by | Sep 27, 2025
F-115 REV 1 A/B Page 1 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
F-115 REV 1 A/B
15 SHORE A POLYURETHANE ELASTOMER
BJB s F-115 REV 1 is a soft (15 Shore A), stretchy, 1:1 mix ratio polyurethane elastomer designed for a variety of applications.
The addition of SC-22 Softener allows the user to lower hardness and increase elongation to produce extremely soft parts. F-115
REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment. For longer work times consider our M and L Series
of elastomers.
RoHS/REACH Compliant Easy to Pigment High Tensile & Tear Strength
Special Effects & Props Medical Training Models Mercury/Phthalate Free
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMP
CURE*
Hardness, Shore A ASTM D2240-04e1 15 5
Density (g/cc) ASTM D792-00 1.017
Cubic Inches per Pound N/A 27.62
Color/Appearance Visual Translucent Pale Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 650
Tensile Modulus (psi) ASTM D412-98a(2002)e1 100
Elongation (%) ASTM D412-98a(2002)e1 1,200
Tear Strength (pli) ASTM D624-00e1 70
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.001
Dielectric Constant, 1 MHz ASTM D150-87 5.334
Dissipation Factor, 1 MHz ASTM D150-87 0.0452
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume (cartridge dispense friendly) 100 99
Specific Gravity @ 77 F (25 C) 0.999 1.01
Color Pale Yellow Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 1,150 1,100
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,200
Work Time, 100g mass @ 77 F (25 C) 9 10 minutes
Gel Time 16 17 minutes
Demold Time @ 77 F (25 C) 3 5 hours
Properties above are typical and not for specifications.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
F-115 REV 1 A/B Page 2 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). The cure may be inhibited if cast against a Tin Catalyzed Silicone RTV.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 2 lbs. 111
Gallon Kits 8 lbs. 8 lbs. 442
5-Gallon Kits 40 lbs. 40 lbs. 2,210
55-Gallon Drum Kits 440 lbs. 440 lbs. 24,306
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of
California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
F-115 REV 1 A/B Page 1 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
F-115 REV 1 A/B
15 SHORE A POLYURETHANE ELASTOMER
BJB s F-115 REV 1 is a soft (15 Shore A), stretchy, 1:1 mix ratio polyurethane elastomer designed for a variety of applications.
The addition of SC-22 Softener allows the user to lower hardness and increase elongation to produce extremely soft parts. F-115
REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment. For longer work times consider our M and L Series
of elastomers.
RoHS/REACH Compliant Easy to Pigment High Tensile & Tear Strength
Special Effects & Props Medical Training Models Mercury/Phthalate Free
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMP
CURE*
Hardness, Shore A ASTM D2240-04e1 15 5
Density (g/cc) ASTM D792-00 1.017
Cubic Inches per Pound N/A 27.62
Color/Appearance Visual Translucent Pale Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 650
Tensile Modulus (psi) ASTM D412-98a(2002)e1 100
Elongation (%) ASTM D412-98a(2002)e1 1,200
Tear Strength (pli) ASTM D624-00e1 70
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.001
Dielectric Constant, 1 MHz ASTM D150-87 5.334
Dissipation Factor, 1 MHz ASTM D150-87 0.0452
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume (cartridge dispense friendly) 100 99
Specific Gravity @ 77 F (25 C) 0.999 1.01
Color Pale Yellow Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 1,150 1,100
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,200
Work Time, 100g mass @ 77 F (25 C) 9 10 minutes
Gel Time 16 17 minutes
Demold Time @ 77 F (25 C) 3 5 hours
Properties above are typical and not for specifications.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
F-115 REV 1 A/B Page 2 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). The cure may be inhibited if cast against a Tin Catalyzed Silicone RTV.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 2 lbs. 111
Gallon Kits 8 lbs. 8 lbs. 442
5-Gallon Kits 40 lbs. 40 lbs. 2,210
55-Gallon Drum Kits 440 lbs. 440 lbs. 24,306
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of
California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
F-115 REV 1 A/B Page 1 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
F-115 REV 1 A/B
15 SHORE A POLYURETHANE ELASTOMER
BJB s F-115 REV 1 is a soft (15 Shore A), stretchy, 1:1 mix ratio polyurethane elastomer designed for a variety of applications.
The addition of SC-22 Softener allows the user to lower hardness and increase elongation to produce extremely soft parts. F-115
REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment. For longer work times consider our M and L Series
of elastomers.
