by | Sep 27, 2025
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/06/2016 Revision date: 01/06/2016 Supersedes: 09/10/2014
01/06/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : GREY SANDING GEL COAT
CAS No : mixture
Product code : 107-010
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 2/10
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.485 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 24 Not classified
titanium(IV) oxide (CAS No) 13463-67-7 <= 5 Carc. 2, H351
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell. Allow victim to breathe fresh air. Allow
the victim to rest.
First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
Get medical advice/attention. Specific treatment (see ... on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 3/10
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR
VAPORS. Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Eliminate all ignition sources if safe to do so. Wash hands and other
exposed areas with mild soap and water before eating, drinking or smoking and when leaving
work. Provide good ventilation in process area to prevent formation of vapor. No open flames. No
smoking. Take precautionary measures against static discharge. Use only non-sparking tools.
Hygiene measures : Wash ... thoroughly after handling.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 4/10
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/
equipment.
Storage conditions : Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away
from : Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
titanium(IV) oxide (13463-67-7)
USA ACGIH ACGIH TWA (mg/m ) 10 mg/m
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Gray.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 30 - 34 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : 1.4
Solubility : No data available
Log Pow : No data available
Log Kow : No data available
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 5/10
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapor. Not established. Flammable liquid and
vapor. May form flammable/explosive vapor-air mixture.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
GREY SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
titanium(IV) oxide (13463-67-7)
LD50 oral rat > 10000 mg/kg (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure; Experimental
value; > 5000 mg/kg bodyweight; Rat; Experimental value)
LD50 dermal rabbit > 10000 mg/kg (Rabbit; Experimental value)
LC50 inhalation rat (mg/l) > 6.8 mg/l/4h (Rat; Experimental value)
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 6/10
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
talc (14807-96-6)
IARC group 3 – Not classifiable
titanium(IV) oxide (13463-67-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
titanium(IV) oxide (13463-67-7)
LC50 fish 1 > 1000 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 < 1000 mg/l (432 h; Daphnia magna; Static system)
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 7/10
titanium(IV) oxide (13463-67-7)
LC50 fish 2 > 1 g/l (96 h; Leuciscus idus)
EC50 Daphnia 2 < 500 mg/l (720 h; Daphnia magna; Static system)
Threshold limit algae 1 61 mg/l (72 h; Pseudokirchneriella subcapitata)
12.2. Persistence and degradability
GREY SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
titanium(IV) oxide (13463-67-7)
Persistence and degradability Biodegradability: not applicable. Low potential for mobility in soil.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
12.3. Bioaccumulative potential
GREY SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
titanium(IV) oxide (13463-67-7)
Bioaccumulative potential Not bioaccumulative.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 8/10
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to ...
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 9/10
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 10/10
SECTION 16: Other information
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/06/2016 Revision date: 01/06/2016 Supersedes: 09/10/2014
01/06/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : GREY SANDING GEL COAT
CAS No : mixture
Product code : 107-010
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 2/10
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.485 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 24 Not classified
titanium(IV) oxide (CAS No) 13463-67-7 <= 5 Carc. 2, H351
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a
POISON CENTER or doctor/physician if you feel unwell. Allow victim to breathe fresh air. Allow
the victim to rest.
First-aid measures after skin contact : Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
Get medical advice/attention. Specific treatment (see ... on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 3/10
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Use only outdoors or in a well-ventilated area. Avoid breathing DUST, FUMES, MIST, OR
VAPORS. Obtain special instructions before use. Do not handle until all safety precautions have
been read and understood. Eliminate all ignition sources if safe to do so. Wash hands and other
exposed areas with mild soap and water before eating, drinking or smoking and when leaving
work. Provide good ventilation in process area to prevent formation of vapor. No open flames. No
smoking. Take precautionary measures against static discharge. Use only non-sparking tools.
Hygiene measures : Wash ... thoroughly after handling.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 4/10
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/
equipment.
Storage conditions : Keep in fireproof place. Keep only in the original container in a cool, well ventilated place away
from : Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
titanium(IV) oxide (13463-67-7)
USA ACGIH ACGIH TWA (mg/m ) 10 mg/m
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Gray.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 30 - 34 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : 1.4
Solubility : No data available
Log Pow : No data available
Log Kow : No data available
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 5/10
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Highly flammable liquid and vapor. Not established. Flammable liquid and
vapor. May form flammable/explosive vapor-air mixture.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
GREY SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
titanium(IV) oxide (13463-67-7)
LD50 oral rat > 10000 mg/kg (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure; Experimental
value; > 5000 mg/kg bodyweight; Rat; Experimental value)
LD50 dermal rabbit > 10000 mg/kg (Rabbit; Experimental value)
LC50 inhalation rat (mg/l) > 6.8 mg/l/4h (Rat; Experimental value)
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 6/10
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
talc (14807-96-6)
IARC group 3 – Not classifiable
titanium(IV) oxide (13463-67-7)
IARC group 2B – Possibly carcinogenic to humans
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
titanium(IV) oxide (13463-67-7)
LC50 fish 1 > 1000 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 < 1000 mg/l (432 h; Daphnia magna; Static system)
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 7/10
titanium(IV) oxide (13463-67-7)
LC50 fish 2 > 1 g/l (96 h; Leuciscus idus)
EC50 Daphnia 2 < 500 mg/l (720 h; Daphnia magna; Static system)
Threshold limit algae 1 61 mg/l (72 h; Pseudokirchneriella subcapitata)
12.2. Persistence and degradability
GREY SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
titanium(IV) oxide (13463-67-7)
Persistence and degradability Biodegradability: not applicable. Low potential for mobility in soil.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
12.3. Bioaccumulative potential
GREY SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
titanium(IV) oxide (13463-67-7)
Bioaccumulative potential Not bioaccumulative.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 8/10
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to ...
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 9/10
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
GREY SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/06/2016 EN (English US) 10/10
SECTION 16: Other information
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/05/2016 Revision date: 01/05/2016 Supersedes: 09/10/2014
01/05/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : TACOMA BLACK SANDING GEL COAT
CAS No : mixture
Product code : 102-010T
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 2/11
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.53 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 23 Not classified
methyl ethyl ketone (CAS No) 78-93-3 <= 1.1 Flam. Liq. 2, H225
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 3/11
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-
ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions
before use. Do not handle until all safety precautions have been read and understood. Eliminate
all ignition sources if safe to do so. Take precautionary measures against static discharge.
Hygiene measures : Wash HANDS thoroughly after handling.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 4/11
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
methyl ethyl ketone (78-93-3)
USA ACGIH ACGIH TWA (ppm) 200 ppm
USA ACGIH ACGIH STEL (ppm) 200 ppm
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Black.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 26.7 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : <= 1.4
Solubility : No data available
Log Pow : No data available
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 5/11
Log Kow : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
TACOMA BLACK SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
methyl ethyl ketone (78-93-3)
LD50 oral rat 2737 mg/kg (Rat; Equivalent or similar to OECD 423; Read-across; 2054 mg/kg; Rat;
Equivalent or similar to OECD 423; Read-across; 2328 mg/kg; Rat)
LD50 dermal rabbit 6480 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >10; Rabbit)
LC50 inhalation rat (mg/l) 34 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 11300 ppm/4h (Rat; Literature study)
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 6/11
methyl ethyl ketone (78-93-3)
ATE CLP (oral) 2737.000 mg/kg body weight
ATE CLP (dermal) 6480.000 mg/kg body weight
ATE CLP (gases) 11300.000 ppmV/4h
ATE CLP (vapors) 34.000 mg/l/4h
ATE CLP (dust, mist) 34.000 mg/l/4h
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
talc (14807-96-6)
IARC group 3 – Not classifiable
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 7/11
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
methyl ethyl ketone (78-93-3)
LC50 fish 1 1690 mg/l (96 h; Lepomis macrochirus; Lethal)
EC50 Daphnia 1 308 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 2990 mg/l (96 h; Pimephales promelas)
TLM fish 1 5600 mg/l (96 h; Gambusia affinis)
TLM fish 2 1690 mg/l (96 h; Lepomis macrochirus)
TLM other aquatic organisms 1 > 1000 ppm (96 h)
Threshold limit algae 1 110 mg/l (168 h; Microcystis aeruginosa)
Threshold limit algae 2 4300 mg/l (192 h; Scenedesmus quadricauda)
12.2. Persistence and degradability
TACOMA BLACK SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
methyl ethyl ketone (78-93-3)
Persistence and degradability Readily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD) 1.92 g O /g substance
Chemical oxygen demand (COD) 2.31 g O /g substance
ThOD 2.44 g O /g substance
BOD (% of ThOD) > % ThOD (5 day(s)) > 0.5
12.3. Bioaccumulative potential
TACOMA BLACK SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 8/11
methyl ethyl ketone (78-93-3)
Log Pow 0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
methyl ethyl ketone (78-93-3)
Surface tension 0.024 N/m (20 C)
Ecology - soil Slightly harmful to plants.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 9/11
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
methyl ethyl ketone (78-93-3)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
5000 lb
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 10/11
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
SECTION 16: Other information
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 2 Flammable liquids Category 2
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H225 Highly flammable liquid and vapor
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H336 May cause drowsiness or dizziness
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 11/11
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/05/2016 Revision date: 01/05/2016 Supersedes: 09/10/2014
01/05/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : TACOMA BLACK SANDING GEL COAT
CAS No : mixture
Product code : 102-010T
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 2/11
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.53 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 23 Not classified
methyl ethyl ketone (CAS No) 78-93-3 <= 1.1 Flam. Liq. 2, H225
STOT SE 3, H336
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 3/11
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-
ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions
before use. Do not handle until all safety precautions have been read and understood. Eliminate
all ignition sources if safe to do so. Take precautionary measures against static discharge.
