by | Sep 27, 2025
Product Data
3733
Fiber Glass Fabric
STYLE 3733 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/0 EC9 134
Fill Yarn: ECG 37 1/0 EC9 134
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.1/cm
Fill Count: 18/in 7.1/cm
Fabric Thickness 8.0 mils 0.20 mm
Yarn Breaking Strength Warp 250 lbf/in 219 daN/5cm
Filling 200 lbf/in 175 daN/5cm
Markets
Recreational
Applications
Low Pressure Composites
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been generated from
limited data. The values listed for weight, thickness, and breaking strengths are typical greige values, unless otherwise
noted. Users should make their own assessment of the suitability of any product for the purpose required. All sales are
made subject to our standard terms of sales which include limitations on liability and other important terms. The fabric
style listed may not be available from inventory, and minimum order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
2200 S. Murray Ave. 580 North Gilbert St. 3, Avenue Condorcet
Anderson, SC 29622 Fullerton, CA 92833 69608 Villeurbanne Cedex
USA USA France
Phone: 864-225-7028 Phone: 714-278-0850 Phone: 33 4 72 44 40 00
Fax: 864-260-6581 Fax: 714-526-2367 Fax: 33 4 78 89 72 30
by | Sep 27, 2025
Product Data
3733
Fiber Glass Fabric
STYLE 3733 US System SI Units
Type of Yarns Warp Yarn: ECG 37 1/0 EC9 134
Fill Yarn: ECG 37 1/0 EC9 134
Fabric Weight, Dry 5.80 oz/yd
2
197 g/m
2
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 18/in 7.1/cm
Fill Count: 18/in 7.1/cm
Fabric Thickness 8.0 mils 0.20 mm
Yarn Breaking Strength Warp 250 lbf/in 219 daN/5cm
Filling 200 lbf/in 175 daN/5cm
Markets
Recreational
Applications
Low Pressure Composites
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. All values have been generated from
limited data. The values listed for weight, thickness, and breaking strengths are typical greige values, unless otherwise
noted. Users should make their own assessment of the suitability of any product for the purpose required. All sales are
made subject to our standard terms of sales which include limitations on liability and other important terms. The fabric
style listed may not be available from inventory, and minimum order quantities may apply.
FOR FURTHER INFORMATION, PLEASE CONTACT US
2200 S. Murray Ave. 580 North Gilbert St. 3, Avenue Condorcet
Anderson, SC 29622 Fullerton, CA 92833 69608 Villeurbanne Cedex
USA USA France
Phone: 864-225-7028 Phone: 714-278-0850 Phone: 33 4 72 44 40 00
Fax: 864-260-6581 Fax: 714-526-2367 Fax: 33 4 78 89 72 30
by | Sep 27, 2025
352
Aramid and High Performance Fabrics
Product Data 12/3/07
STYLE 352
Type of Yarns Warp Yarn: Kevlar , K-49 1140 denier
Fill Yarn: Kevlar , K-49 1140 denier
Fabric Weight, Dry 5.1 (oz/sq. yd) +/- 4%
173 (g/sq. m) +/- 4%
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 17 +/- 1
Yarns/inch Fill Count: 17 +/- 1
Fabric Thickness 10.0 (mils) +/- 0.5 mil
0.25 (mm) +/- 0.05 mm
Breaking Strength, (Fabric) Warp 624 (lbf/in)
Filling 643 (lbf/in)
Markets Safety and Personal Protection
Applications Aerospace / Composite
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. Users should make their own
assessment of the suitability of any product for the purpose required. All sales are made subject to our standard terms
of sales which include limitations on liability and other important terms. The fabric style listed may not be available from
inventory, and minimum order quantities may apply. Kevlar is a Registered Trademark of DuPont.
2200 S. Murray Ave.
Anderson, S.C. 29624
Tel (864) 260-3286
Fax (864) 260-6581
by | Sep 27, 2025
352
Aramid and High Performance Fabrics
Product Data 12/3/07
STYLE 352
Type of Yarns Warp Yarn: Kevlar , K-49 1140 denier
Fill Yarn: Kevlar , K-49 1140 denier
Fabric Weight, Dry 5.1 (oz/sq. yd) +/- 4%
173 (g/sq. m) +/- 4%
Weave Style Plain
CONSTRUCTION
Nominal Construction Warp Count: 17 +/- 1
Yarns/inch Fill Count: 17 +/- 1
Fabric Thickness 10.0 (mils) +/- 0.5 mil
0.25 (mm) +/- 0.05 mm
Breaking Strength, (Fabric) Warp 624 (lbf/in)
Filling 643 (lbf/in)
Markets Safety and Personal Protection
Applications Aerospace / Composite
IMPORTANT
All information is believed to be accurate but is given without acceptance of liability. Users should make their own
assessment of the suitability of any product for the purpose required. All sales are made subject to our standard terms
of sales which include limitations on liability and other important terms. The fabric style listed may not be available from
inventory, and minimum order quantities may apply. Kevlar is a Registered Trademark of DuPont.