RoHS/REACH Compliant Easy to Pigment High Tensile & Tear Strength
Special Effects & Props Medical Training Models Mercury/Phthalate Free
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMP
CURE*
Hardness, Shore A ASTM D2240-04e1 15 5
Density (g/cc) ASTM D792-00 1.017
Cubic Inches per Pound N/A 27.62
Color/Appearance Visual Translucent Pale Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 650
Tensile Modulus (psi) ASTM D412-98a(2002)e1 100
Elongation (%) ASTM D412-98a(2002)e1 1,200
Tear Strength (pli) ASTM D624-00e1 70
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.001
Dielectric Constant, 1 MHz ASTM D150-87 5.334
Dissipation Factor, 1 MHz ASTM D150-87 0.0452
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume (cartridge dispense friendly) 100 99
Specific Gravity @ 77 F (25 C) 0.999 1.01
Color Pale Yellow Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 1,150 1,100
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 1,200
Work Time, 100g mass @ 77 F (25 C) 9 10 minutes
Gel Time 16 17 minutes
Demold Time @ 77 F (25 C) 3 5 hours
Properties above are typical and not for specifications.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
F-115 REV 1 A/B Page 2 of 2 Date: 12/03/2020
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). The cure may be inhibited if cast against a Tin Catalyzed Silicone RTV.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 2 lbs. 111
Gallon Kits 8 lbs. 8 lbs. 442
5-Gallon Kits 40 lbs. 40 lbs. 2,210
55-Gallon Drum Kits 440 lbs. 440 lbs. 24,306
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of
California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
F-105 REV 1 A/B Page 1 of 2 Date: 07/18/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
F-105 REV 1 A/B
5 SHORE A POLYURETHANE ELASTOMER
BJB s F-105 REV 1 is a soft (5 Shore A), stretchy, 1:1 mix ratio polyurethane elastomer designed for a variety of applications.
The addition of SC-22 Softener allows the user to lower hardness and increase elongation to produce extremely soft parts. F-105
REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment.
RoHS/REACH Compliant Easy to Pigment High Tensile & Tear Strength
Special Effects & Props Medical Training Models Mercury/Phthalate Free
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMP
CURE*
Hardness, Shore A ASTM D2240-04e1 5 4
Hardness, Shore OO ASTM D2240-04e1 50 5
Density (g/cc) ASTM D792-00 0.997
Cubic Inches per Pound N/A 28
Color/Appearance Visual Translucent Pale Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 450
Tensile Modulus (psi) ASTM D412-98a(2002)e1 400
Elongation (%) ASTM D412-98a(2002)e1 900
Tear Strength (pli) ASTM D624-00e1 50
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.001
Dielectric Constant, 1 MHz ASTM D150-87 4.779
Dissipation Factor, 1 MHz ASTM D150-87 0.0328
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume (cartridge dispense friendly) 100 99
Specific Gravity @ 77 F (25 C) 0.985 0.996
Color Pale Yellow Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 440 550
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 670
Work Time, 100g mass @ 77 F (25 C) 5 6 minutes
Gel Time 8 9 minutes
Demold Time @ 77 F (25 C) 2 3 hours
Properties above are typical and not for specifications.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
F-105 REV 1 A/B Page 2 of 2 Date: 07/18/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
IMPORTANT MIXING DIRECTION:
It is important to remix the A and B components thoroughly prior to each use.
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). The cure may be inhibited if cast against a Tin Catalyzed Silicone RTV.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 2 lbs. 112
Gallon Kits 8 lbs. 8 lbs. 448
5-Gallon Kits 40 lbs. 40 lbs. 2,240
55-Gallon Drum Kits 440 lbs. 440 lbs. 24,640
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of
California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
by | Sep 27, 2025
F-105 REV 1 A/B Page 1 of 2 Date: 07/18/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
www.bjbenterprises.com
F-105 REV 1 A/B
5 SHORE A POLYURETHANE ELASTOMER
BJB s F-105 REV 1 is a soft (5 Shore A), stretchy, 1:1 mix ratio polyurethane elastomer designed for a variety of applications.
The addition of SC-22 Softener allows the user to lower hardness and increase elongation to produce extremely soft parts. F-105
REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment.
RoHS/REACH Compliant Easy to Pigment High Tensile & Tear Strength
Special Effects & Props Medical Training Models Mercury/Phthalate Free
PHYSICAL PROPERTIES TEST METHOD
ELEVATED TEMP
CURE*
Hardness, Shore A ASTM D2240-04e1 5 4
Hardness, Shore OO ASTM D2240-04e1 50 5
Density (g/cc) ASTM D792-00 0.997
Cubic Inches per Pound N/A 28
Color/Appearance Visual Translucent Pale Amber
Tensile Strength (psi) ASTM D412-98a(2002)e1 450
Tensile Modulus (psi) ASTM D412-98a(2002)e1 400
Elongation (%) ASTM D412-98a(2002)e1 900
Tear Strength (pli) ASTM D624-00e1 50
Shrinkage (in/in) linear ASTM D2566 @ 1 depth 0.001
Dielectric Constant, 1 MHz ASTM D150-87 4.779
Dissipation Factor, 1 MHz ASTM D150-87 0.0328
*Note: Reported physical properties are based on test specimens cured 1-3 hours at room temperature then 16 hours at 160 F (71 C).