Hygiene measures : Wash HANDS thoroughly after handling.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 4/11
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
methyl ethyl ketone (78-93-3)
USA ACGIH ACGIH TWA (ppm) 200 ppm
USA ACGIH ACGIH STEL (ppm) 200 ppm
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Black.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 26.7 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : <= 1.4
Solubility : No data available
Log Pow : No data available
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 5/11
Log Kow : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
TACOMA BLACK SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
methyl ethyl ketone (78-93-3)
LD50 oral rat 2737 mg/kg (Rat; Equivalent or similar to OECD 423; Read-across; 2054 mg/kg; Rat;
Equivalent or similar to OECD 423; Read-across; 2328 mg/kg; Rat)
LD50 dermal rabbit 6480 mg/kg (Rabbit; Experimental value; Equivalent or similar to OECD 402; >10; Rabbit)
LC50 inhalation rat (mg/l) 34 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 11300 ppm/4h (Rat; Literature study)
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 6/11
methyl ethyl ketone (78-93-3)
ATE CLP (oral) 2737.000 mg/kg body weight
ATE CLP (dermal) 6480.000 mg/kg body weight
ATE CLP (gases) 11300.000 ppmV/4h
ATE CLP (vapors) 34.000 mg/l/4h
ATE CLP (dust, mist) 34.000 mg/l/4h
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
talc (14807-96-6)
IARC group 3 – Not classifiable
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled. Based on available data, the classification criteria are not met.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 7/11
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
methyl ethyl ketone (78-93-3)
LC50 fish 1 1690 mg/l (96 h; Lepomis macrochirus; Lethal)
EC50 Daphnia 1 308 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 2990 mg/l (96 h; Pimephales promelas)
TLM fish 1 5600 mg/l (96 h; Gambusia affinis)
TLM fish 2 1690 mg/l (96 h; Lepomis macrochirus)
TLM other aquatic organisms 1 > 1000 ppm (96 h)
Threshold limit algae 1 110 mg/l (168 h; Microcystis aeruginosa)
Threshold limit algae 2 4300 mg/l (192 h; Scenedesmus quadricauda)
12.2. Persistence and degradability
TACOMA BLACK SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
methyl ethyl ketone (78-93-3)
Persistence and degradability Readily biodegradable in water. Biodegradable in the soil. Biodegradable in the soil under
anaerobic conditions. Not established.
Biochemical oxygen demand (BOD) 1.92 g O /g substance
Chemical oxygen demand (COD) 2.31 g O /g substance
ThOD 2.44 g O /g substance
BOD (% of ThOD) > % ThOD (5 day(s)) > 0.5
12.3. Bioaccumulative potential
TACOMA BLACK SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 8/11
methyl ethyl ketone (78-93-3)
Log Pow 0.3 (Experimental value; OECD 117: Partition Coefficient (n-octanol/water), HPLC method; 40
C)
Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4). Not established.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
methyl ethyl ketone (78-93-3)
Surface tension 0.024 N/m (20 C)
Ecology - soil Slightly harmful to plants.
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 9/11
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
methyl ethyl ketone (78-93-3)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
5000 lb
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 10/11
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
SECTION 16: Other information
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 2 Flammable liquids Category 2
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H225 Highly flammable liquid and vapor
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H336 May cause drowsiness or dizziness
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
TACOMA BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 11/11
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/05/2016 Revision date: 01/05/2016 Supersedes: 09/10/2014
01/05/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : BLACK SANDING GEL COAT
CAS No : mixture
Product code : 102-010
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 2/10
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.85 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 24 Not classified
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 3/10
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-
ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions
before use. Do not handle until all safety precautions have been read and understood. Eliminate
all ignition sources if safe to do so. Take precautionary measures against static discharge.
Hygiene measures : Wash HANDS thoroughly after handling.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 4/10
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Black.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 32.2 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : <= 1.4
Solubility : No data available
Log Pow : No data available
Log Kow : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 5/10
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
BLACK SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 6/10
talc (14807-96-6)
IARC group 3 – Not classifiable
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
12.2. Persistence and degradability
BLACK SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 7/10
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
12.3. Bioaccumulative potential
BLACK SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 8/10
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 9/10
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
SECTION 16: Other information
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 10/10
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
Date of issue: 01/05/2016 Revision date: 01/05/2016 Supersedes: 09/10/2014
01/05/2016 EN (English US) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form : Mixture
Trade name : BLACK SANDING GEL COAT
CAS No : mixture
Product code : 102-010
Formula : na
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : SANDING GEL COAT
1.3. Details of the supplier of the safety data sheet
Dura Technologies, Inc.
2720 South Willow Avenue #A
Bloomington, CA 92316
909.877.8477
ChemTrec US: 800.424.9300
ChemTrec Int: +1 70 3527 3887
1.4. Emergency telephone number
Emergency number : ChemTrec US: 800.424.9300 Int: +1 70 3527 3887
CHEMTREC: 1-800-424-9300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
Flam. Liq. 3 H226
Skin Irrit. 2 H315
Eye Irrit. 2A H319
Carc. 2 H351
Repr. 2 H361
STOT SE 3 H335
STOT RE 1 H372
2.2. Label elements
GHS-US labeling
Hazard pictograms (GHS-US) :
GHS02
GHS07
GHS08
Signal word (GHS-US) : Danger
Hazard statements (GHS-US) : H226 – Flammable liquid and vapor
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H335 – May cause respiratory irritation
H351 – Suspected of causing cancer
H361 – Suspected of damaging fertility or the unborn child
H372 – Causes damage to organs through prolonged or repeated exposure
Precautionary statements (GHS-US) : P201 – Obtain special instructions before use
P202 – Do not handle until all safety precautions have been read and understood
P210 – Keep away from heat, hot surfaces, open flames, sparks. – No smoking
P233 – Keep container tightly closed
P240 – Ground/bond container and receiving equipment
P241 – Use explosion-proof electrical, lighting, ventilating equipment
P242 – Use only non-sparking tools
P243 – Take precautionary measures against static discharge
P260 – Do not breathe dust, fume, mist, spray, vapors
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 2/10
P264 – Wash EXPOSED AREA. thoroughly after handling
P270 – Do not eat, drink or smoke when using this product
P271 – Use only outdoors or in a well-ventilated area
P280 – Wear eye protection, protective clothing, protective gloves
P302+P352 – IF ON SKIN: Wash with plenty of soap and water
P303+P361+P353 – IF ON SKIN (or hair): Remove/Take off immediately all contaminated
clothing. Rinse skin with water/shower
P304+P340 – IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing
P305+P351+P338 – If in eyes: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing
P308+P313 – IF exposed or concerned: Get medical advice/attention
P312 – Call a POISON CENTER or doctor/physician if you feel unwell
P314 – Get medical advice and attention if you feel unwell
P321 – Specific treatment (see SEEK MEDICAL AID. on this label)
P332+P313 – If skin irritation occurs: Get medical advice/attention
P337+P313 – If eye irritation persists: Get medical advice/attention
P362 – Take off contaminated clothing and wash it before reuse
P370+P378 – In case of fire: Use carbon dioxide (CO2), dry chemical powder, foam to
extinguish
P403+P233 – Store in a well-ventilated place. Keep container tightly closed
P403+P235 – Store in a well-ventilated place. Keep cool
P405 – Store locked up
P501 – Dispose of contents/container to LOCAL, STATE, AND NATIONAL REGULATIONS.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS-US)
No data available
SECTION 3: Composition/Information on ingredients
3.1. Substance
Not applicable
Full text of H-phrases: see section 16
3.2. Mixture
Name Product identifier % GHS-US classification
Unsaturated Polyester Resin (CAS No) TRADE SECRET <= 31 Not classified
styrene, inhibited (CAS No) 100-42-5 <= 27.85 Flam. Liq. 3, H226
Acute Tox. 4 (Inhalation:vapour),
H332
Skin Irrit. 2, H315
Eye Irrit. 2A, H319
Carc. 2, H351
Repr. 2, H361
STOT SE 3, H335
STOT RE 1, H372
Asp. Tox. 1, H304
talc (CAS No) 14807-96-6 <= 24 Not classified
cobalt(II) 2-ethylhexanoate (CAS No) 136-52-7 <= 0.5 Carc. 2, H351
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice
(show the label where possible).