2200 S. Murray Ave.
Anderson, S.C. 29624
Tel (864) 260-3286
Fax (864) 260-6581
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
by | Sep 27, 2025
Boat and Tooling Tapes
Typical Construction Data
500 Plain Weave
500 – 0.50 – 50 .014″ 1/2″
12.7 11 15 5.9 11.46 388.49
500 – 0.75 – 50 .36mm 3/4″ 19.1 14 15 5.9 10.42 353.24
500 – 1 – 50 1″ 25.4 18 15 5.9 10.21 346.12
500 – 1.5 – 50 1 1/2″ 38.1 26 15 5.9 10.00 339.00
500 – 2 – 50 2″ 50.8 31 15 5.9 9.43 319.68
500 – 3 – 50 3″ 76.2 45 15 5.9 9.28 314.59
500 – 4 – 50 4″ 101.6 61 15 5.9 9.36 317.30
500 – 6 – 50 6″ 152.4 90 15 5.9 9.28 314.59
500 – 8 – 50 8″ 203.2 120 15 5.9 9.28 314.59
500 – 12 – 50 12″ 304.8 180 15 5.9 9.28 314.59
520 Plain Weave
520 – 0.50 – 50 0.010″ 1/2″
12.7 12 16 6.3 9.22 312.56
520 – 0.75 – 50 .25mm 3/4″ 19.1 16 16 6.3 8.60 291.54
520 – 1 – 50 1″ 25.4 19 16 6.3 8.06 273.23
520 – 1.5 – 50 1 1/2″ 38.1 30 16 6.3 8.29 281.03
520 – 2 – 50 2″ 50.8 38 16 6.3 8.06 273.23
520 – 3 – 50 3″ 76.2 55 16 6.3 7.91 268.15
520 – 4 – 50 4″ 101.6 72 16 6.3 7.83 265.44
520 – 6 – 50 6″ 152.4 108 16 6.3 7.83 265.44
520 – 8 – 50 8″ 203.2 145 16 6.3 7.86 266.45
520 – 12 – 50 12″ 304.8 212 16 6.3 7.76 263.06
640 Plain Weave
640 – 0.50 – 50 0.008″ 1″
25.4 23 16 6.3 5.99 203.06
640 – 0.75 – 50 .20mm 1 1/2″38.1 33 16 6.3 5.84 197.98
640 – 2 – 50 2″ 50.8 43 16 6.3 5.68 192.55
640 – 3 – 50 3″ 76.2 63 16 6.3 5.68 192.55
640 – 4 – 50 4″ 101.6 82 16 6.3 5.61 190.18
640 – 6 – 50 6″ 152.4 122 16 6.3 5.58 189.16
640 – 8 – 50 8″ 203.2 161 16 6.3 5.55 188.15
640 – 12 – 50 12″ 304.8 242 16 6.3 5.56 188.48
1522 Plain Weave
1522 2 – 100 .006″ 2″
50.8 50 22 8.7 3.61 122.38
1522 3 – 100 .15mm 3″ 76.2 75 22 8.7 3.61 122.38
1522 4 – 100 4″ 101.6 100 22 8.7 3.61 122.38
1522 6 – 100 6″ 152.4 150 22 8.7 3.61 122.38
1522 8 – 100 8″ 203.2 200 22 8.7 3.61 122.38
1522 10 – 100 10″ 254.0 250 22 8.7 3.61 122.38
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
Style No Thickness
Width Warp
Total Ends
Filling
Picks / Inch
Weight
OZ / SQYDPicks / cmInches mm GR / SQM
400 Crowfoot Satin Weave
400 – 1 – 50 .004″ 1″
25.4 60 58 22.8 3.30 111.87
400 – 1.5 – 50 .10mm 1 1/2″38.1 90 58 22.8 3.30 111.87
400 – 2 – 50 2″ 50.8 120 58 22.8 3.30 111.87
400 – 3 – 50 3″ 76.2 180 58 22.8 3.30 111.87
900 8 Harness Satin Weave
900 – 1 – 50 .009″ 1″
25.4 56 54 21.3 9.00 305.10
900 – 1.5 – 50 .23mm 1 1/2″38.1 84 54 21.3 9.00 305.10
900 – 2 – 50 2″ 50.8 112 54 21.3 9.00 305.10
900 – 3 – 50 3″ 76.2 168 54 21.3 9.00 305.10
900 – 4 – 50 4″ 101.6 224 54 21.3 9.00 305.10
900 – 6 – 50 6″ 152.4 336 54 21.3 9.00 305.10
All statements herein are expressions of opinion which we believe to be accurate and reliable but are presented without guarantee or responsibility on our
part.
Statements concerning possible use of our products are not intended as recommendations for their use in the infringement of any patent.
No patent warranty of any kind, expressed or implied, is made or intended.