Shrink test specimens are cured for 24 hours at room temperature and then 16 hours at 160 F (71 C).
HANDLING PROPERTIES Part A Part B
Mix Ratio by weight 100 100
Mix Ratio by volume (cartridge dispense friendly) 100 99
Specific Gravity @ 77 F (25 C) 0.985 0.996
Color Pale Yellow Pale Amber
Viscosity (cps) @ 77 F (25 C) Brookfield 440 550
Mixed Viscosity (cps) @ 77 F (25 C) Brookfield 670
Work Time, 100g mass @ 77 F (25 C) 5 6 minutes
Gel Time 8 9 minutes
Demold Time @ 77 F (25 C) 2 3 hours
Properties above are typical and not for specifications.
SHORE A POLYURETHANES
Dedicated to QUALITY, SERVICE, SAFETY, and INNOVATION
An ISO-9001 Certified company
F-105 REV 1 A/B Page 2 of 2 Date: 07/18/2022
For more information call BJB Enterprises, Inc. (714) 734-8450 Fax (714) 734-8929
NON-WARRANTY “Except for a warranty that materials substantially comply with the data presented in Manufacturer’s latest bulletin describing the product (the basis for this substantial
compliance is to be determined by the standard quality control tests generally performed by Manufacturer), all materials are sold “AS IS” and without any warranty express or implied as
to merchantability, fitness for a particular purpose, patent, trademark or copyright infringement, or as to any other matter. In no event shall Manufacturer’s liability for damages exceed
Manufacturer’s sale price of the particular quantity with respect to which damages are claimed.”
IMPORTANT MIXING DIRECTION:
It is important to remix the A and B components thoroughly prior to each use.
CURE SCHEDULE/HEAT CURING:
Most of the physical properties can be achieved in 5-7 days at 77 F (25 C). You may use your own post-cure schedule but the physical
properties may vary from BJB s cure schedule of 1-3 hours at 77 F (25 C) followed by 16 hours at 160 F (71 C). Do not exceed
curing temperature of 200 F (93 C). The cure may be inhibited if cast against a Tin Catalyzed Silicone RTV.
ACCESSORIES:
BJB offers silicone RTV mold making materials along with a wide range of accessory items. These include de-airing agents, pigments,
mold releases, and Jiffy
Mixers. Visit BJB s website at www.bjbenterprises.com or consult a BJB representative for more
information.
COLOR VARIATIONS:
The color of the base material may vary slightly from batch to batch due to raw ingredients. Color variations will not affect the
cured physical properties. Exposing the material to various conditions such as heat and UV light will alter the color of the cured
system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter
pigments.
UV RESISTANCE:
This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that
will help slow down the effects of UV degradation and color change. The level of effectiveness varies from product to product.
STORAGE:
Store at ambient temperatures, 65-80 F (18-27 C). Unopened containers will have a shelf life of 6 months from date of shipment when
properly stored at recommended temperatures. Purge opened containers with dry nitrogen before re-sealing.
PACKAGING Part A Part B Cubic Inches per Kit
Quart Kits 2 lbs. 2 lbs. 112
Gallon Kits 8 lbs. 8 lbs. 448
5-Gallon Kits 40 lbs. 40 lbs. 2,240
55-Gallon Drum Kits 440 lbs. 440 lbs. 24,640
SAFETY PRECAUTIONS:
Use in a well-ventilated area. Avoid contact with skin using protective gloves and protective clothing. Repeat or prolonged contact
on the skin may cause an allergic reaction. Eye protection is extremely important. Always use approved safety glasses or goggles
when handling this product.
IF CONTACT OCCURS:
Skin: Immediately wash with soap and water. Remove contaminated clothing and launder before reuse. It is not recommended
to remove resin from skin with solvents. Solvents only increase contact and dry skin. Seek qualified medical attention if
allergic reactions occur.
Eyes: Immediately flush with water for at least 15 minutes. Call a physician.
Ingestion: If swallowed, call a physician immediately. Remove stomach contents by gastric suction or induce vomiting only as
directed by medical personnel. Never give anything by mouth to an unconscious person.
Refer to the Material Safety Data Sheet before using this product.
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of
California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Handling Guide
by | Sep 27, 2025
Description
InsulFoam I is an engineered insulation consisting of a superior
closed cell, lightweight and resilient expanded polystyrene (EPS).