First-aid measures after inhalation : Allow victim to breathe fresh air. Allow the victim to rest. Remove victim to fresh air and keep at
rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you
feel unwell.
First-aid measures after skin contact : Rinse skin with water/shower. Remove/Take off immediately all contaminated clothing. Wash
with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs:
wash throughly for five minutes. seek medical attention. Get medical advice/attention. Specific
treatment (see seek medical attention. on this label).
First-aid measures after eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: SEEK IMMEDIATE MEDICAL ATTENTION. Get
medical advice/attention.
First-aid measures after ingestion : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 3/10
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries : May cause genetic defects (avoid skin contact and inhalation.). May cause cancer (avoid skin
contact and inhalation.).
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard : Highly flammable liquid and vapor. Flammable liquid and vapor.
Explosion hazard : May form flammable/explosive vapor-air mixture.
Reactivity : No reactivity hazard other than the effects described in sub-sections below.
5.3. Advice for firefighters
Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire-fighting water from entering environment.
Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures : Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking.
6.1.1. For non-emergency personnel
Protective equipment : Gloves. Protective goggles. Protective clothing.
Emergency procedures : Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment : Equip cleanup crew with proper protection.
Emergency procedures : Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
For containment : Dam up the liquid spill. Contain released substance, pump into suitable containers.
Methods for cleaning up : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed : Handle empty containers with care because residual vapors are flammable.
Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor. No open flames. No smoking. Use only non-sparking tools. Use only outdoors or in a well-
ventilated area. Avoid breathing DUST, FUMES, MIST, OR VAPORS. Obtain special instructions
before use. Do not handle until all safety precautions have been read and understood. Eliminate
all ignition sources if safe to do so. Take precautionary measures against static discharge.
Hygiene measures : Wash HANDS thoroughly after handling.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 4/10
7.2. Conditions for safe storage, including any incompatibilities
Technical measures : Proper grounding procedures to avoid static electricity should be followed. Ground/bond
container and receiving equipment. Use explosion-proof electrical, ventilating and lighting
equipment. equipment.
Storage conditions : Keep only in the original container in a cool, well ventilated place away from : HEAT SPARKS
OR OPEN FLAMES. Keep in fireproof place. Keep container tightly closed.
Incompatible products : Strong bases. Strong acids.
Incompatible materials : Sources of ignition. Direct sunlight. Heat sources.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
styrene, inhibited (100-42-5)
USA ACGIH ACGIH TWA (ppm) 20 ppm
USA ACGIH ACGIH STEL (ppm) 20 ppm
talc (14807-96-6)
USA ACGIH ACGIH TWA (mg/m ) 2 mg/m
8.2. Exposure controls
Appropriate engineering controls : Ensure exposure is below occupational exposure limits (where available).
Personal protective equipment : Avoid all unnecessary exposure.
Hand protection : Wear protective gloves.
Eye protection : Chemical goggles or safety glasses.
Skin and body protection : Wear suitable protective clothing.
Respiratory protection : Wear appropriate mask.
Other information : Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state : Liquid
Color : Black.
Odor : characteristic.
Odor threshold : No data available
pH : No data available
Relative evaporation rate (butyl acetate=1) : No data available
Melting point : No data available
Freezing point : No data available
Boiling point : 135 - 146 C
Flash point : 32.2 C
Auto-ignition temperature : No data available
Decomposition temperature : No data available
Flammability (solid, gas) : No data available
Vapor pressure : No data available
Relative vapor density at 20 C : No data available
Relative density : No data available
Specific gravity / density : <= 1.4
Solubility : No data available
Log Pow : No data available
Log Kow : No data available
Viscosity, kinematic : No data available
Viscosity, dynamic : No data available
Explosive properties : No data available
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 5/10
Oxidizing properties : No data available
Explosive limits : No data available
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
No reactivity hazard other than the effects described in sub-sections below.
10.2. Chemical stability
Polymerization can result in formation of solid deposits, even in vapour space. Not established. Highly flammable liquid and vapor. May form
flammable/explosive vapor-air mixture. Flammable liquid and vapor.
10.3. Possibility of hazardous reactions
Not established.
10.4. Conditions to avoid
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
fume. Carbon monoxide. Carbon dioxide. May release flammable gases.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity : Not classified
BLACK SANDING GEL COAT ( f )mixture
ATE CLP (vapors) 11.000 mg/l/4h
styrene, inhibited (100-42-5)
LD50 oral rat 5000 mg/kg (Rat; Literature study; >6000 mg/kg bodyweight; Rat; Weight of evidence)
LD50 dermal rat 2820 mg/kg (Rat; Literature study; OECD 402: Acute Dermal Toxicity; >2000 mg/kg
bodyweight; Rat; Experimental value)
LD50 dermal rabbit 5010 mg/kg (Rabbit; Literature study)
LC50 inhalation rat (mg/l) 12 mg/l/4h (Rat; Literature study)
LC50 inhalation rat (ppm) 2770 ppm/4h (Rat; Literature study)
ATE CLP (oral) 5000.000 mg/kg body weight
ATE CLP (dermal) 2820.000 mg/kg body weight
ATE CLP (gases) 2770.000 ppmV/4h
ATE CLP (vapors) 12.000 mg/l/4h
ATE CLP (dust, mist) 12.000 mg/l/4h
cobalt(II) 2-ethylhexanoate (136-52-7)
LD50 oral rat 3129 mg/kg body weight (Rat; OECD 425: Acute Oral Toxicity: Up-and-Down Procedure;
Experimental value)
LD50 dermal rat > 2000 mg/kg body weight (Rat; Weight of evidence; OECD 402: Acute Dermal Toxicity)
ATE CLP (oral) 3129.000 mg/kg body weight
Skin corrosion/irritation : Causes skin irritation.
Serious eye damage/irritation : Causes serious eye irritation.
Respiratory or skin sensitization : Not classified
Germ cell mutagenicity : Not classified
Carcinogenicity : Suspected of causing cancer.
styrene, inhibited (100-42-5)
IARC group 2B – Possibly carcinogenic to humans
cobalt(II) 2-ethylhexanoate (136-52-7)
IARC group 2B – Possibly carcinogenic to humans
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 6/10
talc (14807-96-6)
IARC group 3 – Not classifiable
Reproductive toxicity : Suspected of damaging fertility or the unborn child.
Based on available data, the classification criteria are not met
Specific target organ toxicity (single exposure) : May cause respiratory irritation.
Specific target organ toxicity (repeated
exposure)
: Causes damage to organs through prolonged or repeated exposure.
Based on available data, the classification criteria are not met
Aspiration hazard : Not classified
Based on available data, the classification criteria are not met
Potential Adverse human health effects and
symptoms
: Harmful if inhaled.
Symptoms/injuries after inhalation : Danger of serious damage to health by prolonged exposure through inhalation. Harmful if
inhaled.
Symptoms/injuries after skin contact : Causes skin irritation.
Symptoms/injuries after eye contact : Causes serious eye irritation.
SECTION 12: Ecological information
12.1. Toxicity
styrene, inhibited (100-42-5)
LC50 fish 1 25 mg/l (96 h; Lepomis macrochirus; GLP)
LC50 other aquatic organisms 1 10 – 100 mg/l (96 h)
EC50 Daphnia 1 23 mg/l (48 h; Daphnia magna; Locomotor effect)
LC50 fish 2 32 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 2 27 mg/l (24 h; Daphnia magna; GLP)
TLM fish 1 25.1 mg/l (96 h; Lepomis macrochirus; Soft water)
TLM fish 2 46.4 mg/l (96 h; Pimephales promelas; Soft water)
TLM other aquatic organisms 1 10 – 100,96 h
Threshold limit other aquatic organisms 1 10 – 100,96 h; Pseudomonas putida
Threshold limit other aquatic organisms 2 72 mg/l
Threshold limit algae 1 > 200 mg/l (192 h; Scenedesmus quadricauda; Inhibitory)
Threshold limit algae 2 67 mg/l (Microcystis aeruginosa; Inhibitory)
cobalt(II) 2-ethylhexanoate (136-52-7)
LC50 fish 1 54.1 mg/l (96 h; Pimephales promelas)
EC50 Daphnia 1 2618 g/l (48 h)
Threshold limit algae 1 24.1 g/l (7 days)
Threshold limit algae 2 90.1 g/l (7 days; Lemna minor; Growth rate)
talc (14807-96-6)
LC50 fish 1 > 100 g/l (24 h; Brachydanio rerio; Intermittent flow)
12.2. Persistence and degradability
BLACK SANDING GEL COAT (mixture)
Persistence and degradability Not established.
styrene, inhibited (100-42-5)
Persistence and degradability Readily biodegradable in water. Not readily biodegradable in water. Forming sediments in
water. Non degradable in the soil. Adsorbs into the soil. Photodegradation in the air. Not
established.
