Information –
SAERTEX USA, LLC. has been certified in accordance with ISO 9001:2015.
REINFORCING YOUR IDEAS