InsulFoam I meets or exceeds the requirements of ASTM C578,
Type I, Standard Speci cation for Rigid, Cellular Polystyrene
Thermal Insulation. InsulFoam I has a nominal density of 1.0 lb/ft
3
.
In addition, InsulFoam I offers a long term, stable R Value and has
excellent dimensional stability, compressive strength and water
resistance properties. Insulfoam Insulation can contribute toward
environmental credentialing including LEED
credits.
Uses
InsulFoam I Insulation is successfully used in numerous commercial, industrial and residential applications. The following are examples of the many applications:
Interior & Exterior Wall Insulation
EIFS & Stucco Insulation
Single Ply Roof Insulation
Roof Recover Board
Continuous Below Grade Insulation
Foundation, Perimeter, Slab & Basement Insulation
Retaining Walls
Drainage Board
Waterproo ng Protection Board
Freezers & Cold Storage
Advantages
Environmentally Friendly. It does not contain any blowing
agents, may contain recycled material, and is 100% recyclable
if ever removed or replaced.
Stable R Value. The product s thermal properties will remain
stable over its entire service life. There is no thermal drift,
so the product is eligible for an Insulfoam 20 year thermal
performance warranty.
Proven Performance. EPS has been manufactured using
the same chemistry since the mid 1950s, providing proven
performance.
Water Resistance. InsulFoam I does not readily absorb moisture
from the environment.
Code Approvals. Insulfoam insulations are recognized by the
International Code Council Evaluation Service (ICC ES), and
have numerous Underwriters Laboratory and Factory Mutual
Approvals. Please contact your local Insulfoam representative
for details.
Sizes
InsulFoam I is available in 4′ x 4′ and 4′ x 8′ standard sizes with thicknesses from ” to 40″, and is readily available in custom lengths and widths with little to no impact on lead time. It is also available in tapered panels.
INSULATION ENGINEERED TO MAKE A DIFFERENCE.
Nationwide Manufacturing Toll Free: (800) 248 5995 www.Insulfoam.com
TDS# 19008 08/18
TYPE I 10 PSI
HIGH PERFORMANCE INSULATION
Typical Tested Physical Properties*
Property Test Method Value
Density (nom. pcf) ASTM C303 1.00
C-Value (Conductance) – per inch
BTU/(hrft
2
F)
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
0.230
0.240
0.260
R-Value (Resistance) – per inch
(hrft
2
F)/BTU
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
4.35
4.17
3.85
Compressive Strength
(psi, 10% deformation)
ASTM D1621 10
Flame Spread ASTM E84 < 20
Smoke Developed ASTM E84 150 300
*Properties are based on data provided by resin manufacturers, independent test agencies and Insulfoam.
by | Sep 27, 2025
Description
InsulFoam I is an engineered insulation consisting of a superior
closed cell, lightweight and resilient expanded polystyrene (EPS).
InsulFoam I meets or exceeds the requirements of ASTM C578,
Type I, Standard Speci cation for Rigid, Cellular Polystyrene
Thermal Insulation. InsulFoam I has a nominal density of 1.0 lb/ft
3
.
In addition, InsulFoam I offers a long term, stable R Value and has
excellent dimensional stability, compressive strength and water
resistance properties. Insulfoam Insulation can contribute toward
environmental credentialing including LEED
credits.
Uses
InsulFoam I Insulation is successfully used in numerous commercial, industrial and residential applications. The following are examples of the many applications:
Interior & Exterior Wall Insulation
EIFS & Stucco Insulation
Single Ply Roof Insulation
Roof Recover Board
Continuous Below Grade Insulation
Foundation, Perimeter, Slab & Basement Insulation
Retaining Walls
Drainage Board
Waterproo ng Protection Board
Freezers & Cold Storage
Advantages
Environmentally Friendly. It does not contain any blowing
agents, may contain recycled material, and is 100% recyclable
if ever removed or replaced.
Stable R Value. The product s thermal properties will remain
stable over its entire service life. There is no thermal drift,
so the product is eligible for an Insulfoam 20 year thermal
performance warranty.
Proven Performance. EPS has been manufactured using
the same chemistry since the mid 1950s, providing proven
performance.
Water Resistance. InsulFoam I does not readily absorb moisture
from the environment.
Code Approvals. Insulfoam insulations are recognized by the
International Code Council Evaluation Service (ICC ES), and
have numerous Underwriters Laboratory and Factory Mutual
Approvals. Please contact your local Insulfoam representative
for details.
Sizes
InsulFoam I is available in 4′ x 4′ and 4′ x 8′ standard sizes with thicknesses from ” to 40″, and is readily available in custom lengths and widths with little to no impact on lead time. It is also available in tapered panels.