Chemical oxygen demand (COD) 2.80 g O /g substance
ThOD 3.07 g O /g substance
BOD (% of ThOD) 0.42 % ThOD
cobalt(II) 2-ethylhexanoate (136-52-7)
Persistence and degradability Biodegradability in water: no data available.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 7/10
talc (14807-96-6)
Persistence and degradability Biodegradability: not applicable.
Biochemical oxygen demand (BOD) Not applicable
Chemical oxygen demand (COD) Not applicable
ThOD Not applicable
BOD (% of ThOD) Not applicable
Unsaturated Polyester Resin (TRADE SECRET)
Persistence and degradability Not established.
12.3. Bioaccumulative potential
BLACK SANDING GEL COAT (mixture)
Bioaccumulative potential Not established.
styrene, inhibited (100-42-5)
BCF fish 1 35.5 (Carassius auratus)
BCF other aquatic organisms 1 74
Log Pow 2.96 (Experimental value; OECD 107: Partition Coefficient (n-octanol/water): Shake Flask
Method; 25 C)
Bioaccumulative potential Low potential for bioaccumulation (BCF < 500). Not established.
cobalt(II) 2-ethylhexanoate (136-52-7)
Bioaccumulative potential No bioaccumulation data available.
Unsaturated Polyester Resin (TRADE SECRET)
Bioaccumulative potential Not established.
12.4. Mobility in soil
styrene, inhibited (100-42-5)
Surface tension 0.032 N/m (19 C)
cobalt(II) 2-ethylhexanoate (136-52-7)
Surface tension 0.064 N/m (20 C; 1 g/l)
12.5. Other adverse effects
Other information : Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to approved disposal site.
Additional information : Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials : Avoid release to the environment.
SECTION 14: Transport information
In accordance with DOT
UN-No.(DOT) : UN1866
Proper Shipping Name (DOT) : RESIN SOLUTION
Transport hazard class(es) (DOT) : 3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Hazard labels (DOT) : 3 - Flammable liquid
Packing group (DOT) : III - Minor Danger
Additional information
Other information : No supplementary information available.
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 8/10
ADR
Transport document description : UN 1866, 3, III, (D/E)
Packing group (ADR) : III
Class (ADR) : 3 - Flammable liquid
Hazard identification number (Kemler No.) : 33
Classification code (ADR) : F1
Hazard labels (ADR) : 3 - Flammable liquids
Orange plates :
Tunnel restriction code : D/E
LQ : 5l
Excepted quantities (ADR) : E2
Transport by sea
UN-No. (IMDG) : 1866
Proper Shipping Name (IMDG) : RESIN SOLUTION
Class (IMDG) : 3 - Flammable liquids
Packing group (IMDG) : III - substances presenting low danger
Air transport
UN-No. (IATA) : 1866
Proper Shipping Name (IATA) : RESIN SOLUTION
Class (IATA) : 3 - Flammable Liquids
Packing group (IATA) : III - Minor Danger
SECTION 15: Regulatory information
15.1. US Federal regulations
styrene, inhibited (100-42-5)
RQ (Reportable quantity, section 304 of EPA's
List of Lists)
1000 lb
SARA Section 311/312 Hazard Classes Immediate (acute) health hazard
Reactive hazard
Fire hazard
Delayed (chronic) health hazard
15.2. International regulations
CANADA
No additional information available
EU-Regulations
No additional information available
Classification according to Regulation (EC) No. 1272/2008 [CLP]
Flam. Liq. 3 H226
Acute Tox. 4 (Inhalation:vapour) H332
Skin Irrit. 2 H315
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 9/10
Eye Irrit. 2 H319
Muta. 1B H340
Carc. 1B H350
Full text of H-phrases: see section 16
Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD]
Carc.Cat.2; R45
Muta.Cat.2; R46
F; R11
Xn; R20
Xi; R36/38
Full text of R-phrases: see section 16
15.2.2. National regulations
styrene, inhibited (100-42-5)
Listed on EPA's Hazardous Air Pollutants (HAPS)
15.3. US State regulations
styrene, inhibited (100-42-5)
U.S. - California -
Proposition 65 -
Carcinogens List
U.S. - California -
Proposition 65 -
Developmental Toxicity
U.S. - California -
Proposition 65 -
Reproductive Toxicity -
Female
U.S. - California -
Proposition 65 -
Reproductive Toxicity - Male
Non-significant risk level
(NSRL)
styrene, inhibited (100-42-5)
U.S. - Massachusetts - Right To Know List
U.S. - New Jersey - Right to Know Hazardous Substance List
U.S. - Pennsylvania - RTK (Right to Know) - Environmental Hazard List
SECTION 16: Other information
Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 16 December 2008 on classification, labeling and packaging of substances and
mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending
Regulation (EC) No 1907/2006.
Other information : None.
Full text of H-phrases: see section 16:
------ Acute Tox. 4 (Inhalation:vapour) Acute toxicity (inhalation:vapour) Category 4
------ Asp. Tox. 1 Aspiration hazard Category 1
------ Carc. 2 Carcinogenicity Category 2
------ Eye Irrit. 2A Serious eye damage/eye irritation Category 2A
------ Flam. Liq. 3 Flammable liquids Category 3
------ Repr. 2 Reproductive toxicity Category 2
------ Skin Irrit. 2 Skin corrosion/irritation Category 2
------ STOT RE 1 Specific target organ toxicity (repeated exposure) Category 1
------ STOT SE 3 Specific target organ toxicity (single exposure) Category 3
------ H226 Flammable liquid and vapor
------ H304 May be fatal if swallowed and enters airways
------ H315 Causes skin irritation
------ H319 Causes serious eye irritation
------ H332 Harmful if inhaled
------ H335 May cause respiratory irritation
------ H351 Suspected of causing cancer
------ H361 Suspected of damaging fertility or the unborn child
------ H372 Causes damage to organs through prolonged or repeated exposure
BLACK SANDING GEL COAT
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/05/2016 EN (English US) 10/10
NFPA health hazard : 2 - Intense or continued exposure could cause temporary
incapacitation or possible residual injury unless prompt
medical attention is given.
NFPA fire hazard : 3 - Liquids and solids that can be ignited under almost all
ambient conditions.
NFPA reactivity : 2 - Normally unstable and readily undergo violent
decomposition but do not detonate. Also: may react
violently with water or may form potentially explosive
mixtures with water.
HMIS III Rating
Health : 2 Moderate Hazard - Temporary or minor injury may occur
Flammability : 3 Serious Hazard
Physical : 1 Slight Hazard
Personal Protection : H
SDS US (GHS HazCom 2012)
To the best of our knowledge this SDS is accurate. The the extent allowed by law, this statement is made in lieu of an other warranties, expressed or implied including but not limited to any implied
warranty of merchantability or fitness for a particular purpose and is in lieu of any other obligations or liability on the part of Dura Technoligies, Inc.
by | Sep 27, 2025
SAFETY DATA SHEET
SDS Distribution: The information in this document
should be made available to all who may handle the
product.
A.G. Layne, Inc. urges each customer or recipient of this SDS to study it carefully and consult appropriate expertise, as necessary or appropriate, to
become aware of and understand the data contained in this SDS and any hazards associated with the product. It is the Buyer’s/User’s responsibility to
ensure that his activities comply with all Federal, State, Provincial or Local laws. The information presented here pertains only to the product as shipped.
The information contained herein is based on our current knowledge of the underlying data and is intended to describe the product for the purpose of
health, safety and environmental requirements only. NO warranty or guarantee is expressed or implied regarding the accuracy of this data or the results
to be obtained from the use of the product.
Xylene
Xylene
Page 1 of 9 www.aglayne.com
SECTION 2) HAZARDS IDENTIFICATION
Classification:
Specific Target Organ Toxicity – Repeated Exposure – Category 2
Aspiration Hazard – Category 1
Skin Irritation – Category 2
Eye Irritation – Category 2A
Carcinogenicity – Category 2
Reproductive Toxicity – Category 2
Acute aquatic toxicity – Category 3
Flammable Liquids Category 3
Acute toxicity, Dermal – Category 4
Acute toxicity, Inhalation – Category 3
Pictograms:
Signal Word:
Danger
Hazardous Statements – Physical:
Flammable liquid and vapor
Hazardous Statements – Health:
Toxic if inhaled
Harmful in contact with skin
May cause damage to organs through prolonged or repeated exposure.
May be fatal if swallowed and enters airways
Causes skin irritation
Causes serious eye irritation
Suspected of causing cancer (state route of exposure if it is conclusively proven that no other routes of exposure c ause the hazard)
Suspected of damaging fertility or the unborn child.
