by | Sep 27, 2025
KC-BX 1200-5
Fiber Type:Carbon/Aramid
Architecture:+45 /-45 Double Bias
Total Weight:11.92 oz/sq.yd / 404 g/sq.m
Roll Specifications Fiber Architecture Data
Roll Width: Roll Weight: Roll Length: Carbon -45 :3.12 oz/sq.yd / 106 g/sq.m
50 in. / 1270 mm 116 lbs / 53 kg 109 yd / 100 m Aramid -45 :2.84 oz/sq.yd / 96 g/sq.m
Aramid 45 :2.84 oz/sq.yd / 96 g/sq.m
Carbon 45 :3.12 oz/sq.yd / 106 g/sq.m
* Packaging: Box
**Total weight refers to reinforcement material only (does not include stitching weight).
REV: 7/30/2014
Vectorply Corporation
3500 Lakewood Drive Phenix City, AL 36867
tel. 334-291-7704 fax. 334-291-7743
Disclaimer:
The customer is solely responsible for determining the performance and fitness for a particular use of any product produced by customer utilizing
a reinforcement fabric or material produced or manufactured by Vectorply Corp. Specifications of reinforcements may change without notice.
by | Sep 27, 2025
HexForce
48193
Carbon Fabrics
Product Data
STYLE 48193 US System
Type of Yarns Warp Yarn: 12K Carbon, 33MSI
Fill Yarn: 12K Carbon, 33MSI
Fabric Weight, Dry 5.70 oz/yd
2
193 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 3/in
Fill Count: 3/in
Fabric Thickness 9.4 mil 0.24 mm
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
by | Sep 27, 2025
HexForce
4700
Fiber Glass Fabric
Product Data
STYLE 4700 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/0 EC9 134
Fill Yarn: ECG 75 1/2 EC9 68 x2
Fabric Weight, Dry 4.40 oz/yd
2
149 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 14/in 5.51/cm
Fill Count: 13/in 5.12/cm
Fabric Thickness 4.7 mil 0.12 mm
Breaking Strength Warp 240 lbf/in
Filling 240 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4533
Fiber Glass Fabric
Product Data
STYLE 4533 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/2 SC9 68 x2
Fill Yarn: SCG 75 1/2 SC9 68 x2
Fabric Weight, Dry 5.60 oz/yd
2
190 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.08/cm
Fill Count: 18/in 7.08/cm
Fabric Thickness 7.40 mil 0.19 mm
Breaking Strength Warp 300 lbf/in
Filling 300 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4533
Fiber Glass Fabric
Product Data
STYLE 4533 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/2 SC9 68 x2
Fill Yarn: SCG 75 1/2 SC9 68 x2
Fabric Weight, Dry 5.60 oz/yd
2
190 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.08/cm
Fill Count: 18/in 7.08/cm
Fabric Thickness 7.40 mil 0.19 mm
Breaking Strength Warp 300 lbf/in
Filling 300 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4522
Fiber Glass Fabric
Product Data
STYLE 4522 US System SI Units
Type of Yarns Warp Yarn: SCG 150 1/2 SC9 34 x2
Fill Yarn: SCG 150 1/2 SC9 34 x2
Fabric Weight, Dry 3.64 oz/yd
2
123 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.66/cm
Fabric Thickness 5.1 mil 0.13 mm
Breaking Strength Warp 125 lbf/in
Filling 125 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4450
Fiber Glass Fabric
Product Data
STYLE 4450 US System SI Units
Type of Yarns Warp Yarn: SCG 75 1/2 493 SC9 68 x2
Fill Yarn: SCG 75 1/2 493 SC9 68 x2
Fabric Weight, Dry 5.57 oz/yd
2
189 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.0/cm
Fill Count: 17/in 7.0/cm
Fabric Thickness 8.90 mil 0.23 mm
Breaking Strength Warp 450 lbf/in
Filling 435 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
4522
Fiber Glass Fabric
Product Data
STYLE 4522 US System SI Units
Type of Yarns Warp Yarn: SCG 150 1/2 SC9 34 x2
Fill Yarn: SCG 150 1/2 SC9 34 x2
Fabric Weight, Dry 3.64 oz/yd
2
123 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 24/in 9.40/cm
Fill Count: 22/in 8.66/cm
Fabric Thickness 5.1 mil 0.13 mm
Breaking Strength Warp 125 lbf/in
Filling 125 lbf/in
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been
generated from limited data. The values listed for weight, thickness and breaking strengths are typical greige
values, unless otherwise noted. Users should make their own assessment of the suitability of any product for
the purpose required. All sales are made subject to our standard terms of sales which include limitations on
liability and other important terms. The fabric style listed may not be available from inventory and minimum
order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
by | Sep 27, 2025
HexForce
TM
43193 F TCT
Carbon Fabric
Style 43193 F TCT US System
Type of Yarns Warp Yarn: Hexcel AS4 G 3K
Fill Yarn: Hexcel AS4 G 3K
Tracer Yarn: Kev. 195 Den.
Fabric Weight, Dry 5.70 oz/yd
2
193 g/m
2
Weave Style Plain
Construction
Nominal Construction Warp Count: 11.7/in 4.61/cm
Fill Count: 11.5/in 4.53/cm
Tracer Spacing: Warp-2 Fill-6
Important
All information is believed to be accurate but is given without acceptance of liability. All values have been generated
from limited data. The values listed for weight, thickness and breaking strengths are typical greige values, unless
otherwise noted. Users should make their own assessment of the suitability of any product for the purpose required.
All sales are made subject to our standard terms of sales which include limitations on liability and other important
terms. The fabric style listed may not be available from inventory and minimum order quantities may apply.
For More Information
Hexcel is a leading worldwide supplier of composite materials to aerospace and other demanding industries.
Our comprehensive product range includes:
Carbon Fiber
Reinforced Fabrics
Carbon, Glass, Aramid and Hybrid Prepregs
RTM Materials
HexTOOL
composite tooling material
Structural Film Adhesives
Honeycomb Cores
Engineered Core
1913 North King Street
Seguin, Texas 78155
Phone: 830-379-1580
Fax: 830-379-9544
Customer Service Toll Free: 1-866-601-5430
For European sales office numbers and a full address list, please go to:
http://www.hexcel.com/contact/salesoffices
Copyright 2014 Hexcel and Hexcel logo are registered trademarks of Hexcel Corporation, Stamford, Connecticut.
HexForce is a trademark of Hexcel Corporation, Stamford, Connecticut.
June 2014