INSULATION ENGINEERED TO MAKE A DIFFERENCE.
Nationwide Manufacturing Toll Free: (800) 248 5995 www.Insulfoam.com
TDS# 19008 08/18
TYPE I 10 PSI
HIGH PERFORMANCE INSULATION
Typical Tested Physical Properties*
Property Test Method Value
Density (nom. pcf) ASTM C303 1.00
C-Value (Conductance) – per inch
BTU/(hrft
2
F)
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
0.230
0.240
0.260
R-Value (Resistance) – per inch
(hrft
2
F)/BTU
@ 25 F
@ 40 F
@ 75 F
ASTM C518
or
ASTM C177
4.35
4.17
3.85
Compressive Strength
(psi, 10% deformation)
ASTM D1621 10
Flame Spread ASTM E84 < 20
Smoke Developed ASTM E84 150 300
*Properties are based on data provided by resin manufacturers, independent test agencies and Insulfoam.
by | Sep 27, 2025
Product Description
ELFOAM P400 is a 4.0 lb/ft
3
(64 kg/m
3
), rigid, unfaced,
closed cell polyisocyanurate foam supplied as blocks,
sheets and fabricated shapes for a variety of insulation, core
material and carving applications. Polyisocyanurate foam
(polyiso) is similar to polyurethane foam but offers greater
dimensional stability over a wider service temperature range.
ELFOAM P400 is manufactured in bunstock form 24 (61cm)
thick; 48 (122cm) wide; and 96 (244cm) long. Cut sheets
are offered in thicknesses from 1/8 to 8 (.32cm to 20cm) in
1/32 (.08cm) increments. Custom sizes and fabricated parts
up to 24 (66cm) thick, 48 (122cm) wide and 192 (488cm)
in length are available for customers wanting to eliminate
in-house cutting, handling, and scrap disposal. Contact
the Indianapolis Sales Office for additional information.
Design Considerations
ELFOAM P400 is designed for use in environments
where temperatures range from -297 to +300 F (-183 to
+149 C). However, in non-laminated applications where
temperatures exceed 140 F (60 C) and/or have relative
humidity above 70% as well as in processes where frequent
and severe thermal cycling occurs, allowances for foam
dimensional changes may need to be incorporated into
engineering design. Regardless of operating conditions, a
qualified design engineer should review all foam applications.
ELFOAM, like all cellular plastics, will degrade with
prolonged exposure to sunlight. To prevent such degradation,
foam materials should be covered. Other barriers
to protect exposed foam surfaces from the elements and to meet
applicable fire and safety regulations may also be required.
Environmental Data
ELFOAM P300 is specifically formulated to provide
excellent physical properties without the use of
chlorofluorocarbon (CFC) or hydrochlorofluorocarbon
(HCFC) blowing agents. In compliance with the
Montreal Protocol and the Clean Air Act, ELFOAM P400 is
manufactured with hydrocarbon blowing agents which
have no ozone depletion or global warming potential.
Applications
Typical products incorporating ELFOAM P400 include:
Laminated wall and roof panels
Truck/Trailer bodies, shipping containers and railcars
FRP panels, tanks and shelters
Pultrusion and infusion processes
Pipe, tank and vessel insulation
Plugs, patterns and carved products
Note that application testing is often required to determine
suitability of the foam for a specific application. Potential
users should perform pertinent testing to determine the
suitability of the product for the intended application.
Final determination of fitness of the product for any
particular use is the responsibility of the buyer.
Compliances and Approvals
ELFOAM P400 meets industry standards, specifications,
regulations and technical guidelines put forth by numerous
commercial, federal and military entities including ASTM
International, Underwriters Laboratories, FM Global
and the US Department of Transportation. Contact the
Indianapolis Sales Office for additional information.
Safety
All persons who work with ELFOAM products should
follow proper handling procedures. The ELFOAM
Safety Data Sheet (SDS) contains information about
proper handling, storage and use of this material. A copy
of this document may be downloaded at elliottfoam.com
or obtained by calling the Indianapolis Sales Office.
Availability
All ELFOAM product support, samples, pricing and
orders are coordinated by the Indianapolis Sales Office.
Please call (800) 545-1213 for details. ELFOAM product
data sheets may also be downloaded at elliottfoam.com.
Elliott Company of Indianapolis Inc. (Elliott) believes the information and
recommendations herein to be accurate and reliable as of date of
publication. However, since any assistance furnished by Elliott with reference to the
proper use and disposal of its products is provided without charge and since use
conditions are not within its control, Elliott assumes no obligation or liability for such
assistance. No warranty, expressed or implied, regarding accuracy or
correctness is given and Elliott expressly disclaims any implied warranties including
warranties of merchantability or fitness for a particular use. Since use conditions
and government regulations may vary from one location to another and may change
over time, it is the buyer s responsibility to determine whether Elliott products
are appropriate for buyer s use, and to assure the buyer s workplace and disposal
procedures are in compliance with law, regulations, ordinances, and other government
enactments applicable in the jurisdiction having authority over the buyer s operations.