Sep 11, 2015
A. G. Layne, Inc.
Product ID:
4578 Brazil Street Los Angeles, CA, US, 90039
Product Name:
Manufacturer’s Name:
Revision Date:
Address:
SECTION 1) CHEMICAL PRODUCT AND SUPPLIER’S IDENTIFICATION
Xylene
Version: 1.1
Date Printed: Sep 11, 2015
Supersedes Date: May 09, 2015
Xylene
Emergency Phone:
Information Phone:
CHEMTREC US : 1-800-424-9300, INTERNATIONAL CALLS : 1-703-527-3887
323-245-2345
Fax:
Product/Recommended Uses: Paints and coatings and a variety of industrial applications.
Xylene
Page 2 of 9 www.aglayne.com
Suspected of damaging fertility or the unborn child.
Hazardous Statements – Environmental:
Harmful to aquatic life
Precautionary Statements – General:
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Precautionary Statements – Prevention:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Avoid release to the environment.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment.
Use only non-sparking tools.
Take action to prevent static discharges.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wash with soap and water thoroughly after handling.
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Precautionary Statements – Response:
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse with water or shower.
In case of fire: Use DRY chemical, alcohol- resistant foam, water spray/fog or carbon-dioxide to extinguish.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor/?
Specific treatment (see First-aid on this label).
IF ON SKIN: Wash with plenty of water. Call a POISON CENTER/doctor if you feel unwell.
Take off contaminated clothing. And wash it before reuse. Get Medical advice/attention if you feel unwell.
IF SWALLOWED: Immediately call a POISON CENTER or doctor.
Do NOT induce vomiting.
IF ON SKIN: Wash with plenty of water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing. And wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF exposed or concerned: Get medical advice/attention.
Precautionary Statements – Storage:
Keep cool.
Store in a well-ventilated place.
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Store locked up.
Precautionary Statements – Disposal:
Dispose of contents/container to disposal recycling center.
Waste management should be in full compliance with federal, state and local laws.
SECTION 3) COMPOSITION / INFORMATION ON INGREDIENTS
Xylene
Page 3 of 9 www.aglayne.com
SECTION 4) FIRST-AID MEASURES
Inhalation:
Remove source of exposure or move person to fresh air and keep comfortable for breathing. If victim is not breathing, call 911 and
administer CPR as directed.
Eliminate all ignition sources if safe to do so.
Skin Contact:
Rinse/wash with lukewarm, gently flowing water (and mild soap) for 15-20 minutes or until product is removed. If skin irritation occurs or
you feel unwell: Get medical advice/attention.
Eye Contact:
Remove source of exposure or move person to fresh air. Rinse eyes cautiously with lukewarm, gently flowing water for 15-20 minutes,
while holding the eyelids open. Remove contact lenses, if present and easy to do. Continue rinsing. Take care not to rinse contaminated
water into the unaffected eye or onto the face. Get immidiate medical attention.
Ingestion:
Do NOT induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position. Immediately call 911 POISON
CENTER/doctor/. Immediately transport to the nearest medical facility for treatment.
SECTION 5) FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Dry chemical, foam, carbon dioxide or fog is recommended. Water spray is recommended to cool or protect exposed materials or
structures. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces. Simultaneous use of
foam and water on the same surface is to be avoided as water destroys the foam. Sand or earth may be used for small fires only.
Unsuitable Extinguishing Media:
No data available.
Specific Hazards in Case of Fire:
No data available.
Fire-fighting Procedures:
Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged
containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and to
protect personnel.
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Special Protective Actions:
Wear protective pressure self-contained breathing apparatus (SCBA) and full turnout gear.
SECTION 6) ACCIDENTAL RELEASE MEASURES
Emergency Procedure:
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
RELEASE CAN CAUSE FIRE/EXPLOSION. LIQUIDS/VAPORS MAY IGNITE.
Do not touch or walk through spilled material.
Isolate hazard area and keep unnecessary people away. Remove all possible sources of ignition in the surrounding area. Notify authorities
if any exposure to the general public or the environment occurs or is likely to occur.
If spilled material is cleaned up using a regulated solvent, the resulting waste mixture may be regulated.
Recommended Equipment:
Positive pressure, full-facepiece self-contained breathing apparatus (SCBA), or positive pressure supplied air respirator with escape SCBA
(NIOSH approved).
Personal Precautions:
Avoid breathing vapor. Avoid contact with skin, eye or clothing. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in
immediate area). Use explosive proof equipment. Avoid inhalation of dust and contact with skin and eyes. Do not touch damaged
containers or spilled materials unless wearing appropriate protective clothing.
CAS Chemical Name % By Weight
0001330-20-7 XYLENE 64% – 96%
0000100-41-4 ETHYLBENZENE 16% – 24%
0000108-88-3 TOLUENE 0.482% – 0.502%
Xylene
Page 4 of 9 www.aglayne.com
Environmental Precautions:
Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems
and natural waterways by using sand, earth, or other appropriate barriers.
Methods and Materials for Containment and Cleaning up:
Sand, clay and absorbent socks can be used to contain a spill.
SECTION 7) HANDLING AND STORAGE
General:
Wash hands after use.
Do not get in eyes, on skin or on clothing.
Do not breathe vapors or mists.
Use good personal hygiene practices.
Eating, drinking and smoking in work areas is prohibited.
Remove contaminated clothing and protective equipment before entering eating areas.
Eyewash stations and showers should be available in areas where this material is used and stored.
Ventilation Requirements:
Use only with adequate ventilation to control air contaminants to their exposure limits. The use of local ventilation is recommended to
control emissions near the source.
Storage Room Requirements:
Keep container(s) tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight, strong
oxidizers and any incompatibilities. Store in approved containers and protect against physical damage. Keep containers securely sealed
when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be
carefully resealed to prevent leakage. Empty container retain residue and may be dangerous.
Use non-sparking ventilation systems, approved explosion-proof equipment and intrinsically safe electrical systems in areas where this
product is used and stored.
Ground and bond containers and receiving equipment. Avoid static electricity by grounding.
Electrostatic charges may be generated during pumping. Keep away from aerosols, flammables, oxidizing agents, corrosives and from
other flammable products.
SECTION 8) EXPOSURE CONTROLS, PERSONAL PROTECTION
Chemical Name OSHA
TWA
(ppm)
OSHA
TWA
(mg/m3)
OSHA
STEL
(ppm)
OSHA
STEL
(mg/m3)
OSHA
Tables (Z1,
Z2, Z3)
OSHA
Carcinogen
OSHA
Skin
designation
NIOSH
TWA
(ppm)
NIOSH
TWA
(mg/m3)
NIOSH
STEL
(ppm)
NIOSH
STEL
(mg/m3)
NIOSH
Carcinogen
ETHYLBENZENE 100 435 1 100 435 125 545
TOLUENE 200 (a)/
300 ceiling
0.2 500ppm
/10 minutes
(a)
1,2 100 375 150 560
XYLENE 100 435 1 100 435 150 655
Respiratory Protection:
If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker, a respiratory protection
program that meets or is equivalent to OSHA 29 CFR 1910.134 and ANSI Z88.2 should be followed. Check with respiratory protective
equipment suppliers.
Skin Protection:
Use of gloves approved to relevant standards made from the following materials may provide suitable chemical protection: PVC, neoprene
or nitrile rubber gloves. Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical
resistance of glove material, glove thickness, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced.
Use of an apron and over- boots of chemically impervious materials such as neoprene or nitrile rubber is recommended to avoid skin
sensitization. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at
the specific workplace. Launder soiled clothes or properly disposed of contaminated material, which cannot be decontaminated.
Eye Protection:
Wear eye protection with side shields or goggles. Wear indirect-vent, impact and splash resistant goggles when working with liquids. If
additional protection is needed for entire face, use in combination with a face shield.
Appropriate Engineering Controls:
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold
limit value.
Xylene
Page 5 of 9 www.aglayne.com
Chemical Name ACGIH
TWA
(ppm)
ACGIH
TWA
(mg/m3)
ACGIH
STEL
(ppm)
ACGIH
STEL
(mg/m3)
ACGIH
Carcinogen
ACGIH
Notations
ACGIH
TLV Basis
ETHYLBENZENE 20 A3 A3; BEI URT
irr;Kidney
dam
(nephropat
hy);
Cochlear
impair
TOLUENE 20 0.2 A4 A4; BEI Visual
impair;
female
repro;
pregnancy
loss
XYLENE 100 434 150 651 A4 A4; BEI URT & eye
irr; CNS
imapir
SECTION 9) PHYSICAL AND CHEMICAL PROPERTIES
Appearance Colorless liquid
Odor Threshold N/A
Odor Description Aromatic, benzene like
pH N/A
Water Solubility N/A
Flammability Flashpoint at or above 73 F and below 100 F
Flash Point Symbol N/A
Flash Point 26 C
Viscosity N/A
Lower Explosion Level N/A
Upper Explosion Level N/A
Vapor Pressure N/A
Vapor Density N/A
Freezing Point -15.07 F
Melting Point -15.07 F
Low Boiling Point N/A
High Boiling Point N/A
Auto Ignition Temp 865 F
Decomposition Pt N/A
Evaporation Rate N/A
Coefficient Water/Oil N/A
VOC Composite Partial Pressure 8.49767 mmHg (Calculated @ 20 C/68 F)
Physical and Chemical Properties
Specific Gravity 0.87
Density 7.27 lb/gal
% VOC 100.00%
VOC Actual 7.27 lb/gal
Density VOC 7.27 lb/gal
% Solids By Weight 0.00%
SECTION 10) STABILITY AND REACTIVITY
Stability:
Stable under normal conditions of use.
Xylene
Page 6 of 9 www.aglayne.com
Conditions to Avoid:
Avoid heat, sparks, open flames and other ignition sources.
Hazardous Reactions/Polymerization:
No data available.
Incompatible Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Thermal decomposition may yield carbon dioxide and/or carbon monoxide.
SECTION 11) TOXICOLOGICAL INFORMATION
0000100-41-4 ETHYLBENZENE
0000108-88-3 TOLUENE
0001330-20-7 XYLENE
Chronic Exposure
0000100-41-4 ETHYLBENZENE
CARCINOGENIC EFFECTS: Ethyl Benzene has been listed by IARC as Group 2B, Possibly Carcinogenic to Humans.
TERATOGENIC EFFECTS: Ethyl Benzene has been Classified as POSSIBLE for humans.
0000108-88-3 TOLUENE
TERATOGENIC EFFECTS:Toluene has been Classified as POSSIBLE for humans.
0001330-20-7 XYLENE
Xylene in high concentrations has caused embryotoxic effects in laboratory animals.
High exposure to Xylenes in some animal studies have been reported to cause health effects on the developing embryo/fetus.
Potential Health Effects – Miscellaneous
0000100-41-4 ETHYLBENZENE
Is an IARC, NTP or OSHA carcinogen. Increased susceptibility to the effects of this material may be observed in people with preexisting
disease of any of the following: central nervous system, kidneys, liver, lungs. Recurrent overexposure may result in liver and kidney
injury. Studies in laboratory animals have shown reproductive, embryotoxic and developmental effects. WARNING: This chemical is
known to the State of California to cause cancer.
Acute toxicity:
Ingestion: May be harmful or fatal if swallowed.
Skin Corrosion/Irritation:
Causes skin irritation
Serious eye damage/irritation:
Causes serious eye irritation
Germ cell mutagenicity:
No data available
Respiratory/Skin Sensitization:
Slightly irritating to respiratory system.
Carcinogenicity:
Suspected of causing cancer (state route of exposure if it is conclusively proven that no other routes of exposure c ause the hazard)
Reproductive toxicity:
Suspected of damaging fertility or the unborn child.
Specific Target Organ Toxicity – Repeated Exposure:
May cause damage to organs through prolonged or repeated exposure.
Specific Target Organ Toxicity – Single Exposure:
No data available
Aspiration hazard:
May be fatal if swallowed and enters airways
Xylene
Page 7 of 9 www.aglayne.com
0000108-88-3 TOLUENE
Increased susceptibility to the effects of this material may be observed in people with preexisting disease of any of the following: central
nervous system, kidneys, liver, respiratory system, skin. Can be absorbed through the skin in harmful amounts. Recurrent
overexposure may result in liver and kidney injury. High airborne levels have produced irregular heart beats in animals and occasional
palpitations in humans. Rats exposed to very high airborne levels have exhibited high frequency hearing deficits. The significance of
this to man is unknown. WARNING: This chemical is known to the State of California to cause birth defects or other reproductive harm.
0001330-20-7 XYLENE
Increased susceptibility to the effects of this material may be observed in people with preexisting disease of any of the following: bone
marrow, cardiovascular system, central nervous system, kidneys, liver, lungs. Recurrent overexposure may result in liver and kidney
injury. High exposures may produce irregular heart beats. Canada classifies Xylene as a developmental toxin as high exposures to
xylenes in some animal studies have been reported to cause health effects on the developing fetus/embryo. These effects were often at
levels toxic to the adult animal. The significance of these effects to humans is not known. Repeated or prolonged skin contact may
cause any of the following: irritation, dryness, cracking of the skin.
SECTION 12) ECOLOGICAL INFORMATION
Bio-accumulative Potential:
No data available.
Persistence and Degradability:
No data available.
Mobility in Soil:
No data available.
Toxicity:
Harmful to aquatic life
Other adverse effects:
No data available.
SECTION 13) DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Under RCRA it is the responsibility of the user of the product to determine at the time of disposal whether the product meets RCRA criteria
for hazardous waste. Waste management should be in full compliance with federal, state and local laws.
Empty Containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld or use for any
other purposes. Return drums to reclamation centers for proper cleaning and reuse.
SECTION 14) TRANSPORT INFORMATION
U.S. DOT Information:
UN1307, Xylenes, 3, PG II
Emergency Response Guide (ERG):
Emergency Response Guide 130
SECTION 15) REGULATORY INFORMATION
CAS Chemical Name % By Weight Regulation List
0001330-20-7 XYLENE 64% – 96% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,RCRA,CA_TAC_TOX,NEI – National Emissions
Inventory,OSHA
0000100-41-4 ETHYLBENZENE 16% – 24% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,CA_TAC_TOX,CA_Carcinogen,NEI – National
Emissions Inventory,CA_Prop65 – California Proposition 65,CA_Prop65_Type_Toxicity_Cancer –
CA_Proposition65_Type_Toxicity_Cancer,OSHA
0000108-88-3 TOLUENE 0.482% – 0.502% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,RCRA,CA_TAC_TOX,NEI – National Emissions
Inventory,CA_Prop65 – California Proposition 65,CA_Prop65_Type_Toxicity_Develop –
CA_Proposition65_Type_Toxicity_Developmental,OSHA
SECTION 16) OTHER INFORMATION
Xylene
Page 8 of 9 www.aglayne.com
General:
A.G. Layne, Inc. urges each customer or recipient of this SDS to study it carefully and consult appropriate expertise, as necessary or
appropriate, to become aware of and understand the data contained in this SDS and any hazards associated with the product. It is the
Buyer’s/User’s responsibility to ensure that his activities comply with all Federal, State, Provincial or Local laws. The information presented
here pertains only to the product as shipped. The information contained herein is based on our current knowledge of the underlying data
and is intended to describe the product for the purpose of health, safety and environmental requirements only. NO warranty or guarantee
is expressed or implied regarding the accuracy of this data or the results to be obtained from the use of the product.
3
1
H
0
HMIS
Chronic :
Version 1.1:
Change in Section 8
DISCLAIMER
To the best of our knowledge, the information contained herein is accurate. However, neither A. G. Layne, Inc. nor any of its subsidiaries assumes
any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the
sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist. The above information pertains to this product as currently
formulated, and is based on the information available at this time. Addition of reducers or other additives to this product may substantially alter the
composition and hazards of the product. Since conditions of use are outside our control, we make no warranties, express or implied, and assume
no liability in connection with any use of this information.
Xylene
Page 9 of 9 www.aglayne.com
by | Sep 27, 2025
by | Sep 27, 2025
SAFETY DATA SHEET
SDS Distribution: The information in this document
should be made available to all who may handle the
product.
A.G. Layne, Inc. urges each customer or recipient of this SDS to study it carefully and consult appropriate expertise, as necessary or appropriate, to
become aware of and understand the data contained in this SDS and any hazards associated with the product. It is the Buyer’s/User’s responsibility to
ensure that his activities comply with all Federal, State, Provincial or Local laws. The information presented here pertains only to the product as shipped.
The information contained herein is based on our current knowledge of the underlying data and is intended to describe the product for the purpose of
health, safety and environmental requirements only. NO warranty or guarantee is expressed or implied regarding the accuracy of this data or the results
to be obtained from the use of the product.
Xylene
Xylene
Page 1 of 9 www.aglayne.com
SECTION 2) HAZARDS IDENTIFICATION
Classification:
Specific Target Organ Toxicity – Repeated Exposure – Category 2
Aspiration Hazard – Category 1
Skin Irritation – Category 2
Eye Irritation – Category 2A
Carcinogenicity – Category 2
Reproductive Toxicity – Category 2
Acute aquatic toxicity – Category 3
Flammable Liquids Category 3
Acute toxicity, Dermal – Category 4
Acute toxicity, Inhalation – Category 3
Pictograms:
Signal Word:
Danger
Hazardous Statements – Physical:
Flammable liquid and vapor
Hazardous Statements – Health:
Toxic if inhaled
Harmful in contact with skin
May cause damage to organs through prolonged or repeated exposure.