ELFOAM
P400
Polyisocyanurate Foam
Manufacturer/Fabricator of ELFOAM Polyiso & Polyurethane Products
May 2016
Family Owned since 1957
Density D1622 4.0 lb/ft
3
64.0 kg/m
3
Thermal Conductivity, k-factor
4
C518
Initial at 75 F (24 C) 0.170 (BTU in)/(hr ft
2
F) 0.025 W/(m C)
Aged 10 days at 158 F (70 C) 0.185 (BTU in)/(hr ft
2
F) 0.027 W/(m C)
Thermal Conductivity, R-value per inch
4
C518
Initial at 75 F (24 C) 5.9 (hr ft
2
F)/BTU 1.04 (m
2
C)/W
Aged 10 days at 158 F (70 C) 5.4 (hr ft
2
F)/BTU 0.96 (m
2
C)/W
Compressive Strength / Modulus D1621
Parallel to Rise 85 / 2,100 lb/in
2
585 / 14,469 kPa
Perpendicular to Rise
5
62 / 1,400 lb/in
2
427 / 9,646 kPa
Shear Strength / Modulus C273
Parallel to Rise 55 / 850 lb/in
2
379 / 5,856 kPa
Perpendicular to Rise
5
50 / 750 lb/in
2
344 / 5,167 kPa
Tensile Strength / Modulus
D1623
Parallel to Rise 80 / 2,700 lb/in
2
551 / 18,603 kPa
Perpendicular to Rise
5
59 / 1,560 lb/in
2
406 / 10,748 kPa
Flexural Strength / Modulus C203
Parallel to Rise 119 / 2,872 lb/in
2
820 / 19,788 kPa
Perpendicular to Rise
5
80 / 1,809 lb/in
2
551 / 12,464 kPa
Closed Cell Content (by volume) D6226 95%
Water Absorption (by volume) C272 0.5%
Water Vapor Transmission E96 2.0 perms in 2.9 ng/Pa s m
Dimensional Stability
6
(length / volume change) D2126
+158 F(70 C), 97 3% relativity humidity, 14 days +1.1 / +2.3%
-40 F(-40 C), ambient relativity humidity, 14 days +0.1 / -0.1%
+212 F(100 C), ambient relative humidity, 14 days +0.2 / +0.0%
Coefficient of Linear Thermal Expansion E228
0 to +250 F (-17 to +121 C) 35 x 10
-6
in/in F 63 x 10
-6
mm/mm C
Hot Surface Performance at 300 F (149 C) C411 Pass
Surface Burning Characteristics
7
E84
Flame Spread, thicknesses up to 6 in (15.2 cm) 25
Smoke Developed, thicknesses up to 6 in (15.2 cm) <450
Polyisocyanurate Insulation Requirements C591 Grade 2, Type V compliant
Product Description
ELFOAM P400 is a rigid, closed cell, preformed, unfaced, polyisocyanurate foam material (polyiso). This CFC and HCFC
free product provides outstanding physical properties in applications having a service temperature between 297 and +300 F
ELFOAM
P400 Polyisocyanurate Foam
ASTM Typical Values
3
Physical Properties
1, 2
Method English Metric
May 2016
(-183 and +149 C). ELFOAM P200 is tan in color and is available in blocks, sheets and fabricated shapes.
1 Data shown are typical values obtained from representative production samples. For specific property ranges, consult the Indianapolis Sales Office.
2 All properties measured at 73 4 F (23 2 C) unless otherwise indicated.
3 To be used only as a guide for design engineering purposes. Potential user is responsible for performing pertinent tests required to determine product suitability for the intended application.
4 k-factors and R-values vary with age and use conditions. Contact Indianapolis Sales Office for values at other mean temperatures.
5 Represents the lowest typical value across all axes related to Perpendicular to Rise performance. Contact the Indianapolis Sales Office for additional information.
6 Frequent and severe thermal cycling can produce dimensional changes significantly greater than those stated here. Special design consideration must be made in applications that cycle frequently.
7 Published data is not intended to reflect hazards represented by this or any other material under actual fire conditions. This material is combustible when exposed to large fire sources.
For more information, contact the Indianapolis Sales Office.
NOTE: Because use conditions and applicable laws may differ from one location to another and may change with time, Buyer is responsible for determining whether the product and information in this
document are appropriate for Buyer's use and for ensuring that Buyer s related products, workplace and disposal practices are in compliance with applicable laws and other government enactments.