May be fatal if swallowed and enters airways
Causes skin irritation
Causes serious eye irritation
Suspected of causing cancer (state route of exposure if it is conclusively proven that no other routes of exposure c ause the hazard)
Suspected of damaging fertility or the unborn child.
Sep 11, 2015
A. G. Layne, Inc.
Product ID:
4578 Brazil Street Los Angeles, CA, US, 90039
Product Name:
Manufacturer’s Name:
Revision Date:
Address:
SECTION 1) CHEMICAL PRODUCT AND SUPPLIER’S IDENTIFICATION
Xylene
Version: 1.1
Date Printed: Sep 11, 2015
Supersedes Date: May 09, 2015
Xylene
Emergency Phone:
Information Phone:
CHEMTREC US : 1-800-424-9300, INTERNATIONAL CALLS : 1-703-527-3887
323-245-2345
Fax:
Product/Recommended Uses: Paints and coatings and a variety of industrial applications.
Xylene
Page 2 of 9 www.aglayne.com
Suspected of damaging fertility or the unborn child.
Hazardous Statements – Environmental:
Harmful to aquatic life
Precautionary Statements – General:
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Read label before use.
Precautionary Statements – Prevention:
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Avoid release to the environment.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment.
Use only non-sparking tools.
Take action to prevent static discharges.
Wear protective gloves/protective clothing/eye protection/face protection.
Avoid breathing dust/fume/gas/mist/vapors/spray.
Use only outdoors or in a well-ventilated area.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wash with soap and water thoroughly after handling.
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Precautionary Statements – Response:
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse with water or shower.
In case of fire: Use DRY chemical, alcohol- resistant foam, water spray/fog or carbon-dioxide to extinguish.
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor/?
Specific treatment (see First-aid on this label).
IF ON SKIN: Wash with plenty of water. Call a POISON CENTER/doctor if you feel unwell.
Take off contaminated clothing. And wash it before reuse. Get Medical advice/attention if you feel unwell.
IF SWALLOWED: Immediately call a POISON CENTER or doctor.
Do NOT induce vomiting.
IF ON SKIN: Wash with plenty of water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing. And wash it before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF exposed or concerned: Get medical advice/attention.
Precautionary Statements – Storage:
Keep cool.
Store in a well-ventilated place.
Store in a well-ventilated place. Keep container tightly closed. Store locked up.
Store locked up.
Precautionary Statements – Disposal:
Dispose of contents/container to disposal recycling center.
Waste management should be in full compliance with federal, state and local laws.
SECTION 3) COMPOSITION / INFORMATION ON INGREDIENTS
Xylene
Page 3 of 9 www.aglayne.com
SECTION 4) FIRST-AID MEASURES
Inhalation:
Remove source of exposure or move person to fresh air and keep comfortable for breathing. If victim is not breathing, call 911 and
administer CPR as directed.
Eliminate all ignition sources if safe to do so.
Skin Contact:
Rinse/wash with lukewarm, gently flowing water (and mild soap) for 15-20 minutes or until product is removed. If skin irritation occurs or
you feel unwell: Get medical advice/attention.
Eye Contact:
Remove source of exposure or move person to fresh air. Rinse eyes cautiously with lukewarm, gently flowing water for 15-20 minutes,
while holding the eyelids open. Remove contact lenses, if present and easy to do. Continue rinsing. Take care not to rinse contaminated
water into the unaffected eye or onto the face. Get immidiate medical attention.
Ingestion:
Do NOT induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position. Immediately call 911 POISON
CENTER/doctor/. Immediately transport to the nearest medical facility for treatment.
SECTION 5) FIRE-FIGHTING MEASURES
Suitable Extinguishing Media:
Dry chemical, foam, carbon dioxide or fog is recommended. Water spray is recommended to cool or protect exposed materials or
structures. Carbon dioxide can displace oxygen. Use caution when applying carbon dioxide in confined spaces. Simultaneous use of
foam and water on the same surface is to be avoided as water destroys the foam. Sand or earth may be used for small fires only.
Unsuitable Extinguishing Media:
No data available.
Specific Hazards in Case of Fire:
No data available.
Fire-fighting Procedures:
Isolate immediate hazard area and keep unauthorized personnel out. Stop spill/release if it can be done safely. Move undamaged
containers from immediate hazard area if it can be done safely. Water spray may be useful in minimizing or dispersing vapors and to
protect personnel.
Dispose of fire debris and contaminated extinguishing water in accordance with official regulations.
Special Protective Actions:
Wear protective pressure self-contained breathing apparatus (SCBA) and full turnout gear.
SECTION 6) ACCIDENTAL RELEASE MEASURES
Emergency Procedure:
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
RELEASE CAN CAUSE FIRE/EXPLOSION. LIQUIDS/VAPORS MAY IGNITE.
Do not touch or walk through spilled material.
Isolate hazard area and keep unnecessary people away. Remove all possible sources of ignition in the surrounding area. Notify authorities
if any exposure to the general public or the environment occurs or is likely to occur.
If spilled material is cleaned up using a regulated solvent, the resulting waste mixture may be regulated.
Recommended Equipment:
Positive pressure, full-facepiece self-contained breathing apparatus (SCBA), or positive pressure supplied air respirator with escape SCBA
(NIOSH approved).
Personal Precautions:
Avoid breathing vapor. Avoid contact with skin, eye or clothing. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in
immediate area). Use explosive proof equipment. Avoid inhalation of dust and contact with skin and eyes. Do not touch damaged
containers or spilled materials unless wearing appropriate protective clothing.
CAS Chemical Name % By Weight
0001330-20-7 XYLENE 64% – 96%
0000100-41-4 ETHYLBENZENE 16% – 24%
0000108-88-3 TOLUENE 0.482% – 0.502%
Xylene
Page 4 of 9 www.aglayne.com
Environmental Precautions:
Stop spill/release if it can be done safely. Prevent spilled material from entering sewers, storm drains, other unauthorized drainage systems
and natural waterways by using sand, earth, or other appropriate barriers.
Methods and Materials for Containment and Cleaning up:
Sand, clay and absorbent socks can be used to contain a spill.
SECTION 7) HANDLING AND STORAGE
General:
Wash hands after use.
Do not get in eyes, on skin or on clothing.
Do not breathe vapors or mists.
Use good personal hygiene practices.
Eating, drinking and smoking in work areas is prohibited.
Remove contaminated clothing and protective equipment before entering eating areas.
Eyewash stations and showers should be available in areas where this material is used and stored.
Ventilation Requirements:
Use only with adequate ventilation to control air contaminants to their exposure limits. The use of local ventilation is recommended to
control emissions near the source.
Storage Room Requirements:
Keep container(s) tightly closed and properly labeled. Store in cool, dry, well-ventilated areas away from heat, direct sunlight, strong
oxidizers and any incompatibilities. Store in approved containers and protect against physical damage. Keep containers securely sealed
when not in use. Indoor storage should meet OSHA standards and appropriate fire codes. Containers that have been opened must be
carefully resealed to prevent leakage. Empty container retain residue and may be dangerous.
Use non-sparking ventilation systems, approved explosion-proof equipment and intrinsically safe electrical systems in areas where this
product is used and stored.
Ground and bond containers and receiving equipment. Avoid static electricity by grounding.
Electrostatic charges may be generated during pumping. Keep away from aerosols, flammables, oxidizing agents, corrosives and from
other flammable products.
SECTION 8) EXPOSURE CONTROLS, PERSONAL PROTECTION
Chemical Name OSHA
TWA
(ppm)
OSHA
TWA
(mg/m3)
OSHA
STEL
(ppm)
OSHA
STEL
(mg/m3)
OSHA
Tables (Z1,
Z2, Z3)
OSHA
Carcinogen
OSHA
Skin
designation
NIOSH
TWA
(ppm)
NIOSH
TWA
(mg/m3)
NIOSH
STEL
(ppm)
NIOSH
STEL
(mg/m3)
NIOSH
Carcinogen
ETHYLBENZENE 100 435 1 100 435 125 545
TOLUENE 200 (a)/
300 ceiling
0.2 500ppm
/10 minutes
(a)
1,2 100 375 150 560
XYLENE 100 435 1 100 435 150 655
Respiratory Protection:
If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker, a respiratory protection
program that meets or is equivalent to OSHA 29 CFR 1910.134 and ANSI Z88.2 should be followed. Check with respiratory protective
equipment suppliers.
Skin Protection:
Use of gloves approved to relevant standards made from the following materials may provide suitable chemical protection: PVC, neoprene
or nitrile rubber gloves. Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical
resistance of glove material, glove thickness, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced.
Use of an apron and over- boots of chemically impervious materials such as neoprene or nitrile rubber is recommended to avoid skin
sensitization. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at
the specific workplace. Launder soiled clothes or properly disposed of contaminated material, which cannot be decontaminated.
Eye Protection:
Wear eye protection with side shields or goggles. Wear indirect-vent, impact and splash resistant goggles when working with liquids. If
additional protection is needed for entire face, use in combination with a face shield.
Appropriate Engineering Controls:
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold
limit value.
Xylene
Page 5 of 9 www.aglayne.com
Chemical Name ACGIH
TWA
(ppm)
ACGIH
TWA
(mg/m3)
ACGIH
STEL
(ppm)
ACGIH
STEL
(mg/m3)
ACGIH
Carcinogen
ACGIH
Notations
ACGIH
TLV Basis
ETHYLBENZENE 20 A3 A3; BEI URT
irr;Kidney
dam
(nephropat
hy);
Cochlear
impair
TOLUENE 20 0.2 A4 A4; BEI Visual
impair;
female
repro;
pregnancy
loss
XYLENE 100 434 150 651 A4 A4; BEI URT & eye
irr; CNS
imapir
SECTION 9) PHYSICAL AND CHEMICAL PROPERTIES
Appearance Colorless liquid
Odor Threshold N/A
Odor Description Aromatic, benzene like
pH N/A
Water Solubility N/A
Flammability Flashpoint at or above 73 F and below 100 F
Flash Point Symbol N/A
Flash Point 26 C
Viscosity N/A
Lower Explosion Level N/A
Upper Explosion Level N/A
Vapor Pressure N/A
Vapor Density N/A
Freezing Point -15.07 F
Melting Point -15.07 F
Low Boiling Point N/A
High Boiling Point N/A
Auto Ignition Temp 865 F
Decomposition Pt N/A
Evaporation Rate N/A
Coefficient Water/Oil N/A
VOC Composite Partial Pressure 8.49767 mmHg (Calculated @ 20 C/68 F)
Physical and Chemical Properties
Specific Gravity 0.87
Density 7.27 lb/gal
% VOC 100.00%
VOC Actual 7.27 lb/gal
Density VOC 7.27 lb/gal
% Solids By Weight 0.00%
SECTION 10) STABILITY AND REACTIVITY
Stability:
Stable under normal conditions of use.
Xylene
Page 6 of 9 www.aglayne.com
Conditions to Avoid:
Avoid heat, sparks, open flames and other ignition sources.
Hazardous Reactions/Polymerization:
No data available.
Incompatible Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Thermal decomposition may yield carbon dioxide and/or carbon monoxide.
SECTION 11) TOXICOLOGICAL INFORMATION
0000100-41-4 ETHYLBENZENE
0000108-88-3 TOLUENE
0001330-20-7 XYLENE
Chronic Exposure
0000100-41-4 ETHYLBENZENE
CARCINOGENIC EFFECTS: Ethyl Benzene has been listed by IARC as Group 2B, Possibly Carcinogenic to Humans.
TERATOGENIC EFFECTS: Ethyl Benzene has been Classified as POSSIBLE for humans.
0000108-88-3 TOLUENE
TERATOGENIC EFFECTS:Toluene has been Classified as POSSIBLE for humans.
0001330-20-7 XYLENE
Xylene in high concentrations has caused embryotoxic effects in laboratory animals.
High exposure to Xylenes in some animal studies have been reported to cause health effects on the developing embryo/fetus.
Potential Health Effects – Miscellaneous
0000100-41-4 ETHYLBENZENE
Is an IARC, NTP or OSHA carcinogen. Increased susceptibility to the effects of this material may be observed in people with preexisting
disease of any of the following: central nervous system, kidneys, liver, lungs. Recurrent overexposure may result in liver and kidney
injury. Studies in laboratory animals have shown reproductive, embryotoxic and developmental effects. WARNING: This chemical is
known to the State of California to cause cancer.
Acute toxicity:
Ingestion: May be harmful or fatal if swallowed.
Skin Corrosion/Irritation:
Causes skin irritation
Serious eye damage/irritation:
Causes serious eye irritation
Germ cell mutagenicity:
No data available
Respiratory/Skin Sensitization:
Slightly irritating to respiratory system.
Carcinogenicity:
Suspected of causing cancer (state route of exposure if it is conclusively proven that no other routes of exposure c ause the hazard)
Reproductive toxicity:
Suspected of damaging fertility or the unborn child.
Specific Target Organ Toxicity – Repeated Exposure:
May cause damage to organs through prolonged or repeated exposure.
Specific Target Organ Toxicity – Single Exposure:
No data available
Aspiration hazard:
May be fatal if swallowed and enters airways
Xylene
Page 7 of 9 www.aglayne.com
0000108-88-3 TOLUENE
Increased susceptibility to the effects of this material may be observed in people with preexisting disease of any of the following: central
nervous system, kidneys, liver, respiratory system, skin. Can be absorbed through the skin in harmful amounts. Recurrent
overexposure may result in liver and kidney injury. High airborne levels have produced irregular heart beats in animals and occasional
palpitations in humans. Rats exposed to very high airborne levels have exhibited high frequency hearing deficits. The significance of
this to man is unknown. WARNING: This chemical is known to the State of California to cause birth defects or other reproductive harm.
0001330-20-7 XYLENE
Increased susceptibility to the effects of this material may be observed in people with preexisting disease of any of the following: bone
marrow, cardiovascular system, central nervous system, kidneys, liver, lungs. Recurrent overexposure may result in liver and kidney
injury. High exposures may produce irregular heart beats. Canada classifies Xylene as a developmental toxin as high exposures to
xylenes in some animal studies have been reported to cause health effects on the developing fetus/embryo. These effects were often at
levels toxic to the adult animal. The significance of these effects to humans is not known. Repeated or prolonged skin contact may
cause any of the following: irritation, dryness, cracking of the skin.
SECTION 12) ECOLOGICAL INFORMATION
Bio-accumulative Potential:
No data available.
Persistence and Degradability:
No data available.
Mobility in Soil:
No data available.
Toxicity:
Harmful to aquatic life
Other adverse effects:
No data available.
SECTION 13) DISPOSAL CONSIDERATIONS
Waste Disposal Method:
Under RCRA it is the responsibility of the user of the product to determine at the time of disposal whether the product meets RCRA criteria
for hazardous waste. Waste management should be in full compliance with federal, state and local laws.
Empty Containers retain product residue which may exhibit hazards of material, therefore do not pressurize, cut, glaze, weld or use for any
other purposes. Return drums to reclamation centers for proper cleaning and reuse.
SECTION 14) TRANSPORT INFORMATION
U.S. DOT Information:
UN1307, Xylenes, 3, PG II
Emergency Response Guide (ERG):
Emergency Response Guide 130
SECTION 15) REGULATORY INFORMATION
CAS Chemical Name % By Weight Regulation List
0001330-20-7 XYLENE 64% – 96% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,RCRA,CA_TAC_TOX,NEI – National Emissions
Inventory,OSHA
0000100-41-4 ETHYLBENZENE 16% – 24% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,CA_TAC_TOX,CA_Carcinogen,NEI – National
Emissions Inventory,CA_Prop65 – California Proposition 65,CA_Prop65_Type_Toxicity_Cancer –
CA_Proposition65_Type_Toxicity_Cancer,OSHA
0000108-88-3 TOLUENE 0.482% – 0.502% CERCLA,SARA312,SARA313,VOC,IARCCarcinogen,TSCA,RCRA,CA_TAC_TOX,NEI – National Emissions
Inventory,CA_Prop65 – California Proposition 65,CA_Prop65_Type_Toxicity_Develop –
CA_Proposition65_Type_Toxicity_Developmental,OSHA
SECTION 16) OTHER INFORMATION
Xylene
Page 8 of 9 www.aglayne.com
General:
A.G. Layne, Inc. urges each customer or recipient of this SDS to study it carefully and consult appropriate expertise, as necessary or
appropriate, to become aware of and understand the data contained in this SDS and any hazards associated with the product. It is the
Buyer’s/User’s responsibility to ensure that his activities comply with all Federal, State, Provincial or Local laws. The information presented
here pertains only to the product as shipped. The information contained herein is based on our current knowledge of the underlying data
and is intended to describe the product for the purpose of health, safety and environmental requirements only. NO warranty or guarantee
is expressed or implied regarding the accuracy of this data or the results to be obtained from the use of the product.
3
1
H
0
HMIS
Chronic :
Version 1.1:
Change in Section 8
DISCLAIMER
To the best of our knowledge, the information contained herein is accurate. However, neither A. G. Layne, Inc. nor any of its subsidiaries assumes
any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the
sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are
described herein, we cannot guarantee that these are the only hazards that exist. The above information pertains to this product as currently
formulated, and is based on the information available at this time. Addition of reducers or other additives to this product may substantially alter the
composition and hazards of the product. Since conditions of use are outside our control, we make no warranties, express or implied, and assume
no liability in connection with any use of this information.
Xylene
Page 9 of 9 www.aglayne.com
by | Sep 27, 2025