Elliott Company of Indianapolis, Inc. assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
For more information or product samples call
800-545-1213
9200 Zionsville Road Indianapolis, Indiana 46268 Phone: (317) 291-1213 Fax: (317) 291-1219
or visit
elliottfoam.com
Family Owned since 1957
by | Sep 27, 2025
Product Description
ELFOAM P200 is a 2.0 lb/ft
3
(32 kg/m
3
), rigid, unfaced,
closed cell polyisocyanurate foam supplied as blocks,
sheets and fabricated shapes for a variety of insulation, core
material and carving applications. Polyisocyanurate foam
(polyiso) is similar to polyurethane foam but offers greater
dimensional stability over a wider service temperature range.
ELFOAM P200 is manufactured in bunstock form 26 (66cm)
thick; 48 (122cm) wide; and 72 , 96 , 108 , 120 , and
144 (183cm, 244cm, 274cm, 305cm, and 396cm) long.
Cut sheets are offered in thicknesses from 1/8 to 12 (.32cm
to 30cm) in 1/32 (.08cm) increments. Custom sizes and
fabricated parts up to 26 (66cm) thick, 48 (122cm) wide and
192 (488cm) in length are available for customers wanting
to eliminate in-house cutting, handling, and scrap disposal.
Contact the Indianapolis Sales Office for additional information.
Design Considerations
ELFOAM P200 is designed for use in environments where
temperatures range from -297 to +300 F (-183 to +149 C).
However, in non-laminated applications where temperatures
exceed 140 F (60 C) and/or have relative humidity above 70%
as well as in processes where frequent and severe thermal
cycling occurs, allowances for foam dimensional
changes may need to be incorporated into engineering
design. Regardless of operating conditions, a qualified
design engineer should review all foam applications.
ELFOAM, like all cellular plastics, will degrade with
prolonged exposure to sunlight. To prevent such degradation,
foam materials should be covered. Other barriers to protect
exposed foam surfaces from the elements and to meet
applicable fire and safety regulations may also be required.
Environmental Data
ELFOAM P200 is specifically formulated to provide
excellent physical properties without the use of
chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC)
blowing agents. In compliance with the Montreal
Protocol and the Clean Air Act, ELFOAM P200 is
manufactured with hydrocarbon blowing agents which
have no ozone depletion or global warming potential.
Applications
Typical products incorporating ELFOAM P200 include:
Refrigerated food service equipment
Laminated wall and roof panels
Commercial and industrial doors
FRP panels, tanks and shelters
Truck/Trailer bodies, shipping containers and railcars
Pipe, tank and vessel insulation
Plugs, patterns and carved products
Note that application testing is often required to
determine suitability of the foam for a specific
application. Potential users should perform pertinent
testing to determine the suitability of the product for the
intended application. Final determination of fitness of the
product for any particular use is the responsibility of the buyer.
Compliances and Approvals
EELFOAM P200 meets industry standards, specifications,
regulations and technical guidelines put forth by numerous
commercial, federal and military entities including ASTM
International, Underwriters Laboratories, and the US
Departments of Transportation and Defense. Contact
the Indianapolis Sales Office for additional information.
Safety
All persons who work with ELFOAM products should
follow proper handling procedures. The ELFOAM
Safety Data Sheet (SDS) contains information about
proper handling, storage and use of this material. A copy
of this document may be downloaded at elliottfoam.com
or obtained by calling the Indianapolis Sales Office.
Availability
All ELFOAM product support, samples, pricing and
orders are coordinated by the Indianapolis Sales Office.
Please call (800) 545-1213 for details. ELFOAM product
data sheets may also be downloaded at elliottfoam.com.
Elliott Company of Indianapolis Inc. (Elliott) believes the information and
recommendations herein to be accurate and reliable as of date of publication.
However, since any assistance furnished by Elliott with reference to the
proper use and disposal of its products is provided without charge and since use
conditions are not within its control, Elliott assumes no obligation or
liability for such assistance. No warranty, expressed or implied, regarding accuracy or
correctness is given and Elliott expressly disclaims any implied warranties including
warranties of merchantability or fitness for a particular use. Since use condi-
tions and government regulations may vary from one location to another and may
change over time, it is the buyer s responsibility to determine whether Elliott prod-
ucts are appropriate for buyer s use, and to assure the buyer s workplace and disposal
procedures are in compliance with law, regulations, ordinances, and other government
enactments applicable in the jurisdiction having authority over the buyer s operations.
ELFOAM
P200
Polyisocyanurate Foam
Manufacturer/Fabricator of ELFOAM Polyiso & Polyurethane Products
September 2016
Family Owned since 1957
Density D1622 2.0 lb/ft
3
31.9 kg/m
3
Thermal Conductivity, k-factor
4
C518
Initial at 75 F (24 C) 0.165 (BTU in)/(hr ft
2
F) 0.024 W/(m C)
Aged 10 days at 158 F (70 C) 0.185 (BTU in)/(hr ft
2
F) 0.027 W/(m C)
Thermal Conductivity, R-value per inch
4
C518
Initial at 75 F (24 C) 6.0 (hr ft
2
F)/BTU 1.06 (m
2
C)/W
Aged 10 days at 158 F (70 C) 5.4 (hr ft
2
F)/BTU 0.96 (m
2
C)/W
Compressive Strength / Modulus D1621
Parallel to Rise 27 / 700 lb/in
2
186 / 4,823 kPa
Perpendicular to Rise
5
18 / 334 lb/in
2
124 / 2,301 kPa
Shear Strength / Modulus C273
Parallel to Rise 25 / 300 lb/in
2
172 / 2,067 kPa
Perpendicular to Rise
5
18 / 220 lb/in
2
124 / 1,515 kPa
Tensile Strength / Modulus
D1623
Parallel to Rise 36 / 1,200 lb/in
2
248 / 8,268 kPa
Perpendicular to Rise
5
26 / 463 lb/in
2
179 / 3,190 kPa
Flexural Strength / Modulus C203
Parallel to Rise 40 / 760 lb/in
2
275 / 5,236 kPa
Perpendicular to Rise
5
28 / 513 lb/in
2
193 / 3,535 kPa
Closed Cell Content (by volume) D6226 95%
Water Absorption (by volume) C272 1.27%
Water Vapor Transmission E96 4.0 perms in 5.8 ng/Pa s m
Dimensional Stability
6
(length / volume change) D2126
+158 F(70 C), 97 3% relativity humidity, 14 days +0.6 / +2.6%
-40 F(-40 C), ambient relativity humidity, 14 days -0.5 / -0.2%
+212 F(100 C), ambient relative humidity, 14 days +0.0 / +0.8%
Coefficient of Linear Thermal Expansion E228
0 to +250 F (-17 to +121 C) 40 x 10
-6
in/in F 72 x 10
-6
mm/mm C
Hot Surface Performance at 300 F (149 C) C411 Pass
Surface Burning Characteristics
7
E84
Flame Spread, thicknesses up to 6 in (15.2 cm) 25
Smoke Developed, thicknesses up to 6 in (15.2 cm) <250
Polyisocyanurate Insulation Requirements C591 Grade 2, Type IV compliant
Product Description
ELFOAM P200 is a rigid, closed cell, preformed, unfaced, polyisocyanurate foam material (polyiso). This CFC and HCFC
free product provides outstanding physical properties in applications having a service temperature between 297 and +300 F
ELFOAM
P200 Polyisocyanurate Foam
ASTM Typical Values
3
Physical Properties
1, 2
Method English Metric
September 2016
(-183 and +149 C). ELFOAM P200 is tan in color and is available in blocks, sheets and fabricated shapes.
1 Data shown are typical values obtained from representative production samples. For specific property ranges, consult the Indianapolis Sales Office.
2 All properties measured at 73 4 F (23 2 C) unless otherwise indicated.
3 To be used only as a guide for design engineering purposes. Potential user is responsible for performing pertinent tests required to determine product suitability for the intended application.
4 k-factors and R-values vary with age and use conditions. Contact Indianapolis Sales Office for values at other mean temperatures.
5 Represents the lowest typical value across all axes related to Perpendicular to Rise performance. Contact the Indianapolis Sales Office for additional information.
6 Frequent and severe thermal cycling can produce dimensional changes significantly greater than those stated here. Special design consideration must be made in applications that cycle frequently.
7 Published data is not intended to reflect hazards represented by this or any other material under actual fire conditions. This material is combustible when exposed to large fire sources.
For more information, contact the Indianapolis Sales Office.
NOTE: Because use conditions and applicable laws may differ from one location to another and may change with time, Buyer is responsible for determining whether the product and information in this
document are appropriate for Buyer's use and for ensuring that Buyer s related products, workplace and disposal practices are in compliance with applicable laws and other government enactments.
Elliott Company of Indianapolis, Inc. assumes no obligation or liability for the information in this document. NO WARRANTIES ARE GIVEN; ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ARE EXPRESSLY EXCLUDED.
For more information or product samples call
800-545-1213
9200 Zionsville Road Indianapolis, Indiana 46268 Phone: (317) 291-1213 Fax: (317) 291-1219
or visit
elliottfoam.com
Family Owned since 1957
